Add the System Timer Module counter
Subsystems (6)
v4 cover Add the System Timer Module counter
The NXP S32 family provides a System Timer Module (STM), a 32-bit free-running counter clocked from a peripheral clock. The STM includes a prescaler and one or more compare channels generating optional interrupts. When used as a generic hardware counter, only the main free-running counter is required, while the compare channels are typically unused.
On S32G2 devices, the STM is exposed as a simple counter block that can operate continuously and be shared across subsystems such as the Linux kernel, firmware components running on Cortex-M7 cores, or other co-processors. The counter can be read atomically and provides a stable timestamp source to correlate events occurring in different execution contexts.
The Linux kernel controls the STM through a memory-mapped interface, configuring the prescaler, enabling or disabling the counter, and accounting for wrap-arounds. Other subsystems access the counter in read-only mode, making it a shared timestamp reference across the platform.
This driver adds support for the STM when used as a counter on S32G2 platforms. The device is described in the device tree using the following compatible:
compatible = "nxp,s32g2-stm-cnt";
The driver exposes basic counter functionality: start, stop, reset, prescaler configuration, and overflow handling.
Changelog:
* v4
- Split context structure to suspend/resume
- Converted counter to a u64 to accumulate the time
- Replaced 'reset' to a count write to reset (William Breathitt Gray)
- Added events for userspace (William Breathitt Gray)
- Added action COUNTER_SYNAPSE_ACTION_RISING_EDGE for signal (William Breathitt Gray)
- Renamed counter name to "System Timer Module Counter" (William Breathitt Gray)
* v3
- Fixed compatible typo "nxp,s32g2-stm" to "nxp,s32g2-stm-cnt"
* v2
- Added Rob's tag
** kbuild
- Reordered alphabetically the headers
- Added bitfield.h header
- Use DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Daniel Lezcano (3):
counters: Reorder the Makefile
dt-bindings: counter: Add NXP System Timer Module Counter
counter: Add STM based counter
.../bindings/counter/nxp,s32g2-stm-cnt.yaml | 64 +++ arch/arm64/boot/dts/freescale/s32g2.dtsi | 6 +- .../boot/dts/freescale/s32g274a-rdb2.dts | 10 +- drivers/counter/Kconfig | 10 + drivers/counter/Makefile | 21 +- drivers/counter/nxp-stm-cnt.c | 433 ++++++++++++++++++ 6 files changed, 525 insertions(+), 19 deletions(-) create mode 100644 Documentation/devicetree/bindings/counter/nxp,s32g2-stm-cnt.yaml create mode 100644 drivers/counter/nxp-stm-cnt.c
Signature · 1 line
2.43.0
PATCH v4 1/3 counters: Reorder the Makefile
The next changes provide a new driver. For the sake of clarity, reorder the Makefile alphabetically.
No functional changes intended.
--- drivers/counter/Makefile | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-)
drivers/counter/Makefile +11 -9
@@ -6,14 +6,16 @@ obj-$(CONFIG_COUNTER) += counter.o counter-y := counter-core.o counter-sysfs.o counter-chrdev.o -obj-$(CONFIG_I8254) += i8254.o -obj-$(CONFIG_104_QUAD_8) += 104-quad-8.o +obj-$(CONFIG_104_QUAD_8) += 104-quad-8.o +obj-$(CONFIG_FTM_QUADDEC) += ftm-quaddec.o +obj-$(CONFIG_I8254) += i8254.o +obj-$(CONFIG_INTEL_QEP) += intel-qep.o obj-$(CONFIG_INTERRUPT_CNT) += interrupt-cnt.o -obj-$(CONFIG_RZ_MTU3_CNT) += rz-mtu3-cnt.o -obj-$(CONFIG_STM32_TIMER_CNT) += stm32-timer-cnt.o -obj-$(CONFIG_STM32_LPTIMER_CNT) += stm32-lptimer-cnt.o -obj-$(CONFIG_TI_EQEP) += ti-eqep.o -obj-$(CONFIG_FTM_QUADDEC) += ftm-quaddec.o obj-$(CONFIG_MICROCHIP_TCB_CAPTURE) += microchip-tcb-capture.o -obj-$(CONFIG_INTEL_QEP) += intel-qep.o -obj-$(CONFIG_TI_ECAP_CAPTURE) += ti-ecap-capture.o +obj-$(CONFIG_RZ_MTU3_CNT) += rz-mtu3-cnt.o +obj-$(CONFIG_STM32_TIMER_CNT) += stm32-timer-cnt.o +obj-$(CONFIG_STM32_LPTIMER_CNT) += stm32-lptimer-cnt.o +obj-$(CONFIG_TI_ECAP_CAPTURE) += ti-ecap-capture.o +obj-$(CONFIG_TI_EQEP) += ti-eqep.o + +
Signature · 1 line
2.43.0
PATCH v4 2/3 dt-bindings: counter: Add NXP System Timer Module Counter
In reply to Daniel LezcanoAdd the System Timer Module description found on the NXP s32 platform when it is used as a counter and the compatible for the s32g2 variant.
