Skip to contentSkip to conversation

Make ELOG and GHES log and trace consistently

PATCH Superseded Fabio M. De Francesco 5 participants 18 messages Nov 4, 2025 – Nov 21, 2025

Subsystems (5)

v7 of 9 Superseded Latest is v9 →

lore
Share & tools
lore
#0 lore raw

v7 cover Make ELOG and GHES log and trace consistently

When Firmware First is enabled, BIOS handles errors first and then it makes them available to the kernel via the Common Platform Error Record (CPER) sections (UEFI 2.10 Appendix N). Linux parses the CPER sections via one of two similar paths, either ELOG or GHES.

Currently, ELOG and GHES show some inconsistencies in how they print to the kernel log as well as in how they report to userspace via trace events.

Make the two mentioned paths act similarly for what relates to logging and tracing.

--- Changes for v7 ---

- Reference UEFI v2.11 (Sathyanarayanan)
- Substitute !(A || B) with !(A && B) in an 'if' statement to convey the intended logic (Jonathan)
- Make ACPI_APEI_GHES explicitly select PCIAER because the needed ACPI_APEI_PCIEAER doesn't recursively select that prerequisite (Jonathan)

- Don't add the unnecessary cxl_cper_ras_handle_prot_err() wrapper for cxl_cper_handle_prot_err() (Jonathan)
- Make ACPI_EXTLOG explicitly select PCIAER && ACPI_APEI because the needed ACPI_APEI_PCIEAER doesn't recursively select the prerequisites
- Make ACPI_EXTLOG select CXL_BUS

--- Changes for v6 ---

- Rename the helper that copies the CPER CXL protocol error information to work struct (Dave)
- Return -EOPNOTSUPP (instead of -EINVAL) from the two helpers if ACPI_APEI_PCIEAER is not defined (Dave)

--- Changes for v5 ---

- Add 3/6 to select ACPI_APEI_PCIEAER for GHES
- Add 4,5/6 to move common code between ELOG and GHES out to new helpers use them in 6/6 (Jonathan).

--- Changes for v4 ---

- Re-base on top of recent changes of the AER error logging and drop obsoleted 2/4 (Sathyanarayanan)
- Log with pr_warn_ratelimited() (Dave)
- Collect tags

--- Changes for v3 ---

1/4, 2/4:
- collect tags; no functional changes
3/4:
- Invert logic of checks (Yazen)
- Select CONFIG_ACPI_APEI_PCIEAER (Yazen)
4/4:
- Check serial number only for CXL devices (Yazen)
- Replace "invalid" with "unknown" in the output of a pr_err() (Yazen)

--- Changes for v2 ---

- Add a patch to pass log levels to pci_print_aer() (Dan)
- Add a patch to trace CPER CXL Protocol Errors
- Rework commit messages (Dan)
- Use log_non_standard_event() (Bjorn)

--- Changes for v1 ---

- Drop the RFC prefix and restart from PATCH v1
- Drop patch 3/3 because a discussion on it has not yet been settled
- Drop namespacing in export of pci_print_aer while() (Dan)
- Don't use '#ifdef' in *.c files (Dan)
- Drop a reference on pdev after operation is complete (Dan)
- Don't log an error message if pdev is NULL (Dan)

Fabio M. De Francesco (6):
ACPI: extlog: Trace CPER Non-standard Section Body
ACPI: extlog: Trace CPER PCI Express Error Section acpi/ghes: Make GHES select ACPI_APEI_PCIEAER
acpi/ghes: Add helper for CPER CXL protocol errors validity checks acpi/ghes: Add helper to copy CPER CXL protocol error information to
work struct
ACPI: extlog: Trace CPER CXL Protocol Error Section

 drivers/acpi/Kconfig       |  7 ++++-
 drivers/acpi/acpi_extlog.c | 60 ++++++++++++++++++++++++++++++++++++
 drivers/acpi/apei/Kconfig  |  2 ++
 drivers/acpi/apei/ghes.c   | 62 +++++++++++++++++++++++++-------------
 drivers/cxl/core/ras.c     |  3 +-
 drivers/pci/pcie/aer.c     |  2 +-
 include/cxl/event.h        | 22 ++++++++++++++
 7 files changed, 134 insertions(+), 24 deletions(-)

base-commit: c9cfc122f03711a5124b4aafab3211cf4d35a2ac

Signature · 1 line
2.51.1
#1 lore raw

PATCH v7 1/6 ACPI: extlog: Trace CPER Non-standard Section Body

ghes_do_proc() has a catch-all for unknown or unhandled CPER formats (UEFI v2.11 Appendix N 2.3), extlog_print() does not. This gap was noticed by a RAS test that injected CXL protocol errors which were notified to extlog_print() via the IOMCA (I/O Machine Check Architecture) mechanism. Bring parity to the extlog_print() path by including a similar log_non_standard_event().

---
 drivers/acpi/acpi_extlog.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/acpi/acpi_extlog.c +6 -0
index f6b9562779de..47d11cb5c912 100644
@@ -183,6 +183,12 @@ static int extlog_print(struct notifier_block *nb, unsigned long val,
 			if (gdata->error_data_length >= sizeof(*mem))
 				trace_extlog_mem_event(mem, err_seq, fru_id, fru_text,
 						       (u8)gdata->error_severity);
+		} else {
+			void *err = acpi_hest_get_payload(gdata);
+
+			log_non_standard_event(sec_type, fru_id, fru_text,
+					       gdata->error_severity, err,
+					       gdata->error_data_length);
 		}
 	}
 
Signature · 1 line
2.51.1
#2 lore raw

PATCH v7 2/6 ACPI: extlog: Trace CPER PCI Express Error Section

In reply to Fabio M. De Francesco

I/O Machine Check Architecture events may signal failing PCIe components or links. The AER event contains details on what was happening on the wire when the error was signaled.

Trace the CPER PCIe Error section (UEFI v2.11, Appendix N.2.7) reported by the I/O MCA.

---
 drivers/acpi/Kconfig       |  6 +++++-
 drivers/acpi/acpi_extlog.c | 32 ++++++++++++++++++++++++++++++++
 drivers/pci/pcie/aer.c     |  2 +-
 3 files changed, 38 insertions(+), 2 deletions(-)
drivers/acpi/Kconfig +5 -1
index ca00a5dbcf75..be02634f2320 100644
@@ -492,7 +492,11 @@ config ACPI_WATCHDOG
 
 config ACPI_EXTLOG
 	tristate "Extended Error Log support"
-	depends on X86_MCE && X86_LOCAL_APIC && EDAC
+	depends on X86_MCE && X86_LOCAL_APIC
+	select EDAC
+	select PCIEAER
+	select ACPI_APEI
+	select ACPI_APEI_PCIEAER
 	select UEFI_CPER
 	help
 	  Certain usages such as Predictive Failure Analysis (PFA) require
drivers/acpi/acpi_extlog.c +32 -0
index 47d11cb5c912..b3976ceb4ee4 100644
@@ -132,6 +132,34 @@ static int print_extlog_rcd(const char *pfx,
 	return 1;
 }
 
+static void extlog_print_pcie(struct cper_sec_pcie *pcie_err,
+			      int severity)
+{
+	struct aer_capability_regs *aer;
+	struct pci_dev *pdev;
+	unsigned int devfn;
+	unsigned int bus;
+	int aer_severity;
+	int domain;
+
+	if (!(pcie_err->validation_bits & CPER_PCIE_VALID_DEVICE_ID &&
+	      pcie_err->validation_bits & CPER_PCIE_VALID_AER_INFO))
+		return;
+
+	aer_severity = cper_severity_to_aer(severity);
+	aer = (struct aer_capability_regs *)pcie_err->aer_info;
+	domain = pcie_err->device_id.segment;
+	bus = pcie_err->device_id.bus;
+	devfn = PCI_DEVFN(pcie_err->device_id.device,
+			  pcie_err->device_id.function);
+	pdev = pci_get_domain_bus_and_slot(domain, bus, devfn);
+	if (!pdev)
+		return;
+
+	pci_print_aer(pdev, aer_severity, aer);
+	pci_dev_put(pdev);
+}
+
 static int extlog_print(struct notifier_block *nb, unsigned long val,
 			void *data)
 {
@@ -183,6 +211,10 @@ static int extlog_print(struct notifier_block *nb, unsigned long val,
 			if (gdata->error_data_length >= sizeof(*mem))
 				trace_extlog_mem_event(mem, err_seq, fru_id, fru_text,
 						       (u8)gdata->error_severity);
+		} else if (guid_equal(sec_type, &CPER_SEC_PCIE)) {
+			struct cper_sec_pcie *pcie_err = acpi_hest_get_payload(gdata);
+
+			extlog_print_pcie(pcie_err, gdata->error_severity);
 		} else {
 			void *err = acpi_hest_get_payload(gdata);
 
drivers/pci/pcie/aer.c +1 -1
index 0b5ed4722ac3..1b903e0644d6 100644
@@ -971,7 +971,7 @@ void pci_print_aer(struct pci_dev *dev, int aer_severity,
 		pcie_print_tlp_log(dev, &aer->header_log, info.level,
 				   dev_fmt("  "));
 }
-EXPORT_SYMBOL_NS_GPL(pci_print_aer, "CXL");
+EXPORT_SYMBOL_GPL(pci_print_aer);
 
 /**
  * add_error_device - list device to be handled
Signature · 1 line
2.51.1
#3 lore raw

Re: [PATCH 2/6 v7] ACPI: extlog: Trace CPER PCI Express Error Section

kernel test robot noticed the following build errors:

Hi Fabio,

kernel test robot noticed the following build errors:

[auto build test ERROR on c9cfc122f03711a5124b4aafab3211cf4d35a2ac]

url:    https://github.com/intel-lab-lkp/linux/commits/Fabio-M-De-Francesco/ACPI-extlog-Trace-CPER-Non-standard-Section-Body/20251105-022733
base:   c9cfc122f03711a5124b4aafab3211cf4d35a2ac
patch link:    https://lore.kernel.org/r/20251104182446.863422-3-fabio.m.de.francesco%40linux.intel.com
patch subject: [PATCH 2/6 v7] ACPI: extlog: Trace CPER PCI Express Error Section
config: i386-buildonly-randconfig-004-20251105 (https://download.01.org/0day-ci/archive/20251105/[email protected]/config)
compiler: gcc-14 (Debian 14.2.0-19) 14.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20251105/[email protected]/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All error/warnings (new ones prefixed by >>):

>> drivers/pci/pci-driver.c:1591:6: warning: no previous prototype for 'pci_uevent_ers' [-Wmissing-prototypes]

1591 | void pci_uevent_ers(struct pci_dev *pdev, enum pci_ers_result err_type)
| ^~~~~~~~~~~~~~
--
drivers/pci/pcie/aer.c: In function 'aer_root_reset':

>> drivers/pci/pcie/aer.c:1754:27: error: 'struct pci_dev' has no member named 'rcec'
    1754 |                 root = dev->rcec;
         |                           ^~
--
   drivers/pci/pcie/err.c: In function 'report_error_detected':
>> drivers/pci/pcie/err.c:83:9: error: implicit declaration of function 'pci_uevent_ers'; did you mean 'pci_select_bars'? [-Wimplicit-function-declaration]
      83 |         pci_uevent_ers(dev, vote);
         |         ^~~~~~~~~~~~~~
         |         pci_select_bars

Kconfig warnings: (for reference only)
WARNING: unmet direct dependencies detected for PCIEAER
Depends on [n]: PCI [=y] && PCIEPORTBUS [=n]
Selected by [y]:
- ACPI_EXTLOG [=y] && ACPI [=y] && X86_MCE [=y] && X86_LOCAL_APIC [=y]
WARNING: unmet direct dependencies detected for OF_GPIO
Depends on [n]: GPIOLIB [=y] && OF [=n] && HAS_IOMEM [=y]
Selected by [y]:
- GPIO_TB10X [=y] && GPIOLIB [=y] && HAS_IOMEM [=y] && (ARC_PLAT_TB10X || COMPILE_TEST [=y])
WARNING: unmet direct dependencies detected for MFD_STMFX
Depends on [n]: HAS_IOMEM [=y] && I2C [=y] && OF [=n]
Selected by [y]:
- PINCTRL_STMFX [=y] && PINCTRL [=y] && I2C [=y] && OF_GPIO [=y] && HAS_IOMEM [=y]
WARNING: unmet direct dependencies detected for GPIO_SYSCON
Depends on [n]: GPIOLIB [=y] && HAS_IOMEM [=y] && MFD_SYSCON [=y] && OF [=n]
Selected by [y]:
- GPIO_SAMA5D2_PIOBU [=y] && GPIOLIB [=y] && HAS_IOMEM [=y] && MFD_SYSCON [=y] && OF_GPIO [=y] && (ARCH_AT91 || COMPILE_TEST [=y])
WARNING: unmet direct dependencies detected for I2C_K1
Depends on [n]: I2C [=y] && HAS_IOMEM [=y] && (ARCH_SPACEMIT || COMPILE_TEST [=y]) && OF [=n]
Selected by [y]:
- MFD_SPACEMIT_P1 [=y] && HAS_IOMEM [=y] && (ARCH_SPACEMIT || COMPILE_TEST [=y]) && I2C [=y]

vim +1754 drivers/pci/pcie/aer.c

5afc2f763edc5d drivers/pci/pcie/aer.c        Kai-Heng Feng  2024-04-16  1732  
6c2b374d74857e drivers/pci/pcie/aer/aerdrv.c Zhang, Yanmin  2006-07-31  1733  /**
5790862255028c drivers/pci/pcie/aer.c        Qiuxu Zhuo     2020-11-20  1734   * aer_root_reset - reset Root Port hierarchy, RCEC, or RCiEP
5790862255028c drivers/pci/pcie/aer.c        Qiuxu Zhuo     2020-11-20  1735   * @dev: pointer to Root Port, RCEC, or RCiEP
6c2b374d74857e drivers/pci/pcie/aer/aerdrv.c Zhang, Yanmin  2006-07-31  1736   *
a175102b0a82fc drivers/pci/pcie/aer.c        Sean V Kelley  2020-12-02  1737   * Invoked by Port Bus driver when performing reset.
f6d37800612830 drivers/pci/pcie/aer/aerdrv.c Hidetoshi Seto 2010-04-15  1738   */
6c2b374d74857e drivers/pci/pcie/aer/aerdrv.c Zhang, Yanmin  2006-07-31  1739  static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
6c2b374d74857e drivers/pci/pcie/aer/aerdrv.c Zhang, Yanmin  2006-07-31  1740  {
a175102b0a82fc drivers/pci/pcie/aer.c        Sean V Kelley  2020-12-02  1741  	int type = pci_pcie_type(dev);
a175102b0a82fc drivers/pci/pcie/aer.c        Sean V Kelley  2020-12-02  1742  	struct pci_dev *root;
a175102b0a82fc drivers/pci/pcie/aer.c        Sean V Kelley  2020-12-02  1743  	int aer;
a175102b0a82fc drivers/pci/pcie/aer.c        Sean V Kelley  2020-12-02  1744  	struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
c6d34eddecb34f drivers/pci/pcie/aer/aerdrv.c Hidetoshi Seto 2010-04-15  1745  	u32 reg32;
1842623850d09b drivers/pci/pcie/aer.c        Sinan Kaya     2018-07-19  1746  	int rc;
6c2b374d74857e drivers/pci/pcie/aer/aerdrv.c Zhang, Yanmin  2006-07-31  1747  
5790862255028c drivers/pci/pcie/aer.c        Qiuxu Zhuo     2020-11-20  1748  	/*
5790862255028c drivers/pci/pcie/aer.c        Qiuxu Zhuo     2020-11-20  1749  	 * Only Root Ports and RCECs have AER Root Command and Root Status
5790862255028c drivers/pci/pcie/aer.c        Qiuxu Zhuo     2020-11-20  1750  	 * registers.  If "dev" is an RCiEP, the relevant registers are in
5790862255028c drivers/pci/pcie/aer.c        Qiuxu Zhuo     2020-11-20  1751  	 * the RCEC.
5790862255028c drivers/pci/pcie/aer.c        Qiuxu Zhuo     2020-11-20  1752  	 */
5790862255028c drivers/pci/pcie/aer.c        Qiuxu Zhuo     2020-11-20  1753  	if (type == PCI_EXP_TYPE_RC_END)
5790862255028c drivers/pci/pcie/aer.c        Qiuxu Zhuo     2020-11-20 @1754  		root = dev->rcec;
5790862255028c drivers/pci/pcie/aer.c        Qiuxu Zhuo     2020-11-20  1755  	else
7a8a22be35a505 drivers/pci/pcie/aer.c        Keith Busch    2021-01-04  1756  		root = pcie_find_root_port(dev);
5790862255028c drivers/pci/pcie/aer.c        Qiuxu Zhuo     2020-11-20  1757  
5790862255028c drivers/pci/pcie/aer.c        Qiuxu Zhuo     2020-11-20  1758  	/*
5790862255028c drivers/pci/pcie/aer.c        Qiuxu Zhuo     2020-11-20  1759  	 * If the platform retained control of AER, an RCiEP may not have
5790862255028c drivers/pci/pcie/aer.c        Qiuxu Zhuo     2020-11-20  1760  	 * an RCEC visible to us, so dev->rcec ("root") may be NULL.  In
5790862255028c drivers/pci/pcie/aer.c        Qiuxu Zhuo     2020-11-20  1761  	 * that case, firmware is responsible for these registers.
5790862255028c drivers/pci/pcie/aer.c        Qiuxu Zhuo     2020-11-20  1762  	 */
5790862255028c drivers/pci/pcie/aer.c        Qiuxu Zhuo     2020-11-20  1763  	aer = root ? root->aer_cap : 0;
a175102b0a82fc drivers/pci/pcie/aer.c        Sean V Kelley  2020-12-02  1764  
13cf36c648df0c drivers/pci/pcie/aer.c        Kai-Heng Feng  2023-05-12  1765  	if ((host->native_aer || pcie_ports_native) && aer)
13cf36c648df0c drivers/pci/pcie/aer.c        Kai-Heng Feng  2023-05-12  1766  		aer_disable_irq(root);
6c2b374d74857e drivers/pci/pcie/aer/aerdrv.c Zhang, Yanmin  2006-07-31  1767  
5790862255028c drivers/pci/pcie/aer.c        Qiuxu Zhuo     2020-11-20  1768  	if (type == PCI_EXP_TYPE_RC_EC || type == PCI_EXP_TYPE_RC_END) {
9bdc81ce440ec6 drivers/pci/pcie/aer.c        Amey Narkhede  2021-08-17  1769  		rc = pcie_reset_flr(dev, PCI_RESET_DO_RESET);
56f107d7813f11 drivers/pci/pcie/aer.c        Amey Narkhede  2021-08-17  1770  		if (!rc)
56f107d7813f11 drivers/pci/pcie/aer.c        Amey Narkhede  2021-08-17  1771  			pci_info(dev, "has been reset\n");
56f107d7813f11 drivers/pci/pcie/aer.c        Amey Narkhede  2021-08-17  1772  		else
56f107d7813f11 drivers/pci/pcie/aer.c        Amey Narkhede  2021-08-17  1773  			pci_info(dev, "not reset (no FLR support: %d)\n", rc);
a175102b0a82fc drivers/pci/pcie/aer.c        Sean V Kelley  2020-12-02  1774  	} else {
c4eed62a214330 drivers/pci/pcie/aer.c        Keith Busch    2018-09-20  1775  		rc = pci_bus_error_reset(dev);
33ac78bd3b509d drivers/pci/pcie/aer.c        Keith Busch    2021-01-04  1776  		pci_info(dev, "%s Port link has been reset (%d)\n",
33ac78bd3b509d drivers/pci/pcie/aer.c        Keith Busch    2021-01-04  1777  			pci_is_root_bus(dev->bus) ? "Root" : "Downstream", rc);
a175102b0a82fc drivers/pci/pcie/aer.c        Sean V Kelley  2020-12-02  1778  	}
6c2b374d74857e drivers/pci/pcie/aer/aerdrv.c Zhang, Yanmin  2006-07-31  1779  
a175102b0a82fc drivers/pci/pcie/aer.c        Sean V Kelley  2020-12-02  1780  	if ((host->native_aer || pcie_ports_native) && aer) {
c6d34eddecb34f drivers/pci/pcie/aer/aerdrv.c Hidetoshi Seto 2010-04-15  1781  		/* Clear Root Error Status */
a175102b0a82fc drivers/pci/pcie/aer.c        Sean V Kelley  2020-12-02  1782  		pci_read_config_dword(root, aer + PCI_ERR_ROOT_STATUS, &reg32);
a175102b0a82fc drivers/pci/pcie/aer.c        Sean V Kelley  2020-12-02  1783  		pci_write_config_dword(root, aer + PCI_ERR_ROOT_STATUS, reg32);
c6d34eddecb34f drivers/pci/pcie/aer/aerdrv.c Hidetoshi Seto 2010-04-15  1784  
13cf36c648df0c drivers/pci/pcie/aer.c        Kai-Heng Feng  2023-05-12  1785  		aer_enable_irq(root);
50cc18fcd3053f drivers/pci/pcie/aer.c        Sean V Kelley  2020-11-20  1786  	}
6c2b374d74857e drivers/pci/pcie/aer/aerdrv.c Zhang, Yanmin  2006-07-31  1787  
1842623850d09b drivers/pci/pcie/aer.c        Sinan Kaya     2018-07-19  1788  	return rc ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_RECOVERED;
6c2b374d74857e drivers/pci/pcie/aer/aerdrv.c Zhang, Yanmin  2006-07-31  1789  }
6c2b374d74857e drivers/pci/pcie/aer/aerdrv.c Zhang, Yanmin  2006-07-31  1790  
Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
#4 lore raw

PATCH v7 3/6 acpi/ghes: Make GHES select ACPI_APEI_PCIEAER

In reply to Fabio M. De Francesco

GHES handles the PCI Express Error Section and also the Compute Express Link (CXL) Protocol Error Section. Two of its functions depend on the APEI PCIe AER logging/recovering support (ACPI_APEI_PCIEAER).

Make GHES select ACPI_APEI_PCIEAER and remove the conditional compilation from the body of two static functions that handle the CPER Error Sections mentioned above.

---
 drivers/acpi/apei/Kconfig | 2 ++
 drivers/acpi/apei/ghes.c  | 4 ----
 2 files changed, 2 insertions(+), 4 deletions(-)
drivers/acpi/apei/Kconfig +2 -0
index 070c07d68dfb..cdf3cfa233b9 100644
@@ -23,6 +23,8 @@ config ACPI_APEI_GHES
 	select ACPI_HED
 	select IRQ_WORK
 	select GENERIC_ALLOCATOR
+	select PCIEAER
+	select ACPI_APEI_PCIEAER
 	select ARM_SDE_INTERFACE if ARM64
 	help
 	  Generic Hardware Error Source provides a way to report
drivers/acpi/apei/ghes.c +0 -4
index 97ee19f2cae0..d6fe5f020e96 100644
@@ -613,7 +613,6 @@ static bool ghes_handle_arm_hw_error(struct acpi_hest_generic_data *gdata,
  */
 static void ghes_handle_aer(struct acpi_hest_generic_data *gdata)
 {
-#ifdef CONFIG_ACPI_APEI_PCIEAER
 	struct cper_sec_pcie *pcie_err = acpi_hest_get_payload(gdata);
 
 	if (pcie_err->validation_bits & CPER_PCIE_VALID_DEVICE_ID &&
@@ -646,7 +645,6 @@ static void ghes_handle_aer(struct acpi_hest_generic_data *gdata)
 				  (struct aer_capability_regs *)
 				  aer_info);
 	}
-#endif
 }
 
 static BLOCKING_NOTIFIER_HEAD(vendor_record_notify_list);
@@ -711,7 +709,6 @@ struct work_struct *cxl_cper_prot_err_work;
 static void cxl_cper_post_prot_err(struct cxl_cper_sec_prot_err *prot_err,
 				   int severity)
 {
-#ifdef CONFIG_ACPI_APEI_PCIEAER
 	struct cxl_cper_prot_err_work_data wd;
 	u8 *dvsec_start, *cap_start;
 
@@ -767,7 +764,6 @@ static void cxl_cper_post_prot_err(struct cxl_cper_sec_prot_err *prot_err,
 	}
 
 	schedule_work(cxl_cper_prot_err_work);
-#endif
 }
 
 int cxl_cper_register_prot_err_work(struct work_struct *work)
Signature · 1 line
2.51.1
#5 lore raw

Re: [PATCH 3/6 v7] acpi/ghes: Make GHES select ACPI_APEI_PCIEAER

kernel test robot noticed the following build errors:

Hi Fabio,

kernel test robot noticed the following build errors:

[auto build test ERROR on c9cfc122f03711a5124b4aafab3211cf4d35a2ac]

url:    https://github.com/intel-lab-lkp/linux/commits/Fabio-M-De-Francesco/ACPI-extlog-Trace-CPER-Non-standard-Section-Body/20251105-022733
base:   c9cfc122f03711a5124b4aafab3211cf4d35a2ac
patch link:    https://lore.kernel.org/r/20251104182446.863422-4-fabio.m.de.francesco%40linux.intel.com
patch subject: [PATCH 3/6 v7] acpi/ghes: Make GHES select ACPI_APEI_PCIEAER
config: x86_64-randconfig-074-20251105 (https://download.01.org/0day-ci/archive/20251105/[email protected]/config)
compiler: clang version 20.1.8 (https://github.com/llvm/llvm-project 87f0227cb60147a26a1eeb4fb06e3b505e9c7261)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20251105/[email protected]/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All error/warnings (new ones prefixed by >>):

>> drivers/pci/pci-driver.c:1591:6: warning: no previous prototype for function 'pci_uevent_ers' [-Wmissing-prototypes]
    1591 | void pci_uevent_ers(struct pci_dev *pdev, enum pci_ers_result err_type)
         |      ^
   drivers/pci/pci-driver.c:1591:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
    1591 | void pci_uevent_ers(struct pci_dev *pdev, enum pci_ers_result err_type)
         | ^
         | static 
   1 warning generated.
--
>> drivers/pci/pcie/err.c:83:2: error: call to undeclared function 'pci_uevent_ers'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
      83 |         pci_uevent_ers(dev, vote);
         |         ^
   drivers/pci/pcie/err.c:124:2: error: call to undeclared function 'pci_uevent_ers'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
     124 |         pci_uevent_ers(dev, PCI_ERS_RESULT_DISCONNECT);
         |         ^
   drivers/pci/pcie/err.c:182:2: error: call to undeclared function 'pci_uevent_ers'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
     182 |         pci_uevent_ers(dev, PCI_ERS_RESULT_RECOVERED);
         |         ^
   3 errors generated.
--
>> drivers/pci/pcie/aer.c:1754:15: error: no member named 'rcec' in 'struct pci_dev'

1754 | root = dev->rcec;
| ~~~ ^
1 error generated.

Kconfig warnings: (for reference only)
WARNING: unmet direct dependencies detected for PCIEAER Depends on [n]: PCI [=y] && PCIEPORTBUS [=n] Selected by [y]:
- ACPI_APEI_GHES [=y] && ACPI [=y] && ACPI_APEI [=y]

