Skip to contentSkip to conversation

riscv: spacemit: Add SpacemiT K3 SoC and K3 Pico-ITX board

PATCH Superseded Guodong Xu 5 participants 19 messages Jan 8 – Jan 15

Subsystems (8)

v3 of 5 Superseded Latest is v5 →

lore
Share & tools
lore

Guodong Xu

author
#0 lore raw

v3 cover riscv: spacemit: Add SpacemiT K3 SoC and K3 Pico-ITX board

This series introduces basic support for the SpacemiT K3 SoC and the K3 Pico-ITX evaluation board.

This series (starting from v2) also adds descriptions about ISA extensions mandated by the RVA23 Profile Version 1.0 into riscv/extensions.yaml. There are extensive discussions about how to handle these new extensions in v2. In v3, here is my best understading of what I think we have reached consensus on.

The SpacemiT K3 is an SoC featuring 8 SpacemiT X100 RISC-V cores. The X100 is a 4-issue, out-of-order core compliant with the RVA23 profile, targeting high-performance scenarios. [1]

The K3 Pico-ITX is an evaluation board built around the K3 SoC.

From an RVA23 profile compliance perspective, the X100 supports all mandatory extensions required by RVA23U64 and RVA23S64.

Hi, Conor

For the binding riscv/extensions.ymal, here's what changed in v3:

1. Dropped the patch of adding "supm" into extensions.yaml. At the same time, I will start another patchset which implements the strategy outlined by Conor in Link [2]. I understand there could be different opinions and anyway, let's move the discussion about "supm" into a patchset of its own.
2. Dropped the dependency checks for "sha" on "h", "shcounterenw", and 6 others. "sha" implies these extensions, and it should be allowed to be declared independently.
3. Enchanced the dependency check of "ziccamoa" on "a". Sepcifically,
- added the dependecy check of "ziccamoa" on "zaamo" or on "a".
- added the dependency check of "za64rs" on "zalrsc" or on "a".
- added the dependency check of "ziccrse" on "zalrsc" or "a".
The commit message of this patch is updated too, to better explain the relationship between "ziccamoa", "za64rs", "ziccrse" and "a".
4. Enhanced checking dependency of "b" and "zba", "zbb", "zbs", making the dependency check in both directions.

Thank you for your review.

Other Changes in v3 include:
- Patch 1:
Acked-by: Krzysztof Kozlowski
- Patch 4:
Acked-by: Krzysztof Kozlowski
- Dropped Patch 5 "dt-bindings: serial: 8250: add SpacemiT K3 UART compatible" as it has been applied to tty-next.

The entire series now rebased on top of tty-next (tty.git), which now merged with v6.19-rc3.

Link to v2: https://lore.kernel.org/r/[email protected]

Changes in v2:
- Patch 1:
Fixed alphanumeric sorting order of compatible strings (swapped x100 and
x60) as per Krzysztof's feedback.
Update commit message with more information about X100 featurs per
Yixun's feedback.
- Patch 4:
Fixed the order to keep things alphabetically.
- Patch 6:
Use "one blank space" between name and email address.
- Patch 7 ~ 11:
New patches. Add description of RVA23 mandatory extensions into riscv
binding YAML file.
- Patch 12 (Patch 7 in v1):
Removed aliases node.
Updated 'riscv,isa-extensions' with new extension strings available
- Patch 13 (Patch 8 in v1):
Updated the memory address to the hardware truth.
Added aliases node in board dts.
- Patch 1,2,3,5: Add Reviewed-by and Acked-by collected.

Link to v1: https://lore.kernel.org/r/[email protected]

---
Guodong Xu (11):
dt-bindings: riscv: add SpacemiT X100 CPU compatible
dt-bindings: timer: add SpacemiT K3 CLINT
dt-bindings: interrupt-controller: add SpacemiT K3 APLIC
dt-bindings: interrupt-controller: add SpacemiT K3 IMSIC
dt-bindings: riscv: spacemit: add K3 and Pico-ITX board bindings
dt-bindings: riscv: Add B ISA extension description
dt-bindings: riscv: Add descriptions for Za64rs, Ziccamoa, Ziccif, and Zicclsm
dt-bindings: riscv: Add Ssccptr, Sscounterenw, Sstvala, Sstvecd, Ssu64xl
dt-bindings: riscv: Add Sha and its comprised extensions
riscv: dts: spacemit: add initial device tree of SpacemiT K3 SoC
riscv: dts: spacemit: add SpacemiT K3 Pico-ITX board device tree

 .../bindings/interrupt-controller/riscv,aplic.yaml |   1 +
 .../interrupt-controller/riscv,imsics.yaml         |   1 +
 Documentation/devicetree/bindings/riscv/cpus.yaml  |   1 +
 .../devicetree/bindings/riscv/extensions.yaml      | 169 +++++++
 .../devicetree/bindings/riscv/spacemit.yaml        |   4 +
 .../devicetree/bindings/timer/sifive,clint.yaml    |   1 +
 arch/riscv/boot/dts/spacemit/Makefile              |   1 +
 arch/riscv/boot/dts/spacemit/k3-pico-itx.dts       |  38 ++
 arch/riscv/boot/dts/spacemit/k3.dtsi               | 548 +++++++++++++++++++++
 9 files changed, 764 insertions(+)

---
base-commit: 322fc12949d2658da8c6b2866fffcb1daa7da019
change-id: 20251216-k3-basic-dt-cd9540061989

Best regards,

Signature · 1 line
Guodong Xu <[email protected]>
author
#1 lore raw

PATCH v3 1/11 dt-bindings: riscv: add SpacemiT X100 CPU compatible

Add compatible string for the SpacemiT X100 core. [1]

The X100 is a 64-bit RVA23-compliant RISC-V core from SpacemiT. X100 supports the RISC-V vector and hypervisor extensions and all mandatory extersions as required by the RVA23U64 and RVA23S64 profiles, per the definition in 'RVA23 Profile, Version 1.0'. [2]

From a microarchieture viewpoint, the X100 features a 4-issue out-of-order pipeline.

X100 is used in SpacemiT K3 SoC.

---
v3: Added Acked-by from Krzysztof.
v2: Fixed alphanumeric sorting of compatible strings, put x100 before x60,
as per Krzysztof's feedback.
Added reviewed-by from Yixun and Heinrich.
Updated the commit message to provide more information about X100.

---
 Documentation/devicetree/bindings/riscv/cpus.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/riscv/cpus.yaml +1 -0
index d733c0bd534fb63ed7c0eada97c42832431f1fc1..5feeb2203050ae1f1404100ab7ba93e224f72d97 100644
@@ -61,6 +61,7 @@ properties:
               - sifive,u7
               - sifive,u74
               - sifive,u74-mc
+              - spacemit,x100
               - spacemit,x60
               - thead,c906
               - thead,c908
Signature · 1 line
2.43.0
maintainer Acked-by on v3 1/11
#2 lore raw

Re: [PATCH v3 01/11] dt-bindings: riscv: add SpacemiT X100 CPU compatible

Quoted 10 lines · Guodong Xu

Add compatible string for the SpacemiT X100 core. [1]

The X100 is a 64-bit RVA23-compliant RISC-V core from SpacemiT. X100 supports the RISC-V vector and hypervisor extensions and all mandatory extersions as required by the RVA23U64 and RVA23S64 profiles, per the definition in 'RVA23 Profile, Version 1.0'. [2]

Quoted 1 line

From a microarchieture viewpoint, the X100 features a 4-issue

out-of-order pipeline.

Quoted 8 lines

X100 is used in SpacemiT K3 SoC.

I think Yixun Lan is going to pick this up, so

- Paul

author
#3 lore raw

PATCH v3 2/11 dt-bindings: timer: add SpacemiT K3 CLINT

In reply to Guodong Xu

Add compatible string for SpacemiT K3 CLINT.

---
v3: No change.
v2: Add Conor's Acked-by.

---
 Documentation/devicetree/bindings/timer/sifive,clint.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/timer/sifive,clint.yaml +1 -0
index 0d3b8dc362ba7e8d0ca6d0cea692ceddc5e1f89e..3bab40500df9bc2ba4f7d6f1bf340c8cbc06f9de 100644
@@ -33,6 +33,7 @@ properties:
               - eswin,eic7700-clint     # ESWIN EIC7700
               - sifive,fu540-c000-clint # SiFive FU540
               - spacemit,k1-clint       # SpacemiT K1
+              - spacemit,k3-clint       # SpacemiT K3
               - starfive,jh7100-clint   # StarFive JH7100
               - starfive,jh7110-clint   # StarFive JH7110
               - starfive,jh8100-clint   # StarFive JH8100
Signature · 1 line
2.43.0
author
#4 lore raw

PATCH v3 3/11 dt-bindings: interrupt-controller: add SpacemiT K3 APLIC

In reply to Guodong Xu

Add compatible string for SpacemiT K3 APLIC.

---
v3: No change.
v2: Add Conor's Acked-by.

---
 Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml +1 -0
index bef00521d5dacc002d24c50843ebe6380a7d5524..0718071444d29fbfa36283fc9666e8cecd6f77e7 100644
@@ -28,6 +28,7 @@ properties:
     items:
       - enum:
           - qemu,aplic
+          - spacemit,k3-aplic
       - const: riscv,aplic
 
   reg:
Signature · 1 line
2.43.0
author
#5 lore raw

PATCH v3 4/11 dt-bindings: interrupt-controller: add SpacemiT K3 IMSIC

In reply to Guodong Xu

Add compatible string for SpacemiT K3 IMSIC.

---
v3: Add Acked-by from Krzysztof.
v2: Fix the order to keep things alphabetically.

---
 Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml +1 -0
index c23b5c09fdb90baccece03708f4a381084b22049..feec122bddde1f82cbd29b8f3597d6af1a16cb23 100644
@@ -48,6 +48,7 @@ properties:
     items:
       - enum:
           - qemu,imsics
+          - spacemit,k3-imsics
       - const: riscv,imsics
 
   reg:
Signature · 1 line
2.43.0
author
#6 lore raw

PATCH v3 5/11 dt-bindings: riscv: spacemit: add K3 and Pico-ITX board bindings

In reply to Guodong Xu

Add DT binding documentation for the SpacemiT K3 SoC and the board Pico-ITX which is a 2.5-inch single-board computer.

---
v3: No change.
v2: Use one-blank-space between name and email address.

---
 Documentation/devicetree/bindings/riscv/spacemit.yaml | 4 ++++
 1 file changed, 4 insertions(+)
Documentation/devicetree/bindings/riscv/spacemit.yaml +4 -0
index 9c49482002f768cd0cc59be6db02659a43fa31ce..fe62971c9d1f4a7470eabc0e84e8a747f84baf0d 100644
@@ -9,6 +9,7 @@ title: SpacemiT SoC-based boards
 maintainers:
   - Yangyu Chen <[email protected]>
   - Yixun Lan <[email protected]>
+  - Guodong Xu <[email protected]>
 
 description:
   SpacemiT SoC-based boards
@@ -26,6 +27,9 @@ properties:
               - xunlong,orangepi-r2s
               - xunlong,orangepi-rv2
           - const: spacemit,k1
+      - items:
+          - const: spacemit,k3-pico-itx
+          - const: spacemit,k3
 
 additionalProperties: true
 
Signature · 1 line
2.43.0
#7 lore raw

Re: [PATCH v3 05/11] dt-bindings: riscv: spacemit: add K3 and Pico-ITX board bindings

Hi Guodong,

Quoted 16 lines · Guodong Xu

Add DT binding documentation for the SpacemiT K3 SoC and the board Pico-ITX which is a 2.5-inch single-board computer.

---
v3: No change.
v2: Use one-blank-space between name and email address.

---
 Documentation/devicetree/bindings/riscv/spacemit.yaml | 4 ++++
 1 file changed, 4 insertions(+)
Documentation/devicetree/bindings/riscv/spacemit.yaml +0 -0
index 9c49482002f768cd0cc59be6db02659a43fa31ce..fe62971c9d1f4a7470eabc0e84e8a747f84baf0d 100644

Documentation/devicetree/bindings/riscv/spacemit.yaml title: SpacemiT SoC-based boards · line 13

Quoted 5 lines
Documentation/devicetree/bindings/riscv/spacemit.yaml +1 -0
@@ -9,6 +9,7 @@ title: SpacemiT SoC-based boards
 maintainers:
   - Yangyu Chen <[email protected]>
   - Yixun Lan <[email protected]>
+  - Guodong Xu <[email protected]>
 

sort by alphabet letter of first name?

Quoted 7 lines
Documentation/devicetree/bindings/riscv/spacemit.yaml +1 -0
 description:
   SpacemiT SoC-based boards
@@ -26,6 +27,9 @@ properties:
               - xunlong,orangepi-r2s
               - xunlong,orangepi-rv2
           - const: spacemit,k1
+      - items:

..

Quoted 1 line

+ - const: spacemit,k3-pico-itx

if DT mainainer has no objection, I'd suggest to change to enum
- enum:
- spacemit,k3-pico-itx

although single enum is effectively equivalent to const, but easy for adding more boards in future (no change to previous code)..

Quoted 8 lines

+ - const: spacemit,k3

additionalProperties: true

Signature · 1 line
2.43.0
Signature · 1 line
Yixun Lan (dlan)
author
#8 lore raw

Re: [PATCH v3 05/11] dt-bindings: riscv: spacemit: add K3 and Pico-ITX board bindings

Hi, Yixun

Quoted 15 lines · Yixun Lan

Hi Guodong,

Quoted 11 lines · Guodong Xu

Add DT binding documentation for the SpacemiT K3 SoC and the board Pico-ITX which is a 2.5-inch single-board computer.

---
v3: No change.
v2: Use one-blank-space between name and email address.

---
 Documentation/devicetree/bindings/riscv/spacemit.yaml | 4 ++++
 1 file changed, 4 insertions(+)
Quoted 11 lines

Documentation/devicetree/bindings/riscv/spacemit.yaml title: SpacemiT SoC-based boards · line 13

Quoted 10 lines
Documentation/devicetree/bindings/riscv/spacemit.yaml +1 -0
index 9c49482002f768cd0cc59be6db02659a43fa31ce..fe62971c9d1f4a7470eabc0e84e8a747f84baf0d 100644
@@ -9,6 +9,7 @@ title: SpacemiT SoC-based boards
 maintainers:
   - Yangyu Chen <[email protected]>
   - Yixun Lan <[email protected]>
+  - Guodong Xu <[email protected]>
 

sort by alphabet letter of first name?

Thanks for the review comments.
Sure, I can do that.

Quoted 9 lines
Quoted 8 lines
Documentation/devicetree/bindings/riscv/spacemit.yaml +1 -0
 description:
   SpacemiT SoC-based boards
@@ -26,6 +27,9 @@ properties:
               - xunlong,orangepi-r2s
               - xunlong,orangepi-rv2
           - const: spacemit,k1
+      - items:

..

Quoted 8 lines
Quoted 1 line

+ - const: spacemit,k3-pico-itx

if DT mainainer has no objection, I'd suggest to change to enum
- enum:
- spacemit,k3-pico-itx

although single enum is effectively equivalent to const, but easy for adding more boards in future (no change to previous code)..

Ok, I see your point. I can find there are other yaml files doing the same style. If no other objection, I will change it to enum in next version.

BR,
Guodong Xu

Quoted 11 lines
Quoted 8 lines

+ - const: spacemit,k3

additionalProperties: true

--
2.43.0

--
Yixun Lan (dlan)

author
#9 lore raw

PATCH v3 6/11 dt-bindings: riscv: Add B ISA extension description

In reply to Guodong Xu

Add description of the single-letter B extennsion for Bit Manipulation. B is mandatory for RVA23U64.

The B extension is ratified in the 20240411 version of the unprivileged ISA specification. According to the ratified spec, the B standard extension comprises instructions provided by the Zba, Zbb, and Zbs extensions.

Add two-way dependency check to enforce that B implies Zba/Zbb/Zbs; and when Zba/Zbb/Zbs (all of them) are specified, then B must be added too.

The reason why B/Zba/Zbb/Zbs must coexist at the same time is that unlike other single-letter extensions, B was ratified (Apr/2024) much later than its component extensions Zba/Zbb/Zbs (Jun/2021).

When "b" is specified, zba/zbb/zbs must also be present to ensure backward compatibility with existing software and kernels that only look for the explicit component strings.

When all three components zba/zbb/zbs are specified, "b" should also be present. Making "b" mandatory when all three components are present.

Existing devicetrees with zba/zbb/zbs but without "b" will generate warnings that can be fixed in follow-up patches.

---
v3: Update the commit message to explain the retionale why B and
Zba/Zbb/Zbs should all exist in DT.
v2: New patch.

---
 .../devicetree/bindings/riscv/extensions.yaml      | 31 ++++++++++++++++++++++
 1 file changed, 31 insertions(+)
Documentation/devicetree/bindings/riscv/extensions.yaml +31 -0
index 5bab356addc848abf8240991ff525c619b9fc0dc..e026b366c8f5dbe7d6988d3ed374183c165de35a 100644
@@ -109,6 +109,13 @@ properties:
             The standard C extension for compressed instructions, as ratified in
             the 20191213 version of the unprivileged ISA specification.
 
+        - const: b
+          description:
+            The standard B extension for bit manipulation instructions, as
+            ratified in the 20240411 version of the unprivileged ISA
+            specification. The B standard extension comprises instructions
+            provided by the Zba, Zbb, and Zbs extensions.
+
         - const: v
           description:
             The standard V extension for vector operations, as ratified
@@ -749,6 +756,30 @@ properties:
         then:
           contains:
             const: f
+      # B comprises Zba, Zbb, and Zbs
+      - if:
+          contains:
+            const: b
+        then:
+          allOf:
+            - contains:
+                const: zba
+            - contains:
+                const: zbb
+            - contains:
+                const: zbs
+      # Zba, Zbb, Zbs together require B
+      - if:
+          allOf:
+            - contains:
+                const: zba
+            - contains:
+                const: zbb
+            - contains:
+                const: zbs
+        then:
+          contains:
+            const: b
       # Zcb depends on Zca
       - if:
           contains:
Signature · 1 line
2.43.0
author
#10 lore raw

PATCH v3 7/11 dt-bindings: riscv: Add descriptions for Za64rs, Ziccamoa, Ziccif, and Zicclsm

In reply to Guodong Xu

Add descriptions for four extensions: Za64rs, Ziccamoa, Ziccif, and Zicclsm. These extensions are ratified in RISC-V Profiles Version 1.0 (commit b1d806605f87 "Updated to ratified state.").

They are introduced as new extension names for existing features and regulate implementation details for RISC-V Profile compliance. According to RISC-V Profiles Version 1.0 and RVA23 Profiles Version 1.0, they are mandatory for the following profiles:

- za64rs: Mandatory in RVA22U64, RVA23U64
- ziccamoa: Mandatory in RVA20U64, RVA22U64, RVA23U64
- ziccif: Mandatory in RVA20U64, RVA22U64, RVA23U64
- zicclsm: Mandatory in RVA20U64, RVA22U64, RVA23U64

Ziccrse specifies the main memory must support "RsrvEventual", which is one (totally there are four) of the support level for Load-Reserved/ Store-Conditional (LR/SC) atomic instructions. Thus it depends on Zalrsc.

Ziccamoa specifies the main memory must support AMOArithmetic, among the four levels of PMA support defined for AMOs in the A extension. Thus it depends on Zaamo.

Za64rs defines reservation sets are contiguous, naturally aligned, and a maximum of 64 bytes. Za64rs is consumed by two extensions: Zalrsc and Zawrs. Zawrs itself depends on Zalrsc too.

Based on the relationship that "A" = Zaamo + Zalrsc, add the following dependencies checks:
Za64rs -> Zalrsc or A
Ziccrse -> Zalrsc or A
Ziccamoa -> Zaamo or A

---
v3: Update the commit message to explain the relationship of Za64rs,
Ziccrse, Ziccamoa, Zalrsc and A.
Add dependency checks.
v2: New patch.

---
 .../devicetree/bindings/riscv/extensions.yaml      | 49 ++++++++++++++++++++++
 1 file changed, 49 insertions(+)
Documentation/devicetree/bindings/riscv/extensions.yaml +49 -0
index e026b366c8f5dbe7d6988d3ed374183c165de35a..ee2cdd3856b91a5bbf486e8a2da0986269e82a2b 100644
@@ -237,6 +237,12 @@ properties:
             as ratified at commit 4a69197e5617 ("Update to ratified state") of
             riscv-svvptc.
 
+        - const: za64rs
+          description:
+            The standard Za64rs extension for reservation set size of at most
+            64 bytes, as ratified in RISC-V Profiles Version 1.0, with commit
+            b1d806605f87 ("Updated to ratified state.")
+
         - const: zaamo
           description: |
             The standard Zaamo extension for atomic memory operations as
@@ -378,6 +384,27 @@ properties:
             in commit 64074bc ("Update version numbers for Zfh/Zfinx") of
             riscv-isa-manual.
 
+        - const: ziccamoa
+          description:
+            The standard Ziccamoa extension for main memory (cacheability and
+            coherence) must support all atomics in A, as ratified in RISC-V
+            Profiles Version 1.0, with commit b1d806605f87 ("Updated to
+            ratified state.")
+
+        - const: ziccif
+          description:
+            The standard Ziccif extension for main memory (cacheability and
+            coherence) instruction fetch atomicity, as ratified in RISC-V
+            Profiles Version 1.0, with commit b1d806605f87 ("Updated to
+            ratified state.")
+
+        - const: zicclsm
+          description:
+            The standard Zicclsm extension for main memory (cacheability and
+            coherence) must support misaligned loads and stores, as ratified
+            in RISC-V Profiles Version 1.0, with commit b1d806605f87 ("Updated
+            to ratified state.")
+
         - const: ziccrse
           description:
             The standard Ziccrse extension which provides forward progress
@@ -780,6 +807,18 @@ properties:
         then:
           contains:
             const: b
+      # Za64rs and Ziccrse depend on Zalrsc or A
+      - if:
+          contains:
+            anyOf:
+              - const: za64rs
+              - const: ziccrse
+        then:
+          oneOf:
+            - contains:
+                const: zalrsc
+            - contains:
+                const: a
       # Zcb depends on Zca
       - if:
           contains:
@@ -821,6 +860,16 @@ properties:
         then:
           contains:
             const: f
+      # Ziccamoa depends on Zaamo or A
+      - if:
+          contains:
+            const: ziccamoa
+        then:
+          oneOf:
+            - contains:
+                const: zaamo
+            - contains:
+                const: a
       # Zvfbfmin depends on V or Zve32f
       - if:
           contains:
Signature · 1 line
2.43.0
author
#11 lore raw

PATCH v3 8/11 dt-bindings: riscv: Add Ssccptr, Sscounterenw, Sstvala, Sstvecd, Ssu64xl

In reply to Guodong Xu

Add descriptions for five new extensions: Ssccptr, Sscounterenw, Sstvala, Sstvecd, and Ssu64xl. These extensions are ratified in RISC-V Profiles Version 1.0 (commit b1d806605f87 "Updated to ratified state.").

They are introduced as new extension names for existing features and regulate implementation details for RISC-V Profile compliance. According to RISC-V Profiles Version 1.0 and RVA23 Profiles Version 1.0, their requirement status are:

- Ssccptr: Mandatory in RVA20S64, RVA22S64, RVA23S64
- Sscounterenw: Mandatory in RVA22S64, RVA23S64
- Sstvala: Mandatory in RVA20S64, RVA22S64, RVA23S64
- Sstvecd: Mandatory in RVA20S64, RVA22S64, RVA23S64
- Ssu64xl: Optional in RVA20S64, RVA22S64; Mandatory in RVA23S64

---
v3: No change.
v2: New patch.

---
 .../devicetree/bindings/riscv/extensions.yaml      | 32 ++++++++++++++++++++++
 1 file changed, 32 insertions(+)
Documentation/devicetree/bindings/riscv/extensions.yaml +32 -0
index ee2cdd3856b91a5bbf486e8a2da0986269e82a2b..78b75ab0a473b60508f72fc30d4809a797a2c40a 100644
@@ -160,12 +160,26 @@ properties:
             behavioural changes to interrupts as frozen at commit ccbddab
             ("Merge pull request #42 from riscv/jhauser-2023-RC4") of riscv-aia.
 
+        - const: ssccptr
+          description: |
+            The standard Ssccptr extension for main memory (cacheability and
+            coherence) hardware page-table reads, as ratified in RISC-V
+            Profiles Version 1.0, with commit b1d806605f87 ("Updated to
+            ratified state.")
+
         - const: sscofpmf
           description: |
             The standard Sscofpmf supervisor-level extension for count overflow
             and mode-based filtering as ratified at commit 01d1df0 ("Add ability
             to manually trigger workflow. (#2)") of riscv-count-overflow.
 
+        - const: sscounterenw
+          description: |
+            The standard Sscounterenw extension for support writable enables
+            in scounteren for any supported counter, as ratified in RISC-V
+            Profiles Version 1.0, with commit b1d806605f87 ("Updated to
+            ratified state.")
+
         - const: ssnpm
           description: |
             The standard Ssnpm extension for next-mode pointer masking as
@@ -178,6 +192,24 @@ properties:
             ratified at commit 3f9ed34 ("Add ability to manually trigger
             workflow. (#2)") of riscv-time-compare.
 
+        - const: sstvala
+          description: |
+            The standard Sstvala extension for stval provides all needed values
+            as ratified in RISC-V Profiles Version 1.0, with commit b1d806605f87
+            ("Updated to ratified state.")
+
+        - const: sstvecd
+          description: |
+            The standard Sstvecd extension for stvec supports Direct mode as
+            ratified in RISC-V Profiles Version 1.0, with commit b1d806605f87
+            ("Updated to ratified state.")
+
+        - const: ssu64xl
+          description: |
+            The standard Ssu64xl extension for UXLEN=64 must be supported, as
+            ratified in RISC-V Profiles Version 1.0, with commit b1d806605f87
+            ("Updated to ratified state.")
+
         - const: svade
           description: |
             The standard Svade supervisor-level extension for SW-managed PTE A/D
Signature · 1 line
2.43.0
author
#12 lore raw

PATCH v3 9/11 dt-bindings: riscv: Add Sha and its comprised extensions

In reply to Guodong Xu

Add descriptions for the Sha extension and the seven extensions it
comprises: Shcounterenw, Shgatpa, Shtvala, Shvsatpa, Shvstvala, Shvstvecd, and Ssstateen.

Sha is ratified in the RVA23 Profiles Version 1.0 (commit 0273f3c921b6 "rva23/rvb23 ratified") as a new profile-defined extension that captures the full set of features that are mandated to be supported along with the H extension.

Extensions Shcounterenw, Shgatpa, Shtvala, Shvsatpa, Shvstvala, Shvstvecd, and Ssstateen are ratified in the RISC-V Profiles Version 1.0 (commit b1d806605f87 "Updated to ratified state").

The requirement status for Sha and its comprised extension in RISC-V Profiles are:
- Sha: Mandatory in RVA23S64
- H: Optional in RVA22S64; Mandatory in RVA23S64
- Shcounterenw: Optional in RVA22S64; Mandatory in RVA23S64
- Shgatpa: Optional in RVA22S64; Mandatory in RVA23S64
- Shtvala: Optional in RVA22S64; Mandatory in RVA23S64
- Shvsatpa: Optional in RVA22S64; Mandatory in RVA23S64
- Shvstvala: Optional in RVA22S64; Mandatory in RVA23S64
- Shvstvecd: Optional in RVA22S64; Mandatory in RVA23S64
- Ssstateen: Optional in RVA22S64; Mandatory in RVA23S64

---
v3: Drop dependency check for Sha. Both Sha and the extensions it
implies are allowed to co-exist in DT.
v2: New patch.

---
 .../devicetree/bindings/riscv/extensions.yaml      | 57 ++++++++++++++++++++++
 1 file changed, 57 insertions(+)
Documentation/devicetree/bindings/riscv/extensions.yaml +57 -0
index 78b75ab0a473b60508f72fc30d4809a797a2c40a..839f48503f8246864495f7cda93a572b01351b0c 100644
@@ -128,6 +128,57 @@ properties:
             version of the privileged ISA specification.
 
         # multi-letter extensions, sorted alphanumerically
+        - const: sha
+          description: |
+            The standard Sha extension for augmented hypervisor extension as
+            ratified in RVA23 Profiles Version 1.0, with commit 0273f3c921b6
+            ("rva23/rvb23 ratified").
+
+            Sha captures the full set of features that are mandated to be
+            supported along with the H extension. Sha comprises the following
+            extensions: H, Shcounterenw, Shgatpa, Shtvala, Shvsatpa, Shvstvala,
+            Shvstvecd, and Ssstateen.
+
+        - const: shcounterenw
+          description: |
+            The standard Shcounterenw extension for support writable enables
+            in hcounteren for any supported counter, as ratified in RISC-V
+            Profiles Version 1.0, with commit b1d806605f87 ("Updated to
+            ratified state.")
+
+        - const: shgatpa
+          description: |
+            The standard Shgatpa extension indicates that for each supported
+            virtual memory scheme SvNN supported in satp, the corresponding
+            hgatp SvNNx4 mode must be supported. The hgatp mode Bare must
+            also be supported. It is ratified in RISC-V Profiles Version 1.0,
+            with commit b1d806605f87 ("Updated to ratified state.")
+
+        - const: shtvala
+          description: |
+            The standard Shtvala extension for htval be written with the
+            faulting guest physical address in all circumstances permitted by
+            the ISA. It is ratified in RISC-V Profiles Version 1.0, with
+            commit b1d806605f87 ("Updated to ratified state.")
+
+        - const: shvsatpa
+          description: |
+            The standard Shvsatpa extension for vsatp supporting all translation
+            modes supported in satp, as ratified in RISC-V Profiles Version 1.0,
+            with commit b1d806605f87 ("Updated to ratified state.")
+
+        - const: shvstvala
+          description: |
+            The standard Shvstvala extension for vstval provides all needed
+            values as ratified in RISC-V Profiles Version 1.0, with commit
+            b1d806605f87 ("Updated to ratified state.")
+
+        - const: shvstvecd
+          description: |
+            The standard Shvstvecd extension for vstvec supporting Direct mode,
+            as ratified in RISC-V Profiles Version 1.0, with commit b1d806605f87
+            ("Updated to ratified state.")
+
         - const: smaia
           description: |
             The standard Smaia supervisor-level extension for the advanced
@@ -186,6 +237,12 @@ properties:
             ratified at commit d70011dde6c2 ("Update to ratified state")
             of riscv-j-extension.
 
+        - const: ssstateen
+          description: |
+            The standard Ssstateen extension for supervisor-mode view of the
+            state-enable extension, as ratified in RISC-V Profiles Version 1.0,
+            with commit b1d806605f87 ("Updated to ratified state.")
+
         - const: sstc
           description: |
             The standard Sstc supervisor-level extension for time compare as
Signature · 1 line
2.43.0
author
#13 lore raw

PATCH v3 10/11 riscv: dts: spacemit: add initial device tree of SpacemiT K3 SoC

In reply to Guodong Xu

SpacemiT K3 is equipped with 8 X100 cores, which are RVA23 compliant. Add nodes of uarts, timer and interrupt-controllers.

---
v3: Remove "supm" from the riscv,isa-extensions list.
v2: Remove aliases from k3.dtsi, they should be in board DTS.
Updated riscv,isa-extensions with new extensions from the extensions.yaml

---
 arch/riscv/boot/dts/spacemit/k3.dtsi | 548 +++++++++++++++++++++++++++++++++++
 1 file changed, 548 insertions(+)
arch/riscv/boot/dts/spacemit/k3.dtsi new file +548 -0
new file mode 100644
index 0000000000000000000000000000000000000000..be9335fba32cb9e81915b2b91cf08c55a5e96809
@@ -0,0 +1,548 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2025 SpacemiT (Hangzhou) Technology Co. Ltd
+ * Copyright (c) 2025 Guodong Xu <[email protected]>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "SpacemiT K3";
+	compatible = "spacemit,k3";
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		timebase-frequency = <24000000>;
+
+		cpu_0: cpu@0 {
+			compatible = "spacemit,x100", "riscv";
+			device_type = "cpu";
+			reg = <0>;
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "b", "v", "h",
+					       "sha", "shcounterenw", "shgatpa", "shtvala",
+					       "shvsatpa", "shvstvala", "shvstvecd", "smaia",
+					       "smstateen", "ssaia", "ssccptr", "sscofpmf",
+					       "sscounterenw", "ssnpm", "ssstateen", "sstc",
+					       "sstvala", "sstvecd", "ssu64xl", "svade",
+					       "svinval", "svnapot", "svpbmt", "za64rs",
+					       "zawrs", "zba", "zbb", "zbc", "zbs", "zca",
+					       "zcb", "zcd", "zcmop", "zfa", "zfbfmin",
+					       "zfh", "zfhmin", "zicbom", "zicbop", "zicboz",
+					       "ziccamoa", "ziccif", "zicclsm", "zicntr",
+					       "zicond", "zicsr", "zifencei", "zihintntl",
+					       "zihintpause", "zihpm", "zimop", "zkt", "zvbb",
+					       "zvbc", "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin", "zvkb", "zvkg", "zvkn", "zvknc",
+					       "zvkned", "zvkng", "zvknha", "zvknhb", "zvks",
+					       "zvksc", "zvksed", "zvksg", "zvksh", "zvkt";
+			riscv,cbom-block-size = <64>;
+			riscv,cbop-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <256>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache0>;
+			mmu-type = "riscv,sv39";
+
+			cpu0_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		cpu_1: cpu@1 {
+			compatible = "spacemit,x100", "riscv";
+			device_type = "cpu";
+			reg = <1>;
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "b", "v", "h",
+					       "sha", "shcounterenw", "shgatpa", "shtvala",
+					       "shvsatpa", "shvstvala", "shvstvecd", "smaia",
+					       "smstateen", "ssaia", "ssccptr", "sscofpmf",
+					       "sscounterenw", "ssnpm", "ssstateen", "sstc",
+					       "sstvala", "sstvecd", "ssu64xl", "svade",
+					       "svinval", "svnapot", "svpbmt", "za64rs",
+					       "zawrs", "zba", "zbb", "zbc", "zbs", "zca",
+					       "zcb", "zcd", "zcmop", "zfa", "zfbfmin",
+					       "zfh", "zfhmin", "zicbom", "zicbop", "zicboz",
+					       "ziccamoa", "ziccif", "zicclsm", "zicntr",
+					       "zicond", "zicsr", "zifencei", "zihintntl",
+					       "zihintpause", "zihpm", "zimop", "zkt", "zvbb",
+					       "zvbc", "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin", "zvkb", "zvkg", "zvkn", "zvknc",
+					       "zvkned", "zvkng", "zvknha", "zvknhb", "zvks",
+					       "zvksc", "zvksed", "zvksg", "zvksh", "zvkt";
+			riscv,cbom-block-size = <64>;
+			riscv,cbop-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <256>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache0>;
+			mmu-type = "riscv,sv39";
+
+			cpu1_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		cpu_2: cpu@2 {
+			compatible = "spacemit,x100", "riscv";
+			device_type = "cpu";
+			reg = <2>;
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "b", "v", "h",
+					       "sha", "shcounterenw", "shgatpa", "shtvala",
+					       "shvsatpa", "shvstvala", "shvstvecd", "smaia",
+					       "smstateen", "ssaia", "ssccptr", "sscofpmf",
+					       "sscounterenw", "ssnpm", "ssstateen", "sstc",
+					       "sstvala", "sstvecd", "ssu64xl", "svade",
+					       "svinval", "svnapot", "svpbmt", "za64rs",
+					       "zawrs", "zba", "zbb", "zbc", "zbs", "zca",
+					       "zcb", "zcd", "zcmop", "zfa", "zfbfmin",
+					       "zfh", "zfhmin", "zicbom", "zicbop", "zicboz",
+					       "ziccamoa", "ziccif", "zicclsm", "zicntr",
+					       "zicond", "zicsr", "zifencei", "zihintntl",
+					       "zihintpause", "zihpm", "zimop", "zkt", "zvbb",
+					       "zvbc", "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin", "zvkb", "zvkg", "zvkn", "zvknc",
+					       "zvkned", "zvkng", "zvknha", "zvknhb", "zvks",
+					       "zvksc", "zvksed", "zvksg", "zvksh", "zvkt";
+			riscv,cbom-block-size = <64>;
+			riscv,cbop-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <256>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache0>;
+			mmu-type = "riscv,sv39";
+
+			cpu2_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		cpu_3: cpu@3 {
+			compatible = "spacemit,x100", "riscv";
+			device_type = "cpu";
+			reg = <3>;
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "b", "v", "h",
+					       "sha", "shcounterenw", "shgatpa", "shtvala",
+					       "shvsatpa", "shvstvala", "shvstvecd", "smaia",
+					       "smstateen", "ssaia", "ssccptr", "sscofpmf",
+					       "sscounterenw", "ssnpm", "ssstateen", "sstc",
+					       "sstvala", "sstvecd", "ssu64xl", "svade",
+					       "svinval", "svnapot", "svpbmt", "za64rs",
+					       "zawrs", "zba", "zbb", "zbc", "zbs", "zca",
+					       "zcb", "zcd", "zcmop", "zfa", "zfbfmin",
+					       "zfh", "zfhmin", "zicbom", "zicbop", "zicboz",
+					       "ziccamoa", "ziccif", "zicclsm", "zicntr",
+					       "zicond", "zicsr", "zifencei", "zihintntl",
+					       "zihintpause", "zihpm", "zimop", "zkt", "zvbb",
+					       "zvbc", "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin", "zvkb", "zvkg", "zvkn", "zvknc",
+					       "zvkned", "zvkng", "zvknha", "zvknhb", "zvks",
+					       "zvksc", "zvksed", "zvksg", "zvksh", "zvkt";
+			riscv,cbom-block-size = <64>;
+			riscv,cbop-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <256>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache0>;
+			mmu-type = "riscv,sv39";
+
+			cpu3_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		cpu_4: cpu@4 {
+			compatible = "spacemit,x100", "riscv";
+			device_type = "cpu";
+			reg = <4>;
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "b", "v", "h",
+					       "sha", "shcounterenw", "shgatpa", "shtvala",
+					       "shvsatpa", "shvstvala", "shvstvecd", "smaia",
+					       "smstateen", "ssaia", "ssccptr", "sscofpmf",
+					       "sscounterenw", "ssnpm", "ssstateen", "sstc",
+					       "sstvala", "sstvecd", "ssu64xl", "svade",
+					       "svinval", "svnapot", "svpbmt", "za64rs",
+					       "zawrs", "zba", "zbb", "zbc", "zbs", "zca",
+					       "zcb", "zcd", "zcmop", "zfa", "zfbfmin",
+					       "zfh", "zfhmin", "zicbom", "zicbop", "zicboz",
+					       "ziccamoa", "ziccif", "zicclsm", "zicntr",
+					       "zicond", "zicsr", "zifencei", "zihintntl",
+					       "zihintpause", "zihpm", "zimop", "zkt", "zvbb",
+					       "zvbc", "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin", "zvkb", "zvkg", "zvkn", "zvknc",
+					       "zvkned", "zvkng", "zvknha", "zvknhb", "zvks",
+					       "zvksc", "zvksed", "zvksg", "zvksh", "zvkt";
+			riscv,cbom-block-size = <64>;
+			riscv,cbop-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <256>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache1>;
+			mmu-type = "riscv,sv39";
+
+			cpu4_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		cpu_5: cpu@5 {
+			compatible = "spacemit,x100", "riscv";
+			device_type = "cpu";
+			reg = <5>;
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "b", "v", "h",
+					       "sha", "shcounterenw", "shgatpa", "shtvala",
+					       "shvsatpa", "shvstvala", "shvstvecd", "smaia",
+					       "smstateen", "ssaia", "ssccptr", "sscofpmf",
+					       "sscounterenw", "ssnpm", "ssstateen", "sstc",
+					       "sstvala", "sstvecd", "ssu64xl", "svade",
+					       "svinval", "svnapot", "svpbmt", "za64rs",
+					       "zawrs", "zba", "zbb", "zbc", "zbs", "zca",
+					       "zcb", "zcd", "zcmop", "zfa", "zfbfmin",
+					       "zfh", "zfhmin", "zicbom", "zicbop", "zicboz",
+					       "ziccamoa", "ziccif", "zicclsm", "zicntr",
+					       "zicond", "zicsr", "zifencei", "zihintntl",
+					       "zihintpause", "zihpm", "zimop", "zkt", "zvbb",
+					       "zvbc", "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin", "zvkb", "zvkg", "zvkn", "zvknc",
+					       "zvkned", "zvkng", "zvknha", "zvknhb", "zvks",
+					       "zvksc", "zvksed", "zvksg", "zvksh", "zvkt";
+			riscv,cbom-block-size = <64>;
+			riscv,cbop-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <256>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache1>;
+			mmu-type = "riscv,sv39";
+
+			cpu5_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		cpu_6: cpu@6 {
+			compatible = "spacemit,x100", "riscv";
+			device_type = "cpu";
+			reg = <6>;
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "b", "v", "h",
+					       "sha", "shcounterenw", "shgatpa", "shtvala",
+					       "shvsatpa", "shvstvala", "shvstvecd", "smaia",
+					       "smstateen", "ssaia", "ssccptr", "sscofpmf",
+					       "sscounterenw", "ssnpm", "ssstateen", "sstc",
+					       "sstvala", "sstvecd", "ssu64xl", "svade",
+					       "svinval", "svnapot", "svpbmt", "za64rs",
+					       "zawrs", "zba", "zbb", "zbc", "zbs", "zca",
+					       "zcb", "zcd", "zcmop", "zfa", "zfbfmin",
+					       "zfh", "zfhmin", "zicbom", "zicbop", "zicboz",
+					       "ziccamoa", "ziccif", "zicclsm", "zicntr",
+					       "zicond", "zicsr", "zifencei", "zihintntl",
+					       "zihintpause", "zihpm", "zimop", "zkt", "zvbb",
+					       "zvbc", "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin", "zvkb", "zvkg", "zvkn", "zvknc",
+					       "zvkned", "zvkng", "zvknha", "zvknhb", "zvks",
+					       "zvksc", "zvksed", "zvksg", "zvksh", "zvkt";
+			riscv,cbom-block-size = <64>;
+			riscv,cbop-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <256>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache1>;
+			mmu-type = "riscv,sv39";
+
+			cpu6_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		cpu_7: cpu@7 {
+			compatible = "spacemit,x100", "riscv";
+			device_type = "cpu";
+			reg = <7>;
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "b", "v", "h",
+					       "sha", "shcounterenw", "shgatpa", "shtvala",
+					       "shvsatpa", "shvstvala", "shvstvecd", "smaia",
+					       "smstateen", "ssaia", "ssccptr", "sscofpmf",
+					       "sscounterenw", "ssnpm", "ssstateen", "sstc",
+					       "sstvala", "sstvecd", "ssu64xl", "svade",
+					       "svinval", "svnapot", "svpbmt", "za64rs",
+					       "zawrs", "zba", "zbb", "zbc", "zbs", "zca",
+					       "zcb", "zcd", "zcmop", "zfa", "zfbfmin",
+					       "zfh", "zfhmin", "zicbom", "zicbop", "zicboz",
+					       "ziccamoa", "ziccif", "zicclsm", "zicntr",
+					       "zicond", "zicsr", "zifencei", "zihintntl",
+					       "zihintpause", "zihpm", "zimop", "zkt", "zvbb",
+					       "zvbc", "zvfbfmin", "zvfbfwma", "zvfh",
+					       "zvfhmin", "zvkb", "zvkg", "zvkn", "zvknc",
+					       "zvkned", "zvkng", "zvknha", "zvknhb", "zvks",
+					       "zvksc", "zvksed", "zvksg", "zvksh", "zvkt";
+			riscv,cbom-block-size = <64>;
+			riscv,cbop-block-size = <64>;
+			riscv,cboz-block-size = <64>;
+			i-cache-block-size = <64>;
+			i-cache-size = <65536>;
+			i-cache-sets = <256>;
+			d-cache-block-size = <64>;
+			d-cache-size = <65536>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache1>;
+			mmu-type = "riscv,sv39";
+
+			cpu7_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		l2_cache0: cache-controller-0 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-size = <4194304>;
+			cache-sets = <4096>;
+			cache-unified;
+		};
+
+		l2_cache1: cache-controller-1 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-size = <4194304>;
+			cache-sets = <4096>;
+			cache-unified;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_0>;
+				};
+				core1 {
+					cpu = <&cpu_1>;
+				};
+				core2 {
+					cpu = <&cpu_2>;
+				};
+				core3 {
+					cpu = <&cpu_3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu_4>;
+				};
+				core1 {
+					cpu = <&cpu_5>;
+				};
+				core2 {
+					cpu = <&cpu_6>;
+				};
+				core3 {
+					cpu = <&cpu_7>;
+				};
+			};
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&saplic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-noncoherent;
+		ranges;
+
+		uart0: serial@d4017000 {
+			compatible = "spacemit,k3-uart", "intel,xscale-uart";
+			reg = <0x0 0xd4017000 0x0 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <14700000>;
+			interrupts = <42 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart2: serial@d4017100 {
+			compatible = "spacemit,k3-uart", "intel,xscale-uart";
+			reg = <0x0 0xd4017100 0x0 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <14700000>;
+			interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart3: serial@d4017200 {
+			compatible = "spacemit,k3-uart", "intel,xscale-uart";
+			reg = <0x0 0xd4017200 0x0 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <14700000>;
+			interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart4: serial@d4017300 {
+			compatible = "spacemit,k3-uart", "intel,xscale-uart";
+			reg = <0x0 0xd4017300 0x0 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <14700000>;
+			interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart5: serial@d4017400 {
+			compatible = "spacemit,k3-uart", "intel,xscale-uart";
+			reg = <0x0 0xd4017400 0x0 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <14700000>;
+			interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart6: serial@d4017500 {
+			compatible = "spacemit,k3-uart", "intel,xscale-uart";
+			reg = <0x0 0xd4017500 0x0 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <14700000>;
+			interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart7: serial@d4017600 {
+			compatible = "spacemit,k3-uart", "intel,xscale-uart";
+			reg = <0x0 0xd4017600 0x0 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <14700000>;
+			interrupts = <49 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart8: serial@d4017700 {
+			compatible = "spacemit,k3-uart", "intel,xscale-uart";
+			reg = <0x0 0xd4017700 0x0 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <14700000>;
+			interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart9: serial@d4017800 {
+			compatible = "spacemit,k3-uart", "intel,xscale-uart";
+			reg = <0x0 0xd4017800 0x0 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <14700000>;
+			interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart10: serial@d401f000 {
+			compatible = "spacemit,k3-uart", "intel,xscale-uart";
+			reg = <0x0 0xd401f000 0x0 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <14700000>;
+			interrupts = <281 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		simsic: interrupt-controller@e0400000 {
+			compatible = "spacemit,k3-imsics","riscv,imsics";
+			reg = <0x0 0xe0400000 0x0 0x00200000>;
+			interrupt-controller;
+			#interrupt-cells = <0>;
+			msi-controller;
+			#msi-cells = <0>;
+			interrupts-extended = <&cpu0_intc 9>, <&cpu1_intc 9>,
+					      <&cpu2_intc 9>, <&cpu3_intc 9>,
+					      <&cpu4_intc 9>, <&cpu5_intc 9>,
+					      <&cpu6_intc 9>, <&cpu7_intc 9>;
+			riscv,num-ids = <511>;
+			riscv,num-guest-ids = <511>;
+			riscv,hart-index-bits = <4>;
+			riscv,guest-index-bits = <6>;
+		};
+
+		saplic: interrupt-controller@e0804000 {
+			compatible = "spacemit,k3-aplic", "riscv,aplic";
+			reg = <0x0 0xe0804000 0x0 0x4000>;
+			msi-parent = <&simsic>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			riscv,num-sources = <512>;
+		};
+
+		clint: timer@e081c000 {
+			compatible = "spacemit,k3-clint", "sifive,clint0";
+			reg = <0x0 0xe081c000 0x0 0x0004000>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+					      <&cpu1_intc 3>, <&cpu1_intc 7>,
+					      <&cpu2_intc 3>, <&cpu2_intc 7>,
+					      <&cpu3_intc 3>, <&cpu3_intc 7>,
+					      <&cpu4_intc 3>, <&cpu4_intc 7>,
+					      <&cpu5_intc 3>, <&cpu5_intc 7>,
+					      <&cpu6_intc 3>, <&cpu6_intc 7>,
+					      <&cpu7_intc 3>, <&cpu7_intc 7>;
+		};
+	};
+};
Signature · 1 line
2.43.0
maintainer
#14 lore raw

Re: [PATCH v3 10/11] riscv: dts: spacemit: add initial device tree of SpacemiT K3 SoC

Quoted 17 lines · Guodong Xu

SpacemiT K3 is equipped with 8 X100 cores, which are RVA23 compliant. Add nodes of uarts, timer and interrupt-controllers.

---
v3: Remove "supm" from the riscv,isa-extensions list.
v2: Remove aliases from k3.dtsi, they should be in board DTS.
Updated riscv,isa-extensions with new extensions from the extensions.yaml

---
 arch/riscv/boot/dts/spacemit/k3.dtsi | 548 +++++++++++++++++++++++++++++++++++
 1 file changed, 548 insertions(+)
arch/riscv/boot/dts/spacemit/k3.dtsi new file +0 -0
new file mode 100644
index 0000000000000000000000000000000000000000..be9335fba32cb9e81915b2b91cf08c55a5e96809

arch/riscv/boot/dts/spacemit/k3.dtsi line 510

Quoted 4 lines
arch/riscv/boot/dts/spacemit/k3.dtsi new file +3 -0
[...]
+
+		simsic: interrupt-controller@e0400000 {
+			compatible = "spacemit,k3-imsics","riscv,imsics";

style: missing space after comma

Quoted 13 lines
arch/riscv/boot/dts/spacemit/k3.dtsi new file +13 -0
+			reg = <0x0 0xe0400000 0x0 0x00200000>;
+			interrupt-controller;
+			#interrupt-cells = <0>;
+			msi-controller;
+			#msi-cells = <0>;
+			interrupts-extended = <&cpu0_intc 9>, <&cpu1_intc 9>,
+					      <&cpu2_intc 9>, <&cpu3_intc 9>,
+					      <&cpu4_intc 9>, <&cpu5_intc 9>,
+					      <&cpu6_intc 9>, <&cpu7_intc 9>;
+			riscv,num-ids = <511>;
+			riscv,num-guest-ids = <511>;
+			riscv,hart-index-bits = <4>;
+			riscv,guest-index-bits = <6>;

arch/riscv/boot/dts/spacemit/k3.dtsi line 533

Quoted 10 lines
arch/riscv/boot/dts/spacemit/k3.dtsi new file +10 -0
+		};
+
+		saplic: interrupt-controller@e0804000 {
+			compatible = "spacemit,k3-aplic", "riscv,aplic";
+			reg = <0x0 0xe0804000 0x0 0x4000>;
+			msi-parent = <&simsic>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			riscv,num-sources = <512>;
+		};

Does the chip also have M-mode IMSIC and APLIC instances? Those need to be represented in the devicetree as well, for M-mode firmware to access them, just like the CLINT below.

Regards,
Samuel

Quoted 16 lines
arch/riscv/boot/dts/spacemit/k3.dtsi new file +15 -0
+
+		clint: timer@e081c000 {
+			compatible = "spacemit,k3-clint", "sifive,clint0";
+			reg = <0x0 0xe081c000 0x0 0x0004000>;
+			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+					      <&cpu1_intc 3>, <&cpu1_intc 7>,
+					      <&cpu2_intc 3>, <&cpu2_intc 7>,
+					      <&cpu3_intc 3>, <&cpu3_intc 7>,
+					      <&cpu4_intc 3>, <&cpu4_intc 7>,
+					      <&cpu5_intc 3>, <&cpu5_intc 7>,
+					      <&cpu6_intc 3>, <&cpu6_intc 7>,
+					      <&cpu7_intc 3>, <&cpu7_intc 7>;
+		};
+	};
+};
author
#15 lore raw

Re: [PATCH v3 10/11] riscv: dts: spacemit: add initial device tree of SpacemiT K3 SoC

Hi, Samuel

Quoted 14 lines · Samuel Holland
Quoted 12 lines · Guodong Xu

SpacemiT K3 is equipped with 8 X100 cores, which are RVA23 compliant. Add nodes of uarts, timer and interrupt-controllers.

---
v3: Remove "supm" from the riscv,isa-extensions list.
v2: Remove aliases from k3.dtsi, they should be in board DTS.
Updated riscv,isa-extensions with new extensions from the extensions.yaml

---
 arch/riscv/boot/dts/spacemit/k3.dtsi | 548 +++++++++++++++++++++++++++++++++++
 1 file changed, 548 insertions(+)
Quoted 11 lines

arch/riscv/boot/dts/spacemit/k3.dtsi line 510

Quoted 9 lines
arch/riscv/boot/dts/spacemit/k3.dtsi new file +3 -0
new file mode 100644
index 0000000000000000000000000000000000000000..be9335fba32cb9e81915b2b91cf08c55a5e96809
[...]
+
+             simsic: interrupt-controller@e0400000 {
+                     compatible = "spacemit,k3-imsics","riscv,imsics";

style: missing space after comma

Thanks, Samuel. I will fix that.

Quoted 25 lines
Quoted 14 lines
arch/riscv/boot/dts/spacemit/k3.dtsi new file +13 -0
+                     reg = <0x0 0xe0400000 0x0 0x00200000>;
+                     interrupt-controller;
+                     #interrupt-cells = <0>;
+                     msi-controller;
+                     #msi-cells = <0>;
+                     interrupts-extended = <&cpu0_intc 9>, <&cpu1_intc 9>,
+                                           <&cpu2_intc 9>, <&cpu3_intc 9>,
+                                           <&cpu4_intc 9>, <&cpu5_intc 9>,
+                                           <&cpu6_intc 9>, <&cpu7_intc 9>;
+                     riscv,num-ids = <511>;
+                     riscv,num-guest-ids = <511>;
+                     riscv,hart-index-bits = <4>;
+                     riscv,guest-index-bits = <6>;

arch/riscv/boot/dts/spacemit/k3.dtsi line 533

Quoted 10 lines
arch/riscv/boot/dts/spacemit/k3.dtsi new file +10 -0
+             };
+
+             saplic: interrupt-controller@e0804000 {
+                     compatible = "spacemit,k3-aplic", "riscv,aplic";
+                     reg = <0x0 0xe0804000 0x0 0x4000>;
+                     msi-parent = <&simsic>;
+                     #interrupt-cells = <2>;
+                     interrupt-controller;
+                     riscv,num-sources = <512>;
+             };
Quoted 3 lines

Does the chip also have M-mode IMSIC and APLIC instances? Those need to be represented in the devicetree as well, for M-mode firmware to access them, just like the CLINT below.

Yes, the K3 chip does have M-mode IMSIC and APLIC instances. Currently, the boot firmware (U-Boot) transfers information about these nodes to OpenSBI. However, you are correct that they should be properly described in the DT.

In the next version, I will add the M-mode APLIC (maplic) and IMSIC (mimsic) nodes to k3.dtsi, for topology representation and potential firmware usage. I will set their status to "disabled" because exposing them as "okay" to Linux causes access faults during driver probing.

Please let me know if this approach (adding them but keeping them disabled) looks okay to you.

Best regards,
Guodong Xu

Quoted 21 lines

Regards,
Samuel

Quoted 16 lines
arch/riscv/boot/dts/spacemit/k3.dtsi new file +15 -0
+
+             clint: timer@e081c000 {
+                     compatible = "spacemit,k3-clint", "sifive,clint0";
+                     reg = <0x0 0xe081c000 0x0 0x0004000>;
+                     interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+                                           <&cpu1_intc 3>, <&cpu1_intc 7>,
+                                           <&cpu2_intc 3>, <&cpu2_intc 7>,
+                                           <&cpu3_intc 3>, <&cpu3_intc 7>,
+                                           <&cpu4_intc 3>, <&cpu4_intc 7>,
+                                           <&cpu5_intc 3>, <&cpu5_intc 7>,
+                                           <&cpu6_intc 3>, <&cpu6_intc 7>,
+                                           <&cpu7_intc 3>, <&cpu7_intc 7>;
+             };
+     };
+};
maintainer
#16 lore raw

Re: [PATCH v3 10/11] riscv: dts: spacemit: add initial device tree of SpacemiT K3 SoC

Hi Guodong,

Quoted 55 lines · Guodong Xu

Hi, Samuel

Quoted 39 lines · Samuel Holland
Quoted 37 lines · Guodong Xu

SpacemiT K3 is equipped with 8 X100 cores, which are RVA23 compliant. Add nodes of uarts, timer and interrupt-controllers.

---
v3: Remove "supm" from the riscv,isa-extensions list.
v2: Remove aliases from k3.dtsi, they should be in board DTS.
Updated riscv,isa-extensions with new extensions from the extensions.yaml

---
 arch/riscv/boot/dts/spacemit/k3.dtsi | 548 +++++++++++++++++++++++++++++++++++
 1 file changed, 548 insertions(+)
arch/riscv/boot/dts/spacemit/k3.dtsi new file +19 -0
new file mode 100644
index 0000000000000000000000000000000000000000..be9335fba32cb9e81915b2b91cf08c55a5e96809
[...]
+                     reg = <0x0 0xe0400000 0x0 0x00200000>;
+                     interrupt-controller;
+                     #interrupt-cells = <0>;
+                     msi-controller;
+                     #msi-cells = <0>;
+                     interrupts-extended = <&cpu0_intc 9>, <&cpu1_intc 9>,
+                                           <&cpu2_intc 9>, <&cpu3_intc 9>,
+                                           <&cpu4_intc 9>, <&cpu5_intc 9>,
+                                           <&cpu6_intc 9>, <&cpu7_intc 9>;
+                     riscv,num-ids = <511>;
+                     riscv,num-guest-ids = <511>;
+                     riscv,hart-index-bits = <4>;
+                     riscv,guest-index-bits = <6>;
+             };
+
+             saplic: interrupt-controller@e0804000 {
+                     compatible = "spacemit,k3-aplic", "riscv,aplic";
+                     reg = <0x0 0xe0804000 0x0 0x4000>;
+                     msi-parent = <&simsic>;
Quoted 8 lines

arch/riscv/boot/dts/spacemit/k3.dtsi line 533

Quoted 4 lines
arch/riscv/boot/dts/spacemit/k3.dtsi new file +4 -0
+                     #interrupt-cells = <2>;
+                     interrupt-controller;
+                     riscv,num-sources = <512>;
+             };

Does the chip also have M-mode IMSIC and APLIC instances? Those need to be represented in the devicetree as well, for M-mode firmware to access them, just like the CLINT below.

Yes, the K3 chip does have M-mode IMSIC and APLIC instances. Currently, the boot firmware (U-Boot) transfers information about these nodes to OpenSBI. However, you are correct that they should be properly described in the DT.

Quoted 7 lines

In the next version, I will add the M-mode APLIC (maplic) and IMSIC (mimsic) nodes to k3.dtsi, for topology representation and potential firmware usage. I will set their status to "disabled" because exposing them as "okay" to Linux causes access faults during driver probing.

Please let me know if this approach (adding them but keeping them disabled) looks okay to you.

I think this is a reasonable compromise.

Personally, I think of the DTS files in the Linux repository as the "static" devicetree, which should describe a "complete" view of the hardware--that is, as seen from the highest privilege level. Then it is the responsibility of that highly-privileged software to modify the FDT as needed to provide a limited view of the hardware to lower-privileged software. And this modification is exactly what OpenSBI does before it passes the FDT to U-Boot. So the "static" devicetree would not disable these M-mode-only devices.

However, I recognize that people want to use the DTB files generated by the Linux build process with Linux directly, ignoring the firmware-provided FDT. In that cases the M-mode-only devices need to be disabled. And then you need a -u-boot.dtsi file to set status = "okay" for the firmware build. I think that's a reasonable compromise to make the "static" devicetree as complete as possible while still being usable directly in S-mode in some cases. (It still breaks if some peripheral is assigned to a different supervisor domain, or some DRAM is reserved by M-mode, etc., which is why I really recommend using the firmware FDT and not a file.)

Regards,
Samuel

#17 lore raw

Re: [PATCH v3 10/11] riscv: dts: spacemit: add initial device tree of SpacemiT K3 SoC

Am 15. Januar 2026 00:57:04 MEZ schrieb Samuel Holland <[email protected]>:

Quoted 76 lines

Hi Guodong,

Quoted 55 lines · Guodong Xu

Hi, Samuel

Quoted 39 lines · Samuel Holland
Quoted 37 lines · Guodong Xu

SpacemiT K3 is equipped with 8 X100 cores, which are RVA23 compliant. Add nodes of uarts, timer and interrupt-controllers.

---
v3: Remove "supm" from the riscv,isa-extensions list.
v2: Remove aliases from k3.dtsi, they should be in board DTS.
Updated riscv,isa-extensions with new extensions from the extensions.yaml

---
 arch/riscv/boot/dts/spacemit/k3.dtsi | 548 +++++++++++++++++++++++++++++++++++
 1 file changed, 548 insertions(+)
arch/riscv/boot/dts/spacemit/k3.dtsi new file +19 -0
new file mode 100644
index 0000000000000000000000000000000000000000..be9335fba32cb9e81915b2b91cf08c55a5e96809
[...]
+                     reg = <0x0 0xe0400000 0x0 0x00200000>;
+                     interrupt-controller;
+                     #interrupt-cells = <0>;
+                     msi-controller;
+                     #msi-cells = <0>;
+                     interrupts-extended = <&cpu0_intc 9>, <&cpu1_intc 9>,
+                                           <&cpu2_intc 9>, <&cpu3_intc 9>,
+                                           <&cpu4_intc 9>, <&cpu5_intc 9>,
+                                           <&cpu6_intc 9>, <&cpu7_intc 9>;
+                     riscv,num-ids = <511>;
+                     riscv,num-guest-ids = <511>;
+                     riscv,hart-index-bits = <4>;
+                     riscv,guest-index-bits = <6>;
+             };
+
+             saplic: interrupt-controller@e0804000 {
+                     compatible = "spacemit,k3-aplic", "riscv,aplic";
+                     reg = <0x0 0xe0804000 0x0 0x4000>;
+                     msi-parent = <&simsic>;
Quoted 8 lines

arch/riscv/boot/dts/spacemit/k3.dtsi line 533

Quoted 4 lines
arch/riscv/boot/dts/spacemit/k3.dtsi new file +4 -0
+                     #interrupt-cells = <2>;
+                     interrupt-controller;
+                     riscv,num-sources = <512>;
+             };

Does the chip also have M-mode IMSIC and APLIC instances? Those need to be represented in the devicetree as well, for M-mode firmware to access them, just like the CLINT below.

Yes, the K3 chip does have M-mode IMSIC and APLIC instances. Currently, the boot firmware (U-Boot) transfers information about these nodes to OpenSBI. However, you are correct that they should be properly described in the DT.

Quoted 7 lines

In the next version, I will add the M-mode APLIC (maplic) and IMSIC (mimsic) nodes to k3.dtsi, for topology representation and potential firmware usage. I will set their status to "disabled" because exposing them as "okay" to Linux causes access faults during driver probing.

Please let me know if this approach (adding them but keeping them disabled) looks okay to you.

I think this is a reasonable compromise.

Personally, I think of the DTS files in the Linux repository as the "static" devicetree, which should describe a "complete" view of the hardware--that is, as seen from the highest privilege level. Then it is the responsibility of that highly-privileged software to modify the FDT as needed to provide a limited view of the hardware to lower-privileged software. And this modification is exactly what OpenSBI does before it passes the FDT to U-Boot. So the "static" devicetree would not disable these M-mode-only devices.

Quoted 4 lines

However, I recognize that people want to use the DTB files generated by the Linux build process with Linux directly, ignoring the firmware-provided FDT. In that cases the M-mode-only devices need to be disabled. And then you need a -u-boot.dtsi file to set status = "okay" for the firmware build. I think

U-Boot offers the EFI_DT_FIXUP_PROTOCOL (https://github.com/U-Boot-EFI/EFI_DT_FIXUP_PROTOCOL) to adjust device-trees loaded by systemd-boot or GRUB.

The disabling should be done there to avoid having different device-trees in firmware and Linux code.

A pull request for providing the protocol in EDK II is pending.

Best regards

Heinrich

Quoted 9 lines

that's a reasonable compromise to make the "static" devicetree as complete as possible while still being usable directly in S-mode in some cases. (It still breaks if some peripheral is assigned to a different supervisor domain, or some DRAM is reserved by M-mode, etc., which is why I really recommend using the firmware FDT and not a file.)

Regards,
Samuel

author
#18 lore raw

PATCH v3 11/11 riscv: dts: spacemit: add SpacemiT K3 Pico-ITX board device tree

In reply to Guodong Xu

K3 Pico-ITX is a 2.5-inch single-board computer equipted with a SpacemiT K3 SoC.

This minimal device tree enables booting into a serial console with UART output.

---
v3: No change.
v2: Add aliases node in this board DT.
Update the memory node to reflect the hardware truth. Address
starts at 0x100000000 (4G) boundary.

---
 arch/riscv/boot/dts/spacemit/Makefile        |  1 +
 arch/riscv/boot/dts/spacemit/k3-pico-itx.dts | 38 ++++++++++++++++++++++++++++
 2 files changed, 39 insertions(+)
arch/riscv/boot/dts/spacemit/Makefile +1 -0
index 95889e7269d1bae679b28cd053e1b0a23ae6de68..7e2b877025718113a0e31917eadf7562f488d825 100644
@@ -4,3 +4,4 @@ dtb-$(CONFIG_ARCH_SPACEMIT) += k1-milkv-jupiter.dtb
 dtb-$(CONFIG_ARCH_SPACEMIT) += k1-musepi-pro.dtb
 dtb-$(CONFIG_ARCH_SPACEMIT) += k1-orangepi-r2s.dtb
 dtb-$(CONFIG_ARCH_SPACEMIT) += k1-orangepi-rv2.dtb
+dtb-$(CONFIG_ARCH_SPACEMIT) += k3-pico-itx.dtb
arch/riscv/boot/dts/spacemit/k3-pico-itx.dts new file +38 -0
new file mode 100644
index 0000000000000000000000000000000000000000..037ce757e5bcae0258a326ea6265185d761f2b52
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2025 SpacemiT (Hangzhou) Technology Co. Ltd
+ * Copyright (c) 2025 Guodong Xu <[email protected]>
+ */
+
+#include "k3.dtsi"
+
+/ {
+	model = "SpacemiT K3 Pico-ITX";
+	compatible = "spacemit,k3-pico-itx", "spacemit,k3";
+
+	aliases {
+		serial0 = &uart0;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		serial6 = &uart6;
+		serial7 = &uart7;
+		serial8 = &uart8;
+		serial9 = &uart9;
+		serial10 = &uart10;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	memory@100000000 {
+		device_type = "memory";
+		reg = <0x1 0x00000000 0x4 0x00000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
Signature · 1 line
2.43.0