board/andes/ae350: bump to AndeSight v5.4.x and add OP-TEE
PATCH 1/1 board/andes/ae350: bump to AndeSight v5.4.x and add OP-TEE
Update the Andes AE350 board support to align with the AndeSight v5.4.x software stack. This update includes the following changes:
- Bump Linux kernel to v6.6.49, and update U-Boot and OpenSBI to the corresponding AndeSight v5.4.x custom tarballs for the QEMU Andes AE350 machine.
- Add optional support for OP-TEE (Open Portable Trusted Execution Environment) via config fragments.
- Update genimage_sdcard.cfg to align the final SD card image size to a power of 2, which is required for correct QEMU emulation.
- Modify post-build.sh to install all generated DTBs rather than a single hardcoded DTB.
- Add a patch for optee-test to disable fragmentation calculation, fixing a build failure caused by struct mismatch between optee-test 4.6.0 and the older optee-os 4.3.0.
--- board/andes/ae350/genimage_sdcard.cfg | 8 +- board/andes/ae350/linux.config.fragment | 1 + board/andes/ae350/patches/linux/linux.hash | 3 +- .../andes/ae350/patches/opensbi/opensbi.hash | 3 +- .../patches/optee-client/optee-client.hash | 2 + .../optee-examples/optee-examples.hash | 2 + .../ae350/patches/optee-os/optee-os.hash | 2 + ...ble-fragmentation-calculation-for-ol.patch | 44 ++++++ .../ae350/patches/optee-test/optee-test.hash | 2 + board/andes/ae350/patches/uboot/uboot.hash | 3 +- board/andes/ae350/post-build.sh | 12 +- board/andes/ae350/readme.txt | 126 +++++++++++++++++- .../boot/extlinux/extlinux.conf | 1 - board/andes/ae350/uboot-optee.config.fragment | 5 + board/andes/ae350/uboot.config.fragment | 5 + configs/andes_ae350_45_defconfig | 17 ++- 16 files changed, 215 insertions(+), 21 deletions(-) create mode 100644 board/andes/ae350/linux.config.fragment create mode 100644 board/andes/ae350/patches/optee-client/optee-client.hash create mode 100644 board/andes/ae350/patches/optee-examples/optee-examples.hash create mode 100644 board/andes/ae350/patches/optee-os/optee-os.hash create mode 100644 board/andes/ae350/patches/optee-test/4.6.0/0001-xtest-stats-Disable-fragmentation-calculation-for-ol.patch create mode 100644 board/andes/ae350/patches/optee-test/optee-test.hash create mode 100644 board/andes/ae350/uboot-optee.config.fragment
board/andes/ae350/genimage_sdcard.cfg +6 -2
@@ -3,10 +3,10 @@ image boot.vfat { files = { "u-boot-spl.bin", "u-boot.itb", - "ae350_ax45mp.dtb", + "dtb", } } - size = 2M + size = 2040K } image sdcard.img {
@@ -16,11 +16,15 @@ image sdcard.img { partition boot { partition-type = 0xC image = "boot.vfat" + offset = 8K + size = 2040K # 2MB - 8KB } partition rootfs { partition-type = 0x83 bootable = true image = "rootfs.ext4" + offset = 2M + size = 30M } }
board/andes/ae350/linux.config.fragment new file +1 -0
@@ -0,0 +1 @@ +CONFIG_INITRAMFS_SOURCE=""
board/andes/ae350/patches/linux/linux.hash +2 -1
@@ -1,2 +1,3 @@ # Locally calculated -sha256 c71af3d2c86c0a0deca4f54b51d1c35217082b030052cc3513dc42e852652733 linux-v6.0.y-andes.tar.gz +sha256 92564d3bb7643873232b19c605d77d0ab888f6a9142d1436a25d01239bceeed0 linux-ast-v5_4_1-release.tar.gz +sha256 2a1dc278902473fed28fc40d4eecdbe0692b23c1282649db8281efcb8306e679 linux-optee_ast540_v4.3.tar.gz
board/andes/ae350/patches/opensbi/opensbi.hash +2 -1
@@ -1,2 +1,3 @@ # Locally calculated -sha256 d11702103f177a2914e94eec57ce5ed820296d874f6b6525c4482e55d71a3667 opensbi-1.6.tar.gz +sha256 f53ee069cfee739d0dc22dc65006c9dde6b18f41044aac3b3eda236266bc7152 opensbi-ast-v5_4_1-release.tar.gz +sha256 70a38b6d3c8c9c4eaeb6076480e567c7c5155f321e8989492ccc95ad87304185 opensbi-optee_ast540_v4.3.tar.gz
board/andes/ae350/patches/optee-client/optee-client.hash new file +2 -0
@@ -0,0 +1,2 @@ +# From https://github.com/OP-TEE/optee_client/releases/tag/4.3.0 +sha256 a9a91bdb433df795c87a6d15198effbd648e3671ae611f2a3f8b41229d61cce0 optee_client-4.3.0.tar.gz
board/andes/ae350/patches/optee-examples/optee-examples.hash new file +2 -0
@@ -0,0 +1,2 @@ +# From https://github.com/linaro-swg/optee_examples/releases/tag/4.3.0 +sha256 ee1576617365b5fe9d20d72c16cf6b39159eb79b1401189bd37a91ef03371820 optee_examples-4.3.0.tar.gz
board/andes/ae350/patches/optee-os/optee-os.hash new file +2 -0
@@ -0,0 +1,2 @@ +# Locally calculated +sha256 f56fa9636afe671f67b87b1bfcd546d124003a4817ad1b47d1a8c91d80a4043a optee_os-optee_ast540_v4.3.tar.gz
board/andes/ae350/patches/optee-test/4.6.0/0001-xtest-stats-Disable-fragmentation-calculation-for-ol.patch new file +44 -0
44 lines not on this page · raw message
board/andes/ae350/patches/optee-test/optee-test.hash new file +2 -0
@@ -0,0 +1,2 @@ +# From https://github.com/OP-TEE/optee_test/releases/tag/4.3.0 +sha256 7bb181b74be88593df48321b816837acaad8e4d45e883f25a2e039978e5ec415 optee_test-4.3.0.tar.gz
board/andes/ae350/patches/uboot/uboot.hash +2 -1
@@ -1,2 +1,3 @@ # Locally calculated -sha256 0f933f6c5a426895bf306e93e6ac53c60870e4b54cda56d95211bec99e63bec7 u-boot-2025.07.tar.bz2 +sha256 c7726a52c9e626253962f6643fa9706a789b47acdf7ffb7f315f46d5ecf46d4d uboot-ast-v5_4_1-release.tar.gz +sha256 c6d9232e09ba1f318b6ff6c558c5847b8ac576eccfbeffb6d3c315dad3da4b49 uboot-optee_ast540_v4.3.tar.gz
board/andes/ae350/post-build.sh +11 -1
@@ -1,3 +1,13 @@ #!/bin/sh +set -e + +mkdir -p "${BINARIES_DIR}"/dtb +cd "${BUILD_DIR}"/linux-custom/arch/riscv/boot/dts/andes/ || exit 1 + +for f in *.dtb; do + [ -e "$f" ] || continue + cp -a "$f" "${BINARIES_DIR}"/dtb +done + cp "$BINARIES_DIR"/Image "$TARGET_DIR"/boot -cp "$BINARIES_DIR"/ae350_ax45mp.dtb "$TARGET_DIR"/boot +cp -a "$BINARIES_DIR"/dtb "$TARGET_DIR"/boot
board/andes/ae350/readme.txt +119 -7
151 lines not on this page · raw message
board/andes/ae350/rootfs_overlay/boot/extlinux/extlinux.conf +0 -1
@@ -1,4 +1,3 @@ label linux kernel /boot/Image - fdt /boot/ae350_ax45mp.dtb append earlycon=sbi root=/dev/mmcblk0p2 rootwait
board/andes/ae350/uboot-optee.config.fragment new file +5 -0
@@ -0,0 +1,5 @@ +CONFIG_CMD_OPTEE=y +CONFIG_OPTEE=y +CONFIG_OPTEE_LIB=y +CONFIG_OPTEE_TA_RPC_TEST=y +CONFIG_TEE=y
board/andes/ae350/uboot.config.fragment +5 -0
@@ -1,6 +1,11 @@ CONFIG_SPL_FS_FAT=y +CONFIG_SPL_LOAD_FIT_ADDRESS=0x80020000 CONFIG_SPL_MMC=y CONFIG_SPL_OPENSBI_LOAD_ADDR=0x0 CONFIG_SPL_OPENSBI_SCRATCH_OPTIONS=0x0 +CONFIG_SPL_RAM_DEVICE=y +CONFIG_SPL_TEXT_BASE=0x80000000 CONFIG_DISPLAY_CPUINFO=y CONFIG_DISPLAY_BOARDINFO=y +CONFIG_SYS_FDT_BASE=0x801E0000 +CONFIG_TEXT_BASE=0x01800000
configs/andes_ae350_45_defconfig +10 -7
@@ -11,22 +11,24 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/andes/ae350/genimage_sdcard.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,andestech,linux,v6.0.y-andes)/linux-v6.0.y-andes.tar.gz" -BR2_LINUX_KERNEL_DEFCONFIG="ae350_ax45mp" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,andestech,linux,ast-v5_4_1-release)/linux-ast-v5_4_1-release.tar.gz" +BR2_LINUX_KERNEL_DEFCONFIG="ae350_rv64_smp" +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/andes/ae350/linux.config.fragment" BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="andes/ae350_ax45mp" +BR2_LINUX_KERNEL_INTREE_DTS_NAME="andes/ax45_c1_d_dsp_noncoherent_ae350" BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="30M" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_OPENSBI=y -BR2_TARGET_OPENSBI_CUSTOM_VERSION=y -BR2_TARGET_OPENSBI_CUSTOM_VERSION_VALUE="1.6" +BR2_TARGET_OPENSBI_CUSTOM_TARBALL=y +BR2_TARGET_OPENSBI_CUSTOM_TARBALL_LOCATION="$(call github,andestech,opensbi,ast-v5_4_1-release)/opensbi-ast-v5_4_1-release.tar.gz" BR2_TARGET_OPENSBI_PLAT="generic" # BR2_TARGET_OPENSBI_INSTALL_JUMP_IMG is not set BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y -BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.07" +BR2_TARGET_UBOOT_CUSTOM_TARBALL=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,andestech,uboot,ast-v5_4_1-release)/uboot-ast-v5_4_1-release.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="ae350_rv64_spl_xip" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/andes/ae350/uboot.config.fragment" BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
@@ -37,6 +39,7 @@ BR2_TARGET_UBOOT_NEEDS_OPENSBI=y BR2_TARGET_UBOOT_FORMAT_CUSTOM=y BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="SWDTB=1" BR2_PACKAGE_HOST_ANDES_SPI_BURN=y BR2_PACKAGE_HOST_DOSFSTOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y
Signature · 6 lines
2.34.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Quoted 34 lines · Che-Wei Chuang
Update the Andes AE350 board support to align with the AndeSight v5.4.x software stack. This update includes the following changes:
- Bump Linux kernel to v6.6.49, and update U-Boot and OpenSBI to the corresponding AndeSight v5.4.x custom tarballs for the QEMU Andes AE350 machine.
- Add optional support for OP-TEE (Open Portable Trusted Execution Environment) via config fragments.
- Update genimage_sdcard.cfg to align the final SD card image size to a power of 2, which is required for correct QEMU emulation.
- Modifypost-build.shto install all generated DTBs rather than a single hardcoded DTB.
