Skip to contentSkip to conversation

Fix crazy CPU accounting usage for SQPOLL

PATCH New Jens Axboe 1 participant 3 messages Oct 22, 2025

Subsystems (2)
lore
Share & tools
lore

Jens Axboe

author maintainer
#0 lore raw

v2 cover Fix crazy CPU accounting usage for SQPOLL

Hi,

Fengnan Chang reports [1] excessive CPU usage from the SQPOLL work vs total time accounting, and that indeed does look like a problem. The issue seems to be just eager time querying, and using essentially the wrong interface. Patch 1 gets rid of getrusage() for this, and patch 2 attempts to be a bit smarter in how often the time needs to get queried. Profile results in patch 2 as well.

Since v1:
- Store time in usec rather than convert between nsec and timespec64.

 io_uring/fdinfo.c |  8 +++----
 io_uring/sqpoll.c | 65 ++++++++++++++++++++++++++++++++++++++-----------------
 io_uring/sqpoll.h |  1 +
 3 files changed, 50 insertions(+), 24 deletions(-)
Signature · 1 line
Jens Axboe
author maintainer
#1 lore raw

PATCH v2 1/2 io_uring/sqpoll: switch away from getrusage() for CPU accounting

getrusage() does a lot more than what the SQPOLL accounting needs, the latter only cares about (and uses) the stime. Rather than do a full RUSAGE_SELF summation, just query the used stime instead.

Fixes 3fcb9d17206e ("io_uring/sqpoll: statistics of the true utilization of sq threads")
---
 io_uring/fdinfo.c |  8 ++++----
 io_uring/sqpoll.c | 32 ++++++++++++++++++--------------
 io_uring/sqpoll.h |  1 +
 3 files changed, 23 insertions(+), 18 deletions(-)
io_uring/fdinfo.c +4 -4
index ff3364531c77..294c75a8a3bd 100644
@@ -59,7 +59,6 @@ static void __io_uring_show_fdinfo(struct io_ring_ctx *ctx, struct seq_file *m)
 {
 	struct io_overflow_cqe *ocqe;
 	struct io_rings *r = ctx->rings;
-	struct rusage sq_usage;
 	unsigned int sq_mask = ctx->sq_entries - 1, cq_mask = ctx->cq_entries - 1;
 	unsigned int sq_head = READ_ONCE(r->sq.head);
 	unsigned int sq_tail = READ_ONCE(r->sq.tail);
@@ -152,14 +151,15 @@ static void __io_uring_show_fdinfo(struct io_ring_ctx *ctx, struct seq_file *m)
 		 * thread termination.
 		 */
 		if (tsk) {
+			u64 usec;
+
 			get_task_struct(tsk);
 			rcu_read_unlock();
-			getrusage(tsk, RUSAGE_SELF, &sq_usage);
+			usec = io_sq_cpu_usec(tsk);
 			put_task_struct(tsk);
 			sq_pid = sq->task_pid;
 			sq_cpu = sq->sq_cpu;
-			sq_total_time = (sq_usage.ru_stime.tv_sec * 1000000
-					 + sq_usage.ru_stime.tv_usec);
+			sq_total_time = usec;
 			sq_work_time = sq->work_time;
 		} else {
 			rcu_read_unlock();
io_uring/sqpoll.c +18 -14
index a3f11349ce06..2b816fdb9866 100644
@@ -11,6 +11,7 @@
 #include <linux/audit.h>
 #include <linux/security.h>
 #include <linux/cpuset.h>
+#include <linux/sched/cputime.h>
 #include <linux/io_uring.h>
 
 #include <uapi/linux/io_uring.h>
@@ -169,6 +170,20 @@ static inline bool io_sqd_events_pending(struct io_sq_data *sqd)
 	return READ_ONCE(sqd->state);
 }
 
+u64 io_sq_cpu_usec(struct task_struct *tsk)
+{
+	u64 utime, stime;
+
+	task_cputime_adjusted(tsk, &utime, &stime);
+	do_div(stime, 1000);
+	return stime;
+}
+
+static void io_sq_update_worktime(struct io_sq_data *sqd, u64 usec)
+{
+	sqd->work_time += io_sq_cpu_usec(current) - usec;
+}
+
 static int __io_sq_thread(struct io_ring_ctx *ctx, bool cap_entries)
 {
 	unsigned int to_submit;
@@ -255,26 +270,15 @@ static bool io_sq_tw_pending(struct llist_node *retry_list)
 	return retry_list || !llist_empty(&tctx->task_list);
 }
 
-static void io_sq_update_worktime(struct io_sq_data *sqd, struct rusage *start)
-{
-	struct rusage end;
-
-	getrusage(current, RUSAGE_SELF, &end);
-	end.ru_stime.tv_sec -= start->ru_stime.tv_sec;
-	end.ru_stime.tv_usec -= start->ru_stime.tv_usec;
-
-	sqd->work_time += end.ru_stime.tv_usec + end.ru_stime.tv_sec * 1000000;
-}
-
 static int io_sq_thread(void *data)
 {
 	struct llist_node *retry_list = NULL;
 	struct io_sq_data *sqd = data;
 	struct io_ring_ctx *ctx;
-	struct rusage start;
 	unsigned long timeout = 0;
 	char buf[TASK_COMM_LEN] = {};
 	DEFINE_WAIT(wait);
+	u64 start;
 
 	/* offload context creation failed, just exit */
 	if (!current->io_uring) {
@@ -317,7 +321,7 @@ static int io_sq_thread(void *data)
 		}
 
 		cap_entries = !list_is_singular(&sqd->ctx_list);
-		getrusage(current, RUSAGE_SELF, &start);
+		start = io_sq_cpu_usec(current);
 		list_for_each_entry(ctx, &sqd->ctx_list, sqd_list) {
 			int ret = __io_sq_thread(ctx, cap_entries);
 
@@ -333,7 +337,7 @@ static int io_sq_thread(void *data)
 
 		if (sqt_spin || !time_after(jiffies, timeout)) {
 			if (sqt_spin) {
-				io_sq_update_worktime(sqd, &start);
+				io_sq_update_worktime(sqd, start);
 				timeout = jiffies + sqd->sq_thread_idle;
 			}
 			if (unlikely(need_resched())) {
io_uring/sqpoll.h +1 -0
index b83dcdec9765..fd2f6f29b516 100644
@@ -29,6 +29,7 @@ void io_sq_thread_unpark(struct io_sq_data *sqd);
 void io_put_sq_data(struct io_sq_data *sqd);
 void io_sqpoll_wait_sq(struct io_ring_ctx *ctx);
 int io_sqpoll_wq_cpu_affinity(struct io_ring_ctx *ctx, cpumask_var_t mask);
+u64 io_sq_cpu_usec(struct task_struct *tsk);
 
 static inline struct task_struct *sqpoll_task_locked(struct io_sq_data *sqd)
 {
Signature · 1 line
2.51.0
author maintainer
#2 lore raw

PATCH v2 2/2 io_uring/sqpoll: be smarter on when to update the stime usage

In reply to Jens Axboe

The current approach is a bit naive, and hence calls the time querying way too often. Only start the "doing work" timer when there's actual work to do, and then use that information to terminate (and account) the work time once done. This greatly reduces the frequency of these calls, when they cannot have changed anyway.

Running a basic random reader that is setup to use SQPOLL, a profile before this change shows these as the top cycle consumers:

+   32.60%  iou-sqp-1074  [kernel.kallsyms]  [k] thread_group_cputime_adjusted
+   19.97%  iou-sqp-1074  [kernel.kallsyms]  [k] thread_group_cputime
+   12.20%  io_uring      io_uring           [.] submitter_uring_fn
+    4.13%  iou-sqp-1074  [kernel.kallsyms]  [k] getrusage
+    2.45%  iou-sqp-1074  [kernel.kallsyms]  [k] io_submit_sqes
+    2.18%  iou-sqp-1074  [kernel.kallsyms]  [k] __pi_memset_generic
+    2.09%  iou-sqp-1074  [kernel.kallsyms]  [k] cputime_adjust

and after this change, top of profile looks as follows:

+   36.23%  io_uring     io_uring           [.] submitter_uring_fn
+   23.26%  iou-sqp-819  [kernel.kallsyms]  [k] io_sq_thread
+   10.14%  iou-sqp-819  [kernel.kallsyms]  [k] io_sq_tw
+    6.52%  iou-sqp-819  [kernel.kallsyms]  [k] tctx_task_work_run
+    4.82%  iou-sqp-819  [kernel.kallsyms]  [k] nvme_submit_cmds.part.0
+    2.91%  iou-sqp-819  [kernel.kallsyms]  [k] io_submit_sqes
[...]
     0.02%  iou-sqp-819  [kernel.kallsyms]  [k] cputime_adjust

where it's spending the cycles on things that actually matter.

Fixes 3fcb9d17206e ("io_uring/sqpoll: statistics of the true utilization of sq threads")
---
 io_uring/sqpoll.c | 43 ++++++++++++++++++++++++++++++++-----------
 1 file changed, 32 insertions(+), 11 deletions(-)
io_uring/sqpoll.c +32 -11
index 2b816fdb9866..e22f072c7d5f 100644
@@ -170,6 +170,11 @@ static inline bool io_sqd_events_pending(struct io_sq_data *sqd)
 	return READ_ONCE(sqd->state);
 }
 
+struct io_sq_time {
+	bool started;
+	u64 usec;
+};
+
 u64 io_sq_cpu_usec(struct task_struct *tsk)
 {
 	u64 utime, stime;
@@ -179,12 +184,24 @@ u64 io_sq_cpu_usec(struct task_struct *tsk)
 	return stime;
 }
 
-static void io_sq_update_worktime(struct io_sq_data *sqd, u64 usec)
+static void io_sq_update_worktime(struct io_sq_data *sqd, struct io_sq_time *ist)
+{
+	if (!ist->started)
+		return;
+	ist->started = false;
+	sqd->work_time += io_sq_cpu_usec(current) - ist->usec;
+}
+
+static void io_sq_start_worktime(struct io_sq_time *ist)
 {
-	sqd->work_time += io_sq_cpu_usec(current) - usec;
+	if (ist->started)
+		return;
+	ist->started = true;
+	ist->usec = io_sq_cpu_usec(current);
 }
 
-static int __io_sq_thread(struct io_ring_ctx *ctx, bool cap_entries)
+static int __io_sq_thread(struct io_ring_ctx *ctx, struct io_sq_data *sqd,
+			  bool cap_entries, struct io_sq_time *ist)
 {
 	unsigned int to_submit;
 	int ret = 0;
@@ -197,6 +214,8 @@ static int __io_sq_thread(struct io_ring_ctx *ctx, bool cap_entries)
 	if (to_submit || !wq_list_empty(&ctx->iopoll_list)) {
 		const struct cred *creds = NULL;
 
+		io_sq_start_worktime(ist);
+
 		if (ctx->sq_creds != current_cred())
 			creds = override_creds(ctx->sq_creds);
 
@@ -278,7 +297,6 @@ static int io_sq_thread(void *data)
 	unsigned long timeout = 0;
 	char buf[TASK_COMM_LEN] = {};
 	DEFINE_WAIT(wait);
-	u64 start;
 
 	/* offload context creation failed, just exit */
 	if (!current->io_uring) {
@@ -313,6 +331,7 @@ static int io_sq_thread(void *data)
 	mutex_lock(&sqd->lock);
 	while (1) {
 		bool cap_entries, sqt_spin = false;
+		struct io_sq_time ist = { };
 
 		if (io_sqd_events_pending(sqd) || signal_pending(current)) {
 			if (io_sqd_handle_event(sqd))
@@ -321,9 +340,8 @@ static int io_sq_thread(void *data)
 		}
 
 		cap_entries = !list_is_singular(&sqd->ctx_list);
-		start = io_sq_cpu_usec(current);
 		list_for_each_entry(ctx, &sqd->ctx_list, sqd_list) {
-			int ret = __io_sq_thread(ctx, cap_entries);
+			int ret = __io_sq_thread(ctx, sqd, cap_entries, &ist);
 
 			if (!sqt_spin && (ret > 0 || !wq_list_empty(&ctx->iopoll_list)))
 				sqt_spin = true;
@@ -331,15 +349,18 @@ static int io_sq_thread(void *data)
 		if (io_sq_tw(&retry_list, IORING_TW_CAP_ENTRIES_VALUE))
 			sqt_spin = true;
 
-		list_for_each_entry(ctx, &sqd->ctx_list, sqd_list)
-			if (io_napi(ctx))
+		list_for_each_entry(ctx, &sqd->ctx_list, sqd_list) {
+			if (io_napi(ctx)) {
+				io_sq_start_worktime(&ist);
 				io_napi_sqpoll_busy_poll(ctx);
+			}
+		}
+
+		io_sq_update_worktime(sqd, &ist);
 
 		if (sqt_spin || !time_after(jiffies, timeout)) {
-			if (sqt_spin) {
-				io_sq_update_worktime(sqd, start);
+			if (sqt_spin)
 				timeout = jiffies + sqd->sq_thread_idle;
-			}
 			if (unlikely(need_resched())) {
 				mutex_unlock(&sqd->lock);
 				cond_resched();
Signature · 1 line
2.51.0