Skip to contentSkip to conversation

x86/alternative: Patch a single alternative location only once

PATCH Superseded Juergen Gross 2 participants 9 messages Nov 10, 2025 – Nov 18, 2025 x86

v3 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v3 cover x86/alternative: Patch a single alternative location only once

Instead of patching a single location potentially multiple times in case of nested ALTERNATIVE()s, do the patching only after having evaluated all alt_instr instances for that location.

Changes in V2:
- complete rework (Boris Petkov)

Changes in V3:
- split former V2 patch into 2 by introducing a helper function (Boris Petkov)
- repost the small cleanup patch 1 which was taken before, but has somehow vanished from the tip x86/alternative branch (it is still in the tip master branch, but I couldn't find it in any other tip branch).

Juergen Gross (3):
x86/alternative: Drop not needed test after call of alt_replace_call() x86/alternative: Use a helper function for patching alternatives x86/alternative: Patch a single alternative location only once

 arch/x86/kernel/alternative.c | 135 +++++++++++++++++++---------------
 1 file changed, 76 insertions(+), 59 deletions(-)
Signature · 1 line
2.51.0
#1 lore raw

PATCH v3 1/3 x86/alternative: Drop not needed test after call of alt_replace_call()

alt_replace_call() will never return a negative value, so testing the return value to be less than zero can be dropped.

This makes it possible to switch the return type of alt_replace_call() and the type of insn_buff_sz to unsigned int.

---
 arch/x86/kernel/alternative.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)
arch/x86/kernel/alternative.c +3 -6
index 8ee5ff547357..4f3ea50e41e8 100644
@@ -559,7 +559,7 @@ EXPORT_SYMBOL(BUG_func);
  * Rewrite the "call BUG_func" replacement to point to the target of the
  * indirect pv_ops call "call *disp(%ip)".
  */
-static int alt_replace_call(u8 *instr, u8 *insn_buff, struct alt_instr *a)
+static unsigned int alt_replace_call(u8 *instr, u8 *insn_buff, struct alt_instr *a)
 {
 	void *target, *bug = &BUG_func;
 	s32 disp;
@@ -643,7 +643,7 @@ void __init_or_module noinline apply_alternatives(struct alt_instr *start,
 	 * order.
 	 */
 	for (a = start; a < end; a++) {
-		int insn_buff_sz = 0;
+		unsigned int insn_buff_sz = 0;
 
 		/*
 		 * In case of nested ALTERNATIVE()s the outer alternative might
@@ -683,11 +683,8 @@ void __init_or_module noinline apply_alternatives(struct alt_instr *start,
 		memcpy(insn_buff, replacement, a->replacementlen);
 		insn_buff_sz = a->replacementlen;
 
-		if (a->flags & ALT_FLAG_DIRECT_CALL) {
+		if (a->flags & ALT_FLAG_DIRECT_CALL)
 			insn_buff_sz = alt_replace_call(instr, insn_buff, a);
-			if (insn_buff_sz < 0)
-				continue;
-		}
 
 		for (; insn_buff_sz < a->instrlen; insn_buff_sz++)
 			insn_buff[insn_buff_sz] = 0x90;
Signature · 1 line
2.51.0
#2 lore raw

PATCH v3 2/3 x86/alternative: Use a helper function for patching alternatives

In reply to Juergen Gross

Tidy up apply_alternatives() by moving the main patching action of a single alternative instance into a helper function.

As the original instruction is being patched with optimized padding NOPs even in case no replacement instruction has been selected, do the main patching action in the main loop. This requires to use __apply_relocation() instead of text_poke_apply_relocation() in order to have only a single call of optimize_nops(), resulting in a more transparent coding (the question why optimize_nops() isn't being called in all cases has come up more than once in the past).

---
V3:
- new patch

---
 arch/x86/kernel/alternative.c | 121 +++++++++++++++++++---------------
 1 file changed, 67 insertions(+), 54 deletions(-)
arch/x86/kernel/alternative.c +67 -54
index 4f3ea50e41e8..248e5f212a2b 100644
@@ -604,6 +604,68 @@ static inline u8 * instr_va(struct alt_instr *i)
 	return (u8 *)&i->instr_offset + i->instr_offset;
 }
 
+struct patch_site {
+	u8 *instr;
+	u8 buff[MAX_PATCH_LEN];
+	u8 len;
+};
+
+static void __init_or_module analyze_patch_site(struct patch_site *ps,
+						struct alt_instr *p, struct alt_instr *end)
+{
+	struct alt_instr *r;
+	u8 buff_sz;
+	u8 *repl;
+
+	/*
+	 * In case of nested ALTERNATIVE()s the outer alternative might add
+	 * more padding. To ensure consistent patching find the max padding for
+	 * all alt_instr entries for this site (nested alternatives result in
+	 * consecutive entries).
+	 */
+	ps->instr = instr_va(p);
+	ps->len = p->instrlen;
+	for (r = p+1; r < end && instr_va(r) == ps->instr; r++) {
+		ps->len = max(ps->len, r->instrlen);
+		p->instrlen = r->instrlen = ps->len;
+	}
+
+	BUG_ON(ps->len > sizeof(ps->buff));
+	BUG_ON(p->cpuid >= (NCAPINTS + NBUGINTS) * 32);
+
+	/*
+	 * Patch if either:
+	 * - feature is present
+	 * - feature not present but ALT_FLAG_NOT is set to mean,
+	 *   patch if feature is *NOT* present.
+	 */
+	if (!boot_cpu_has(p->cpuid) == !(p->flags & ALT_FLAG_NOT)) {
+		memcpy(ps->buff, ps->instr, ps->len);
+		return;
+	}
+
+	repl = (u8 *)&p->repl_offset + p->repl_offset;
+	DPRINTK(ALT, "feat: %d*32+%d, old: (%pS (%px) len: %d), repl: (%px, len: %d) flags: 0x%x",
+		p->cpuid >> 5, p->cpuid & 0x1f,
+		ps->instr, ps->instr, ps->len,
+		repl, p->replacementlen, p->flags);
+
+	memcpy(ps->buff, repl, p->replacementlen);
+	buff_sz = p->replacementlen;
+
+	if (p->flags & ALT_FLAG_DIRECT_CALL)
+		buff_sz = alt_replace_call(ps->instr, ps->buff, p);
+
+	for (; buff_sz < ps->len; buff_sz++)
+		ps->buff[buff_sz] = 0x90;
+
+	__apply_relocation(ps->buff, ps->instr, ps->len, repl, p->replacementlen);
+
+	DUMP_BYTES(ALT, ps->instr, ps->len, "%px:   old_insn: ", ps->instr);
+	DUMP_BYTES(ALT, repl, p->replacementlen, "%px:   rpl_insn: ", repl);
+	DUMP_BYTES(ALT, ps->buff, ps->len, "%px: final_insn: ", ps->instr);
+}
+
 /*
  * Replace instructions with better alternatives for this CPU type. This runs
  * before SMP is initialized to avoid SMP problems with self modifying code.
@@ -617,9 +679,7 @@ static inline u8 * instr_va(struct alt_instr *i)
 void __init_or_module noinline apply_alternatives(struct alt_instr *start,
 						  struct alt_instr *end)
 {
-	u8 insn_buff[MAX_PATCH_LEN];
-	u8 *instr, *replacement;
-	struct alt_instr *a, *b;
+	struct alt_instr *a;
 
 	DPRINTK(ALT, "alt table %px, -> %px", start, end);
 
@@ -643,59 +703,12 @@ void __init_or_module noinline apply_alternatives(struct alt_instr *start,
 	 * order.
 	 */
 	for (a = start; a < end; a++) {
-		unsigned int insn_buff_sz = 0;
-
-		/*
-		 * In case of nested ALTERNATIVE()s the outer alternative might
-		 * add more padding. To ensure consistent patching find the max
-		 * padding for all alt_instr entries for this site (nested
-		 * alternatives result in consecutive entries).
-		 */
-		for (b = a+1; b < end && instr_va(b) == instr_va(a); b++) {
-			u8 len = max(a->instrlen, b->instrlen);
-			a->instrlen = b->instrlen = len;
-		}
-
-		instr = instr_va(a);
-		replacement = (u8 *)&a->repl_offset + a->repl_offset;
-		BUG_ON(a->instrlen > sizeof(insn_buff));
-		BUG_ON(a->cpuid >= (NCAPINTS + NBUGINTS) * 32);
-
-		/*
-		 * Patch if either:
-		 * - feature is present
-		 * - feature not present but ALT_FLAG_NOT is set to mean,
-		 *   patch if feature is *NOT* present.
-		 */
-		if (!boot_cpu_has(a->cpuid) == !(a->flags & ALT_FLAG_NOT)) {
-			memcpy(insn_buff, instr, a->instrlen);
-			optimize_nops(instr, insn_buff, a->instrlen);
-			text_poke_early(instr, insn_buff, a->instrlen);
-			continue;
-		}
-
-		DPRINTK(ALT, "feat: %d*32+%d, old: (%pS (%px) len: %d), repl: (%px, len: %d) flags: 0x%x",
-			a->cpuid >> 5,
-			a->cpuid & 0x1f,
-			instr, instr, a->instrlen,
-			replacement, a->replacementlen, a->flags);
-
-		memcpy(insn_buff, replacement, a->replacementlen);
-		insn_buff_sz = a->replacementlen;
-
-		if (a->flags & ALT_FLAG_DIRECT_CALL)
-			insn_buff_sz = alt_replace_call(instr, insn_buff, a);
-
-		for (; insn_buff_sz < a->instrlen; insn_buff_sz++)
-			insn_buff[insn_buff_sz] = 0x90;
-
-		text_poke_apply_relocation(insn_buff, instr, a->instrlen, replacement, a->replacementlen);
+		struct patch_site ps;
 
-		DUMP_BYTES(ALT, instr, a->instrlen, "%px:   old_insn: ", instr);
-		DUMP_BYTES(ALT, replacement, a->replacementlen, "%px:   rpl_insn: ", replacement);
-		DUMP_BYTES(ALT, insn_buff, insn_buff_sz, "%px: final_insn: ", instr);
+		analyze_patch_site(&ps, a, end);
 
-		text_poke_early(instr, insn_buff, insn_buff_sz);
+		optimize_nops(ps.instr, ps.buff, ps.len);
+		text_poke_early(ps.instr, ps.buff, ps.len);
 	}
 
 	kasan_enable_current();
Signature · 1 line
2.51.0
maintainer
#3 lore raw

Re: [PATCH v3 2/3] x86/alternative: Use a helper function for patching alternatives

Quoted 45 lines · Juergen Gross
arch/x86/kernel/alternative.c +45 -0
+static void __init_or_module analyze_patch_site(struct patch_site *ps,
+						struct alt_instr *p, struct alt_instr *end)
+{
+	struct alt_instr *r;
+	u8 buff_sz;
+	u8 *repl;
+
+	/*
+	 * In case of nested ALTERNATIVE()s the outer alternative might add
+	 * more padding. To ensure consistent patching find the max padding for
+	 * all alt_instr entries for this site (nested alternatives result in
+	 * consecutive entries).
+	 */
+	ps->instr = instr_va(p);
+	ps->len = p->instrlen;
+	for (r = p+1; r < end && instr_va(r) == ps->instr; r++) {
+		ps->len = max(ps->len, r->instrlen);
+		p->instrlen = r->instrlen = ps->len;
+	}
+
+	BUG_ON(ps->len > sizeof(ps->buff));
+	BUG_ON(p->cpuid >= (NCAPINTS + NBUGINTS) * 32);
+
+	/*
+	 * Patch if either:
+	 * - feature is present
+	 * - feature not present but ALT_FLAG_NOT is set to mean,
+	 *   patch if feature is *NOT* present.
+	 */
+	if (!boot_cpu_has(p->cpuid) == !(p->flags & ALT_FLAG_NOT)) {
+		memcpy(ps->buff, ps->instr, ps->len);
+		return;
+	}
+
+	repl = (u8 *)&p->repl_offset + p->repl_offset;
+	DPRINTK(ALT, "feat: %d*32+%d, old: (%pS (%px) len: %d), repl: (%px, len: %d) flags: 0x%x",
+		p->cpuid >> 5, p->cpuid & 0x1f,
+		ps->instr, ps->instr, ps->len,
+		repl, p->replacementlen, p->flags);
+
+	memcpy(ps->buff, repl, p->replacementlen);
+	buff_sz = p->replacementlen;
+
+	if (p->flags & ALT_FLAG_DIRECT_CALL)
+		buff_sz = alt_replace_call(ps->instr, ps->buff, p);

arch/x86/kernel/alternative.c static inline u8 * instr_va(struct alt_instr *i) · line 667

Quoted 10 lines
arch/x86/kernel/alternative.c +10 -0
+
+	for (; buff_sz < ps->len; buff_sz++)
+		ps->buff[buff_sz] = 0x90;
+
+	__apply_relocation(ps->buff, ps->instr, ps->len, repl, p->replacementlen);
+
+	DUMP_BYTES(ALT, ps->instr, ps->len, "%px:   old_insn: ", ps->instr);
+	DUMP_BYTES(ALT, repl, p->replacementlen, "%px:   rpl_insn: ", repl);
+	DUMP_BYTES(ALT, ps->buff, ps->len, "%px: final_insn: ", ps->instr);
+}

Well, this doesn't quite look like what I suggested: if we have a function analyze_patch_site() then it should do only that - analyze the patch site *only* and not do the patching too.

With the point being that struct patch_site should carry the necessary information between an analyze step and a patching step so that you have simple functions doing one thing and one thing only - not mix up things.

And your 3rd patch is making things even worse again - simply in a different way.

So please take enough time to split the functionality:

1. one function does only patch sites analysis. Once it is done, the patch_site struct will contain *all* possible information for the next function:

2. patch site. This one takes the information gathered by the analysis phase and uses it to patch the site, fixup direct calls, apply relocations, dump debug info and so on.

Remember: the point here is to make the code simpler and understandable and manageable. Something that is sorely needed in that area before people start piling up more fancy shit.

But fancy shit will go in *only* after the code is clean and can take fancy shit naturally. Not dump it ontop and someone else will mop up after.

Thx.

Signature · 4 lines
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette
#4 lore raw

Re: [PATCH v3 2/3] x86/alternative: Use a helper function for patching alternatives

Quoted 52 lines · Borislav Petkov
Quoted 51 lines · Juergen Gross
arch/x86/kernel/alternative.c +51 -0
+static void __init_or_module analyze_patch_site(struct patch_site *ps,
+						struct alt_instr *p, struct alt_instr *end)
+{
+	struct alt_instr *r;
+	u8 buff_sz;
+	u8 *repl;
+
+	/*
+	 * In case of nested ALTERNATIVE()s the outer alternative might add
+	 * more padding. To ensure consistent patching find the max padding for
+	 * all alt_instr entries for this site (nested alternatives result in
+	 * consecutive entries).
+	 */
+	ps->instr = instr_va(p);
+	ps->len = p->instrlen;
+	for (r = p+1; r < end && instr_va(r) == ps->instr; r++) {
+		ps->len = max(ps->len, r->instrlen);
+		p->instrlen = r->instrlen = ps->len;
+	}
+
+	BUG_ON(ps->len > sizeof(ps->buff));
+	BUG_ON(p->cpuid >= (NCAPINTS + NBUGINTS) * 32);
+
+	/*
+	 * Patch if either:
+	 * - feature is present
+	 * - feature not present but ALT_FLAG_NOT is set to mean,
+	 *   patch if feature is *NOT* present.
+	 */
+	if (!boot_cpu_has(p->cpuid) == !(p->flags & ALT_FLAG_NOT)) {
+		memcpy(ps->buff, ps->instr, ps->len);
+		return;
+	}
+
+	repl = (u8 *)&p->repl_offset + p->repl_offset;
+	DPRINTK(ALT, "feat: %d*32+%d, old: (%pS (%px) len: %d), repl: (%px, len: %d) flags: 0x%x",
+		p->cpuid >> 5, p->cpuid & 0x1f,
+		ps->instr, ps->instr, ps->len,
+		repl, p->replacementlen, p->flags);
+
+	memcpy(ps->buff, repl, p->replacementlen);
+	buff_sz = p->replacementlen;
+
+	if (p->flags & ALT_FLAG_DIRECT_CALL)
+		buff_sz = alt_replace_call(ps->instr, ps->buff, p);
+
+	for (; buff_sz < ps->len; buff_sz++)
+		ps->buff[buff_sz] = 0x90;
+
+	__apply_relocation(ps->buff, ps->instr, ps->len, repl, p->replacementlen);
+
Quoted 8 lines

arch/x86/kernel/alternative.c static inline u8 * instr_va(struct alt_instr *i) · line 667

Quoted 4 lines
arch/x86/kernel/alternative.c +4 -0
+	DUMP_BYTES(ALT, ps->instr, ps->len, "%px:   old_insn: ", ps->instr);
+	DUMP_BYTES(ALT, repl, p->replacementlen, "%px:   rpl_insn: ", repl);
+	DUMP_BYTES(ALT, ps->buff, ps->len, "%px: final_insn: ", ps->instr);
+}

Well, this doesn't quite look like what I suggested: if we have a function analyze_patch_site() then it should do only that - analyze the patch site *only* and not do the patching too.

It doesn't do the patching. That is done in the caller of analyze_patch_site().

What it does do is looking at one patch site and putting the code to be patched in into the temporary buffer and then it is printing the debug info related to the result of the analysis.

Quoted 6 lines

With the point being that struct patch_site should carry the necessary information between an analyze step and a patching step so that you have simple functions doing one thing and one thing only - not mix up things.

And your 3rd patch is making things even worse again - simply in a different way.

It is following the same direction:

- analyze the patch site (now all of the alternatives for one location)
- putting the code to be patched into the buffer
- print the debug info related to that patch site

Quoted 10 lines

So please take enough time to split the functionality:

1. one function does only patch sites analysis. Once it is done, the patch_site struct will contain *all* possible information for the next function:

2. patch site. This one takes the information gathered by the analysis phase and uses it to patch the site, fixup direct calls, apply relocations, dump debug info and so on.

The reason I was doing that way was to _really_ have the patching done only once. This includes the case when the original instruction is kept and just the nops are being optimized.

I can add one other layer doing the split you are asking for: one for gathering the information and one for applying relocs and debug printing. But I'd really like to keep the final patching in apply_alternatives(), as this makes it very clear where the final patching of the code is done.

Juergen

maintainer
#5 lore raw

Re: [PATCH v3 2/3] x86/alternative: Use a helper function for patching alternatives

Quoted 2 lines · Jürgen Groß

It doesn't do the patching. That is done in the caller of analyze_patch_site().

It doesn't do patch site analysis only either.

Quoted 2 lines

and putting the code to be patched in into the temporary buffer and then it is printing the debug info related to the result of the analysis.

This belongs more into the patch_site function, I'd say.

Quoted 4 lines

I can add one other layer doing the split you are asking for: one for gathering the information and one for applying relocs and debug printing. But I'd really like to keep the final patching in apply_alternatives(), as this makes it very clear where the final patching of the code is done.

Fine by me. And I'd like to have clearly separated stages with functions named accordingly and functions doing *only* one thing and one thing only.

I'm even more fine if you do:

	analyze_patch_site();
	prep_patch_site();
	patch_site();

and have it perfectly clear and separated and borderline trivial.

Thx.

Signature · 4 lines
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette
#6 lore raw

PATCH v3 3/3 x86/alternative: Patch a single alternative location only once

In reply to Juergen Gross

Instead of patching a single location potentially multiple times in case of nested ALTERNATIVE()s, do the patching only after having evaluated all alt_instr instances for that location.

This has multiple advantages:

- In case of replacing an indirect with a direct call using the ALT_FLAG_DIRECT_CALL flag, there is no longer the need to have that instance before any other instances at the same location (the original instruction is needed for finding the target of the direct call).
This issue has been hit when trying to do paravirt patching similar to the following:
ALTERNATIVE_2(PARAVIRT_CALL, // indirect call
instr, feature, // native instruction
ALT_CALL_INSTR, X86_FEATURE_XENPV) // Xen function
In case "feature" was true, "instr" replaced the indirect call. Under Xen PV the patching to have a direct call failed, as the original indirect call was no longer there to find the call target.

- In case of nested ALTERNATIVE()s there is no intermediate replacement visible. This avoids any problems in case e.g. an interrupt is happening between the single instances and the patched location is used during handling the interrupt.

---
V2:
- complete rework (Boris Petkov)
V3:
- rebase to added patch 2

---
 arch/x86/kernel/alternative.c | 59 ++++++++++++++++++++---------------
 1 file changed, 33 insertions(+), 26 deletions(-)
arch/x86/kernel/alternative.c +33 -26
index 248e5f212a2b..1d8dbf5521e9 100644
@@ -610,10 +610,10 @@ struct patch_site {
 	u8 len;
 };
 
-static void __init_or_module analyze_patch_site(struct patch_site *ps,
-						struct alt_instr *p, struct alt_instr *end)
+static struct alt_instr * __init_or_module analyze_patch_site(
+	struct patch_site *ps, struct alt_instr *p, struct alt_instr *end)
 {
-	struct alt_instr *r;
+	struct alt_instr *r = NULL;
 	u8 buff_sz;
 	u8 *repl;
 
@@ -622,48 +622,54 @@ static void __init_or_module analyze_patch_site(struct patch_site *ps,
 	 * more padding. To ensure consistent patching find the max padding for
 	 * all alt_instr entries for this site (nested alternatives result in
 	 * consecutive entries).
+	 * Find the last alt_instr eligible for patching at the site.
 	 */
 	ps->instr = instr_va(p);
-	ps->len = p->instrlen;
-	for (r = p+1; r < end && instr_va(r) == ps->instr; r++) {
-		ps->len = max(ps->len, r->instrlen);
-		p->instrlen = r->instrlen = ps->len;
+	ps->len = 0;
+	for (; p < end && instr_va(p) == ps->instr; p++) {
+		ps->len = max(ps->len, p->instrlen);
+
+		BUG_ON(p->cpuid >= (NCAPINTS + NBUGINTS) * 32);
+		/*
+		 * Patch if either:
+		 * - feature is present
+		 * - feature not present but ALT_FLAG_NOT is set to mean,
+		 *   patch if feature is *NOT* present.
+		 */
+		if (!boot_cpu_has(p->cpuid) != !(p->flags & ALT_FLAG_NOT))
+			r = p;
 	}
 
 	BUG_ON(ps->len > sizeof(ps->buff));
-	BUG_ON(p->cpuid >= (NCAPINTS + NBUGINTS) * 32);
 
-	/*
-	 * Patch if either:
-	 * - feature is present
-	 * - feature not present but ALT_FLAG_NOT is set to mean,
-	 *   patch if feature is *NOT* present.
-	 */
-	if (!boot_cpu_has(p->cpuid) == !(p->flags & ALT_FLAG_NOT)) {
+	if (!r) {
+		/* Nothing to patch, use original instruction. */
 		memcpy(ps->buff, ps->instr, ps->len);
-		return;
+		return p;
 	}
 
-	repl = (u8 *)&p->repl_offset + p->repl_offset;
+	repl = (u8 *)&r->repl_offset + r->repl_offset;
 	DPRINTK(ALT, "feat: %d*32+%d, old: (%pS (%px) len: %d), repl: (%px, len: %d) flags: 0x%x",
-		p->cpuid >> 5, p->cpuid & 0x1f,
+		r->cpuid >> 5, r->cpuid & 0x1f,
 		ps->instr, ps->instr, ps->len,
-		repl, p->replacementlen, p->flags);
+		repl, r->replacementlen, r->flags);
 
-	memcpy(ps->buff, repl, p->replacementlen);
-	buff_sz = p->replacementlen;
+	memcpy(ps->buff, repl, r->replacementlen);
+	buff_sz = r->replacementlen;
 
-	if (p->flags & ALT_FLAG_DIRECT_CALL)
-		buff_sz = alt_replace_call(ps->instr, ps->buff, p);
+	if (r->flags & ALT_FLAG_DIRECT_CALL)
+		buff_sz = alt_replace_call(ps->instr, ps->buff, r);
 
 	for (; buff_sz < ps->len; buff_sz++)
 		ps->buff[buff_sz] = 0x90;
 
-	__apply_relocation(ps->buff, ps->instr, ps->len, repl, p->replacementlen);
+	__apply_relocation(ps->buff, ps->instr, ps->len, repl, r->replacementlen);
 
 	DUMP_BYTES(ALT, ps->instr, ps->len, "%px:   old_insn: ", ps->instr);
 	DUMP_BYTES(ALT, repl, p->replacementlen, "%px:   rpl_insn: ", repl);
 	DUMP_BYTES(ALT, ps->buff, ps->len, "%px: final_insn: ", ps->instr);
+
+	return p;
 }
 
 /*
@@ -702,10 +708,11 @@ void __init_or_module noinline apply_alternatives(struct alt_instr *start,
 	 * So be careful if you want to change the scan order to any other
 	 * order.
 	 */
-	for (a = start; a < end; a++) {
+	a = start;
+	while (a < end) {
 		struct patch_site ps;
 
-		analyze_patch_site(&ps, a, end);
+		a = analyze_patch_site(&ps, a, end);
 
 		optimize_nops(ps.instr, ps.buff, ps.len);
 		text_poke_early(ps.instr, ps.buff, ps.len);
Signature · 1 line
2.51.0
maintainer
#7 lore raw
In reply to Juergen Gross
Quoted 5 lines · Juergen Gross

Changes in V3:
- split former V2 patch into 2 by introducing a helper function (Boris Petkov)
- repost the small cleanup patch 1 which was taken before, but has somehow vanished from the tip x86/alternative branch (it is still in the tip master branch, but I couldn't find it in any other tip branch).

You mean this one?

https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/commit/?h=x86/core&id=ad74016b919cbad78d203fa1c459ae18e73ce586

Signature · 4 lines
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette
#8 lore raw
Quoted 11 lines · Borislav Petkov
Quoted 5 lines · Juergen Gross

Changes in V3:
- split former V2 patch into 2 by introducing a helper function (Boris Petkov)
- repost the small cleanup patch 1 which was taken before, but has somehow vanished from the tip x86/alternative branch (it is still in the tip master branch, but I couldn't find it in any other tip branch).

You mean this one?

https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/commit/?h=x86/core&id=ad74016b919cbad78d203fa1c459ae18e73ce586

Yes.

Juergen