hwrng: airoha set rng quality to 900
Subsystems (2)
PATCH 1/1 hwrng: airoha set rng quality to 900
Airoha uses RAW mode to collect noise from the TRNG. These appear to be unprocessed oscillations from the tero loop. For this reason, they do not have a perfect distribution and entropy. Simple noise compression reduces its size by 9%, so setting the quality to 900 seems reasonable. The same value is used by the downstream driver.
Compare the size before and after compression:
$ ls -l random_airoha* -rw-r--r-- 1 aleksander aleksander 76546048 Jan 3 23:43 random_airoha -rw-rw-r-- 1 aleksander aleksander 69783562 Jan 5 20:23 random_airoha.zip
FIPS test results:
$ cat random_airoha | rngtest -c 10000 rngtest 2.6 Copyright (c) 2004 by Henrique de Moraes Holschuh This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
rngtest: starting FIPS tests...
rngtest: bits received from input: 200000032
rngtest: FIPS 140-2 successes: 0
rngtest: FIPS 140-2 failures: 10000
rngtest: FIPS 140-2(2001-10-10) Monobit: 9957
rngtest: FIPS 140-2(2001-10-10) Poker: 10000
rngtest: FIPS 140-2(2001-10-10) Runs: 10000
rngtest: FIPS 140-2(2001-10-10) Long run: 4249
rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
rngtest: input channel speed: (min=953.674; avg=27698.935; max=19073.486)Mibits/s
rngtest: FIPS tests speed: (min=59.791; avg=298.028; max=328.853)Mibits/s
rngtest: Program run time: 647638 microseconds
In general, these data look like real noise, but with lower entropy than expected.
--- drivers/char/hw_random/airoha-trng.c | 1 + 1 file changed, 1 insertion(+)
drivers/char/hw_random/airoha-trng.c +1 -0
@@ -212,6 +212,7 @@ static int airoha_trng_probe(struct platform_device *pdev) trng->rng.init = airoha_trng_init; trng->rng.cleanup = airoha_trng_cleanup; trng->rng.read = airoha_trng_read; + trng->rng.quality =900 ; ret =devm_hwrng_register (dev, &trng->rng);if (ret) {
Signature · 1 line
2.47.3
Herbert Xu
maintainerQuoted 34 lines · Aleksander Jan Bajkowski
Airoha uses RAW mode to collect noise from the TRNG. These appear to be unprocessed oscillations from the tero loop. For this reason, they do not have a perfect distribution and entropy. Simple noise compression reduces its size by 9%, so setting the quality to 900 seems reasonable. The same value is used by the downstream driver.
Compare the size before and after compression:
$ ls -l random_airoha*(quoted diff) +0
-2-rw-r--r-- 1 aleksander aleksander 76546048 Jan 3 23:43 random_airoha -rw-rw-r-- 1 aleksander aleksander 69783562 Jan 5 20:23 random_airoha.zipFIPS test results:
$ cat random_airoha | rngtest -c 10000 rngtest 2.6 Copyright (c) 2004 by Henrique de Moraes Holschuh This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.rngtest: starting FIPS tests...
rngtest: bits received from input: 200000032
rngtest: FIPS 140-2 successes: 0
rngtest: FIPS 140-2 failures: 10000
rngtest: FIPS 140-2(2001-10-10) Monobit: 9957
rngtest: FIPS 140-2(2001-10-10) Poker: 10000
rngtest: FIPS 140-2(2001-10-10) Runs: 10000
rngtest: FIPS 140-2(2001-10-10) Long run: 4249
rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
rngtest: input channel speed: (min=953.674; avg=27698.935; max=19073.486)Mibits/s
rngtest: FIPS tests speed: (min=59.791; avg=298.028; max=328.853)Mibits/s
rngtest: Program run time: 647638 microsecondsIn general, these data look like real noise, but with lower entropy than expected.
Quoted 6 lines
Fixes e53ca8efcc5e ("hwrng: airoha - add support for Airoha EN7581 TRNG")Suggested-by Benjamin Larsson <[email protected]>Signed-off-by Aleksander Jan Bajkowski <[email protected]>--- drivers/char/hw_random/airoha-trng.c | 1 + 1 file changed, 1 insertion(+)
Patch applied. Thanks.
Signature · 3 lines
Email: Herbert Xu <[email protected]> Home Page: http://gondor.apana.org.au/~herbert/ PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt