tracing: Some last minute fixes

index 04307a19cde3..3690221ba3d8 100644
@@ -138,6 +138,7 @@ enum trace_iter_flags {
 	TRACE_FILE_LAT_FMT	= 1,
 	TRACE_FILE_ANNOTATE	= 2,
 	TRACE_FILE_TIME_IN_NS	= 4,
+	TRACE_FILE_PAUSE	= 8,
 };
 
 

index 65ac0f04a946..cc48d16be43e 100644
@@ -163,7 +163,7 @@ enum {
 #define RET_STACK(t, offset) ((struct ftrace_ret_stack *)(&(t)->ret_stack[offset]))
 
 /*
- * Each fgraph_ops has a reservered unsigned long at the end (top) of the
+ * Each fgraph_ops has a reserved unsigned long at the end (top) of the
  * ret_stack to store task specific state.
  */
 #define SHADOW_STACK_TASK_VARS(ret_stack) \

index 5a807d62e76d..10ae831f2710 100644
@@ -29,7 +29,7 @@
  * fprobe_table: hold 'fprobe_hlist::hlist' for checking the fprobe still
  *   exists. The key is the address of fprobe instance.
  * fprobe_ip_table: hold 'fprobe_hlist::array[*]' for searching the fprobe
- *   instance related to the funciton address. The key is the ftrace IP
+ *   instance related to the function address. The key is the ftrace IP
  *   address.
  *
  * When unregistering the fprobe, fprobe_hlist::fp and fprobe_hlist::array[*].fp

index 8688c88534de..41c9f5d079be 100644
@@ -1770,7 +1770,7 @@ static bool rb_meta_init(struct trace_buffer *buffer, int scratch_size)
 	bmeta->total_size = total_size;
 	bmeta->buffers_offset = (void *)ptr - (void *)bmeta;
 
-	/* Zero out the scatch pad */
+	/* Zero out the scratch pad */
 	memset((void *)bmeta + sizeof(*bmeta), 0, bmeta->buffers_offset - sizeof(*bmeta));
 
 	return false;

@@ -6089,7 +6089,7 @@ static void rb_clear_buffer_page(struct buffer_page *page)
  * id field, and updated via this function.
  *
  * But for a fixed memory mapped buffer, the id is already assigned for
- * fixed memory ording in the memory layout and can not be used. Instead
+ * fixed memory ordering in the memory layout and can not be used. Instead
  * the index of where the page lies in the memory layout is used.
  *
  * For the normal pages, set the buffer page id with the passed in @id

@@ -7669,7 +7669,7 @@ static __init int test_ringbuffer(void)
 	/*
 	 * Show buffer is enabled before setting rb_test_started.
 	 * Yes there's a small race window where events could be
-	 * dropped and the thread wont catch it. But when a ring
+	 * dropped and the thread won't catch it. But when a ring
 	 * buffer gets enabled, there will always be some kind of
 	 * delay before other CPUs see it. Thus, we don't care about
 	 * those dropped events. We care about events dropped after

index cdc3aea12c93..593e3b59e42e 100644
@@ -433,7 +433,7 @@ static int __init ring_buffer_benchmark_init(void)
 {
 	int ret;
 
-	/* make a one meg buffer in overwite mode */
+	/* make a one meg buffer in overwrite mode */
 	buffer = ring_buffer_alloc(1000000, RB_FL_OVERWRITE);
 	if (!buffer)
 		return -ENOMEM;

index c9fbb316dcbd..e575956ef9b5 100644
@@ -125,7 +125,7 @@ cpumask_var_t __read_mostly	tracing_buffer_mask;
  * If there is an oops (or kernel panic) and the ftrace_dump_on_oops
  * is set, then ftrace_dump is called. This will output the contents
  * of the ftrace buffers to the console.  This is very useful for
- * capturing traces that lead to crashes and outputing it to a
+ * capturing traces that lead to crashes and outputting it to a
  * serial console.
  *
  * It is default off, but you can enable it with either specifying

@@ -134,7 +134,7 @@ cpumask_var_t __read_mostly	tracing_buffer_mask;
  * Set 1 if you want to dump buffers of all CPUs
  * Set 2 if you want to dump the buffer of the CPU that triggered oops
  * Set instance name if you want to dump the specific trace instance
- * Multiple instance dump is also supported, and instances are seperated
+ * Multiple instance dump is also supported, and instances are separated
  * by commas.
  */
 /* Set to string format zero to disable by default */

@@ -4709,8 +4709,10 @@ __tracing_open(struct inode *inode, struct file *file, bool snapshot)
 	 * If pause-on-trace is enabled, then stop the trace while
 	 * dumping, unless this is the "snapshot" file
 	 */
-	if (!iter->snapshot && (tr->trace_flags & TRACE_ITER(PAUSE_ON_TRACE)))
+	if (!iter->snapshot && (tr->trace_flags & TRACE_ITER(PAUSE_ON_TRACE))) {
+		iter->iter_flags |= TRACE_FILE_PAUSE;
 		tracing_stop_tr(tr);
+	}
 
 	if (iter->cpu_file == RING_BUFFER_ALL_CPUS) {
 		for_each_tracing_cpu(cpu) {

@@ -4842,7 +4844,7 @@ static int tracing_release(struct inode *inode, struct file *file)
 	if (iter->trace && iter->trace->close)
 		iter->trace->close(iter);
 
-	if (!iter->snapshot && tr->stop_count)
+	if (iter->iter_flags & TRACE_FILE_PAUSE)
 		/* reenable tracing if it was previously enabled */
 		tracing_start_tr(tr);
 

@@ -5276,7 +5278,7 @@ int set_tracer_flag(struct trace_array *tr, u64 mask, int enabled)
 				return -EINVAL;
 			/*
 			 * An instance must always have it set.
-			 * by default, that's the global_trace instane.
+			 * by default, that's the global_trace instance.
 			 */
 			if (printk_trace == tr)
 				update_printk_trace(&global_trace);

@@ -7554,7 +7556,7 @@ char *trace_user_fault_read(struct trace_user_buf_info *tinfo,
 		migrate_disable();
 
 		/*
-		 * Now preemption is being enabed and another task can come in
+		 * Now preemption is being enabled and another task can come in
 		 * and use the same buffer and corrupt our data.
 		 */
 		preempt_enable_notrace();

@@ -11329,7 +11331,7 @@ __init static void do_allocate_snapshot(const char *name)
 	/*
 	 * When allocate_snapshot is set, the next call to
 	 * allocate_trace_buffers() (called by trace_array_get_by_name())
-	 * will allocate the snapshot buffer. That will alse clear
+	 * will allocate the snapshot buffer. That will also clear
 	 * this flag.
 	 */
 	allocate_snapshot = true;

index 9b07ad9eb284..b16a5a158040 100644
@@ -360,7 +360,7 @@ static bool process_string(const char *fmt, int len, struct trace_event_call *ca
 			/* Anything else, this isn't a function */
 			break;
 		}
-		/* A function could be wrapped in parethesis, try the next one */
+		/* A function could be wrapped in parenthesis, try the next one */
 		s = r + 1;
 	} while (s < e);
 

@@ -567,7 +567,7 @@ static void test_event_printk(struct trace_event_call *call)
 			 * If start_arg is zero, then this is the start of the
 			 * first argument. The processing of the argument happens
 			 * when the end of the argument is found, as it needs to
-			 * handle paranthesis and such.
+			 * handle parenthesis and such.
 			 */
 			if (!start_arg) {
 				start_arg = i;

@@ -785,7 +785,7 @@ static int __ftrace_event_enable_disable(struct trace_event_file *file,
 		 *
 		 * When soft_disable is not set but the soft_mode is,
 		 * we do nothing. Do not disable the tracepoint, otherwise
-		 * "soft enable"s (clearing the SOFT_DISABLED bit) wont work.
+		 * "soft enable"s (clearing the SOFT_DISABLED bit) won't work.
 		 */
 		if (soft_disable) {
 			if (atomic_dec_return(&file->sm_ref) > 0)

@@ -1394,7 +1394,7 @@ int ftrace_set_clr_event(struct trace_array *tr, char *buf, int set)
 	if (!tr)
 		return -ENOENT;
 
-	/* Modules events can be appened with :mod:<module> */
+	/* Modules events can be appended with :mod:<module> */
 	mod = strstr(buf, ":mod:");
 	if (mod) {
 		*mod = '\0';

index 54226b48b2d1..385af8405392 100644
@@ -142,7 +142,7 @@ static bool is_not(const char *str)
 }
 
 /**
- * struct prog_entry - a singe entry in the filter program
+ * struct prog_entry - a single entry in the filter program
  * @target:	     Index to jump to on a branch (actually one minus the index)
  * @when_to_branch:  The value of the result of the predicate to do a branch
  * @pred:	     The predicate to execute.

index 289bdea98776..5e6e70540eef 100644
@@ -5283,7 +5283,7 @@ hist_trigger_actions(struct hist_trigger_data *hist_data,
  * on the stack, so when the histogram trigger is initialized
  * a percpu array of 4 hist_pad structures is allocated.
  * This will cover every context from normal, softirq, irq and NMI
- * in the very unlikely event that a tigger happens at each of
+ * in the very unlikely event that a trigger happens at each of
  * these contexts and interrupts a currently active trigger.
  */
 struct hist_pad {

index 2f19bbe73d27..4554c458b78c 100644
@@ -375,7 +375,6 @@ static enum print_line_t print_synth_event(struct trace_iterator *iter,
 				n_u64++;
 			} else {
 				trace_seq_printf(s, print_fmt, se->fields[i]->name,
-						 STR_VAR_LEN_MAX,
 						 (char *)&entry->fields[n_u64].as_u64,
 						 i == se->n_fields - 1 ? "" : " ");
 				n_u64 += STR_VAR_LEN_MAX / sizeof(u64);

index 96aad82b1628..06b75bcfc7b8 100644
@@ -732,7 +732,7 @@ static void unregister_trigger(char *glob,
  *   param             - text following cmd and ':' and stripped of filter
  *   filter            - the optional filter text following (and including) 'if'
  *
- * To illustrate the use of these componenents, here are some concrete
+ * To illustrate the use of these components, here are some concrete
  * examples. For the following triggers:
  *
  *   echo 'traceon:5 if pid == 0' > trigger

index b15854c75d4f..dca6e50b3b21 100644
@@ -1041,7 +1041,7 @@ static int user_field_array_size(const char *type)
 
 static int user_field_size(const char *type)
 {
-	/* long is not allowed from a user, since it's ambigious in size */
+	/* long is not allowed from a user, since it's ambiguous in size */
 	if (strcmp(type, "s64") == 0)
 		return sizeof(s64);
 	if (strcmp(type, "u64") == 0)

@@ -1079,7 +1079,7 @@ static int user_field_size(const char *type)
 	if (str_has_prefix(type, "__rel_loc "))
 		return sizeof(u32);
 
-	/* Uknown basic type, error */
+	/* Unknown basic type, error */
 	return -EINVAL;
 }
 

@@ -2465,7 +2465,7 @@ static long user_events_ioctl_reg(struct user_event_file_info *info,
 	/*
 	 * Prevent users from using the same address and bit multiple times
 	 * within the same mm address space. This can cause unexpected behavior
-	 * for user processes that is far easier to debug if this is explictly
+	 * for user processes that is far easier to debug if this is explicitly
 	 * an error upon registering.
 	 */
 	if (current_user_event_enabler_exists((unsigned long)reg.enable_addr,

index a9962d4497e8..827104d00bc0 100644
@@ -329,7 +329,7 @@ static struct osnoise_data {
 	u64	print_stack;		/* print IRQ stack if total > */
 	int	timerlat_tracer;	/* timerlat tracer */
 #endif
-	bool	tainted;		/* infor users and developers about a problem */
+	bool	tainted;		/* info users and developers about a problem */
 } osnoise_data = {
 	.sample_period			= DEFAULT_SAMPLE_PERIOD,
 	.sample_runtime			= DEFAULT_SAMPLE_RUNTIME,

@@ -738,7 +738,7 @@ cond_move_thread_delta_start(struct osnoise_variables *osn_var, u64 duration)
 /*
  * get_int_safe_duration - Get the duration of a window
  *
- * The irq, softirq and thread varaibles need to have its duration without
+ * The irq, softirq and thread variables need to have its duration without
  * the interference from higher priority interrupts. Instead of keeping a
  * variable to discount the interrupt interference from these variables, the
  * starting time of these variables are pushed forward with the interrupt's

@@ -1460,7 +1460,7 @@ static int run_osnoise(void)
 	stop_in = osnoise_data.stop_tracing * NSEC_PER_USEC;
 
 	/*
-	 * Start timestemp
+	 * Start timestamp
 	 */
 	start = time_get();
 

@@ -1881,7 +1881,7 @@ static int timerlat_main(void *data)
 	tlat->kthread = current;
 	osn_var->pid = current->pid;
 	/*
-	 * Anotate the arrival time.
+	 * Annotate the arrival time.
 	 */
 	tlat->abs_period = hrtimer_cb_get_time(&tlat->timer);
 

@@ -1978,7 +1978,7 @@ static void stop_per_cpu_kthreads(void)
 }
 
 /*
- * start_kthread - Start a workload tread
+ * start_kthread - Start a workload thread
  */
 static int start_kthread(unsigned int cpu)
 {

@@ -2705,7 +2705,7 @@ static int osnoise_create_cpu_timerlat_fd(struct dentry *top_dir)
 	 * Why not using tracing instance per_cpu/ dir?
 	 *
 	 * Because osnoise/timerlat have a single workload, having
-	 * multiple files like these are wast of memory.
+	 * multiple files like these are waste of memory.
 	 */
 	per_cpu = tracefs_create_dir("per_cpu", top_dir);
 	if (!per_cpu)

index 5cbdc423afeb..abf7cf2b6b65 100644
@@ -516,7 +516,7 @@ static void clear_btf_context(struct traceprobe_parse_context *ctx)
 	}
 }
 
-/* Return 1 if the field separater is arrow operator ('->') */
+/* Return 1 if the field separator is arrow operator ('->') */
 static int split_next_field(char *varname, char **next_field,
 			    struct traceprobe_parse_context *ctx)
 {

index c158d65a8a88..32684ef4fb9d 100644
@@ -15,7 +15,7 @@
  * 
  * A write to the buffer will either succeed or fail. That is, unlike
  * sprintf() there will not be a partial write (well it may write into
- * the buffer but it wont update the pointers). This allows users to
+ * the buffer but it won't update the pointers). This allows users to
  * try to write something into the trace_seq buffer and if it fails
  * they can flush it and try again.
  *