FAILED: patch "[PATCH] usb: dwc3: keep susphy enabled during exit to avoid" failed to apply to 5.10-stable tree

The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x e1003aa7ec9eccdde4c926bd64ef42816ad55f25
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2025122912-stuck-knickers-4454@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From e1003aa7ec9eccdde4c926bd64ef42816ad55f25 Mon Sep 17 00:00:00 2001
From: Udipto Goswami <[email protected]>
Date: Wed, 26 Nov 2025 11:12:21 +0530
Subject: [PATCH] usb: dwc3: keep susphy enabled during exit to avoid
controller faults

On some platforms, switching USB roles from host to device can trigger controller faults due to premature PHY power-down. This occurs when the PHY is disabled too early during teardown, causing synchronization issues between the PHY and controller.

Keep susphy enabled during dwc3_host_exit() and dwc3_gadget_exit() ensures the PHY remains in a low-power state capable of handling required commands during role switch.

index bc3fe31638b9..8a35a6901db7 100644
@@ -4826,7 +4826,7 @@ void dwc3_gadget_exit(struct dwc3 *dwc)
 	if (!dwc->gadget)
 		return;
 
-	dwc3_enable_susphy(dwc, false);
+	dwc3_enable_susphy(dwc, true);
 	usb_del_gadget(dwc->gadget);
 	dwc3_gadget_free_endpoints(dwc);
 	usb_put_gadget(dwc->gadget);

index cf6512ed17a6..96b588bd08cd 100644
@@ -227,7 +227,7 @@ void dwc3_host_exit(struct dwc3 *dwc)
 	if (dwc->sys_wakeup)
 		device_init_wakeup(&dwc->xhci->dev, false);
 
-	dwc3_enable_susphy(dwc, false);
+	dwc3_enable_susphy(dwc, true);
 	platform_device_unregister(dwc->xhci);
 	dwc->xhci = NULL;
 }

From: Udipto Goswami <[email protected]>

[ Upstream commit e1003aa7ec9eccdde4c926bd64ef42816ad55f25 ]

On some platforms, switching USB roles from host to device can trigger controller faults due to premature PHY power-down. This occurs when the PHY is disabled too early during teardown, causing synchronization issues between the PHY and controller.

Keep susphy enabled during dwc3_host_exit() and dwc3_gadget_exit() ensures the PHY remains in a low-power state capable of handling required commands during role switch.

---
 drivers/usb/dwc3/gadget.c | 2 +-
 drivers/usb/dwc3/host.c   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

index 7aa4a7a46233..5ea6d0c929db 100644
@@ -4109,7 +4109,7 @@ void dwc3_gadget_exit(struct dwc3 *dwc)
 	if (!dwc->gadget)
 		return;
 
-	dwc3_enable_susphy(dwc, false);
+	dwc3_enable_susphy(dwc, true);
 	usb_del_gadget(dwc->gadget);
 	dwc3_gadget_free_endpoints(dwc);
 	usb_put_gadget(dwc->gadget);

index 05718f6fa60d..9fa76abdaadc 100644
@@ -155,7 +155,7 @@ int dwc3_host_init(struct dwc3 *dwc)
 
 void dwc3_host_exit(struct dwc3 *dwc)
 {
-	dwc3_enable_susphy(dwc, false);
+	dwc3_enable_susphy(dwc, true);
 	platform_device_unregister(dwc->xhci);
 	dwc->xhci = NULL;
 }

2.51.0