--- .../bindings/counter/nxp,s32g2-stm-cnt.yaml | 64 +++++++++++++++++++ arch/arm64/boot/dts/freescale/s32g2.dtsi | 6 +- .../boot/dts/freescale/s32g274a-rdb2.dts | 10 +-- 3 files changed, 70 insertions(+), 10 deletions(-) create mode 100644 Documentation/devicetree/bindings/counter/nxp,s32g2-stm-cnt.yaml
Documentation/devicetree/bindings/counter/nxp,s32g2-stm-cnt.yaml new file +64 -0
@@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/counter/nxp,s32g2-stm-cnt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP System Timer Module (STM) + +maintainers: + - Daniel Lezcano <[email protected]> + +description: + The System Timer Module supports commonly required system and application + software timing functions. STM includes a 32-bit count-up timer and four + 32-bit compare channels with a separate interrupt source for each channel. + The counter is driven by the STM module clock divided by an 8-bit prescale + value. + +properties: + compatible: + oneOf: + - const: nxp,s32g2-stm-cnt + - items: + - const: nxp,s32g3-stm-cnt + - const: nxp,s32g2-stm-cnt + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Counter clock + - description: Module clock + - description: Register clock + + clock-names: + items: + - const: counter + - const: module + - const: register + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + timer@4011c000 { + compatible = "nxp,s32g2-stm-cnt"; + reg = <0x4011c000 0x3000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>; + clock-names = "counter", "module", "register"; + };
arch/arm64/boot/dts/freescale/s32g2.dtsi +3 -3
@@ -579,7 +579,7 @@ swt6: watchdog@40208000 { }; stm4: timer@4021c000 { - compatible = "nxp,s32g2-stm"; + compatible = "nxp,s32g2-stm-cnt"; reg = <0x4021c000 0x3000>; clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>; clock-names = "counter", "module", "register";
@@ -588,7 +588,7 @@ stm4: timer@4021c000 { }; stm5: timer@40220000 { - compatible = "nxp,s32g2-stm"; + compatible = "nxp,s32g2-stm-cnt"; reg = <0x40220000 0x3000>; clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>; clock-names = "counter", "module", "register";
@@ -597,7 +597,7 @@ stm5: timer@40220000 { }; stm6: timer@40224000 { - compatible = "nxp,s32g2-stm"; + compatible = "nxp,s32g2-stm-cnt"; reg = <0x40224000 0x3000>; clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>; clock-names = "counter", "module", "register";
arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts +3 -7
@@ -41,19 +41,15 @@ &uart1 { status = "okay"; }; -&stm0 { +&stm4 { status = "okay"; }; -&stm1 { +&stm5 { status = "okay"; }; -&stm2 { - status = "okay"; -}; - -&stm3 { +&stm6 { status = "okay"; };
Signature · 1 line
2.43.0
PATCH v4 3/3 counter: Add STM based counter
In reply to Daniel LezcanoThe NXP S32G2 automotive platform integrates four Cortex-A53 cores and three Cortex-M7 cores, along with a large number of timers and counters. These hardware blocks can be used as clocksources or clockevents, or as timestamp counters shared across the various subsystems running alongside the Linux kernel, such as firmware components. Their actual usage depends on the overall platform software design.
In a Linux-based system, the kernel controls the counter, which is a read-only shared resource for the other subsystems. One of its primary purposes is to act as a common timestamp source for messages or traces, allowing correlation of events occurring in different operating system contexts.
These changes introduce a basic counter driver that can start, stop, and reset the counter. It also handles overflow accounting and configures the prescaler value.
--- drivers/counter/Kconfig | 10 + drivers/counter/Makefile | 1 + drivers/counter/nxp-stm-cnt.c | 433 ++++++++++++++++++++++++++++++++++ 3 files changed, 444 insertions(+) create mode 100644 drivers/counter/nxp-stm-cnt.c
drivers/counter/Kconfig +10 -0
@@ -90,6 +90,16 @@ config MICROCHIP_TCB_CAPTURE To compile this driver as a module, choose M here: the module will be called microchip-tcb-capture. +config NXP_STM_CNT + tristate "NXP System Timer Module Counter driver" + depends on ARCH_S32 || COMPILE_TEST + help + Select this option to enable the NXP System Timer Module + Counter driver. + + To compile this driver as a module, choose M here: the + module will be called nxp_stm_cnt. + config RZ_MTU3_CNT tristate "Renesas RZ/G2L MTU3a counter driver" depends on RZ_MTU3
drivers/counter/Makefile +1 -0
@@ -12,6 +12,7 @@ obj-$(CONFIG_I8254) += i8254.o obj-$(CONFIG_INTEL_QEP) += intel-qep.o obj-$(CONFIG_INTERRUPT_CNT) += interrupt-cnt.o obj-$(CONFIG_MICROCHIP_TCB_CAPTURE) += microchip-tcb-capture.o +obj-$(CONFIG_NXP_STM_CNT) += nxp-stm-cnt.o obj-$(CONFIG_RZ_MTU3_CNT) += rz-mtu3-cnt.o obj-$(CONFIG_STM32_TIMER_CNT) += stm32-timer-cnt.o obj-$(CONFIG_STM32_LPTIMER_CNT) += stm32-lptimer-cnt.o
drivers/counter/nxp-stm-cnt.c new file +433 -0
433 lines not on this page · raw message
Signature · 1 line
2.43.0
Frank Li
maintainerRe: [PATCH v4 3/3] counter: Add STM based counter
Quoted 296 lines · Daniel Lezcano
The NXP S32G2 automotive platform integrates four Cortex-A53 cores and three Cortex-M7 cores, along with a large number of timers and counters. These hardware blocks can be used as clocksources or clockevents, or as timestamp counters shared across the various subsystems running alongside the Linux kernel, such as firmware components. Their actual usage depends on the overall platform software design.
In a Linux-based system, the kernel controls the counter, which is a read-only shared resource for the other subsystems. One of its primary purposes is to act as a common timestamp source for messages or traces, allowing correlation of events occurring in different operating system contexts.
These changes introduce a basic counter driver that can start, stop, and reset the counter. It also handles overflow accounting and configures the prescaler value.
Signed-off-by Daniel Lezcano <[email protected]>--- drivers/counter/Kconfig | 10 + drivers/counter/Makefile | 1 + drivers/counter/nxp-stm-cnt.c | 433 ++++++++++++++++++++++++++++++++++ 3 files changed, 444 insertions(+) create mode 100644 drivers/counter/nxp-stm-cnt.cdrivers/counter/Kconfig +10
-0@@ -90,6 +90,16 @@ config MICROCHIP_TCB_CAPTURE To compile this driver as a module, choose M here: the module will be called microchip-tcb-capture. +config NXP_STM_CNT + tristate "NXP System Timer Module Counter driver" + depends on ARCH_S32 || COMPILE_TEST + help + Select this option to enable the NXP System Timer Module + Counter driver. + + To compile this driver as a module, choose M here: the + module will be called nxp_stm_cnt. + config RZ_MTU3_CNT tristate "Renesas RZ/G2L MTU3a counter driver" depends on RZ_MTU3drivers/counter/Makefile +1
-0@@ -12,6 +12,7 @@ obj-$(CONFIG_I8254) += i8254.o obj-$(CONFIG_INTEL_QEP) += intel-qep.o obj-$(CONFIG_INTERRUPT_CNT) += interrupt-cnt.o obj-$(CONFIG_MICROCHIP_TCB_CAPTURE) += microchip-tcb-capture.o +obj-$(CONFIG_NXP_STM_CNT) += nxp-stm-cnt.o obj-$(CONFIG_RZ_MTU3_CNT) += rz-mtu3-cnt.o obj-$(CONFIG_STM32_TIMER_CNT) += stm32-timer-cnt.o obj-$(CONFIG_STM32_LPTIMER_CNT) += stm32-lptimer-cnt.odrivers/counter/nxp-stm-cnt.c new file +231
-0@@ -0,0 +1,433 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright 2018,2021-2025 NXP +* Copyright 2025 Linaro Limited +* +* Author: Daniel Lezcano <[email protected]> +* +* NXP S32G System Timer Module counters: +* +* STM supports commonly required system and application software +* timing functions. STM includes a 32-bit count-up timer and four +* 32-bit compare channels with a separate interrupt source for each +* channel. The timer is driven by the STM module clock divided by an +* 8-bit prescale value (1 to 256). It has ability to stop the timer +* in Debug mode +* +*/ +#include <linux/bitfield.h> +#include <linux/clk.h> +#include <linux/counter.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/slab.h> +#include <linux/spinlock.h> + +#define STM_CR (__base) (__base) +#define STM_CR_TEN BIT(0) +#define STM_CR_FRZ BIT(1) +#define STM_CR_CPS_MASK GENMASK(15, 8) + +#define STM_CCR0 (__base) ((__base) + 0x10) +#define STM_CCR_CEN BIT(0) + +#define STM_CIR0 (__base) ((__base) + 0x14) +#define STM_CIR_CIF BIT(0) + +#define STM_CMP0 (__base) ((__base) + 0x18) + +#define STM_CNT (__base) ((__base) + 0x04) + +#define STM_ENABLE_MASK (STM_CR_FRZ | STM_CR_TEN) + +struct nxp_stm_context { +u32 counter; +u8 prescaler; +bool is_started; +}; + +struct nxp_stm_cnt { +spinlock_t lock;/* Protects counter */ +void __iomem *base; +u64 counter; +struct nxp_stm_context context; +}; + +static void nxp_stm_cnt_enable (struct nxp_stm_cnt *stm_cnt) +{ +u32 reg; + + reg =readl (STM_CR (stm_cnt->base)); + + reg |=STM_ENABLE_MASK ; + +writel (reg,STM_CR (stm_cnt->base)); +} + +static void nxp_stm_cnt_disable (struct nxp_stm_cnt *stm_cnt) +{ +u32 reg; + + reg =readl (STM_CR (stm_cnt->base)); + + reg &= ~STM_ENABLE_MASK ; + +writel (reg,STM_CR (stm_cnt->base)); +} + +static void nxp_stm_cnt_ccr_disable (struct nxp_stm_cnt *stm_cnt) +{ +writel (0 ,STM_CCR0 (stm_cnt->base)); +} + +static void nxp_stm_cnt_ccr_enable (struct nxp_stm_cnt *stm_cnt) +{ +writel (STM_CCR_CEN ,STM_CCR0 (stm_cnt->base)); +} + +static void nxp_stm_cnt_cfg_overflow (struct nxp_stm_cnt *stm_cnt) +{ +/* +* The STM does not have a dedicated interrupt when the +* counter wraps. We need to use the comparator to check if it +* wrapped or not. +*/ +writel (0 ,STM_CMP0 (stm_cnt->base)); +} + +static u32 nxp_stm_cnt_get_counter (struct nxp_stm_cnt *stm_cnt) +{ +return readl (STM_CNT (stm_cnt->base)); +} + +static void nxp_stm_cnt_set_counter (struct nxp_stm_cnt *stm_cnt,u32 counter) +{ +writel (counter,STM_CNT (stm_cnt->base)); +} + +static void nxp_stm_cnt_set_prescaler (struct nxp_stm_cnt *stm_cnt,u8 prescaler) +{ +u32 reg; + + reg =readl (STM_CR (stm_cnt->base)); + +FIELD_MODIFY (STM_CR_CPS_MASK , ®, prescaler); + +writel (reg,STM_CR (stm_cnt->base)); +} + +static u8 nxp_stm_cnt_get_prescaler (struct nxp_stm_cnt *stm_cnt) +{ +u32 reg =readl (STM_CR (stm_cnt->base)); + +return FIELD_GET (STM_CR_CPS_MASK , reg); +} + +static bool nxp_stm_cnt_is_started (struct nxp_stm_cnt *stm_cnt) +{ +u32 reg; + + reg =readl (STM_CR (stm_cnt->base)); + +return !!FIELD_GET (STM_CR_TEN , reg); +} + +static void nxp_stm_cnt_irq_ack (struct nxp_stm_cnt *stm_cnt) +{ +writel (STM_CIR_CIF ,STM_CIR0 (stm_cnt->base)); +} + +static irqreturn_t nxp_stm_cnt_irq (int irq,void *dev_id) +{ +struct counter_device *counter = dev_id; +struct nxp_stm_cnt *stm_cnt =counter_priv (counter); + +nxp_stm_cnt_irq_ack (stm_cnt); + +counter_push_event (counter,COUNTER_EVENT_OVERFLOW ,0 ); + +spin_lock (&stm_cnt->lock); + stm_cnt->counter +=U32_MAX ; +spin_unlock (&stm_cnt->lock); + +return IRQ_HANDLED ; +} + +static void nxp_stm_cnt_start (struct nxp_stm_cnt *stm_cnt) +{ +nxp_stm_cnt_cfg_overflow (stm_cnt); +nxp_stm_cnt_enable (stm_cnt); +nxp_stm_cnt_ccr_enable (stm_cnt); +} + +static void nxp_stm_cnt_stop (struct nxp_stm_cnt *stm_cnt) +{ +nxp_stm_cnt_disable (stm_cnt); +nxp_stm_cnt_irq_ack (stm_cnt); +nxp_stm_cnt_ccr_disable (stm_cnt); +} + +static int nxp_stm_cnt_prescaler_read (struct counter_device *counter, +struct counter_count *count,u8 *val) +{ +struct nxp_stm_cnt *stm_cnt =counter_priv (counter); + + *val =nxp_stm_cnt_get_prescaler (stm_cnt); + +return 0 ; +} + +static int nxp_stm_cnt_prescaler_write (struct counter_device *counter, +struct counter_count *count,u8 val) +{ +struct nxp_stm_cnt *stm_cnt =counter_priv (counter); + +nxp_stm_cnt_set_prescaler (stm_cnt, val); + +return 0 ; +} + +static int nxp_stm_cnt_count_enable_write (struct counter_device *counter, +struct counter_count *count,u8 enable) +{ +struct nxp_stm_cnt *stm_cnt =counter_priv (counter); + +if (enable) +nxp_stm_cnt_start (stm_cnt); +else +nxp_stm_cnt_stop (stm_cnt); + +return 0 ; +} + +static int nxp_stm_cnt_count_enable_read (struct counter_device *counter, +struct counter_count *count,u8 *enable) +{ +struct nxp_stm_cnt *stm_cnt =counter_priv (counter); + + *enable =nxp_stm_cnt_is_started (stm_cnt); + +return 0 ; +} + +static struct counter_comp stm_cnt_count_ext[] = { +COUNTER_COMP_COUNT_U8 ("prescaler" , nxp_stm_cnt_prescaler_read, nxp_stm_cnt_prescaler_write), +COUNTER_COMP_ENABLE (nxp_stm_cnt_count_enable_read, nxp_stm_cnt_count_enable_write), +}; + +static int nxp_stm_cnt_action_read (struct counter_device *counter, +struct counter_count *count, +struct counter_synapse *synapse, +enum counter_synapse_action *action) +{ + *action =COUNTER_SYNAPSE_ACTION_RISING_EDGE ; + +return 0 ; +}
drivers/counter/nxp-stm-cnt.c line 241
Quoted 10 lines
drivers/counter/nxp-stm-cnt.c new file +10
-0+ +static int nxp_stm_cnt_count_read (struct counter_device *dev, +struct counter_count *count,u64 *val) +{ +struct nxp_stm_cnt *stm_cnt =counter_priv (dev); +unsigned long irqflags; + +spin_lock_irqsave (&stm_cnt->lock, irqflags); + *val = stm_cnt->counter +nxp_stm_cnt_get_counter (stm_cnt); +spin_unlock_irqrestore (&stm_cnt->lock, irqflags);
It think there are still rise condition here.
cpu 0 cpu 1
1: nxp_stm_cnt_get_counter(stm_cnt); (0)
2: irq_handle()
counter += INT_MAX;
3:
when wrap happen, nxp_stm_cnt_get_counter() return 0, but, irq still not handle yet.
so nxp_stm_cnt_count_read() return 0 at 1.
it return INT_MAX at 3 suddently.
Frank
Quoted 195 lines
drivers/counter/nxp-stm-cnt.c new file +192
-1+ +return 0 ; +} + +static int nxp_stm_cnt_count_write (struct counter_device *dev, +struct counter_count *count,u64 val) +{ +struct nxp_stm_cnt *stm_cnt =counter_priv (dev); +unsigned long irqflags; + +spin_lock_irqsave (&stm_cnt->lock, irqflags); + stm_cnt->counter =0 ; +nxp_stm_cnt_set_counter (stm_cnt,0 ); +spin_unlock_irqrestore (&stm_cnt->lock, irqflags); + +return 0 ; +} + +static const enum counter_function nxp_stm_cnt_functions[] = { +COUNTER_FUNCTION_INCREASE , +}; + +static int nxp_stm_cnt_function_read (struct counter_device *counter, +struct counter_count *count, +enum counter_function *function) +{ + *function =COUNTER_FUNCTION_INCREASE ; + +return 0 ; +} + +static int nxp_stm_cnt_watch_validate (struct counter_device *counter, +const struct counter_watch *watch) +{ +switch (watch->event) { +case COUNTER_EVENT_OVERFLOW : +return 0 ; +default : +return -EINVAL ; + } +} + +static const struct counter_ops nxp_stm_cnt_counter_ops = { + .action_read = nxp_stm_cnt_action_read, + .count_read = nxp_stm_cnt_count_read, + .count_write = nxp_stm_cnt_count_write, + .function_read = nxp_stm_cnt_function_read, + .watch_validate = nxp_stm_cnt_watch_validate, +}; + +static const enum counter_synapse_action nxp_stm_cnt_synapse_actions[] = { +COUNTER_SYNAPSE_ACTION_RISING_EDGE , +}; + +static struct counter_signal nxp_stm_cnt_signals[] = { + { + .id =0 , + .name ="Counter wrap signal" + }, +}; + +static struct counter_synapse nxp_stm_cnt_synapses[] = { + { + .actions_list = nxp_stm_cnt_synapse_actions, + .num_actions =ARRAY_SIZE (nxp_stm_cnt_synapse_actions), + .signal = &nxp_stm_cnt_signals[0 ], + }, +}; + +static struct counter_count nxp_stm_cnt_counts[] = { + { + .id =0 , + .name ="System Timer Module Counter" , + .synapses = nxp_stm_cnt_synapses, + .num_synapses =ARRAY_SIZE (nxp_stm_cnt_synapses), + .ext = stm_cnt_count_ext, + .num_ext =ARRAY_SIZE (stm_cnt_count_ext), + }, +}; + +static int nxp_stm_cnt_suspend (struct device *dev) +{ +struct nxp_stm_cnt *stm_cnt =dev_get_drvdata (dev); + + stm_cnt->context.is_started =nxp_stm_cnt_is_started (stm_cnt); + +if (stm_cnt->context.is_started) { +nxp_stm_cnt_stop (stm_cnt); + stm_cnt->context.prescaler =nxp_stm_cnt_get_prescaler (stm_cnt); + stm_cnt->context.counter =nxp_stm_cnt_get_counter (stm_cnt); + } + +return 0 ; +} + +static int nxp_stm_cnt_resume (struct device *dev) +{ +struct nxp_stm_cnt *stm_cnt =dev_get_drvdata (dev); + +if (stm_cnt->context.is_started) { +nxp_stm_cnt_set_counter (stm_cnt, stm_cnt->context.counter); +nxp_stm_cnt_set_prescaler (stm_cnt, stm_cnt->context.prescaler); +nxp_stm_cnt_start (stm_cnt); + } + +return 0 ; +} + +static DEFINE_SIMPLE_DEV_PM_OPS(nxp_stm_cnt_pm_ops, nxp_stm_cnt_suspend, + nxp_stm_cnt_resume); + +static int nxp_stm_cnt_probe (struct platform_device *pdev) +{ +struct device *dev = &pdev->dev; +struct device_node *np = dev->of_node; +struct counter_device *counter; +struct nxp_stm_cnt *stm_cnt; +struct clk *clk; +void __iomem *base; +int irq, ret; + + base =devm_of_iomap (dev, np,0 ,NULL ); +if (IS_ERR (base)) +return dev_err_probe (dev,PTR_ERR (base),"Failed to iomap %pOFn\n" , np); + + irq =platform_get_irq (pdev,0 ); +if (irq <0 ) +return dev_err_probe (dev, irq,"Failed to get IRQ\n" ); + + clk =devm_clk_get_enabled (dev,NULL ); +if (IS_ERR (clk)) +return dev_err_probe (dev,PTR_ERR (clk),"Clock not found\n" ); + + counter =devm_counter_alloc (dev,sizeof (*stm_cnt)); +if (!counter) +return -ENOMEM ; + + stm_cnt =counter_priv (counter); + + stm_cnt->base = base; + stm_cnt->counter =0 ; +spin_lock_init (&stm_cnt->lock); + + counter->name ="stm_counter" ; + counter->parent = &pdev->dev; + counter->ops = &nxp_stm_cnt_counter_ops; + counter->counts = nxp_stm_cnt_counts; + counter->num_counts =ARRAY_SIZE (nxp_stm_cnt_counts); + + ret =devm_request_irq (dev, irq, nxp_stm_cnt_irq,IRQF_TIMER |IRQF_NOBALANCING , +dev_name (&counter->dev), counter); +if (ret) +return dev_err_probe (dev, ret,"Unable to allocate interrupt line\n" ); + + ret =devm_counter_add (dev, counter); +if (ret) +return dev_err_probe (dev, ret,"Failed to register counter\n" ); + +platform_set_drvdata (pdev, stm_cnt); + +return 0 ; +} + +static void nxp_stm_cnt_remove (struct platform_device *pdev) +{ +struct nxp_stm_cnt *stm_cnt =platform_get_drvdata (pdev); + +if (nxp_stm_cnt_is_started (stm_cnt)) +nxp_stm_cnt_stop (stm_cnt); +} + +static const struct of_device_id nxp_stm_cnt_of_match[] = { + { .compatible ="nxp,s32g2-stm-cnt" , }, + { } +}; +MODULE_DEVICE_TABLE (of, nxp_stm_cnt_of_match); + +static struct platform_driver nxp_stm_cnt_driver = { + .probe = nxp_stm_cnt_probe, + .remove = nxp_stm_cnt_remove, + .driver = { + .name ="nxp-stm-cnt" , + .pm =pm_sleep_ptr (&nxp_stm_cnt_pm_ops), + .of_match_table = nxp_stm_cnt_of_match, + }, +}; +module_platform_driver (nxp_stm_cnt_driver); + +MODULE_LICENSE ("GPL" ); +MODULE_AUTHOR ("Daniel Lezcano" ); +MODULE_DESCRIPTION ("NXP System Timer Module counter driver" ); +MODULE_IMPORT_NS ("COUNTER" ); --2.43.0
Re: [PATCH v4 3/3] counter: Add STM based counter
Quoted 21 lines · Frank Li
Quoted 20 lines · Daniel Lezcano
The NXP S32G2 automotive platform integrates four Cortex-A53 cores and three Cortex-M7 cores, along with a large number of timers and counters. These hardware blocks can be used as clocksources or clockevents, or as timestamp counters shared across the various subsystems running alongside the Linux kernel, such as firmware components. Their actual usage depends on the overall platform software design.
In a Linux-based system, the kernel controls the counter, which is a read-only shared resource for the other subsystems. One of its primary purposes is to act as a common timestamp source for messages or traces, allowing correlation of events occurring in different operating system contexts.
These changes introduce a basic counter driver that can start, stop, and reset the counter. It also handles overflow accounting and configures the prescaler value.
Signed-off-by Daniel Lezcano <[email protected]>---
[ ... ]
Quoted 32 lines
Quoted 15 lines
drivers/counter/nxp-stm-cnt.c new file +15
-0+ +static struct counter_comp stm_cnt_count_ext[] = { +COUNTER_COMP_COUNT_U8 ("prescaler" , nxp_stm_cnt_prescaler_read, nxp_stm_cnt_prescaler_write), +COUNTER_COMP_ENABLE (nxp_stm_cnt_count_enable_read, nxp_stm_cnt_count_enable_write), +}; + +static int nxp_stm_cnt_action_read (struct counter_device *counter, +struct counter_count *count, +struct counter_synapse *synapse, +enum counter_synapse_action *action) +{ + *action =COUNTER_SYNAPSE_ACTION_RISING_EDGE ; + +return 0 ; +}drivers/counter/nxp-stm-cnt.c line 241
Quoted 10 lines
drivers/counter/nxp-stm-cnt.c new file +10
-0+ +static int nxp_stm_cnt_count_read (struct counter_device *dev, +struct counter_count *count,u64 *val) +{ +struct nxp_stm_cnt *stm_cnt =counter_priv (dev); +unsigned long irqflags; + +spin_lock_irqsave (&stm_cnt->lock, irqflags); + *val = stm_cnt->counter +nxp_stm_cnt_get_counter (stm_cnt); +spin_unlock_irqrestore (&stm_cnt->lock, irqflags);It think there are still rise condition here.
cpu 0 cpu 1
1:nxp_stm_cnt_get_counter(stm_cnt); (0)
2:irq_handle()counter += INT_MAX;
Quoted 8 lines
3:
when wrap happen,
nxp_stm_cnt_get_counter()return 0, but, irq still not handle yet.so
nxp_stm_cnt_count_read()return 0 at 1.it return
INT_MAXat 3 suddently.
Thanks for the review. Yes, it seems like there is a race for the reader result.
Except disabling / enabling the counter when reading the value, I don't see how to handle that case.
bool is_started = nxp_stm_cnt_is_started(stm_cnt);
if (is_started)
nxp_stm_cnt_disable(stm_cnt);
/* If the counter wrapped, the interrupt fired already */
spin_lock_irqsave(&stm_cnt->lock, irqflags);
/* Counter can be zero (or more), we don't care, UINT_MAX was added */ *val = stm_cnt->counter + nxp_stm_cnt_get_counter(stm_cnt);
spin_unlock_irqrestore(&stm_cnt->lock, irqflags);
if (is_started)
nxp_stm_cnt_enable(stm_cnt);
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
Frank Li
maintainerRe: [PATCH v4 3/3] counter: Add STM based counter
Quoted 64 lines · Daniel Lezcano
Quoted 21 lines · Frank Li
Quoted 20 lines · Daniel Lezcano
The NXP S32G2 automotive platform integrates four Cortex-A53 cores and three Cortex-M7 cores, along with a large number of timers and counters. These hardware blocks can be used as clocksources or clockevents, or as timestamp counters shared across the various subsystems running alongside the Linux kernel, such as firmware components. Their actual usage depends on the overall platform software design.
In a Linux-based system, the kernel controls the counter, which is a read-only shared resource for the other subsystems. One of its primary purposes is to act as a common timestamp source for messages or traces, allowing correlation of events occurring in different operating system contexts.
These changes introduce a basic counter driver that can start, stop, and reset the counter. It also handles overflow accounting and configures the prescaler value.
Signed-off-by Daniel Lezcano <[email protected]>---
[ ... ]
Quoted 39 lines
Quoted 15 lines
drivers/counter/nxp-stm-cnt.c new file +15
-0+ +static struct counter_comp stm_cnt_count_ext[] = { +COUNTER_COMP_COUNT_U8 ("prescaler" , nxp_stm_cnt_prescaler_read, nxp_stm_cnt_prescaler_write), +COUNTER_COMP_ENABLE (nxp_stm_cnt_count_enable_read, nxp_stm_cnt_count_enable_write), +}; + +static int nxp_stm_cnt_action_read (struct counter_device *counter, +struct counter_count *count, +struct counter_synapse *synapse, +enum counter_synapse_action *action) +{ + *action =COUNTER_SYNAPSE_ACTION_RISING_EDGE ; + +return 0 ; +}drivers/counter/nxp-stm-cnt.c line 241
Quoted 10 lines
drivers/counter/nxp-stm-cnt.c new file +10
-0+ +static int nxp_stm_cnt_count_read (struct counter_device *dev, +struct counter_count *count,u64 *val) +{ +struct nxp_stm_cnt *stm_cnt =counter_priv (dev); +unsigned long irqflags; + +spin_lock_irqsave (&stm_cnt->lock, irqflags); + *val = stm_cnt->counter +nxp_stm_cnt_get_counter (stm_cnt); +spin_unlock_irqrestore (&stm_cnt->lock, irqflags);It think there are still rise condition here.
cpu 0 cpu 1
1:nxp_stm_cnt_get_counter(stm_cnt); (0)
2:irq_handle()counter += INT_MAX;3:
when wrap happen,
nxp_stm_cnt_get_counter()return 0, but, irq still not handle yet.so
nxp_stm_cnt_count_read()return 0 at 1.
Quoted 8 lines
Quoted 1 line
it return
INT_MAXat 3 suddently.Thanks for the review. Yes, it seems like there is a race for the reader result.
Except disabling / enabling the counter when reading the value, I don't see how to handle that case.
I think needn't handler overflow at all.
See stm32_count_function_read()
comparor always is u32 val + delta. it can work if delta less U32_MAX/2.
If you real want to up to 64bit counter, perf counter have common solution for that
x_counter()
{
u32 v = readl():
stm->count += v - stm->last;
stm->last = v;
}you need enable irq, make sure at call x_counter() twice during counter wrap period.
No lock, no stop needed.
Frank
Quoted 29 lines
bool
is_started=nxp_stm_cnt_is_started(stm_cnt);if (
is_started)nxp_stm_cnt_disable(stm_cnt);/* If the counter wrapped, the interrupt fired already */
spin_lock_irqsave(&stm_cnt->lock, irqflags);/* Counter can be zero (or more), we don't care,
UINT_MAXwas added */ *val =stm_cnt->counter+nxp_stm_cnt_get_counter(stm_cnt);
spin_unlock_irqrestore(&stm_cnt->lock, irqflags);if (
is_started)nxp_stm_cnt_enable(stm_cnt);--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCsFollow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog