arm64: dts: sprd: Use recommended node names
Subsystems (2)
Rob Herring (Arm)
maintainerPATCH 1/1 arm64: dts: sprd: Use recommended node names
Update Spreadtrum platforms node name to the recommended standard node names. Generally, node names and paths aren't considered ABI, so it is safe to change them.
Signed-off-by Rob Herring (Arm) <[email protected]>
---
SoC maintainers, Please take this directly.
arch/arm64/boot/dts/sprd/sc9860.dtsi | 7 ++++--- arch/arm64/boot/dts/sprd/sc9863a.dtsi | 4 ++-- arch/arm64/boot/dts/sprd/sharkl64.dtsi | 2 +- arch/arm64/boot/dts/sprd/whale2.dtsi | 8 ++++---- 4 files changed, 11 insertions(+), 10 deletions(-)
arch/arm64/boot/dts/sprd/sc9860.dtsi +4 -3
@@ -115,7 +115,7 @@ CPU7: cpu@530103 { idle-states { entry-method = "psci"; - CORE_PD: core_pd { + CORE_PD: cpu-pd { compatible = "arm,idle-state"; entry-latency-us = <1000>; exit-latency-us = <700>;
@@ -124,7 +124,7 @@ CORE_PD: core_pd { arm,psci-suspend-param = <0x00010002>; }; - CLUSTER_PD: cluster_pd { + CLUSTER_PD: cluster-pd { compatible = "arm,idle-state"; entry-latency-us = <1000>; exit-latency-us = <1000>;
@@ -276,7 +276,8 @@ etb@10003000 { reg = <0 0x10003000 0 0x1000>; clocks = <&ext_26m>; clock-names = "apb_pclk"; - out-ports { + + in-ports { port { etb_in: endpoint { remote-endpoint =
arch/arm64/boot/dts/sprd/sc9863a.dtsi +2 -2
@@ -110,7 +110,7 @@ CPU7: cpu@700 { idle-states { entry-method = "psci"; - CORE_PD: core-pd { + CORE_PD: cpu-pd { compatible = "arm,idle-state"; entry-latency-us = <4000>; exit-latency-us = <4000>;
@@ -545,7 +545,7 @@ etm7_out: endpoint { }; }; - ap-ahb { + ahb { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>;
arch/arm64/boot/dts/sprd/sharkl64.dtsi +1 -1
@@ -16,7 +16,7 @@ soc { #size-cells = <2>; ranges; - ap-apb { + apb { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>;
arch/arm64/boot/dts/sprd/whale2.dtsi +4 -4
@@ -81,7 +81,7 @@ apapb_gate: clock-controller@70b00000 { #clock-cells = <1>; }; - ap-apb@70000000 { + apb@70000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>;
@@ -136,7 +136,7 @@ uart3: serial@300000 { }; }; - ap-ahb { + ahb { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>;
@@ -183,7 +183,7 @@ sdio3: mmc@50430000 { }; }; - aon { + aon-bus { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>;
@@ -285,7 +285,7 @@ watchdog@40310000 { }; }; - agcp { + agcp-bus { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>;
Signature · 1 line
2.51.0
Krzysztof Kozlowski
AppliedQuoted 5 lines · Rob Herring (Arm)
Update Spreadtrum platforms node name to the recommended standard node names. Generally, node names and paths aren't considered ABI, so it is safe to change them.
Applied, thanks!
[1/1] arm64: dts: sprd: Use recommended node names
https://git.kernel.org/krzk/linux-dt/c/714b5a789f957871f18433645aa39d9109f194fb
Best regards,
Signature · 1 line
Krzysztof Kozlowski <[email protected]>