Add pinctrl support for Sky1
Subsystems (4)
Gary Yang
maintainerv5 cover Add pinctrl support for Sky1
Patch 1: Add dt-binding doc for pinctrl on Sky1
Patch 2: Add pin-controller driver for sky1
Patch 3: Add pinctrl nodes for sky1
Changes for v5:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-pinctrl.yaml scripts/checkpatch.pl 000*.patch
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
- Drop DS_LEVELX macro
- Fix dt-bindings style
- Fix build warning
Changes for v4:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-pinctrl.yaml scripts/checkpatch.pl 000*.patch
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
- support driver_strength = <8> (mA)
- Fix dt-bindings style
Changes for v3:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-pinctrl.yaml scripts/checkpatch.pl 000*.patch
make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
- Re-order the patch set, and move dt-bindings to the 1st patch.
- Refine the pinctrl driver with SKY_PINFUNCTION macro
- Fix warnings when make dt_binding_check
Changes for v2:
- restructure the pinctrl driver to support pinmux=<..>
- redefine pinmux macros
- move header file from dt-bindings to dts
- fix the code-style issues
Gary Yang (3):
dt-bindings: pinctrl: Add cix,sky1-pinctrl
pinctrl: cix: Add pin-controller support for sky1
arm64: dts: cix: Add pinctrl nodes for sky1
.../bindings/pinctrl/cix,sky1-pinctrl.yaml | 92 +++ arch/arm64/boot/dts/cix/sky1-orion-o6.dts | 32 + arch/arm64/boot/dts/cix/sky1-pinfunc.h | 401 ++++++++++++ arch/arm64/boot/dts/cix/sky1.dtsi | 10 + drivers/pinctrl/Kconfig | 1 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/cix/Kconfig | 14 + drivers/pinctrl/cix/Makefile | 4 + drivers/pinctrl/cix/pinctrl-sky1-base.c | 573 ++++++++++++++++++ drivers/pinctrl/cix/pinctrl-sky1.c | 559 +++++++++++++++++ drivers/pinctrl/cix/pinctrl-sky1.h | 48 ++ 11 files changed, 1735 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/cix,sky1-pinctrl.yaml create mode 100644 arch/arm64/boot/dts/cix/sky1-pinfunc.h create mode 100644 drivers/pinctrl/cix/Kconfig create mode 100644 drivers/pinctrl/cix/Makefile create mode 100644 drivers/pinctrl/cix/pinctrl-sky1-base.c create mode 100644 drivers/pinctrl/cix/pinctrl-sky1.c create mode 100644 drivers/pinctrl/cix/pinctrl-sky1.h
Signature · 1 line
2.49.0
Gary Yang
maintainerPATCH v5 1/3 dt-bindings: pinctrl: Add cix,sky1-pinctrl
The pin-controller is used to control the Soc pins. There are two pin-controllers on Cix Sky1 platform. One is used under S0 state, the other is used under S0 and S5 state.
--- .../bindings/pinctrl/cix,sky1-pinctrl.yaml | 92 +++++++++++++++++++ 1 file changed, 92 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/cix,sky1-pinctrl.yaml
Documentation/devicetree/bindings/pinctrl/cix,sky1-pinctrl.yaml new file +92 -0
@@ -0,0 +1,92 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/cix,sky1-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cix Sky1 Soc Pin Controller + +maintainers: + - Gary Yang <[email protected]> + +description: + The pin-controller is used to control Soc pins. There are two pin-controllers + on Cix Sky1 platform. one is used under S0 state, the other one is used under + S0 and S5 state. + +properties: + compatible: + enum: + - cix,sky1-pinctrl + - cix,sky1-pinctrl-s5 + + reg: + items: + - description: gpio base + +patternProperties: + '-cfg$': + type: object + additionalProperties: false + + description: + A pinctrl node should contain at least one subnode representing the + pinctrl groups available on the machine. + + patternProperties: + 'pins$': + type: object + additionalProperties: false + + description: + Each subnode will list the pins it needs, and how they should + be configured, with regard to muxer configuration, bias pull, + and drive strength. + + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + properties: + pinmux: + description: + Values are constructed from pin number and mux setting, pin + number is left shifted by 8 bits, then ORed with mux setting + + bias-disable: true + + bias-pull-up: true + + bias-pull-down: true + + drive-strength: + description: + typical current when output high level. + enum: [ 2, 3, 5, 6, 8, 9, 11, 12, 13, 14, 17, 18, 20, 21, 23, + 24 ] + + + required: + - pinmux + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #define CIX_PAD_GPIO012_FUNC_GPIO012 (11 << 8 | 0x0) + pinctrl@4170000 { + compatible = "cix,sky1-pinctrl"; + reg = <0x4170000 0x1000>; + + wifi_vbat_gpio: wifi-vbat-gpio-cfg { + pins { + pinmux = <CIX_PAD_GPIO012_FUNC_GPIO012>; + bias-pull-up; + drive-strength = <8>; + }; + }; + };
Signature · 1 line
2.49.0
Re: [PATCH v5 1/3] dt-bindings: pinctrl: Add cix,sky1-pinctrl
Quoted 6 lines · Gary Yang
The pin-controller is used to control the Soc pins. There are two pin-controllers on Cix Sky1 platform. One is used under S0 state, the other is used under S0 and S5 state.
Signed-off-by Gary Yang <[email protected]>
pw-bot: not-applicable
Gary Yang
maintainerPATCH v5 2/3 pinctrl: cix: Add pin-controller support for sky1
In reply to Gary YangThere are two pin-controllers on Cix Sky1 platform.
one is used under S0 state, the other is used under S0 and S5 state.
--- drivers/pinctrl/Kconfig | 1 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/cix/Kconfig | 14 + drivers/pinctrl/cix/Makefile | 4 + drivers/pinctrl/cix/pinctrl-sky1-base.c | 573 ++++++++++++++++++++++++ drivers/pinctrl/cix/pinctrl-sky1.c | 559 +++++++++++++++++++++++ drivers/pinctrl/cix/pinctrl-sky1.h | 48 ++ 7 files changed, 1200 insertions(+) create mode 100644 drivers/pinctrl/cix/Kconfig create mode 100644 drivers/pinctrl/cix/Makefile create mode 100644 drivers/pinctrl/cix/pinctrl-sky1-base.c create mode 100644 drivers/pinctrl/cix/pinctrl-sky1.c create mode 100644 drivers/pinctrl/cix/pinctrl-sky1.h
drivers/pinctrl/Kconfig +1 -0
@@ -686,6 +686,7 @@ source "drivers/pinctrl/aspeed/Kconfig" source "drivers/pinctrl/bcm/Kconfig" source "drivers/pinctrl/berlin/Kconfig" source "drivers/pinctrl/cirrus/Kconfig" +source "drivers/pinctrl/cix/Kconfig" source "drivers/pinctrl/freescale/Kconfig" source "drivers/pinctrl/intel/Kconfig" source "drivers/pinctrl/mediatek/Kconfig"
drivers/pinctrl/Makefile +1 -0
@@ -69,6 +69,7 @@ obj-$(CONFIG_ARCH_ASPEED) += aspeed/ obj-y += bcm/ obj-$(CONFIG_PINCTRL_BERLIN) += berlin/ obj-y += cirrus/ +obj-y += cix/ obj-y += freescale/ obj-$(CONFIG_X86) += intel/ obj-y += mediatek/
drivers/pinctrl/cix/Kconfig new file +14 -0
@@ -0,0 +1,14 @@ +# SPDX-License-Identifier: GPL-2.0-only +config PINCTRL_SKY1_BASE + tristate + select GENERIC_PINCTRL_GROUPS + select GENERIC_PINMUX_FUNCTIONS + select GENERIC_PINCONF + select REGMAP + +config PINCTRL_SKY1 + tristate "Cix Sky1 pinctrl driver" + depends on ARCH_CIX || COMPILE_TEST + select PINCTRL_SKY1_BASE + help + Say Y here to enable the sky1 pinctrl driver
drivers/pinctrl/cix/Makefile new file +4 -0
@@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 +# Cix Sky1 pin control drivers +obj-$(CONFIG_PINCTRL_SKY1_BASE) += pinctrl-sky1-base.o +obj-$(CONFIG_PINCTRL_SKY1) += pinctrl-sky1.o
drivers/pinctrl/cix/pinctrl-sky1-base.c new file +573 -0
573 lines not on this page · raw message
drivers/pinctrl/cix/pinctrl-sky1.c new file +559 -0
559 lines not on this page · raw message
drivers/pinctrl/cix/pinctrl-sky1.h new file +48 -0
48 lines not on this page · raw message
Signature · 1 line
2.49.0
Gary Yang
maintainerPATCH v5 3/3 arm64: dts: cix: Add pinctrl nodes for sky1
In reply to Gary YangAdd the pin-controller nodes for Sky1 platform.
--- arch/arm64/boot/dts/cix/sky1-orion-o6.dts | 32 ++ arch/arm64/boot/dts/cix/sky1-pinfunc.h | 401 ++++++++++++++++++++++ arch/arm64/boot/dts/cix/sky1.dtsi | 10 + 3 files changed, 443 insertions(+) create mode 100644 arch/arm64/boot/dts/cix/sky1-pinfunc.h
arch/arm64/boot/dts/cix/sky1-orion-o6.dts +32 -0
@@ -7,6 +7,8 @@ /dts-v1/; #include "sky1.dtsi" +#include "sky1-pinfunc.h" + / { model = "Radxa Orion O6"; compatible = "radxa,orion-o6", "cix,sky1";
@@ -34,6 +36,36 @@ linux,cma { }; +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hog-cfg { + pins { + pinmux = <CIX_PAD_GPIO144_FUNC_GPIO144>, + <CIX_PAD_GPIO145_FUNC_GPIO145>, + <CIX_PAD_GPIO146_FUNC_GPIO146>, + <CIX_PAD_GPIO147_FUNC_GPIO147>; + bias-pull-down; + drive-strength = <8>; + }; + }; +}; + +&iomuxc_s5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_s5>; + + pinctrl_hog_s5: hog-s5-cfg { + pins { + pinmux = <CIX_PAD_GPIO014_FUNC_GPIO014>; + bias-pull-up; + drive-strength = <8>; + + }; + }; +}; + &uart2 { status = "okay"; };
arch/arm64/boot/dts/cix/sky1-pinfunc.h new file +401 -0
401 lines not on this page · raw message
arch/arm64/boot/dts/cix/sky1.dtsi +10 -0
@@ -328,6 +328,11 @@ i3c1: i3c@4100000 { status = "disabled"; }; + iomuxc: pinctrl@4170000 { + compatible = "cix,sky1-pinctrl"; + reg = <0x0 0x04170000 0x0 0x1000>; + }; + mbox_ap2se: mailbox@5060000 { compatible = "cix,sky1-mbox"; reg = <0x0 0x05060000 0x0 0x10000>;
@@ -416,6 +421,11 @@ ppi_partition1: interrupt-partition-1 { }; }; }; + + iomuxc_s5: pinctrl@16007000 { + compatible = "cix,sky1-pinctrl-s5"; + reg = <0x0 0x16007000 0x0 0x1000>; + }; }; timer {
Signature · 1 line
2.49.0
Peter Chen
AppliedRe: [PATCH v5 3/3] arm64: dts: cix: Add pinctrl nodes for sky1
Quoted 3 lines · Gary Yang
Add the pin-controller nodes for Sky1 platform.
Signed-off-by Gary Yang <[email protected]>
Applied, thanks.
Peter
Quoted 495 lines
--- arch/arm64/boot/dts/cix/sky1-orion-o6.dts | 32 ++ arch/arm64/boot/dts/cix/sky1-pinfunc.h | 401 ++++++++++++++++++++++ arch/arm64/boot/dts/cix/sky1.dtsi | 10 + 3 files changed, 443 insertions(+) create mode 100644 arch/arm64/boot/dts/cix/sky1-pinfunc.harch/arm64/boot/dts/cix/sky1-orion-o6.dts +32
-0@@ -7,6 +7,8 @@ /dts-v1/; #include "sky1.dtsi" +#include "sky1-pinfunc.h" + / { model = "Radxa Orion O6"; compatible = "radxa,orion-o6", "cix,sky1";@@ -34,6 +36,36 @@ linux,cma { }; +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hog-cfg { + pins { + pinmux = <CIX_PAD_GPIO144_FUNC_GPIO144>, + <CIX_PAD_GPIO145_FUNC_GPIO145>, + <CIX_PAD_GPIO146_FUNC_GPIO146>, + <CIX_PAD_GPIO147_FUNC_GPIO147>; + bias-pull-down; + drive-strength = <8>; + }; + }; +}; + +&iomuxc_s5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_s5>; + + pinctrl_hog_s5: hog-s5-cfg { + pins { + pinmux = <CIX_PAD_GPIO014_FUNC_GPIO014>; + bias-pull-up; + drive-strength = <8>; + + }; + }; +}; + &uart2 { status = "okay"; };arch/arm64/boot/dts/cix/sky1-pinfunc.h new file +401
-0@@ -0,0 +1,401 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* +* Copyright 2024-2025 Cix Technology Group Co., Ltd. +*/ + +#ifndef __CIX_SKY1_H +#define __CIX_SKY1_H + +/* s5 pads */ +#define CIX_PAD_GPIO001_FUNC_GPIO001 (0 << 8 | 0x0) +#define CIX_PAD_GPIO002_FUNC_GPIO002 (1 << 8 | 0x0) +#define CIX_PAD_GPIO003_FUNC_GPIO003 (2 << 8 | 0x0) +#define CIX_PAD_GPIO004_FUNC_GPIO004 (3 << 8 | 0x0) +#define CIX_PAD_GPIO005_FUNC_GPIO005 (4 << 8 | 0x0) +#define CIX_PAD_GPIO006_FUNC_GPIO006 (5 << 8 | 0x0) +#define CIX_PAD_GPIO007_FUNC_GPIO007 (6 << 8 | 0x0) +#define CIX_PAD_GPIO008_FUNC_GPIO008 (7 << 8 | 0x0) +#define CIX_PAD_GPIO009_FUNC_GPIO009 (8 << 8 | 0x0) +#define CIX_PAD_GPIO010_FUNC_GPIO010 (9 << 8 | 0x0) +#define CIX_PAD_GPIO011_FUNC_GPIO011 (10 << 8 | 0x0) +#define CIX_PAD_GPIO012_FUNC_GPIO012 (11 << 8 | 0x0) +#define CIX_PAD_GPIO013_FUNC_GPIO013 (12 << 8 | 0x0) +#define CIX_PAD_GPIO014_FUNC_GPIO014 (13 << 8 | 0x0) +#define CIX_PAD_SFI_I2C0_SCL_FUNC_SFI_I2C0_SCL (28 << 8 | 0x0) +#define CIX_PAD_SFI_I2C0_SCL_FUNC_SFI_I3C0_SCL (28 << 8 | 0x1) +#define CIX_PAD_SFI_I2C0_SDA_FUNC_SFI_I2C0_SDA (29 << 8 | 0x0) +#define CIX_PAD_SFI_I2C0_SDA_FUNC_SFI_I3C0_SDA (29 << 8 | 0x1) +#define CIX_PAD_SFI_I2C1_SCL_FUNC_SFI_I2C1_SCL (30 << 8 | 0x0) +#define CIX_PAD_SFI_I2C1_SCL_FUNC_SFI_I3C1_SCL (30 << 8 | 0x1) +#define CIX_PAD_SFI_I2C1_SCL_FUNC_SFI_SPI_CS0 (30 << 8 | 0x2) +#define CIX_PAD_SFI_I2C1_SDA_FUNC_SFI_I2C1_SDA (31 << 8 | 0x0) +#define CIX_PAD_SFI_I2C1_SDA_FUNC_SFI_I3C1_SDA (31 << 8 | 0x1) +#define CIX_PAD_SFI_I2C1_SDA_FUNC_SFI_SPI_CS1 (31 << 8 | 0x2) +#define CIX_PAD_SFI_GPIO0_FUNC_GPIO015 (32 << 8 | 0x0) +#define CIX_PAD_SFI_GPIO0_FUNC_SFI_SPI_SCK (32 << 8 | 0x1) +#define CIX_PAD_SFI_GPIO0_FUNC_SFI_GPIO0 (32 << 8 | 0x2) +#define CIX_PAD_SFI_GPIO1_FUNC_GPIO016 (33 << 8 | 0x0) +#define CIX_PAD_SFI_GPIO1_FUNC_SFI_SPI_MOSI (33 << 8 | 0x1) +#define CIX_PAD_SFI_GPIO1_FUNC_SFI_GPIO1 (33 << 8 | 0x2) +#define CIX_PAD_SFI_GPIO2_FUNC_GPIO017 (34 << 8 | 0x0) +#define CIX_PAD_SFI_GPIO2_FUNC_SFI_SPI_MISO (34 << 8 | 0x1) +#define CIX_PAD_SFI_GPIO2_FUNC_SFI_GPIO2 (34 << 8 | 0x2) +#define CIX_PAD_GPIO018_FUNC_SFI_GPIO3 (35 << 8 | 0x0) +#define CIX_PAD_GPIO018_FUNC_GPIO018 (35 << 8 | 0x1) +#define CIX_PAD_GPIO019_FUNC_SFI_GPIO4 (36 << 8 | 0x0) +#define CIX_PAD_GPIO019_FUNC_GPIO019 (36 << 8 | 0x1) +#define CIX_PAD_GPIO020_FUNC_SFI_GPIO5 (37 << 8 | 0x0) +#define CIX_PAD_GPIO020_FUNC_GPIO020 (37 << 8 | 0x1) +#define CIX_PAD_GPIO021_FUNC_SFI_GPIO6 (38 << 8 | 0x0) +#define CIX_PAD_GPIO021_FUNC_GPIO021 (38 << 8 | 0x1) +#define CIX_PAD_GPIO022_FUNC_SFI_GPIO7 (39 << 8 | 0x0) +#define CIX_PAD_GPIO022_FUNC_GPIO022 (39 << 8 | 0x1) +#define CIX_PAD_GPIO023_FUNC_SFI_GPIO8 (40 << 8 | 0x0) +#define CIX_PAD_GPIO023_FUNC_GPIO023 (40 << 8 | 0x1) +#define CIX_PAD_GPIO023_FUNC_SFI_I3C0_PUR_EN_L (40 << 8 | 0x2) +#define CIX_PAD_GPIO024_FUNC_SFI_GPIO9 (41 << 8 | 0x0) +#define CIX_PAD_GPIO024_FUNC_GPIO024 (41 << 8 | 0x1) +#define CIX_PAD_GPIO024_FUNC_SFI_I3C1_PUR_EN_L (41 << 8 | 0x2) +#define CIX_PAD_SPI1_MISO_FUNC_SPI1_MISO (42 << 8 | 0x0) +#define CIX_PAD_SPI1_MISO_FUNC_GPIO025 (42 << 8 | 0x1) +#define CIX_PAD_SPI1_CS0_FUNC_SPI1_CS0 (43 << 8 | 0x0) +#define CIX_PAD_SPI1_CS0_FUNC_GPIO026 (43 << 8 | 0x1) +#define CIX_PAD_SPI1_CS1_FUNC_SPI1_CS1 (44 << 8 | 0x0) +#define CIX_PAD_SPI1_CS1_FUNC_GPIO027 (44 << 8 | 0x1) +#define CIX_PAD_SPI1_MOSI_FUNC_SPI1_MOSI (45 << 8 | 0x0) +#define CIX_PAD_SPI1_MOSI_FUNC_GPIO028 (45 << 8 | 0x1) +#define CIX_PAD_SPI1_CLK_FUNC_SPI1_CLK (46 << 8 | 0x0) +#define CIX_PAD_SPI1_CLK_FUNC_GPIO029 (46 << 8 | 0x1) +#define CIX_PAD_GPIO030_FUNC_GPIO030 (47 << 8 | 0x0) +#define CIX_PAD_GPIO030_FUNC_USB_OC0_L (47 << 8 | 0x1) +#define CIX_PAD_GPIO031_FUNC_GPIO031 (48 << 8 | 0x0) +#define CIX_PAD_GPIO031_FUNC_USB_OC1_L (48 << 8 | 0x1) +#define CIX_PAD_GPIO032_FUNC_GPIO032 (49 << 8 | 0x0) +#define CIX_PAD_GPIO032_FUNC_USB_OC2_L (49 << 8 | 0x1) +#define CIX_PAD_GPIO033_FUNC_GPIO033 (50 << 8 | 0x0) +#define CIX_PAD_GPIO033_FUNC_USB_OC3_L (50 << 8 | 0x1) +#define CIX_PAD_GPIO034_FUNC_GPIO034 (51 << 8 | 0x0) +#define CIX_PAD_GPIO034_FUNC_USB_OC4_L (51 << 8 | 0x1) +#define CIX_PAD_GPIO035_FUNC_GPIO035 (52 << 8 | 0x0) +#define CIX_PAD_GPIO035_FUNC_USB_OC5_L (52 << 8 | 0x1) +#define CIX_PAD_GPIO036_FUNC_GPIO036 (53 << 8 | 0x0) +#define CIX_PAD_GPIO036_FUNC_USB_OC6_L (53 << 8 | 0x1) +#define CIX_PAD_GPIO037_FUNC_GPIO037 (54 << 8 | 0x0) +#define CIX_PAD_GPIO037_FUNC_USB_OC7_L (54 << 8 | 0x1) +#define CIX_PAD_GPIO038_FUNC_GPIO038 (55 << 8 | 0x0) +#define CIX_PAD_GPIO038_FUNC_USB_OC8_L (55 << 8 | 0x1) +#define CIX_PAD_GPIO039_FUNC_GPIO039 (56 << 8 | 0x0) +#define CIX_PAD_GPIO039_FUNC_USB_OC9_L (56 << 8 | 0x1) +#define CIX_PAD_GPIO040_FUNC_GPIO040 (57 << 8 | 0x0) +#define CIX_PAD_GPIO040_FUNC_USB_DRIVE_VBUS0 (57 << 8 | 0x1) +#define CIX_PAD_GPIO041_FUNC_GPIO041 (58 << 8 | 0x0) +#define CIX_PAD_GPIO041_FUNC_USB_DRIVE_VBUS4 (58 << 8 | 0x1) +#define CIX_PAD_GPIO042_FUNC_GPIO042 (59 << 8 | 0x0) +#define CIX_PAD_GPIO042_FUNC_USB_DRIVE_VBUS5 (59 << 8 | 0x1) +#define CIX_PAD_SE_QSPI_CLK_FUNC_SE_QSPI_CLK (60 << 8 | 0x0) +#define CIX_PAD_SE_QSPI_CLK_FUNC_QSPI_CLK (60 << 8 | 0x1) +#define CIX_PAD_SE_QSPI_CS_L_FUNC_SE_QSPI_CS_L (61 << 8 | 0x0) +#define CIX_PAD_SE_QSPI_CS_L_FUNC_QSPI_CS_L (61 << 8 | 0x1) +#define CIX_PAD_SE_QSPI_DATA0_FUNC_SE_QSPI_DATA0 (62 << 8 | 0x0) +#define CIX_PAD_SE_QSPI_DATA0_FUNC_QSPI_DATA0 (62 << 8 | 0x1) +#define CIX_PAD_SE_QSPI_DATA1_FUNC_SE_QSPI_DATA1 (63 << 8 | 0x0) +#define CIX_PAD_SE_QSPI_DATA1_FUNC_QSPI_DATA1 (63 << 8 | 0x1) +#define CIX_PAD_SE_QSPI_DATA2_FUNC_SE_QSPI_DATA2 (64 << 8 | 0x0) +#define CIX_PAD_SE_QSPI_DATA2_FUNC_QSPI_DATA2 (64 << 8 | 0x1) +#define CIX_PAD_SE_QSPI_DATA3_FUNC_SE_QSPI_DATA3 (65 << 8 | 0x0) +#define CIX_PAD_SE_QSPI_DATA3_FUNC_QSPI_DATA3 (65 << 8 | 0x1) +/* s0 pads */ +#define CIX_PAD_GPIO043_FUNC_GPIO043 (0 << 8 | 0x0) +#define CIX_PAD_GPIO044_FUNC_GPIO044 (1 << 8 | 0x0) +#define CIX_PAD_GPIO045_FUNC_GPIO045 (2 << 8 | 0x0) +#define CIX_PAD_GPIO046_FUNC_GPIO046 (3 << 8 | 0x0) +#define CIX_PAD_DP2_DIGON_FUNC_DP2_DIGON (18 << 8 | 0x0) +#define CIX_PAD_DP2_BLON_FUNC_DP2_BLON (19 << 8 | 0x0) +#define CIX_PAD_DP2_VARY_BL_FUNC_DP2_VARY_BL (20 << 8 | 0x0) +#define CIX_PAD_I2C7_SCL_FUNC_I2C7_SCL (21 << 8 | 0x0) +#define CIX_PAD_I2C7_SDA_FUNC_I2C7_SDA (22 << 8 | 0x0) +#define CIX_PAD_I2C5_SCL_FUNC_I2C5_SCL (26 << 8 | 0x0) +#define CIX_PAD_I2C5_SCL_FUNC_GPIO047 (26 << 8 | 0x1) +#define CIX_PAD_I2C5_SDA_FUNC_I2C5_SDA (27 << 8 | 0x0) +#define CIX_PAD_I2C5_SDA_FUNC_GPIO048 (27 << 8 | 0x1) +#define CIX_PAD_I2C6_SCL_FUNC_I2C6_SCL (28 << 8 | 0x0) +#define CIX_PAD_I2C6_SCL_FUNC_GPIO049 (28 << 8 | 0x1) +#define CIX_PAD_I2C6_SDA_FUNC_I2C6_SDA (29 << 8 | 0x0) +#define CIX_PAD_I2C6_SDA_FUNC_GPIO050 (29 << 8 | 0x1) +#define CIX_PAD_I2C0_CLK_FUNC_I2C0_CLK (30 << 8 | 0x0) +#define CIX_PAD_I2C0_CLK_FUNC_GPIO051 (30 << 8 | 0x1) +#define CIX_PAD_I2C0_SDA_FUNC_I2C0_SDA (31 << 8 | 0x0) +#define CIX_PAD_I2C0_SDA_FUNC_GPIO052 (31 << 8 | 0x1) +#define CIX_PAD_I2C1_CLK_FUNC_I2C1_CLK (32 << 8 | 0x0) +#define CIX_PAD_I2C1_CLK_FUNC_GPIO053 (32 << 8 | 0x1) +#define CIX_PAD_I2C1_SDA_FUNC_I2C1_SDA (33 << 8 | 0x0) +#define CIX_PAD_I2C1_SDA_FUNC_GPIO054 (33 << 8 | 0x1) +#define CIX_PAD_I2C2_SCL_FUNC_I2C2_SCL (34 << 8 | 0x0) +#define CIX_PAD_I2C2_SCL_FUNC_I3C0_SCL (34 << 8 | 0x1) +#define CIX_PAD_I2C2_SCL_FUNC_GPIO055 (34 << 8 | 0x2) +#define CIX_PAD_I2C2_SDA_FUNC_I2C2_SDA (35 << 8 | 0x0) +#define CIX_PAD_I2C2_SDA_FUNC_I3C0_SDA (35 << 8 | 0x1) +#define CIX_PAD_I2C2_SDA_FUNC_GPIO056 (35 << 8 | 0x2) +#define CIX_PAD_GPIO057_FUNC_GPIO057 (36 << 8 | 0x0) +#define CIX_PAD_GPIO057_FUNC_I3C0_PUR_EN_L (36 << 8 | 0x1) +#define CIX_PAD_I2C3_CLK_FUNC_I2C3_CLK (37 << 8 | 0x0) +#define CIX_PAD_I2C3_CLK_FUNC_I3C1_CLK (37 << 8 | 0x1) +#define CIX_PAD_I2C3_CLK_FUNC_GPIO058 (37 << 8 | 0x2) +#define CIX_PAD_I2C3_SDA_FUNC_I2C3_SDA (38 << 8 | 0x0) +#define CIX_PAD_I2C3_SDA_FUNC_I3C1_SDA (38 << 8 | 0x1) +#define CIX_PAD_I2C3_SDA_FUNC_GPIO059 (38 << 8 | 0x2) +#define CIX_PAD_GPIO060_FUNC_GPIO060 (39 << 8 | 0x0) +#define CIX_PAD_GPIO060_FUNC_I3C1_PUR_EN_L (39 << 8 | 0x1) +#define CIX_PAD_I2C4_CLK_FUNC_I2C4_CLK (40 << 8 | 0x0) +#define CIX_PAD_I2C4_CLK_FUNC_GPIO061 (40 << 8 | 0x1) +#define CIX_PAD_I2C4_SDA_FUNC_I2C4_SDA (41 << 8 | 0x0) +#define CIX_PAD_I2C4_SDA_FUNC_GPIO062 (41 << 8 | 0x1) +#define CIX_PAD_HDA_BITCLK_FUNC_HDA_BITCLK (42 << 8 | 0x0) +#define CIX_PAD_HDA_BITCLK_FUNC_I2S0_SCK (42 << 8 | 0x1) +#define CIX_PAD_HDA_BITCLK_FUNC_I2S9_RSCK_DBG (42 << 8 | 0x2) +#define CIX_PAD_HDA_RST_L_FUNC_HDA_RST_L (43 << 8 | 0x0) +#define CIX_PAD_HDA_RST_L_FUNC_I2S0_DATA_IN (43 << 8 | 0x1) +#define CIX_PAD_HDA_RST_L_FUNC_I2S9_DATA_IN0_DBG (43 << 8 | 0x2) +#define CIX_PAD_HDA_SDIN0_FUNC_HDA_SDIN0 (44 << 8 | 0x0) +#define CIX_PAD_HDA_SDIN0_FUNC_I2S0_MCLK (44 << 8 | 0x1) +#define CIX_PAD_HDA_SDIN0_FUNC_I2S9_TSCK_DBG (44 << 8 | 0x2) +#define CIX_PAD_HDA_SDOUT0_FUNC_HDA_SDOUT0 (45 << 8 | 0x0) +#define CIX_PAD_HDA_SDOUT0_FUNC_I2S0_DATA_OUT (45 << 8 | 0x1) +#define CIX_PAD_HDA_SDOUT0_FUNC_I2S9_TWS_DBG (45 << 8 | 0x2) +#define CIX_PAD_HDA_SYNC_FUNC_HDA_SYNC (46 << 8 | 0x0) +#define CIX_PAD_HDA_SYNC_FUNC_I2S0_WS (46 << 8 | 0x1) +#define CIX_PAD_HDA_SYNC_FUNC_I2S9_RWS_DBG (46 << 8 | 0x2) +#define CIX_PAD_HDA_SDIN1_FUNC_HDA_SDIN1 (47 << 8 | 0x0) +#define CIX_PAD_HDA_SDIN1_FUNC_GPIO063 (47 << 8 | 0x1) +#define CIX_PAD_HDA_SDIN1_FUNC_I2S9_DATA_IN1_DBG (47 << 8 | 0x2) +#define CIX_PAD_HDA_SDOUT1_FUNC_HDA_SDOUT1 (48 << 8 | 0x0) +#define CIX_PAD_HDA_SDOUT1_FUNC_GPIO064 (48 << 8 | 0x1) +#define CIX_PAD_HDA_SDOUT1_FUNC_I2S9_DATA_OUT0_DBG (48 << 8 | 0x2) +#define CIX_PAD_I2S1_MCLK_FUNC_I2S1_MCLK (49 << 8 | 0x0) +#define CIX_PAD_I2S1_MCLK_FUNC_GPIO065 (49 << 8 | 0x1) +#define CIX_PAD_I2S1_SCK_FUNC_I2S1_SCK (50 << 8 | 0x0) +#define CIX_PAD_I2S1_SCK_FUNC_GPIO066 (50 << 8 | 0x1) +#define CIX_PAD_I2S1_WS_FUNC_I2S1_WS (51 << 8 | 0x0) +#define CIX_PAD_I2S1_WS_FUNC_GPIO067 (51 << 8 | 0x1) +#define CIX_PAD_I2S1_DATA_IN_FUNC_I2S1_DATA_IN (52 << 8 | 0x0) +#define CIX_PAD_I2S1_DATA_IN_FUNC_GPIO068 (52 << 8 | 0x1) +#define CIX_PAD_I2S1_DATA_OUT_FUNC_I2S1_DATA_OUT (53 << 8 | 0x0) +#define CIX_PAD_I2S1_DATA_OUT_FUNC_GPIO069 (53 << 8 | 0x1) +#define CIX_PAD_I2S2_MCLK_FUNC_I2S2_MCLK (54 << 8 | 0x0) +#define CIX_PAD_I2S2_MCLK_FUNC_GPIO070 (54 << 8 | 0x1) +#define CIX_PAD_I2S2_RSCK_FUNC_I2S2_RSCK (55 << 8 | 0x0) +#define CIX_PAD_I2S2_RSCK_FUNC_GPIO071 (55 << 8 | 0x1) +#define CIX_PAD_I2S2_RSCK_FUNC_I2S5_RSCK_DBG (55 << 8 | 0x2) +#define CIX_PAD_I2S2_RSCK_FUNC_I2S6_RSCK_DBG (55 << 8 | 0x3) +#define CIX_PAD_I2S2_RWS_FUNC_I2S2_RWS (56 << 8 | 0x0) +#define CIX_PAD_I2S2_RWS_FUNC_GPIO072 (56 << 8 | 0x1) +#define CIX_PAD_I2S2_RWS_FUNC_I2S5_RWS_DBG (56 << 8 | 0x2) +#define CIX_PAD_I2S2_RWS_FUNC_I2S6_RWS_DBG (56 << 8 | 0x3) +#define CIX_PAD_I2S2_TSCK_FUNC_I2S2_TSCK (57 << 8 | 0x0) +#define CIX_PAD_I2S2_TSCK_FUNC_GPIO073 (57 << 8 | 0x1) +#define CIX_PAD_I2S2_TSCK_FUNC_I2S5_TSCK_DBG (57 << 8 | 0x2) +#define CIX_PAD_I2S2_TSCK_FUNC_I2S6_TSCK_DBG (57 << 8 | 0x3) +#define CIX_PAD_I2S2_TWS_FUNC_I2S2_TWS (58 << 8 | 0x0) +#define CIX_PAD_I2S2_TWS_FUNC_GPIO074 (58 << 8 | 0x1) +#define CIX_PAD_I2S2_TWS_FUNC_I2S5_TWS_DBG (58 << 8 | 0x2) +#define CIX_PAD_I2S2_TWS_FUNC_I2S6_TWS_DBG (58 << 8 | 0x3) +#define CIX_PAD_I2S2_DATA_IN0_FUNC_I2S2_DATA_IN0 (59 << 8 | 0x0) +#define CIX_PAD_I2S2_DATA_IN0_FUNC_GPIO075 (59 << 8 | 0x1) +#define CIX_PAD_I2S2_DATA_IN0_FUNC_I2S5_DATA_IN0_DBG (59 << 8 | 0x2) +#define CIX_PAD_I2S2_DATA_IN0_FUNC_I2S6_DATA_IN0_DBG (59 << 8 | 0x3) +#define CIX_PAD_I2S2_DATA_IN1_FUNC_I2S2_DATA_IN1 (60 << 8 | 0x0) +#define CIX_PAD_I2S2_DATA_IN1_FUNC_GPIO076 (60 << 8 | 0x1) +#define CIX_PAD_I2S2_DATA_IN1_FUNC_I2S5_DATA_IN1_DBG (60 << 8 | 0x2) +#define CIX_PAD_I2S2_DATA_IN1_FUNC_I2S6_DATA_IN1_DBG (60 << 8 | 0x3) +#define CIX_PAD_I2S2_DATA_OUT0_FUNC_I2S2_DATA_OUT0 (61 << 8 | 0x0) +#define CIX_PAD_I2S2_DATA_OUT0_FUNC_GPIO077 (61 << 8 | 0x1) +#define CIX_PAD_I2S2_DATA_OUT0_FUNC_I2S5_DATA_OUT0_DBG (61 << 8 | 0x2) +#define CIX_PAD_I2S2_DATA_OUT0_FUNC_I2S6_DATA_OUT0_DBG (61 << 8 | 0x3) +#define CIX_PAD_I2S2_DATA_OUT1_FUNC_I2S2_DATA_OUT1 (62 << 8 | 0x0) +#define CIX_PAD_I2S2_DATA_OUT1_FUNC_GPIO078 (62 << 8 | 0x1) +#define CIX_PAD_I2S2_DATA_OUT1_FUNC_I2S5_DATA_OUT1_DBG (62 << 8 | 0x2) +#define CIX_PAD_I2S2_DATA_OUT1_FUNC_I2S6_DATA_OUT1_DBG (62 << 8 | 0x3) +#define CIX_PAD_I2S2_DATA_OUT2_FUNC_I2S2_DATA_OUT2 (63 << 8 | 0x0) +#define CIX_PAD_I2S2_DATA_OUT2_FUNC_GPIO079 (63 << 8 | 0x1) +#define CIX_PAD_I2S2_DATA_OUT3_FUNC_I2S2_DATA_OUT3 (64 << 8 | 0x0) +#define CIX_PAD_I2S2_DATA_OUT3_FUNC_GPIO080 (64 << 8 | 0x1) +#define CIX_PAD_I2S2_DATA_OUT3_FUNC_I2S9_DATA_OUT1_DBG (64 << 8 | 0x2) +#define CIX_PAD_I2S3_MCLK_FUNC_I2S3_MCLK (65 << 8 | 0x0) +#define CIX_PAD_I2S3_MCLK_FUNC_GPIO081 (65 << 8 | 0x1) +#define CIX_PAD_I2S3_RSCK_FUNC_I2S3_RSCK (66 << 8 | 0x0) +#define CIX_PAD_I2S3_RSCK_FUNC_GPIO082 (66 << 8 | 0x1) +#define CIX_PAD_I2S3_RSCK_FUNC_I2S7_RSCK_DBG (66 << 8 | 0x2) +#define CIX_PAD_I2S3_RSCK_FUNC_I2S8_RSCK_DBG (66 << 8 | 0x3) +#define CIX_PAD_I2S3_RWS_FUNC_I2S3_RWS (67 << 8 | 0x0) +#define CIX_PAD_I2S3_RWS_FUNC_GPIO083 (67 << 8 | 0x1) +#define CIX_PAD_I2S3_RWS_FUNC_I2S7_RWS_DBG (67 << 8 | 0x2) +#define CIX_PAD_I2S3_RWS_FUNC_I2S8_RWS_DBG (67 << 8 | 0x3) +#define CIX_PAD_I2S3_TSCK_FUNC_I2S3_TSCK (68 << 8 | 0x0) +#define CIX_PAD_I2S3_TSCK_FUNC_GPIO084 (68 << 8 | 0x1) +#define CIX_PAD_I2S3_TSCK_FUNC_I2S7_TSCK_DBG (68 << 8 | 0x2) +#define CIX_PAD_I2S3_TSCK_FUNC_I2S8_TSCK_DBG (68 << 8 | 0x3) +#define CIX_PAD_I2S3_TWS_FUNC_I2S3_TWS (69 << 8 | 0x0) +#define CIX_PAD_I2S3_TWS_FUNC_GPIO085 (69 << 8 | 0x1) +#define CIX_PAD_I2S3_TWS_FUNC_I2S7_TWS_DBG (69 << 8 | 0x2) +#define CIX_PAD_I2S3_TWS_FUNC_I2S8_TWS_DBG (69 << 8 | 0x3) +#define CIX_PAD_I2S3_DATA_IN0_FUNC_I2S3_DATA_IN0 (70 << 8 | 0x0) +#define CIX_PAD_I2S3_DATA_IN0_FUNC_GPIO086 (70 << 8 | 0x1) +#define CIX_PAD_I2S3_DATA_IN0_FUNC_I2S7_DATA_IN0_DBG (70 << 8 | 0x2) +#define CIX_PAD_I2S3_DATA_IN0_FUNC_I2S8_DATA_IN0_DBG (70 << 8 | 0x3) +#define CIX_PAD_I2S3_DATA_IN1_FUNC_I2S3_DATA_IN1 (71 << 8 | 0x0) +#define CIX_PAD_I2S3_DATA_IN1_FUNC_GPIO087 (71 << 8 | 0x1) +#define CIX_PAD_I2S3_DATA_IN1_FUNC_I2S7_DATA_IN1_DBG (71 << 8 | 0x2) +#define CIX_PAD_I2S3_DATA_IN1_FUNC_I2S8_DATA_IN1_DBG (71 << 8 | 0x3) +#define CIX_PAD_I2S3_DATA_OUT0_FUNC_I2S3_DATA_OUT0 (72 << 8 | 0x0) +#define CIX_PAD_I2S3_DATA_OUT0_FUNC_GPIO088 (72 << 8 | 0x1) +#define CIX_PAD_I2S3_DATA_OUT0_FUNC_I2S7_DATA_OUT0_DBG (72 << 8 | 0x2) +#define CIX_PAD_I2S3_DATA_OUT0_FUNC_I2S8_DATA_OUT0_DBG (72 << 8 | 0x3) +#define CIX_PAD_I2S3_DATA_OUT1_FUNC_I2S3_DATA_OUT1 (73 << 8 | 0x0) +#define CIX_PAD_I2S3_DATA_OUT1_FUNC_GPIO089 (73 << 8 | 0x1) +#define CIX_PAD_I2S3_DATA_OUT1_FUNC_I2S7_DATA_OUT1_DBG (73 << 8 | 0x2) +#define CIX_PAD_I2S3_DATA_OUT1_FUNC_I2S8_DATA_OUT1_DBG (73 << 8 | 0x3) +#define CIX_PAD_GPIO090_FUNC_GPIO090 (74 << 8 | 0x0) +#define CIX_PAD_GPIO090_FUNC_I2S4_MCLK_LB (74 << 8 | 0x1) +#define CIX_PAD_GPIO091_FUNC_GPIO091 (75 << 8 | 0x0) +#define CIX_PAD_GPIO091_FUNC_I2S4_SCK_LB (75 << 8 | 0x1) +#define CIX_PAD_GPIO092_FUNC_GPIO092 (76 << 8 | 0x0) +#define CIX_PAD_GPIO092_FUNC_I2S4_WS_LB (76 << 8 | 0x1) +#define CIX_PAD_GPIO093_FUNC_GPIO093 (77 << 8 | 0x0) +#define CIX_PAD_GPIO093_FUNC_I2S4_DATA_IN_LB (77 << 8 | 0x1) +#define CIX_PAD_GPIO094_FUNC_GPIO094 (78 << 8 | 0x0) +#define CIX_PAD_GPIO094_FUNC_I2S4_DATA_OUT_LB (78 << 8 | 0x1) +#define CIX_PAD_UART0_TXD_FUNC_UART0_TXD (79 << 8 | 0x0) +#define CIX_PAD_UART0_TXD_FUNC_PWM0 (79 << 8 | 0x1) +#define CIX_PAD_UART0_TXD_FUNC_GPIO095 (79 << 8 | 0x2) +#define CIX_PAD_UART0_RXD_FUNC_UART0_RXD (80 << 8 | 0x0) +#define CIX_PAD_UART0_RXD_FUNC_PWM1 (80 << 8 | 0x1) +#define CIX_PAD_UART0_RXD_FUNC_GPIO096 (80 << 8 | 0x2) +#define CIX_PAD_UART0_CTS_FUNC_UART0_CTS (81 << 8 | 0x0) +#define CIX_PAD_UART0_CTS_FUNC_FAN_OUT2 (81 << 8 | 0x1) +#define CIX_PAD_UART0_CTS_FUNC_GPIO097 (81 << 8 | 0x2) +#define CIX_PAD_UART0_RTS_FUNC_UART0_RTS (82 << 8 | 0x0) +#define CIX_PAD_UART0_RTS_FUNC_FAN_TACH2 (82 << 8 | 0x1) +#define CIX_PAD_UART0_RTS_FUNC_GPIO098 (82 << 8 | 0x2) +#define CIX_PAD_UART1_TXD_FUNC_UART1_TXD (83 << 8 | 0x0) +#define CIX_PAD_UART1_TXD_FUNC_FAN_OUT0 (83 << 8 | 0x1) +#define CIX_PAD_UART1_TXD_FUNC_GPIO099 (83 << 8 | 0x2) +#define CIX_PAD_UART1_RXD_FUNC_UART1_RXD (84 << 8 | 0x0) +#define CIX_PAD_UART1_RXD_FUNC_FAN_TACH0 (84 << 8 | 0x1) +#define CIX_PAD_UART1_RXD_FUNC_GPIO100 (84 << 8 | 0x2) +#define CIX_PAD_UART1_CTS_FUNC_UART1_CTS (85 << 8 | 0x0) +#define CIX_PAD_UART1_CTS_FUNC_FAN_OUT1 (85 << 8 | 0x1) +#define CIX_PAD_UART1_CTS_FUNC_GPIO101 (85 << 8 | 0x2) +#define CIX_PAD_UART1_RTS_FUNC_UART1_RTS (86 << 8 | 0x0) +#define CIX_PAD_UART1_RTS_FUNC_FAN_TACH1 (86 << 8 | 0x1) +#define CIX_PAD_UART1_RTS_FUNC_GPIO102 (86 << 8 | 0x2) +#define CIX_PAD_UART2_TXD_FUNC_UART2_TXD (87 << 8 | 0x0) +#define CIX_PAD_UART2_TXD_FUNC_GPIO103 (87 << 8 | 0x1) +#define CIX_PAD_UART2_RXD_FUNC_UART2_RXD (88 << 8 | 0x0) +#define CIX_PAD_UART2_RXD_FUNC_GPIO104 (88 << 8 | 0x1) +#define CIX_PAD_UART3_TXD_FUNC_UART3_TXD (89 << 8 | 0x0) +#define CIX_PAD_UART3_TXD_FUNC_GPIO105 (89 << 8 | 0x1) +#define CIX_PAD_UART3_RXD_FUNC_UART3_RXD (90 << 8 | 0x0) +#define CIX_PAD_UART3_RXD_FUNC_GPIO106 (90 << 8 | 0x1) +#define CIX_PAD_UART3_CTS_FUNC_UART3_CTS (91 << 8 | 0x0) +#define CIX_PAD_UART3_CTS_FUNC_GPIO107 (91 << 8 | 0x1) +#define CIX_PAD_UART3_CTS_FUNC_TRIGIN0 (91 << 8 | 0x2) +#define CIX_PAD_UART3_RTS_FUNC_UART3_RTS (92 << 8 | 0x0) +#define CIX_PAD_UART3_RTS_FUNC_GPIO108 (92 << 8 | 0x1) +#define CIX_PAD_UART3_RTS_FUNC_TRIGIN1 (92 << 8 | 0x2) +#define CIX_PAD_UART4_CSU_PM_TXD_FUNC_UART4_CSU_PM_TXD (93 << 8 | 0x0) +#define CIX_PAD_UART4_CSU_PM_TXD_FUNC_GPIO109 (93 << 8 | 0x1) +#define CIX_PAD_UART4_CSU_PM_RXD_FUNC_UART4_CSU_PM_RXD (94 << 8 | 0x0) +#define CIX_PAD_UART4_CSU_PM_RXD_FUNC_GPIO110 (94 << 8 | 0x1) +#define CIX_PAD_UART5_CSU_SE_TXD_FUNC_UART5_CSU_SE_TXD (95 << 8 | 0x0) +#define CIX_PAD_UART5_CSU_SE_TXD_FUNC_GPIO111 (95 << 8 | 0x1) +#define CIX_PAD_UART5_CSU_SE_RXD_FUNC_UART5_CSU_SE_RXD (96 << 8 | 0x0) +#define CIX_PAD_UART5_CSU_SE_RXD_FUNC_GPIO112 (96 << 8 | 0x1) +#define CIX_PAD_UART6_CSU_SE_RXD_FUNC_UART6_CSU_SE_RXD (97 << 8 | 0x0) +#define CIX_PAD_UART6_CSU_SE_RXD_FUNC_GPIO113 (97 << 8 | 0x1) +#define CIX_PAD_CLK_REQ0_L_FUNC_CLK_REQ0_L (98 << 8 | 0x0) +#define CIX_PAD_CLK_REQ0_L_FUNC_GPIO114 (98 << 8 | 0x1) +#define CIX_PAD_CLK_REQ2_L_FUNC_CLK_REQ2_L (99 << 8 | 0x0) +#define CIX_PAD_CLK_REQ2_L_FUNC_GPIO115 (99 << 8 | 0x1) +#define CIX_PAD_CLK_REQ4_L_FUNC_CLK_REQ4_L (100 << 8 | 0x0) +#define CIX_PAD_CLK_REQ4_L_FUNC_GPIO116 (100 << 8 | 0x1) +#define CIX_PAD_CSI0_MCLK0_FUNC_CSI0_MCLK0 (101 << 8 | 0x0) +#define CIX_PAD_CSI0_MCLK0_FUNC_GPIO117 (101 << 8 | 0x1) +#define CIX_PAD_CSI0_MCLK1_FUNC_CSI0_MCLK1 (102 << 8 | 0x0) +#define CIX_PAD_CSI0_MCLK1_FUNC_GPIO118 (102 << 8 | 0x1) +#define CIX_PAD_CSI1_MCLK0_FUNC_CSI1_MCLK0 (103 << 8 | 0x0) +#define CIX_PAD_CSI1_MCLK0_FUNC_GPIO119 (103 << 8 | 0x1) +#define CIX_PAD_CSI1_MCLK1_FUNC_CSI1_MCLK1 (104 << 8 | 0x0) +#define CIX_PAD_CSI1_MCLK1_FUNC_GPIO120 (104 << 8 | 0x1) +#define CIX_PAD_GPIO121_FUNC_GPIO121 (105 << 8 | 0x0) +#define CIX_PAD_GPIO121_FUNC_GMAC0_REFCLK_25M (105 << 8 | 0x1) +#define CIX_PAD_GPIO122_FUNC_GPIO122 (106 << 8 | 0x0) +#define CIX_PAD_GPIO122_FUNC_GMAC0_TX_CTL (106 << 8 | 0x1) +#define CIX_PAD_GPIO123_FUNC_GPIO123 (107 << 8 | 0x0) +#define CIX_PAD_GPIO123_FUNC_GMAC0_TXD0 (107 << 8 | 0x1) +#define CIX_PAD_GPIO124_FUNC_GPIO124 (108 << 8 | 0x0) +#define CIX_PAD_GPIO124_FUNC_GMAC0_TXD1 (108 << 8 | 0x1) +#define CIX_PAD_GPIO125_FUNC_GPIO125 (109 << 8 | 0x0) +#define CIX_PAD_GPIO125_FUNC_GMAC0_TXD2 (109 << 8 | 0x1) +#define CIX_PAD_GPIO126_FUNC_GPIO126 (110 << 8 | 0x0) +#define CIX_PAD_GPIO126_FUNC_GMAC0_TXD3 (110 << 8 | 0x1) +#define CIX_PAD_GPIO127_FUNC_GPIO127 (111 << 8 | 0x0) +#define CIX_PAD_GPIO127_FUNC_GMAC0_TX_CLK (111 << 8 | 0x1) +#define CIX_PAD_GPIO128_FUNC_GPIO128 (112 << 8 | 0x0) +#define CIX_PAD_GPIO128_FUNC_GMAC0_RX_CTL (112 << 8 | 0x1) +#define CIX_PAD_GPIO129_FUNC_GPIO129 (113 << 8 | 0x0) +#define CIX_PAD_GPIO129_FUNC_GMAC0_RXD0 (113 << 8 | 0x1) +#define CIX_PAD_GPIO130_FUNC_GPIO130 (114 << 8 | 0x0) +#define CIX_PAD_GPIO130_FUNC_GMAC0_RXD1 (114 << 8 | 0x1) +#define CIX_PAD_GPIO131_FUNC_GPIO131 (115 << 8 | 0x0) +#define CIX_PAD_GPIO131_FUNC_GMAC0_RXD2 (115 << 8 | 0x1) +#define CIX_PAD_GPIO132_FUNC_GPIO132 (116 << 8 | 0x0) +#define CIX_PAD_GPIO132_FUNC_GMAC0_RXD3 (116 << 8 | 0x1) +#define CIX_PAD_GPIO133_FUNC_GPIO133 (117 << 8 | 0x0) +#define CIX_PAD_GPIO133_FUNC_GMAC0_RX_CLK (117 << 8 | 0x1) +#define CIX_PAD_GPIO134_FUNC_GPIO134 (118 << 8 | 0x0) +#define CIX_PAD_GPIO134_FUNC_GMAC0_MDC (118 << 8 | 0x1) +#define CIX_PAD_GPIO135_FUNC_GPIO135 (119 << 8 | 0x0) +#define CIX_PAD_GPIO135_FUNC_GMAC0_MDIO (119 << 8 | 0x1) +#define CIX_PAD_GPIO136_FUNC_GPIO136 (120 << 8 | 0x0) +#define CIX_PAD_GPIO136_FUNC_GMAC1_REFCLK_25M (120 << 8 | 0x1) +#define CIX_PAD_GPIO137_FUNC_GPIO137 (121 << 8 | 0x0) +#define CIX_PAD_GPIO137_FUNC_GMAC1_TX_CTL (121 << 8 | 0x1) +#define CIX_PAD_GPIO138_FUNC_GPIO138 (122 << 8 | 0x0) +#define CIX_PAD_GPIO138_FUNC_GMAC1_TXD0 (122 << 8 | 0x1) +#define CIX_PAD_GPIO138_FUNC_SPI2_MISO (122 << 8 | 0x2) +#define CIX_PAD_GPIO139_FUNC_GPIO139 (123 << 8 | 0x0) +#define CIX_PAD_GPIO139_FUNC_GMAC1_TXD1 (123 << 8 | 0x1) +#define CIX_PAD_GPIO139_FUNC_SPI2_CS0 (123 << 8 | 0x2) +#define CIX_PAD_GPIO140_FUNC_GPIO140 (124 << 8 | 0x0) +#define CIX_PAD_GPIO140_FUNC_GMAC1_TXD2 (124 << 8 | 0x1) +#define CIX_PAD_GPIO140_FUNC_SPI2_CS1 (124 << 8 | 0x2) +#define CIX_PAD_GPIO141_FUNC_GPIO141 (125 << 8 | 0x0) +#define CIX_PAD_GPIO141_FUNC_GMAC1_TXD3 (125 << 8 | 0x1) +#define CIX_PAD_GPIO141_FUNC_SPI2_MOSI (125 << 8 | 0x2) +#define CIX_PAD_GPIO142_FUNC_GPIO142 (126 << 8 | 0x0) +#define CIX_PAD_GPIO142_FUNC_GMAC1_TX_CLK (126 << 8 | 0x1) +#define CIX_PAD_GPIO142_FUNC_SPI2_CLK (126 << 8 | 0x2) +#define CIX_PAD_GPIO143_FUNC_GPIO143 (127 << 8 | 0x0) +#define CIX_PAD_GPIO143_FUNC_GMAC1_RX_CTL (127 << 8 | 0x1) +#define CIX_PAD_GPIO144_FUNC_GPIO144 (128 << 8 | 0x0) +#define CIX_PAD_GPIO144_FUNC_GMAC1_RXD0 (128 << 8 | 0x1) +#define CIX_PAD_GPIO145_FUNC_GPIO145 (129 << 8 | 0x0) +#define CIX_PAD_GPIO145_FUNC_GMAC1_RXD1 (129 << 8 | 0x1) +#define CIX_PAD_GPIO146_FUNC_GPIO146 (130 << 8 | 0x0) +#define CIX_PAD_GPIO146_FUNC_GMAC1_RXD2 (130 << 8 | 0x1) +#define CIX_PAD_GPIO147_FUNC_GPIO147 (131 << 8 | 0x0) +#define CIX_PAD_GPIO147_FUNC_GMAC1_RXD3 (131 << 8 | 0x1) +#define CIX_PAD_GPIO148_FUNC_GPIO148 (132 << 8 | 0x0) +#define CIX_PAD_GPIO148_FUNC_GMAC1_RX_CLK (132 << 8 | 0x1) +#define CIX_PAD_GPIO149_FUNC_GPIO149 (133 << 8 | 0x0) +#define CIX_PAD_GPIO149_FUNC_GMAC1_MDC (133 << 8 | 0x1) +#define CIX_PAD_GPIO150_FUNC_GPIO150 (134 << 8 | 0x0) +#define CIX_PAD_GPIO150_FUNC_GMAC1_MDIO (134 << 8 | 0x1) +#define CIX_PAD_GPIO151_FUNC_GPIO151 (135 << 8 | 0x0) +#define CIX_PAD_GPIO151_FUNC_PM_GPIO0 (135 << 8 | 0x1) +#define CIX_PAD_GPIO152_FUNC_GPIO152 (136 << 8 | 0x0) +#define CIX_PAD_GPIO152_FUNC_PM_GPIO1 (136 << 8 | 0x1) +#define CIX_PAD_GPIO153_FUNC_GPIO153 (137 << 8 | 0x0) +#define CIX_PAD_GPIO153_FUNC_PM_GPIO2 (137 << 8 | 0x1) + +#endif arch/arm64/boot/dts/cix/sky1.dtsi +10
-0@@ -328,6 +328,11 @@ i3c1: i3c@4100000 { status = "disabled"; }; + iomuxc: pinctrl@4170000 { + compatible = "cix,sky1-pinctrl"; + reg = <0x0 0x04170000 0x0 0x1000>; + }; + mbox_ap2se: mailbox@5060000 { compatible = "cix,sky1-mbox"; reg = <0x0 0x05060000 0x0 0x10000>;@@ -416,6 +421,11 @@ ppi_partition1: interrupt-partition-1 { }; }; }; + + iomuxc_s5: pinctrl@16007000 { + compatible = "cix,sky1-pinctrl-s5"; + reg = <0x0 0x16007000 0x0 0x1000>; + }; }; timer {Signature · 1 line
2.49.0
Signature · 2 lines
Best regards, Peter
Hi Gary,
Quoted 3 lines · Gary Yang
Gary Yang (3):
dt-bindings: pinctrl: Add cix,sky1-pinctrl
pinctrl: cix: Add pin-controller support for sky1
Patches 1 & 2 applied to the pin control tree for v6.19!
Quoted 1 line
arm64: dts: cix: Add pinctrl nodes for sky1
This third patch should be applied to the SoC tree, Peter Chen or Fugang Duan takes care of that I think? Not sure.
Good work with the pin controller, now is a good time to just go on from here and fix the GPIO controllers using the pin controller as back-end too :)
Yours,
Linus Walleij
Quoted 10 lines · Linus Walleij
EXTERNAL EMAIL
Hi Gary,
Quoted 3 lines · Gary Yang
Gary Yang (3):
dt-bindings: pinctrl: Add cix,sky1-pinctrl
pinctrl: cix: Add pin-controller support for sky1
Quoted 6 lines
Patches 1 & 2 applied to the pin control tree for v6.19!
Quoted 1 line
arm64: dts: cix: Add pinctrl nodes for sky1
This third patch should be applied to the SoC tree, Peter Chen or Fugang Duan takes care of that I think? Not sure.
Thanks, Linus.
Yes, since you have applied driver and dt-binding patches, I will apply Dts patch to CIX SoC Tree.
Signature · 2 lines
Best regards, Peter