ASoC: SDCA: support Q7.8 volume format
Subsystems (3)
PATCH v2 1/1 ASoC: SDCA: support Q7.8 volume format
From: Shuming Fan <[email protected]>
The SDCA specification uses Q7.8 volume format.
This patch adds a field to indicate whether it is SDCA volume control and supports the volume settings.
--- include/sound/soc.h | 1 + sound/soc/sdca/sdca_asoc.c | 34 ++++++--------------- sound/soc/soc-ops.c | 62 +++++++++++++++++++++++++++++++------- 3 files changed, 61 insertions(+), 36 deletions(-)
include/sound/soc.h +1 -0
@@ -1225,6 +1225,7 @@ struct soc_mixer_control {unsigned int sign_bit; unsigned int invert:1; unsigned int autodisable:1; + unsigned int sdca_q78:1;#ifdef CONFIG_SND_SOC_TOPOLOGY struct snd_soc_dobj dobj;#endif
sound/soc/sdca/sdca_asoc.c +9 -25
@@ -795,7 +795,6 @@ static int control_limit_kctl(struct device *dev,struct sdca_control_range *range;int min, max, step;unsigned int *tlv; -int shift;if (control->type !=SDCA_CTL_DATATYPE_Q7P8DB )return 0 ;
@@ -814,37 +813,22 @@ static int control_limit_kctl(struct device *dev, min =sign_extend32 (min, control->nbits -1 ); max =sign_extend32 (max, control->nbits -1 ); -/* -* FIXME: Only support power of 2 step sizes as this can be supported -* by a simple shift. -*/ -if (hweight32 (step) !=1 ) { -dev_err (dev,"%s: %s: currently unsupported step size\n" , - entity->label, control->label); -return -EINVAL ; - } - -/* -* The SDCA volumes are in steps of 1/256th of a dB, a step down of -* 64 (shift of 6) gives 1/4dB. 1/4dB is the smallest unit that is also -* representable in the ALSA TLVs which are in 1/100ths of a dB. -*/ - shift =max (ffs (step) -1 ,6 ); - tlv =devm_kcalloc (dev,4 ,sizeof (*tlv),GFP_KERNEL );if (!tlv)return -ENOMEM ; - tlv[0 ] =SNDRV_CTL_TLVT_DB_SCALE ; + tlv[0 ] =SNDRV_CTL_TLVT_DB_MINMAX ; tlv[1 ] =2 *sizeof (*tlv); tlv[2 ] = (min *100 ) >>8 ; - tlv[3 ] = ((1 << shift) *100 ) >>8 ; + tlv[3 ] = (max *100 ) >>8 ; + + step = (step *100 ) >>8 ; - mc->min = min >> shift; - mc->max = max >> shift; - mc->shift = shift; - mc->rshift = shift; - mc->sign_bit =15 - shift; + mc->min = ((int )tlv[2 ] / step); + mc->max = ((int )tlv[3 ] / step); + mc->shift = step; + mc->sign_bit =15 ; + mc->sdca_q78 =1 ; kctl->tlv.p = tlv; kctl->access |=SNDRV_CTL_ELEM_ACCESS_TLV_READ ;
sound/soc/soc-ops.c +51 -11
111 lines not on this page · raw message
Signature · 1 line
2.51.1
Quoted 8 lines · On Thu, Nov 06, 2025 at 05:33:35PM +0800, [email protected] wrote:
From: Shuming Fan <[email protected]>
The SDCA specification uses Q7.8 volume format.
This patch adds a field to indicate whether it is SDCA volume control and supports the volume settings.Signed-off-by Shuming Fan <[email protected]>---
Thanks for working on this it really makes the volume controls a lot better.
Thanks,
Charles
Mark Brown
maintainerQuoted 5 lines · On Thu, 06 Nov 2025 17:33:35 +0800, [email protected] wrote:
The SDCA specification uses Q7.8 volume format.
This patch adds a field to indicate whether it is SDCA volume control and supports the volume settings.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] ASoC: SDCA: support Q7.8 volume format
commit: 1b0f3f9ee41ee2bdd206667f85ea2aa36dfe6e69
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark