tools: sunxi-spl-image-builder: support H6/H616 NAND boot
PATCH v3 1/1 tools: sunxi-spl-image-builder: support H6/H616 NAND boot
The H6/H616 boot ROM doesn't expect a SPL scrambled the same way as older SoCs.
It doesn't use a specific seeds table, it expects a maximized ECC (BCH-80), a specific BBM (FF000301) and doesn't work if empty pages are skipped (it needs its specific BBM, even in the padding).
So, add a --soc=h6 option to support H6/616 with:
- more ECC strengths
- specific BBM
- default_scrambler_seeds[] with all values
- no empty pages skip
In Kconfig, select BCH-80 by default for SUNXI_SPL_ECC_STRENGTH to make BROM happy.
And in scripts/Makefile.xpl, use --soc=h6 option when building for a SUN50I_GEN_H6 SoC.
Tested on Whatsminer H616 board, booting from NAND.
--- drivers/mtd/nand/raw/Kconfig | 1 + scripts/Makefile.xpl | 1 + tools/sunxi-spl-image-builder.c | 92 ++++++++++++++++++++++++++------- 3 files changed, 75 insertions(+), 19 deletions(-)
Changes from v2:
- add a --soc=h6 option as suggested by Michael
Changes from v1:
- move up "default 80 if SUN50I_GEN_H6" (sorry for the noise)
drivers/mtd/nand/raw/Kconfig +1 -0
@@ -475,6 +475,7 @@ if NAND_SUNXI config NAND_SUNXI_SPL_ECC_STRENGTH int "Allwinner NAND SPL ECC Strength" + default 80 if SUN50I_GEN_H6 default 64 config NAND_SUNXI_SPL_ECC_SIZE
scripts/Makefile.xpl +1 -0
@@ -454,6 +454,7 @@ $(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin FORCE quiet_cmd_sunxi_spl_image_builder = SUNXI_SPL_IMAGE_BUILDER $@ cmd_sunxi_spl_image_builder = $(objtree)/tools/sunxi-spl-image-builder \ + $(if $(CONFIG_SUN50I_GEN_H6),--soc=h6) \ -c $(CONFIG_NAND_SUNXI_SPL_ECC_STRENGTH)/$(CONFIG_NAND_SUNXI_SPL_ECC_SIZE) \ -p $(CONFIG_SYS_NAND_PAGE_SIZE) \ -o $(CONFIG_SYS_NAND_OOBSIZE) \
tools/sunxi-spl-image-builder.c +73 -19
170 lines not on this page · raw message
base-commit: e50b1e8715011def8aff1588081a2649a2c6cd47
Signature · 1 line
2.47.3
Hi Richard,
Quoted 18 lines · Richard Genoud
The H6/H616 boot ROM doesn't expect a SPL scrambled the same way as older SoCs.
It doesn't use a specific seeds table, it expects a maximized ECC (BCH-80), a specific BBM (FF000301) and doesn't work if empty pages are skipped (it needs its specific BBM, even in the padding).So, add a --soc=h6 option to support H6/616 with:
- more ECC strengths
- specific BBM
- default_scrambler_seeds[] with all values
- no empty pages skipIn
Kconfig, select BCH-80 by default forSUNXI_SPL_ECC_STRENGTHto make BROM happy.And in
scripts/Makefile.xpl, use --soc=h6 option when building for aSUN50I_GEN_H6SoC.
Quoted 6 lines
Tested on Whatsminer H616 board, booting from NAND.
Co-developed-by James Hilliard <[email protected]>Signed-off-by James Hilliard <[email protected]>Signed-off-by Richard Genoud <[email protected]>---
Thanks,
Miquèl
Hi Michael,
Le 28/10/2025 à 10:40, Miquel Raynal a écrit :
Quoted 29 lines
Hi Richard,
Quoted 18 lines · Richard Genoud
The H6/H616 boot ROM doesn't expect a SPL scrambled the same way as older SoCs.
It doesn't use a specific seeds table, it expects a maximized ECC (BCH-80), a specific BBM (FF000301) and doesn't work if empty pages are skipped (it needs its specific BBM, even in the padding).So, add a --soc=h6 option to support H6/616 with:
- more ECC strengths
- specific BBM
- default_scrambler_seeds[] with all values
- no empty pages skipIn
Kconfig, select BCH-80 by default forSUNXI_SPL_ECC_STRENGTHto make BROM happy.And in
scripts/Makefile.xpl, use --soc=h6 option when building for aSUN50I_GEN_H6SoC.Quoted 6 lines
Tested on Whatsminer H616 board, booting from NAND.
Co-developed-by James Hilliard <[email protected]>Signed-off-by James Hilliard <[email protected]>Signed-off-by Richard Genoud <[email protected]>---
Quoted 4 lines
Reviewed-by Miquel Raynal <[email protected]>Thanks,
Miquèl
Sorry, I didn't remembered until now, but it seems this patch also got forgotten.
Regards,
Richard
Hi
I will drop my request now, and prepare a new one and including this one
Michael
Quoted 43 lines · Richard GENOUD
Hi Michael,
Quoted 29 lines · Miquel Raynal
Hi Richard,
Quoted 18 lines · Richard Genoud
The H6/H616 boot ROM doesn't expect a SPL scrambled the same way as older SoCs.
It doesn't use a specific seeds table, it expects a maximized ECC (BCH-80), a specific BBM (FF000301) and doesn't work if empty pages are skipped (it needs its specific BBM, even in the padding).So, add a --soc=h6 option to support H6/616 with:
- more ECC strengths
- specific BBM
- default_scrambler_seeds[] with all values
- no empty pages skipIn
Kconfig, select BCH-80 by default forSUNXI_SPL_ECC_STRENGTHto make BROM happy.And in
scripts/Makefile.xpl, use --soc=h6 option when building for aSUN50I_GEN_H6SoC.Quoted 6 lines
Tested on Whatsminer H616 board, booting from NAND.
Co-developed-by James Hilliard <[email protected]>Signed-off-by James Hilliard <[email protected]>Signed-off-by Richard Genoud <[email protected]>---
Quoted 4 lines
Reviewed-by Miquel Raynal <[email protected]>Thanks,
MiquèlSorry, I didn't remembered until now, but it seems this patch also got forgotten.
Regards,
Richard
Signature · 11 lines
Michael Nazzareno Trimarchi Co-Founder & Chief Executive Officer M. +39 347 913 2170 [email protected] __________________________________ Amarula Solutions BV Joop Geesinkweg 125, 1114 AB, Amsterdam, NL T. +31 (0)85 111 9172 [email protected] www.amarulasolutions.com