vim +/pci_uevent_ers +83 drivers/pci/pcie/err.c

2e28bc84cf6eecd Oza Pawandeep      2018-05-17  48  
542aeb9c8f930e4 Keith Busch        2018-09-20  49  static int report_error_detected(struct pci_dev *dev,
16d79cd4e23b196 Luc Van Oostenryck 2020-07-02  50  				 pci_channel_state_t state,
542aeb9c8f930e4 Keith Busch        2018-09-20  51  				 enum pci_ers_result *result)
2e28bc84cf6eecd Oza Pawandeep      2018-05-17  52  {
171d149ce8d11f7 Bjorn Helgaas      2021-10-12  53  	struct pci_driver *pdrv;
2e28bc84cf6eecd Oza Pawandeep      2018-05-17  54  	pci_ers_result_t vote;
2e28bc84cf6eecd Oza Pawandeep      2018-05-17  55  	const struct pci_error_handlers *err_handler;
2e28bc84cf6eecd Oza Pawandeep      2018-05-17  56  
2e28bc84cf6eecd Oza Pawandeep      2018-05-17  57  	device_lock(&dev->dev);
e0217c5ba10d7bf Bjorn Helgaas      2021-11-10  58  	pdrv = dev->driver;
5e69a33c5cec019 Christoph Hellwig  2022-06-01  59  	if (pci_dev_is_disconnected(dev)) {
5e69a33c5cec019 Christoph Hellwig  2022-06-01  60  		vote = PCI_ERS_RESULT_DISCONNECT;
5e69a33c5cec019 Christoph Hellwig  2022-06-01  61  	} else if (!pci_dev_set_io_state(dev, state)) {
5e69a33c5cec019 Christoph Hellwig  2022-06-01  62  		pci_info(dev, "can't recover (state transition %u -> %u invalid)\n",
5e69a33c5cec019 Christoph Hellwig  2022-06-01  63  			dev->error_state, state);
5e69a33c5cec019 Christoph Hellwig  2022-06-01  64  		vote = PCI_ERS_RESULT_NONE;
5e69a33c5cec019 Christoph Hellwig  2022-06-01  65  	} else if (!pdrv || !pdrv->err_handler ||
171d149ce8d11f7 Bjorn Helgaas      2021-10-12  66  		   !pdrv->err_handler->error_detected) {
2e28bc84cf6eecd Oza Pawandeep      2018-05-17  67  		/*
bfcb79fca19d267 Keith Busch        2018-09-20  68  		 * If any device in the subtree does not have an error_detected
bfcb79fca19d267 Keith Busch        2018-09-20  69  		 * callback, PCI_ERS_RESULT_NO_AER_DRIVER prevents subsequent
bfcb79fca19d267 Keith Busch        2018-09-20  70  		 * error callbacks of "any" device in the subtree, and will
bfcb79fca19d267 Keith Busch        2018-09-20  71  		 * exit in the disconnected error state.
2e28bc84cf6eecd Oza Pawandeep      2018-05-17  72  		 */
01daacfb9035e5b Yicong Yang        2019-12-13  73  		if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
2e28bc84cf6eecd Oza Pawandeep      2018-05-17  74  			vote = PCI_ERS_RESULT_NO_AER_DRIVER;
8d077c3ce0109c4 Bjorn Helgaas      2019-12-13  75  			pci_info(dev, "can't recover (no error_detected callback)\n");
01daacfb9035e5b Yicong Yang        2019-12-13  76  		} else {
2e28bc84cf6eecd Oza Pawandeep      2018-05-17  77  			vote = PCI_ERS_RESULT_NONE;
01daacfb9035e5b Yicong Yang        2019-12-13  78  		}
2e28bc84cf6eecd Oza Pawandeep      2018-05-17  79  	} else {
171d149ce8d11f7 Bjorn Helgaas      2021-10-12  80  		err_handler = pdrv->err_handler;
542aeb9c8f930e4 Keith Busch        2018-09-20  81  		vote = err_handler->error_detected(dev, state);
2e28bc84cf6eecd Oza Pawandeep      2018-05-17  82  	}
7b42d97e99d3a2b Keith Busch        2018-09-20 @83  	pci_uevent_ers(dev, vote);
542aeb9c8f930e4 Keith Busch        2018-09-20  84  	*result = merge_result(*result, vote);
2e28bc84cf6eecd Oza Pawandeep      2018-05-17  85  	device_unlock(&dev->dev);
2e28bc84cf6eecd Oza Pawandeep      2018-05-17  86  	return 0;
2e28bc84cf6eecd Oza Pawandeep      2018-05-17  87  }
2e28bc84cf6eecd Oza Pawandeep      2018-05-17  88  
Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
#6 lore raw

Re: [PATCH 3/6 v7] acpi/ghes: Make GHES select ACPI_APEI_PCIEAER

In reply to Fabio M. De Francesco
Quoted 7 lines · On Tue, 4 Nov 2025 19:22:34 +0100 "Fabio M. De Francesco"…

GHES handles the PCI Express Error Section and also the Compute Express Link (CXL) Protocol Error Section. Two of its functions depend on the APEI PCIe AER logging/recovering support (ACPI_APEI_PCIEAER).

Make GHES select ACPI_APEI_PCIEAER and remove the conditional compilation from the body of two static functions that handle the CPER Error Sections mentioned above.

Hi Fabio,

I'm not seeing a justification here for the change and there may be APEI platforms without PCI support. So is this just to simplify things or is there a functional reason that it is necessary?

Jonathan

Quoted 56 lines
---
 drivers/acpi/apei/Kconfig | 2 ++
 drivers/acpi/apei/ghes.c  | 4 ----
 2 files changed, 2 insertions(+), 4 deletions(-)
drivers/acpi/apei/Kconfig +2 -0
index 070c07d68dfb..cdf3cfa233b9 100644
@@ -23,6 +23,8 @@ config ACPI_APEI_GHES
 	select ACPI_HED
 	select IRQ_WORK
 	select GENERIC_ALLOCATOR
+	select PCIEAER
+	select ACPI_APEI_PCIEAER
 	select ARM_SDE_INTERFACE if ARM64
 	help
 	  Generic Hardware Error Source provides a way to report
drivers/acpi/apei/ghes.c +0 -4
index 97ee19f2cae0..d6fe5f020e96 100644
@@ -613,7 +613,6 @@ static bool ghes_handle_arm_hw_error(struct acpi_hest_generic_data *gdata,
  */
 static void ghes_handle_aer(struct acpi_hest_generic_data *gdata)
 {
-#ifdef CONFIG_ACPI_APEI_PCIEAER
 	struct cper_sec_pcie *pcie_err = acpi_hest_get_payload(gdata);
 
 	if (pcie_err->validation_bits & CPER_PCIE_VALID_DEVICE_ID &&
@@ -646,7 +645,6 @@ static void ghes_handle_aer(struct acpi_hest_generic_data *gdata)
 				  (struct aer_capability_regs *)
 				  aer_info);
 	}
-#endif
 }
 
 static BLOCKING_NOTIFIER_HEAD(vendor_record_notify_list);
@@ -711,7 +709,6 @@ struct work_struct *cxl_cper_prot_err_work;
 static void cxl_cper_post_prot_err(struct cxl_cper_sec_prot_err *prot_err,
 				   int severity)
 {
-#ifdef CONFIG_ACPI_APEI_PCIEAER
 	struct cxl_cper_prot_err_work_data wd;
 	u8 *dvsec_start, *cap_start;
 
@@ -767,7 +764,6 @@ static void cxl_cper_post_prot_err(struct cxl_cper_sec_prot_err *prot_err,
 	}
 
 	schedule_work(cxl_cper_prot_err_work);
-#endif
 }
 
 int cxl_cper_register_prot_err_work(struct work_struct *work)
reviewer
#7 lore raw

Re: [PATCH 3/6 v7] acpi/ghes: Make GHES select ACPI_APEI_PCIEAER

Quoted 11 lines · Jonathan Cameron
Quoted 7 lines · On Tue, 4 Nov 2025 19:22:34 +0100 "Fabio M. De Francesco"…

GHES handles the PCI Express Error Section and also the Compute Express Link (CXL) Protocol Error Section. Two of its functions depend on the APEI PCIe AER logging/recovering support (ACPI_APEI_PCIEAER).

Make GHES select ACPI_APEI_PCIEAER and remove the conditional compilation from the body of two static functions that handle the CPER Error Sections mentioned above.

Quoted 5 lines

Hi Fabio,

I'm not seeing a justification here for the change and there may be APEI platforms without PCI support. So is this just to simplify things or is there a functional reason that it is necessary?

I have the same worry, embedded system with ACPI support may don't have PCI. And for APEI, AER is one of the error type and optional.

Thanks
Hanjun

#8 lore raw

PATCH v7 4/6 acpi/ghes: Add helper for CXL protocol errors checks

In reply to Fabio M. De Francesco

Move the CPER CXL protocol errors validity check out of cxl_cper_post_prot_err() to new cxl_cper_sec_prot_err_valid() and limit the serial number check only to CXL agents that are CXL devices (UEFI v2.10, Appendix N.2.13).

Export the new symbol for reuse by ELOG.

---
 drivers/acpi/apei/ghes.c | 32 ++++++++++++++++++++++----------
 include/cxl/event.h      | 10 ++++++++++
 2 files changed, 32 insertions(+), 10 deletions(-)
drivers/acpi/apei/ghes.c +22 -10
index d6fe5f020e96..e69ae864f43d 100644
@@ -706,30 +706,42 @@ static DEFINE_KFIFO(cxl_cper_prot_err_fifo, struct cxl_cper_prot_err_work_data,
 static DEFINE_SPINLOCK(cxl_cper_prot_err_work_lock);
 struct work_struct *cxl_cper_prot_err_work;
 
-static void cxl_cper_post_prot_err(struct cxl_cper_sec_prot_err *prot_err,
-				   int severity)
+int cxl_cper_sec_prot_err_valid(struct cxl_cper_sec_prot_err *prot_err)
 {
-	struct cxl_cper_prot_err_work_data wd;
-	u8 *dvsec_start, *cap_start;
-
 	if (!(prot_err->valid_bits & PROT_ERR_VALID_AGENT_ADDRESS)) {
 		pr_err_ratelimited("CXL CPER invalid agent type\n");
-		return;
+		return -EINVAL;
 	}
 
 	if (!(prot_err->valid_bits & PROT_ERR_VALID_ERROR_LOG)) {
 		pr_err_ratelimited("CXL CPER invalid protocol error log\n");
-		return;
+		return -EINVAL;
 	}
 
 	if (prot_err->err_len != sizeof(struct cxl_ras_capability_regs)) {
 		pr_err_ratelimited("CXL CPER invalid RAS Cap size (%u)\n",
 				   prot_err->err_len);
-		return;
+		return -EINVAL;
 	}
 
-	if (!(prot_err->valid_bits & PROT_ERR_VALID_SERIAL_NUMBER))
-		pr_warn(FW_WARN "CXL CPER no device serial number\n");
+	if ((prot_err->agent_type == RCD || prot_err->agent_type == DEVICE ||
+	     prot_err->agent_type == LD || prot_err->agent_type == FMLD) &&
+	    !(prot_err->valid_bits & PROT_ERR_VALID_SERIAL_NUMBER))
+		pr_warn_ratelimited(FW_WARN
+				    "CXL CPER no device serial number\n");
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cxl_cper_sec_prot_err_valid);
+
+static void cxl_cper_post_prot_err(struct cxl_cper_sec_prot_err *prot_err,
+				   int severity)
+{
+	struct cxl_cper_prot_err_work_data wd;
+	u8 *dvsec_start, *cap_start;
+
+	if (cxl_cper_sec_prot_err_valid(prot_err))
+		return;
 
 	guard(spinlock_irqsave)(&cxl_cper_prot_err_work_lock);
 
include/cxl/event.h +10 -0
index 6fd90f9cc203..4d7d1036ea9c 100644
@@ -320,4 +320,14 @@ static inline int cxl_cper_prot_err_kfifo_get(struct cxl_cper_prot_err_work_data
 }
 #endif
 
+#ifdef CONFIG_ACPI_APEI_PCIEAER
+int cxl_cper_sec_prot_err_valid(struct cxl_cper_sec_prot_err *prot_err);
+#else
+static inline int
+cxl_cper_sec_prot_err_valid(struct cxl_cper_sec_prot_err *prot_err)
+{
+	return -EOPNOTSUPP;
+}
+#endif
+
 #endif /* _LINUX_CXL_EVENT_H */
Signature · 1 line
2.51.1
maintainer Reviewed-by on v7 4/6
#9 lore raw

Re: [PATCH 4/6 v7] acpi/ghes: Add helper for CXL protocol errors checks

Quoted 8 lines · Fabio M. De Francesco

Move the CPER CXL protocol errors validity check out of cxl_cper_post_prot_err() to new cxl_cper_sec_prot_err_valid() and limit the serial number check only to CXL agents that are CXL devices (UEFI v2.10, Appendix N.2.13).

Export the new symbol for reuse by ELOG.

Quoted 80 lines
 drivers/acpi/apei/ghes.c | 32 ++++++++++++++++++++++----------
 include/cxl/event.h      | 10 ++++++++++
 2 files changed, 32 insertions(+), 10 deletions(-)
drivers/acpi/apei/ghes.c +22 -10
index d6fe5f020e96..e69ae864f43d 100644
@@ -706,30 +706,42 @@ static DEFINE_KFIFO(cxl_cper_prot_err_fifo, struct cxl_cper_prot_err_work_data,
 static DEFINE_SPINLOCK(cxl_cper_prot_err_work_lock);
 struct work_struct *cxl_cper_prot_err_work;
 
-static void cxl_cper_post_prot_err(struct cxl_cper_sec_prot_err *prot_err,
-				   int severity)
+int cxl_cper_sec_prot_err_valid(struct cxl_cper_sec_prot_err *prot_err)
 {
-	struct cxl_cper_prot_err_work_data wd;
-	u8 *dvsec_start, *cap_start;
-
 	if (!(prot_err->valid_bits & PROT_ERR_VALID_AGENT_ADDRESS)) {
 		pr_err_ratelimited("CXL CPER invalid agent type\n");
-		return;
+		return -EINVAL;
 	}
 
 	if (!(prot_err->valid_bits & PROT_ERR_VALID_ERROR_LOG)) {
 		pr_err_ratelimited("CXL CPER invalid protocol error log\n");
-		return;
+		return -EINVAL;
 	}
 
 	if (prot_err->err_len != sizeof(struct cxl_ras_capability_regs)) {
 		pr_err_ratelimited("CXL CPER invalid RAS Cap size (%u)\n",
 				   prot_err->err_len);
-		return;
+		return -EINVAL;
 	}
 
-	if (!(prot_err->valid_bits & PROT_ERR_VALID_SERIAL_NUMBER))
-		pr_warn(FW_WARN "CXL CPER no device serial number\n");
+	if ((prot_err->agent_type == RCD || prot_err->agent_type == DEVICE ||
+	     prot_err->agent_type == LD || prot_err->agent_type == FMLD) &&
+	    !(prot_err->valid_bits & PROT_ERR_VALID_SERIAL_NUMBER))
+		pr_warn_ratelimited(FW_WARN
+				    "CXL CPER no device serial number\n");
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cxl_cper_sec_prot_err_valid);
+
+static void cxl_cper_post_prot_err(struct cxl_cper_sec_prot_err *prot_err,
+				   int severity)
+{
+	struct cxl_cper_prot_err_work_data wd;
+	u8 *dvsec_start, *cap_start;
+
+	if (cxl_cper_sec_prot_err_valid(prot_err))
+		return;
 
 	guard(spinlock_irqsave)(&cxl_cper_prot_err_work_lock);
 
include/cxl/event.h +10 -0
index 6fd90f9cc203..4d7d1036ea9c 100644
@@ -320,4 +320,14 @@ static inline int cxl_cper_prot_err_kfifo_get(struct cxl_cper_prot_err_work_data
 }
 #endif
 
+#ifdef CONFIG_ACPI_APEI_PCIEAER
+int cxl_cper_sec_prot_err_valid(struct cxl_cper_sec_prot_err *prot_err);
+#else
+static inline int
+cxl_cper_sec_prot_err_valid(struct cxl_cper_sec_prot_err *prot_err)
+{
+	return -EOPNOTSUPP;
+}
+#endif
+
 #endif /* _LINUX_CXL_EVENT_H */
Reviewed-by on v7 4/6
#10 lore raw

Re: [PATCH 4/6 v7] acpi/ghes: Add helper for CXL protocol errors checks

In reply to Fabio M. De Francesco
Quoted 8 lines · On Tue, 4 Nov 2025 19:22:35 +0100 "Fabio M. De Francesco"…

Move the CPER CXL protocol errors validity check out of cxl_cper_post_prot_err() to new cxl_cper_sec_prot_err_valid() and limit the serial number check only to CXL agents that are CXL devices (UEFI v2.10, Appendix N.2.13).

Export the new symbol for reuse by ELOG.

reviewer Reviewed-by on v7 4/6
#11 lore raw

Re: [PATCH 4/6 v7] acpi/ghes: Add helper for CXL protocol errors checks

In reply to Fabio M. De Francesco
Quoted 79 lines · Fabio M. De Francesco

Move the CPER CXL protocol errors validity check out of cxl_cper_post_prot_err() to new cxl_cper_sec_prot_err_valid() and limit the serial number check only to CXL agents that are CXL devices (UEFI v2.10, Appendix N.2.13).

Export the new symbol for reuse by ELOG.

---
  drivers/acpi/apei/ghes.c | 32 ++++++++++++++++++++++----------
  include/cxl/event.h      | 10 ++++++++++
  2 files changed, 32 insertions(+), 10 deletions(-)
drivers/acpi/apei/ghes.c +22 -10
index d6fe5f020e96..e69ae864f43d 100644
@@ -706,30 +706,42 @@ static DEFINE_KFIFO(cxl_cper_prot_err_fifo, struct cxl_cper_prot_err_work_data,
  static DEFINE_SPINLOCK(cxl_cper_prot_err_work_lock);
  struct work_struct *cxl_cper_prot_err_work;
 
-static void cxl_cper_post_prot_err(struct cxl_cper_sec_prot_err *prot_err,
-				   int severity)
+int cxl_cper_sec_prot_err_valid(struct cxl_cper_sec_prot_err *prot_err)
  {
-	struct cxl_cper_prot_err_work_data wd;
-	u8 *dvsec_start, *cap_start;
-
  	if (!(prot_err->valid_bits & PROT_ERR_VALID_AGENT_ADDRESS)) {
  		pr_err_ratelimited("CXL CPER invalid agent type\n");
-		return;
+		return -EINVAL;
  	}
 
  	if (!(prot_err->valid_bits & PROT_ERR_VALID_ERROR_LOG)) {
  		pr_err_ratelimited("CXL CPER invalid protocol error log\n");
-		return;
+		return -EINVAL;
  	}
 
  	if (prot_err->err_len != sizeof(struct cxl_ras_capability_regs)) {
  		pr_err_ratelimited("CXL CPER invalid RAS Cap size (%u)\n",
  				   prot_err->err_len);
-		return;
+		return -EINVAL;
  	}
 
-	if (!(prot_err->valid_bits & PROT_ERR_VALID_SERIAL_NUMBER))
-		pr_warn(FW_WARN "CXL CPER no device serial number\n");
+	if ((prot_err->agent_type == RCD || prot_err->agent_type == DEVICE ||
+	     prot_err->agent_type == LD || prot_err->agent_type == FMLD) &&
+	    !(prot_err->valid_bits & PROT_ERR_VALID_SERIAL_NUMBER))
+		pr_warn_ratelimited(FW_WARN
+				    "CXL CPER no device serial number\n");
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cxl_cper_sec_prot_err_valid);
+
+static void cxl_cper_post_prot_err(struct cxl_cper_sec_prot_err *prot_err,
+				   int severity)
+{
+	struct cxl_cper_prot_err_work_data wd;
+	u8 *dvsec_start, *cap_start;
+
+	if (cxl_cper_sec_prot_err_valid(prot_err))
+		return;
 
  	guard(spinlock_irqsave)(&cxl_cper_prot_err_work_lock);
 
include/cxl/event.h +1 -0
index 6fd90f9cc203..4d7d1036ea9c 100644
@@ -320,4 +320,14 @@ static inline int cxl_cper_prot_err_kfifo_get(struct cxl_cper_prot_err_work_data
  }
  #endif
 
+#ifdef CONFIG_ACPI_APEI_PCIEAER

include/cxl/event.h static inline int cxl_cper_prot_err_kfifo_get(struct cxl_cper_prot_err_work_data · line 333

Quoted 10 lines
include/cxl/event.h +9 -0
+int cxl_cper_sec_prot_err_valid(struct cxl_cper_sec_prot_err *prot_err);
+#else
+static inline int
+cxl_cper_sec_prot_err_valid(struct cxl_cper_sec_prot_err *prot_err)
+{
+	return -EOPNOTSUPP;
+}
+#endif
+
  #endif /* _LINUX_CXL_EVENT_H */

Thanks
Hanjun

#12 lore raw

PATCH v7 5/6 acpi/ghes: Add helper to copy CXL protocol error info to work struct

In reply to Fabio M. De Francesco

Make a helper out of cxl_cper_post_prot_err() that checks the CXL agent type and copy the CPER CXL protocol errors information to a work data structure.

Export the new symbol for reuse by ELOG.

---
 drivers/acpi/apei/ghes.c | 42 ++++++++++++++++++++++++++--------------
 include/cxl/event.h      | 10 ++++++++++
 2 files changed, 37 insertions(+), 15 deletions(-)
drivers/acpi/apei/ghes.c +27 -15
index e69ae864f43d..2f4632d9855a 100644
@@ -734,20 +734,12 @@ int cxl_cper_sec_prot_err_valid(struct cxl_cper_sec_prot_err *prot_err)
 }
 EXPORT_SYMBOL_GPL(cxl_cper_sec_prot_err_valid);
 
-static void cxl_cper_post_prot_err(struct cxl_cper_sec_prot_err *prot_err,
-				   int severity)
+int cxl_cper_setup_prot_err_work_data(struct cxl_cper_prot_err_work_data *wd,
+				      struct cxl_cper_sec_prot_err *prot_err,
+				      int severity)
 {
-	struct cxl_cper_prot_err_work_data wd;
 	u8 *dvsec_start, *cap_start;
 
-	if (cxl_cper_sec_prot_err_valid(prot_err))
-		return;
-
-	guard(spinlock_irqsave)(&cxl_cper_prot_err_work_lock);
-
-	if (!cxl_cper_prot_err_work)
-		return;
-
 	switch (prot_err->agent_type) {
 	case RCD:
 	case DEVICE:
@@ -756,20 +748,40 @@ static void cxl_cper_post_prot_err(struct cxl_cper_sec_prot_err *prot_err,
 	case RP:
 	case DSP:
 	case USP:
-		memcpy(&wd.prot_err, prot_err, sizeof(wd.prot_err));
+		memcpy(&wd->prot_err, prot_err, sizeof(wd->prot_err));
 
 		dvsec_start = (u8 *)(prot_err + 1);
 		cap_start = dvsec_start + prot_err->dvsec_len;
 
-		memcpy(&wd.ras_cap, cap_start, sizeof(wd.ras_cap));
-		wd.severity = cper_severity_to_aer(severity);
+		memcpy(&wd->ras_cap, cap_start, sizeof(wd->ras_cap));
+		wd->severity = cper_severity_to_aer(severity);
 		break;
 	default:
 		pr_err_ratelimited("CXL CPER invalid agent type: %d\n",
 				   prot_err->agent_type);
-		return;
+		return -EINVAL;
 	}
 
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cxl_cper_setup_prot_err_work_data);
+
+static void cxl_cper_post_prot_err(struct cxl_cper_sec_prot_err *prot_err,
+				   int severity)
+{
+	struct cxl_cper_prot_err_work_data wd;
+
+	if (cxl_cper_sec_prot_err_valid(prot_err))
+		return;
+
+	guard(spinlock_irqsave)(&cxl_cper_prot_err_work_lock);
+
+	if (!cxl_cper_prot_err_work)
+		return;
+
+	if (cxl_cper_setup_prot_err_work_data(&wd, prot_err, severity))
+		return;
+
 	if (!kfifo_put(&cxl_cper_prot_err_fifo, wd)) {
 		pr_err_ratelimited("CXL CPER kfifo overflow\n");
 		return;
include/cxl/event.h +10 -0
index 4d7d1036ea9c..94081aec597a 100644
@@ -322,12 +322,22 @@ static inline int cxl_cper_prot_err_kfifo_get(struct cxl_cper_prot_err_work_data
 
 #ifdef CONFIG_ACPI_APEI_PCIEAER
 int cxl_cper_sec_prot_err_valid(struct cxl_cper_sec_prot_err *prot_err);
+int cxl_cper_setup_prot_err_work_data(struct cxl_cper_prot_err_work_data *wd,
+				      struct cxl_cper_sec_prot_err *prot_err,
+				      int severity);
 #else
 static inline int
 cxl_cper_sec_prot_err_valid(struct cxl_cper_sec_prot_err *prot_err)
 {
 	return -EOPNOTSUPP;
 }
+static inline int
+cxl_cper_setup_prot_err_work_data(struct cxl_cper_prot_err_work_data *wd,
+				  struct cxl_cper_sec_prot_err *prot_err,
+				  int severity)
+{
+	return -EOPNOTSUPP;
+}
 #endif
 
 #endif /* _LINUX_CXL_EVENT_H */
Signature · 1 line
2.51.1
maintainer Reviewed-by on v7 5/6
#13 lore raw

Re: [PATCH 5/6 v7] acpi/ghes: Add helper to copy CXL protocol error info to work struct

Quoted 8 lines · Fabio M. De Francesco

Make a helper out of cxl_cper_post_prot_err() that checks the CXL agent type and copy the CPER CXL protocol errors information to a work data structure.

Export the new symbol for reuse by ELOG.

Quoted 104 lines
 drivers/acpi/apei/ghes.c | 42 ++++++++++++++++++++++++++--------------
 include/cxl/event.h      | 10 ++++++++++
 2 files changed, 37 insertions(+), 15 deletions(-)
drivers/acpi/apei/ghes.c +27 -15
index e69ae864f43d..2f4632d9855a 100644
@@ -734,20 +734,12 @@ int cxl_cper_sec_prot_err_valid(struct cxl_cper_sec_prot_err *prot_err)
 }
 EXPORT_SYMBOL_GPL(cxl_cper_sec_prot_err_valid);
 
-static void cxl_cper_post_prot_err(struct cxl_cper_sec_prot_err *prot_err,
-				   int severity)
+int cxl_cper_setup_prot_err_work_data(struct cxl_cper_prot_err_work_data *wd,
+				      struct cxl_cper_sec_prot_err *prot_err,
+				      int severity)
 {
-	struct cxl_cper_prot_err_work_data wd;
 	u8 *dvsec_start, *cap_start;
 
-	if (cxl_cper_sec_prot_err_valid(prot_err))
-		return;
-
-	guard(spinlock_irqsave)(&cxl_cper_prot_err_work_lock);
-
-	if (!cxl_cper_prot_err_work)
-		return;
-
 	switch (prot_err->agent_type) {
 	case RCD:
 	case DEVICE:
@@ -756,20 +748,40 @@ static void cxl_cper_post_prot_err(struct cxl_cper_sec_prot_err *prot_err,
 	case RP:
 	case DSP:
 	case USP:
-		memcpy(&wd.prot_err, prot_err, sizeof(wd.prot_err));
+		memcpy(&wd->prot_err, prot_err, sizeof(wd->prot_err));
 
 		dvsec_start = (u8 *)(prot_err + 1);
 		cap_start = dvsec_start + prot_err->dvsec_len;
 
-		memcpy(&wd.ras_cap, cap_start, sizeof(wd.ras_cap));
-		wd.severity = cper_severity_to_aer(severity);
+		memcpy(&wd->ras_cap, cap_start, sizeof(wd->ras_cap));
+		wd->severity = cper_severity_to_aer(severity);
 		break;
 	default:
 		pr_err_ratelimited("CXL CPER invalid agent type: %d\n",
 				   prot_err->agent_type);
-		return;
+		return -EINVAL;
 	}
 
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cxl_cper_setup_prot_err_work_data);
+
+static void cxl_cper_post_prot_err(struct cxl_cper_sec_prot_err *prot_err,
+				   int severity)
+{
+	struct cxl_cper_prot_err_work_data wd;
+
+	if (cxl_cper_sec_prot_err_valid(prot_err))
+		return;
+
+	guard(spinlock_irqsave)(&cxl_cper_prot_err_work_lock);
+
+	if (!cxl_cper_prot_err_work)
+		return;
+
+	if (cxl_cper_setup_prot_err_work_data(&wd, prot_err, severity))
+		return;
+
 	if (!kfifo_put(&cxl_cper_prot_err_fifo, wd)) {
 		pr_err_ratelimited("CXL CPER kfifo overflow\n");
 		return;
include/cxl/event.h +10 -0
index 4d7d1036ea9c..94081aec597a 100644
@@ -322,12 +322,22 @@ static inline int cxl_cper_prot_err_kfifo_get(struct cxl_cper_prot_err_work_data
 
 #ifdef CONFIG_ACPI_APEI_PCIEAER
 int cxl_cper_sec_prot_err_valid(struct cxl_cper_sec_prot_err *prot_err);
+int cxl_cper_setup_prot_err_work_data(struct cxl_cper_prot_err_work_data *wd,
+				      struct cxl_cper_sec_prot_err *prot_err,
+				      int severity);
 #else
 static inline int
 cxl_cper_sec_prot_err_valid(struct cxl_cper_sec_prot_err *prot_err)
 {
 	return -EOPNOTSUPP;
 }
+static inline int
+cxl_cper_setup_prot_err_work_data(struct cxl_cper_prot_err_work_data *wd,
+				  struct cxl_cper_sec_prot_err *prot_err,
+				  int severity)
+{
+	return -EOPNOTSUPP;
+}
 #endif
 
 #endif /* _LINUX_CXL_EVENT_H */
reviewer Reviewed-by on v7 5/6
#14 lore raw

Re: [PATCH 5/6 v7] acpi/ghes: Add helper to copy CXL protocol error info to work struct

In reply to Fabio M. De Francesco
Quoted 103 lines · Fabio M. De Francesco

Make a helper out of cxl_cper_post_prot_err() that checks the CXL agent type and copy the CPER CXL protocol errors information to a work data structure.

Export the new symbol for reuse by ELOG.

---
  drivers/acpi/apei/ghes.c | 42 ++++++++++++++++++++++++++--------------
  include/cxl/event.h      | 10 ++++++++++
  2 files changed, 37 insertions(+), 15 deletions(-)
drivers/acpi/apei/ghes.c +27 -15
index e69ae864f43d..2f4632d9855a 100644
@@ -734,20 +734,12 @@ int cxl_cper_sec_prot_err_valid(struct cxl_cper_sec_prot_err *prot_err)
  }
  EXPORT_SYMBOL_GPL(cxl_cper_sec_prot_err_valid);
 
-static void cxl_cper_post_prot_err(struct cxl_cper_sec_prot_err *prot_err,
-				   int severity)
+int cxl_cper_setup_prot_err_work_data(struct cxl_cper_prot_err_work_data *wd,
+				      struct cxl_cper_sec_prot_err *prot_err,
+				      int severity)
  {
-	struct cxl_cper_prot_err_work_data wd;
  	u8 *dvsec_start, *cap_start;
 
-	if (cxl_cper_sec_prot_err_valid(prot_err))
-		return;
-
-	guard(spinlock_irqsave)(&cxl_cper_prot_err_work_lock);
-
-	if (!cxl_cper_prot_err_work)
-		return;
-
  	switch (prot_err->agent_type) {
  	case RCD:
  	case DEVICE:
@@ -756,20 +748,40 @@ static void cxl_cper_post_prot_err(struct cxl_cper_sec_prot_err *prot_err,
  	case RP:
  	case DSP:
  	case USP:
-		memcpy(&wd.prot_err, prot_err, sizeof(wd.prot_err));
+		memcpy(&wd->prot_err, prot_err, sizeof(wd->prot_err));
 
  		dvsec_start = (u8 *)(prot_err + 1);
  		cap_start = dvsec_start + prot_err->dvsec_len;
 
-		memcpy(&wd.ras_cap, cap_start, sizeof(wd.ras_cap));
-		wd.severity = cper_severity_to_aer(severity);
+		memcpy(&wd->ras_cap, cap_start, sizeof(wd->ras_cap));
+		wd->severity = cper_severity_to_aer(severity);
  		break;
  	default:
  		pr_err_ratelimited("CXL CPER invalid agent type: %d\n",
  				   prot_err->agent_type);
-		return;
+		return -EINVAL;
  	}
 
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cxl_cper_setup_prot_err_work_data);
+
+static void cxl_cper_post_prot_err(struct cxl_cper_sec_prot_err *prot_err,
+				   int severity)
+{
+	struct cxl_cper_prot_err_work_data wd;
+
+	if (cxl_cper_sec_prot_err_valid(prot_err))
+		return;
+
+	guard(spinlock_irqsave)(&cxl_cper_prot_err_work_lock);
+
+	if (!cxl_cper_prot_err_work)
+		return;
+
+	if (cxl_cper_setup_prot_err_work_data(&wd, prot_err, severity))
+		return;
+
  	if (!kfifo_put(&cxl_cper_prot_err_fifo, wd)) {
  		pr_err_ratelimited("CXL CPER kfifo overflow\n");
  		return;
include/cxl/event.h +3 -0
index 4d7d1036ea9c..94081aec597a 100644
@@ -322,12 +322,22 @@ static inline int cxl_cper_prot_err_kfifo_get(struct cxl_cper_prot_err_work_data
 
  #ifdef CONFIG_ACPI_APEI_PCIEAER
  int cxl_cper_sec_prot_err_valid(struct cxl_cper_sec_prot_err *prot_err);
+int cxl_cper_setup_prot_err_work_data(struct cxl_cper_prot_err_work_data *wd,
+				      struct cxl_cper_sec_prot_err *prot_err,
+				      int severity);
  #else
  static inline int
  cxl_cper_sec_prot_err_valid(struct cxl_cper_sec_prot_err *prot_err)
  {
  	return -EOPNOTSUPP;
  }

include/cxl/event.h static inline int cxl_cper_prot_err_kfifo_get(struct cxl_cper_prot_err_work_data · line 343

Quoted 10 lines
include/cxl/event.h +7 -0
+static inline int
+cxl_cper_setup_prot_err_work_data(struct cxl_cper_prot_err_work_data *wd,
+				  struct cxl_cper_sec_prot_err *prot_err,
+				  int severity)
+{
+	return -EOPNOTSUPP;
+}
  #endif
 
  #endif /* _LINUX_CXL_EVENT_H */

Thanks
Hanjun

#15 lore raw

PATCH v7 6/6 ACPI: extlog: Trace CPER CXL Protocol Error Section

In reply to Fabio M. De Francesco

When Firmware First is enabled, BIOS handles errors first and then it makes them available to the kernel via the Common Platform Error Record (CPER) sections (UEFI 2.11 Appendix N.2.13). Linux parses the CPER sections via one of two similar paths, either ELOG or GHES. The errors managed by ELOG are signaled to the BIOS by the I/O Machine Check Architecture (I/O MCA).

Currently, ELOG and GHES show some inconsistencies in how they report to userspace via trace events.

Therefore, make the two mentioned paths act similarly by tracing the CPER CXL Protocol Error Section.

---
 drivers/acpi/Kconfig       |  1 +
 drivers/acpi/acpi_extlog.c | 22 ++++++++++++++++++++++
 drivers/cxl/core/ras.c     |  3 ++-
 include/cxl/event.h        |  2 ++
 4 files changed, 27 insertions(+), 1 deletion(-)
drivers/acpi/Kconfig +1 -0
index be02634f2320..c2ad24e77ddf 100644
@@ -498,6 +498,7 @@ config ACPI_EXTLOG
 	select ACPI_APEI
 	select ACPI_APEI_PCIEAER
 	select UEFI_CPER
+	select CXL_BUS
 	help
 	  Certain usages such as Predictive Failure Analysis (PFA) require
 	  more information about the error than what can be described in
drivers/acpi/acpi_extlog.c +22 -0
index b3976ceb4ee4..e6fb25395984 100644
@@ -12,6 +12,7 @@
 #include <linux/ratelimit.h>
 #include <linux/edac.h>
 #include <linux/ras.h>
+#include <cxl/event.h>
 #include <acpi/ghes.h>
 #include <asm/cpu.h>
 #include <asm/mce.h>
@@ -160,6 +161,21 @@ static void extlog_print_pcie(struct cper_sec_pcie *pcie_err,
 	pci_dev_put(pdev);
 }
 
+static void
+extlog_cxl_cper_handle_prot_err(struct cxl_cper_sec_prot_err *prot_err,
+				int severity)
+{
+	struct cxl_cper_prot_err_work_data wd;
+
+	if (cxl_cper_sec_prot_err_valid(prot_err))
+		return;
+
+	if (cxl_cper_setup_prot_err_work_data(&wd, prot_err, severity))
+		return;
+
+	cxl_cper_handle_prot_err(&wd);
+}
+
 static int extlog_print(struct notifier_block *nb, unsigned long val,
 			void *data)
 {
@@ -211,6 +227,12 @@ static int extlog_print(struct notifier_block *nb, unsigned long val,
 			if (gdata->error_data_length >= sizeof(*mem))
 				trace_extlog_mem_event(mem, err_seq, fru_id, fru_text,
 						       (u8)gdata->error_severity);
+		} else if (guid_equal(sec_type, &CPER_SEC_CXL_PROT_ERR)) {
+			struct cxl_cper_sec_prot_err *prot_err =
+				acpi_hest_get_payload(gdata);
+
+			extlog_cxl_cper_handle_prot_err(prot_err,
+							gdata->error_severity);
 		} else if (guid_equal(sec_type, &CPER_SEC_PCIE)) {
 			struct cper_sec_pcie *pcie_err = acpi_hest_get_payload(gdata);
 
drivers/cxl/core/ras.c +2 -1
index 2731ba3a0799..a90480d07c87 100644
@@ -63,7 +63,7 @@ static int match_memdev_by_parent(struct device *dev, const void *uport)
 	return 0;
 }
 
-static void cxl_cper_handle_prot_err(struct cxl_cper_prot_err_work_data *data)
+void cxl_cper_handle_prot_err(struct cxl_cper_prot_err_work_data *data)
 {
 	unsigned int devfn = PCI_DEVFN(data->prot_err.agent_addr.device,
 				       data->prot_err.agent_addr.function);
@@ -104,6 +104,7 @@ static void cxl_cper_handle_prot_err(struct cxl_cper_prot_err_work_data *data)
 	else
 		cxl_cper_trace_uncorr_prot_err(cxlmd, data->ras_cap);
 }
+EXPORT_SYMBOL_GPL(cxl_cper_handle_prot_err);
 
 static void cxl_cper_prot_err_work_fn(struct work_struct *work)
 {
include/cxl/event.h +2 -0
index 94081aec597a..ff97fea718d2 100644
@@ -340,4 +340,6 @@ cxl_cper_setup_prot_err_work_data(struct cxl_cper_prot_err_work_data *wd,
 }
 #endif
 
+void cxl_cper_handle_prot_err(struct cxl_cper_prot_err_work_data *wd);
+
 #endif /* _LINUX_CXL_EVENT_H */
Signature · 1 line
2.51.1
#16 lore raw

Re: [PATCH 6/6 v7] ACPI: extlog: Trace CPER CXL Protocol Error Section

kernel test robot noticed the following build errors:

Hi Fabio,

kernel test robot noticed the following build errors:

[auto build test ERROR on c9cfc122f03711a5124b4aafab3211cf4d35a2ac]

url:    https://github.com/intel-lab-lkp/linux/commits/Fabio-M-De-Francesco/ACPI-extlog-Trace-CPER-Non-standard-Section-Body/20251105-022733
base:   c9cfc122f03711a5124b4aafab3211cf4d35a2ac
patch link:    https://lore.kernel.org/r/20251104182446.863422-7-fabio.m.de.francesco%40linux.intel.com
patch subject: [PATCH 6/6 v7] ACPI: extlog: Trace CPER CXL Protocol Error Section
config: x86_64-buildonly-randconfig-006-20251105 (https://download.01.org/0day-ci/archive/20251105/[email protected]/config)
compiler: gcc-13 (Debian 13.3.0-16) 13.3.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20251105/[email protected]/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All errors (new ones prefixed by >>):

In file included from drivers/cxl/core/pci.c:10:
drivers/cxl/cxlpci.h: In function 'cxl_pci_flit_256':
drivers/cxl/cxlpci.h:126:9: error: implicit declaration of function 'pcie_capability_read_word' [-Werror=implicit-function-declaration]

     126 |         pcie_capability_read_word(pdev, PCI_EXP_LNKSTA2, &lnksta2);
         |         ^~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/cxl/core/pci.c: In function 'devm_cxl_port_enumerate_dports':
   drivers/cxl/core/pci.c:143:9: error: implicit declaration of function 'pci_walk_bus' [-Werror=implicit-function-declaration]
     143 |         pci_walk_bus(bus, match_add_dports, &ctx);
         |         ^~~~~~~~~~~~
   drivers/cxl/core/pci.c: In function 'cxl_pci_get_latency':
   drivers/cxl/core/pci.c:1059:14: error: implicit declaration of function 'pcie_link_speed_mbps'; did you mean 'pcie_get_speed_cap'? [-Werror=implicit-function-declaration]
    1059 |         bw = pcie_link_speed_mbps(pdev);
         |              ^~~~~~~~~~~~~~~~~~~~
         |              pcie_get_speed_cap
   drivers/cxl/core/pci.c: In function 'cxl_gpf_get_dvsec':
>> drivers/cxl/core/pci.c:1149:17: error: implicit declaration of function 'pci_find_dvsec_capability'; did you mean 'pci_find_ext_capability'? [-Werror=implicit-function-declaration]
    1149 |         dvsec = pci_find_dvsec_capability(pdev, PCI_VENDOR_ID_CXL,
         |                 ^~~~~~~~~~~~~~~~~~~~~~~~~
         |                 pci_find_ext_capability

cc1: some warnings being treated as errors

Kconfig warnings: (for reference only)
WARNING: unmet direct dependencies detected for PCIEAER Depends on [n]: PCI [=n] && PCIEPORTBUS [=n]
Selected by [m]:
- ACPI_EXTLOG [=m] && ACPI [=y] && X86_MCE [=y] && X86_LOCAL_APIC [=y]
WARNING: unmet direct dependencies detected for CXL_BUS Depends on [n]: PCI [=n]
Selected by [m]:
- ACPI_EXTLOG [=m] && ACPI [=y] && X86_MCE [=y] && X86_LOCAL_APIC [=y]

vim +1149 drivers/cxl/core/pci.c

a52b6a2c1c997b Davidlohr Bueso 2025-01-24  1135  
36aace15d9bdcf Li Ming         2025-03-23  1136  u16 cxl_gpf_get_dvsec(struct device *dev)
021b7e42fa7bc2 Davidlohr Bueso 2025-02-20  1137  {
36aace15d9bdcf Li Ming         2025-03-23  1138  	struct pci_dev *pdev;
36aace15d9bdcf Li Ming         2025-03-23  1139  	bool is_port = true;
021b7e42fa7bc2 Davidlohr Bueso 2025-02-20  1140  	u16 dvsec;
021b7e42fa7bc2 Davidlohr Bueso 2025-02-20  1141  
021b7e42fa7bc2 Davidlohr Bueso 2025-02-20  1142  	if (!dev_is_pci(dev))
021b7e42fa7bc2 Davidlohr Bueso 2025-02-20  1143  		return 0;
021b7e42fa7bc2 Davidlohr Bueso 2025-02-20  1144  
36aace15d9bdcf Li Ming         2025-03-23  1145  	pdev = to_pci_dev(dev);
36aace15d9bdcf Li Ming         2025-03-23  1146  	if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ENDPOINT)
36aace15d9bdcf Li Ming         2025-03-23  1147  		is_port = false;
36aace15d9bdcf Li Ming         2025-03-23  1148  
36aace15d9bdcf Li Ming         2025-03-23 @1149  	dvsec = pci_find_dvsec_capability(pdev, PCI_VENDOR_ID_CXL,
021b7e42fa7bc2 Davidlohr Bueso 2025-02-20  1150  			is_port ? CXL_DVSEC_PORT_GPF : CXL_DVSEC_DEVICE_GPF);
021b7e42fa7bc2 Davidlohr Bueso 2025-02-20  1151  	if (!dvsec)
021b7e42fa7bc2 Davidlohr Bueso 2025-02-20  1152  		dev_warn(dev, "%s GPF DVSEC not present\n",
021b7e42fa7bc2 Davidlohr Bueso 2025-02-20  1153  			 is_port ? "Port" : "Device");
021b7e42fa7bc2 Davidlohr Bueso 2025-02-20  1154  	return dvsec;
021b7e42fa7bc2 Davidlohr Bueso 2025-02-20  1155  }
021b7e42fa7bc2 Davidlohr Bueso 2025-02-20  1156  EXPORT_SYMBOL_NS_GPL(cxl_gpf_get_dvsec, "CXL");

021b7e42fa7bc2 Davidlohr Bueso 2025-02-20 1157

Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
maintainer Reviewed-by on v7 6/6
#17 lore raw

Re: [PATCH 6/6 v7] ACPI: extlog: Trace CPER CXL Protocol Error Section

In reply to Fabio M. De Francesco
Quoted 10 lines · Fabio M. De Francesco

When Firmware First is enabled, BIOS handles errors first and then it makes them available to the kernel via the Common Platform Error Record (CPER) sections (UEFI 2.11 Appendix N.2.13). Linux parses the CPER sections via one of two similar paths, either ELOG or GHES. The errors managed by ELOG are signaled to the BIOS by the I/O Machine Check Architecture (I/O MCA).

Currently, ELOG and GHES show some inconsistencies in how they report to userspace via trace events.

Quoted 7 lines

Therefore, make the two mentioned paths act similarly by tracing the CPER CXL Protocol Error Section.

Quoted 97 lines
 drivers/acpi/Kconfig       |  1 +
 drivers/acpi/acpi_extlog.c | 22 ++++++++++++++++++++++
 drivers/cxl/core/ras.c     |  3 ++-
 include/cxl/event.h        |  2 ++
 4 files changed, 27 insertions(+), 1 deletion(-)
drivers/acpi/Kconfig +1 -0
index be02634f2320..c2ad24e77ddf 100644
@@ -498,6 +498,7 @@ config ACPI_EXTLOG
 	select ACPI_APEI
 	select ACPI_APEI_PCIEAER
 	select UEFI_CPER
+	select CXL_BUS
 	help
 	  Certain usages such as Predictive Failure Analysis (PFA) require
 	  more information about the error than what can be described in
drivers/acpi/acpi_extlog.c +22 -0
index b3976ceb4ee4..e6fb25395984 100644
@@ -12,6 +12,7 @@
 #include <linux/ratelimit.h>
 #include <linux/edac.h>
 #include <linux/ras.h>
+#include <cxl/event.h>
 #include <acpi/ghes.h>
 #include <asm/cpu.h>
 #include <asm/mce.h>
@@ -160,6 +161,21 @@ static void extlog_print_pcie(struct cper_sec_pcie *pcie_err,
 	pci_dev_put(pdev);
 }
 
+static void
+extlog_cxl_cper_handle_prot_err(struct cxl_cper_sec_prot_err *prot_err,
+				int severity)
+{
+	struct cxl_cper_prot_err_work_data wd;
+
+	if (cxl_cper_sec_prot_err_valid(prot_err))
+		return;
+
+	if (cxl_cper_setup_prot_err_work_data(&wd, prot_err, severity))
+		return;
+
+	cxl_cper_handle_prot_err(&wd);
+}
+
 static int extlog_print(struct notifier_block *nb, unsigned long val,
 			void *data)
 {
@@ -211,6 +227,12 @@ static int extlog_print(struct notifier_block *nb, unsigned long val,
 			if (gdata->error_data_length >= sizeof(*mem))
 				trace_extlog_mem_event(mem, err_seq, fru_id, fru_text,
 						       (u8)gdata->error_severity);
+		} else if (guid_equal(sec_type, &CPER_SEC_CXL_PROT_ERR)) {
+			struct cxl_cper_sec_prot_err *prot_err =
+				acpi_hest_get_payload(gdata);
+
+			extlog_cxl_cper_handle_prot_err(prot_err,
+							gdata->error_severity);
 		} else if (guid_equal(sec_type, &CPER_SEC_PCIE)) {
 			struct cper_sec_pcie *pcie_err = acpi_hest_get_payload(gdata);
 
drivers/cxl/core/ras.c +2 -1
index 2731ba3a0799..a90480d07c87 100644
@@ -63,7 +63,7 @@ static int match_memdev_by_parent(struct device *dev, const void *uport)
 	return 0;
 }
 
-static void cxl_cper_handle_prot_err(struct cxl_cper_prot_err_work_data *data)
+void cxl_cper_handle_prot_err(struct cxl_cper_prot_err_work_data *data)
 {
 	unsigned int devfn = PCI_DEVFN(data->prot_err.agent_addr.device,
 				       data->prot_err.agent_addr.function);
@@ -104,6 +104,7 @@ static void cxl_cper_handle_prot_err(struct cxl_cper_prot_err_work_data *data)
 	else
 		cxl_cper_trace_uncorr_prot_err(cxlmd, data->ras_cap);
 }
+EXPORT_SYMBOL_GPL(cxl_cper_handle_prot_err);
 
 static void cxl_cper_prot_err_work_fn(struct work_struct *work)
 {
include/cxl/event.h +2 -0
index 94081aec597a..ff97fea718d2 100644
@@ -340,4 +340,6 @@ cxl_cper_setup_prot_err_work_data(struct cxl_cper_prot_err_work_data *wd,
 }
 #endif
 
+void cxl_cper_handle_prot_err(struct cxl_cper_prot_err_work_data *wd);
+
 #endif /* _LINUX_CXL_EVENT_H */