mtd: spinand: add support for FudanMicro FM25S01BI3
Subsystems (2)
PATCH v2 1/1 mtd: spinand: add support for FudanMicro FM25S01BI3
Add support for FudanMicro FM25S01BI3 SPI NAND.
Signed-off-by Mikhail Zhilkin <[email protected]>
---
Changes in v2:
- Rebase with nand/next
--- drivers/mtd/nand/spi/fmsh.c | 72 +++++++++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+)
drivers/mtd/nand/spi/fmsh.c +72 -0
@@ -9,6 +9,13 @@#include <linux/kernel.h> #include <linux/mtd/spinand.h> +#define FM25S01BI3_STATUS_ECC_MASK (7 << 4) +#define FM25S01BI3_STATUS_ECC_NO_BITFLIPS (0 << 4) +#define FM25S01BI3_STATUS_ECC_1_3_BITFLIPS (1 << 4) +#define FM25S01BI3_STATUS_ECC_UNCOR_ERROR (2 << 4) +#define FM25S01BI3_STATUS_ECC_4_6_BITFLIPS (3 << 4) +#define FM25S01BI3_STATUS_ECC_7_8_BITFLIPS (5 << 4) +#define SPINAND_MFR_FMSH 0xA1 static SPINAND_OP_VARIANTS(read_cache_variants,
@@ -45,11 +52,66 @@ static int fm25s01a_ooblayout_free(struct mtd_info *mtd, int section,return 0 ; } +static int fm25s01bi3_ecc_get_status (struct spinand_device *spinand, +u8 status) +{ +switch (status &FM25S01BI3_STATUS_ECC_MASK ) { +case FM25S01BI3_STATUS_ECC_NO_BITFLIPS : +return 0 ; + +case FM25S01BI3_STATUS_ECC_UNCOR_ERROR : +return -EBADMSG ; + +case FM25S01BI3_STATUS_ECC_1_3_BITFLIPS : +return 3 ; + +case FM25S01BI3_STATUS_ECC_4_6_BITFLIPS : +return 6 ; + +case FM25S01BI3_STATUS_ECC_7_8_BITFLIPS : +return 8 ; + +default : +break ; + } + +return -EINVAL ; +} + +static int fm25s01bi3_ooblayout_ecc (struct mtd_info *mtd,int section, +struct mtd_oob_region *region) +{ +if (section) +return -ERANGE ; + + region->offset =64 ; + region->length =64 ; + +return 0 ; +} + +static int fm25s01bi3_ooblayout_free (struct mtd_info *mtd,int section, +struct mtd_oob_region *region) +{ +if (section >3 ) +return -ERANGE ; + + region->offset = (16 * section) +4 ; + region->length =12 ; + +return 0 ; +} +static const struct mtd_ooblayout_ops fm25s01a_ooblayout = { .ecc = fm25s01a_ooblayout_ecc, .free = fm25s01a_ooblayout_free, }; +static const struct mtd_ooblayout_ops fm25s01bi3_ooblayout = { + .ecc = fm25s01bi3_ooblayout_ecc, + .free = fm25s01bi3_ooblayout_free, +}; +static const struct spinand_info fmsh_spinand_table[] = { SPINAND_INFO("FM25S01A", SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xE4),
@@ -60,6 +122,16 @@ static const struct spinand_info fmsh_spinand_table[] = { &update_cache_variants), SPINAND_HAS_QE_BIT, SPINAND_ECCINFO(&fm25s01a_ooblayout, NULL)), +SPINAND_INFO ("FM25S01BI3" , +SPINAND_ID (SPINAND_READID_METHOD_OPCODE_DUMMY ,0xd4 ), +NAND_MEMORG (1 ,2048 ,128 ,64 ,1024 ,20 ,1 ,1 ,1 ), +NAND_ECCREQ (8 ,512 ), +SPINAND_INFO_OP_VARIANTS (&read_cache_variants, + &write_cache_variants, + &update_cache_variants), +SPINAND_HAS_QE_BIT , +SPINAND_ECCINFO (&fm25s01bi3_ooblayout, + fm25s01bi3_ecc_get_status)), }; static const struct spinand_manufacturer_ops fmsh_spinand_manuf_ops = {
Signature · 1 line
2.40.1
Quoted 5 lines · Mikhail Zhilkin
Add support for FudanMicro FM25S01BI3 SPI NAND.
Applied to nand/next, thanks!
[1/1] mtd: spinand: add support for FudanMicro FM25S01BI3
commit: f6dffe2a9ed1bdcee1879e2728310fb1e08602cf
Patche(s) should be available on mtd/linux.git and will be part of the next PR (provided that no robot complains by then).
Kind regards,
Miquèl