Skip to contentSkip to conversation

FAILED: patch "[PATCH] PCI: brcmstb: Fix disabling L0s capability" failed to apply to 5.10-stable tree

PATCH New [email protected] 2 participants 2 messages Jan 5

Subsystems (6)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 9583f9d22991d2cfb5cc59a2552040c4ae98d998
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2026010522-salami-progeny-1e6e@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 9583f9d22991d2cfb5cc59a2552040c4ae98d998 Mon Sep 17 00:00:00 2001
From: Jim Quinlan <[email protected]>
Date: Fri, 3 Oct 2025 13:04:36 -0400
Subject: [PATCH] PCI: brcmstb: Fix disabling L0s capability

caab002d5069 ("PCI: brcmstb: Disable L0s component of ASPM if requested") set PCI_EXP_LNKCAP_ASPM_L1 and (optionally) PCI_EXP_LNKCAP_ASPM_L0S in PCI_EXP_LNKCAP (aka PCIE_RC_CFG_PRIV1_LINK_CAPABILITY in brcmstb).

But instead of using PCI_EXP_LNKCAP_ASPM_L1 and PCI_EXP_LNKCAP_ASPM_L0S directly, it used PCIE_LINK_STATE_L1 and PCIE_LINK_STATE_L0S, which are Linux-created values that only coincidentally matched the PCIe spec. b478e162f227 ("PCI/ASPM: Consolidate link state defines") later changed them so they no longer matched the PCIe spec, so the bits ended up in the wrong place in PCI_EXP_LNKCAP.

Use PCI_EXP_LNKCAP_ASPM_L0S to clear L0s support when there's an 'aspm-no-l0s' property. Rely on brcmstb hardware to advertise L0s and/or L1 support otherwise.

Fixes caab002d5069 ("PCI: brcmstb: Disable L0s component of ASPM if requested")
[mani: reworded subject and description, added closes tag and CCed stable]
[bhelgaas: commit log]
drivers/pci/controller/pcie-brcmstb.c +3 -7
index 9afbd02ded35..7e9b2f6a604a 100644
@@ -48,7 +48,6 @@
 
 #define PCIE_RC_CFG_PRIV1_LINK_CAPABILITY			0x04dc
 #define  PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_MAX_LINK_WIDTH_MASK	0x1f0
-#define  PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK	0xc00
 
 #define PCIE_RC_CFG_PRIV1_ROOT_CAP			0x4f8
 #define  PCIE_RC_CFG_PRIV1_ROOT_CAP_L1SS_MODE_MASK	0xf8
@@ -1075,7 +1074,7 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
 	void __iomem *base = pcie->base;
 	struct pci_host_bridge *bridge;
 	struct resource_entry *entry;
-	u32 tmp, burst, aspm_support, num_lanes, num_lanes_cap;
+	u32 tmp, burst, num_lanes, num_lanes_cap;
 	u8 num_out_wins = 0;
 	int num_inbound_wins = 0;
 	int memc, ret;
@@ -1175,12 +1174,9 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
 
 
 	/* Don't advertise L0s capability if 'aspm-no-l0s' */
-	aspm_support = PCIE_LINK_STATE_L1;
-	if (!of_property_read_bool(pcie->np, "aspm-no-l0s"))
-		aspm_support |= PCIE_LINK_STATE_L0S;
 	tmp = readl(base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY);
-	u32p_replace_bits(&tmp, aspm_support,
-		PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK);
+	if (of_property_read_bool(pcie->np, "aspm-no-l0s"))
+		tmp &= ~PCI_EXP_LNKCAP_ASPM_L0S;
 	writel(tmp, base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY);
 
 	/* 'tmp' still holds the contents of PRIV1_LINK_CAPABILITY */
maintainer
#1 lore raw

PATCH 1/1 PCI: brcmstb: Fix disabling L0s capability

From: Jim Quinlan <[email protected]>

[ Upstream commit 9583f9d22991d2cfb5cc59a2552040c4ae98d998 ]

caab002d5069 ("PCI: brcmstb: Disable L0s component of ASPM if requested") set PCI_EXP_LNKCAP_ASPM_L1 and (optionally) PCI_EXP_LNKCAP_ASPM_L0S in PCI_EXP_LNKCAP (aka PCIE_RC_CFG_PRIV1_LINK_CAPABILITY in brcmstb).

But instead of using PCI_EXP_LNKCAP_ASPM_L1 and PCI_EXP_LNKCAP_ASPM_L0S directly, it used PCIE_LINK_STATE_L1 and PCIE_LINK_STATE_L0S, which are Linux-created values that only coincidentally matched the PCIe spec. b478e162f227 ("PCI/ASPM: Consolidate link state defines") later changed them so they no longer matched the PCIe spec, so the bits ended up in the wrong place in PCI_EXP_LNKCAP.

Use PCI_EXP_LNKCAP_ASPM_L0S to clear L0s support when there's an 'aspm-no-l0s' property. Rely on brcmstb hardware to advertise L0s and/or L1 support otherwise.

Fixes caab002d5069 ("PCI: brcmstb: Disable L0s component of ASPM if requested")
[mani: reworded subject and description, added closes tag and CCed stable]
[bhelgaas: commit log]
[ Adjust context in variable declaration ]
---
 drivers/pci/controller/pcie-brcmstb.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)
drivers/pci/controller/pcie-brcmstb.c +3 -7
index 85be07e8b418..a5454b39672f 100644
@@ -43,7 +43,6 @@
 #define  PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK	0xffffff
 
 #define PCIE_RC_CFG_PRIV1_LINK_CAPABILITY			0x04dc
-#define  PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK	0xc00
 
 #define PCIE_RC_DL_MDIO_ADDR				0x1100
 #define PCIE_RC_DL_MDIO_WR_DATA				0x1104
@@ -865,7 +864,7 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
 	int num_out_wins = 0;
 	u16 nlw, cls, lnksta;
 	int i, ret, memc;
-	u32 tmp, burst, aspm_support;
+	u32 tmp, burst;
 
 	/* Reset the bridge */
 	pcie->bridge_sw_init_set(pcie, 1);
@@ -987,12 +986,9 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
 	}
 
 	/* Don't advertise L0s capability if 'aspm-no-l0s' */
-	aspm_support = PCIE_LINK_STATE_L1;
-	if (!of_property_read_bool(pcie->np, "aspm-no-l0s"))
-		aspm_support |= PCIE_LINK_STATE_L0S;
 	tmp = readl(base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY);
-	u32p_replace_bits(&tmp, aspm_support,
-		PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK);
+	if (of_property_read_bool(pcie->np, "aspm-no-l0s"))
+		tmp &= ~PCI_EXP_LNKCAP_ASPM_L0S;
 	writel(tmp, base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY);
 
 	/*
Signature · 1 line
2.51.0