RAID1 vs RAID10
I have just discovered, that RAID1 is possible with more than 2 devices:
https://btrfs.readthedocs.io/en/latest/mkfs.btrfs.html#profiles
What is the difference to RAID10?
I have 4 x 3.8 TB SSD and want one filesystem.
Signature · 6 lines
Ullrich Horlacher Server und Virtualisierung Rechenzentrum TIK Universitaet Stuttgart E-Mail: [email protected] Allmandring 30a Tel: ++49-711-68565868 70569 Stuttgart (Germany) WWW: https://www.tik.uni-stuttgart.de/ REF:<[email protected]>
Quoted 7 lines · Ulli Horlacher
I have just discovered, that RAID1 is possible with more than 2 devices:
https://btrfs.readthedocs.io/en/latest/mkfs.btrfs.html#profiles
What is the difference to RAID10?
I have 4 x 3.8 TB SSD and want one filesystem.
For regular btrfs RAID, if you have more than 2 devices, btrfs will "decluster" the data on these devices (depending on how much free space is available). Then there is the multi copy RAID1 (RAID1C3 and RAID1C4) which will make 2 or 3 (depending on the level) copies of the data instead of 1.
RAID10 is the usual 4 (or more see above) drives, combine 2 into a stripe set and mirror inside the stripe set.
Hope that helps,
Johannes
Quoted 8 lines · Ulli Horlacher
I have just discovered, that RAID1 is possible with more than 2 devices:
https://btrfs.readthedocs.io/en/latest/mkfs.btrfs.html#profiles
What is the difference to RAID10?
In RAID1 each chunk (copy) is located on a single disk. In RAID10 each chunk (copy) is striped across multiple disks.
Quoted 8 lines · Andrei Borzenkov
Quoted 6 lines · Ulli Horlacher
I have just discovered, that RAID1 is possible with more than 2 devices:
https://btrfs.readthedocs.io/en/latest/mkfs.btrfs.html#profiles
Quoted 7 lines
Quoted 2 lines
What is the difference to RAID10?
In RAID1 each chunk (copy) is located on a single disk. In RAID10 each chunk (copy) is striped across multiple disks.
Does the RAID10 profile still have equivalent read-speed to RAID1 profile on recent (>=6.12) kernels? Last I looked into it both were still limited to the speed of a single-device.
Regards,
Nicholas
Quoted 13 lines · Nicholas D Steeves
Quoted 11 lines · Andrei Borzenkov
Quoted 8 lines · Ulli Horlacher
I have just discovered, that RAID1 is possible with more than 2 devices:
https://btrfs.readthedocs.io/en/latest/mkfs.btrfs.html#profiles
What is the difference to RAID10?
Quoted 9 lines
Quoted 4 lines
In RAID1 each chunk (copy) is located on a single disk. In RAID10 each chunk (copy) is striped across multiple disks.
Does the RAID10 profile still have equivalent read-speed to RAID1 profile on recent (>=6.12) kernels? Last I looked into it both were still limited to the speed of a single-device.
This is true for any single stream IO pattern unless it is using very large blocks.
To parallelize the single stream IO the stripe width (stripe element size, strip size) needs to be small enough. OTOH it will kill sequential IO.