- Add a patch for optee-test to disable fragmentation calculation, fixing a build failure caused by struct mismatch between optee-test 4.6.0 and the older optee-os 4.3.0.Signed-off-by Che-Wei Chuang <[email protected]>--- board/andes/ae350/genimage_sdcard.cfg | 8 +- board/andes/ae350/linux.config.fragment | 1 + board/andes/ae350/patches/linux/linux.hash | 3 +- .../andes/ae350/patches/opensbi/opensbi.hash | 3 +- .../patches/optee-client/optee-client.hash | 2 + .../optee-examples/optee-examples.hash | 2 + .../ae350/patches/optee-os/optee-os.hash | 2 + ...ble-fragmentation-calculation-for-ol.patch | 44 ++++++ .../ae350/patches/optee-test/optee-test.hash | 2 + board/andes/ae350/patches/uboot/uboot.hash | 3 +- board/andes/ae350/post-build.sh | 12 +- board/andes/ae350/readme.txt | 126 +++++++++++++++++- .../boot/extlinux/extlinux.conf | 1 - board/andes/ae350/uboot-optee.config.fragment | 5 + board/andes/ae350/uboot.config.fragment | 5 + configs/andes_ae350_45_defconfig | 17 ++-
Quoted 8 lines
16 files changed, 215 insertions(+), 21 deletions(-) create mode 100644 board/andes/ae350/linux.config.fragment create mode 100644 board/andes/ae350/patches/optee-client/optee-client.hash create mode 100644 board/andes/ae350/patches/optee-examples/optee-examples.hash create mode 100644 board/andes/ae350/patches/optee-os/optee-os.hash create mode 100644 board/andes/ae350/patches/optee-test/4.6.0/0001-xtest-stats-Disable-fragmentation-calculation-for-ol.patch create mode 100644 board/andes/ae350/patches/optee-test/optee-test.hash create mode 100644 board/andes/ae350/uboot-optee.config.fragment
LGTM.
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Hi Che-Wei,
Quoted 15 lines · Che-Wei Chuang via buildroot
Update the Andes AE350 board support to align with the AndeSight v5.4.x software stack. This update includes the following changes:
- Bump Linux kernel to v6.6.49, and update U-Boot and OpenSBI to the corresponding AndeSight v5.4.x custom tarballs for the QEMU Andes AE350 machine.
- Add optional support for OP-TEE (Open Portable Trusted Execution Environment) via config fragments.
- Update genimage_sdcard.cfg to align the final SD card image size to a power of 2, which is required for correct QEMU emulation.
- Modifypost-build.shto install all generated DTBs rather than a single hardcoded DTB.
- Add a patch for optee-test to disable fragmentation calculation, fixing a build failure caused by struct mismatch between optee-test 4.6.0 and the older optee-os 4.3.0.
Very good commit message, thank you!
It would have been better to split off all the optee-related stuff in a
separate commit. If your commit message contains a bullet list of changes, that's an indication that it's mixing too many things.
This _could_ be split into four commits actually:
1. SD card
2. Update kernel etc.
3. Add qemu
4. Add op-tee
Quoted 1 line
Signed-off-by Che-Wei Chuang <[email protected]>
I was going to apply, but it fails to build [1]. Probably because we updated
opensbi...
So I'll give a few more comments.
[snip]> --- /dev/null
Quoted 1 line
+++
b/board/andes/ae350/patches/optee-test/4.6.0/0001-xtest-stats-Disable-fragmentation-calculation-for-ol.patch
The readme says to use optee-test 4.3.0, so how does this patch apply?
[snip]> +QEMU (AE350 simulation)
Quoted 11 lines
+=======================
board/andes/ae350/readme.txt +10
-0+ +To run the andes_ae350 machine model, use the QEMU version: +https://github.com/andestech/qemu + +Boot command example: + qemu-system-riscv64 \ + -nographic \ + -M andes_ae350 \ + -cpu andes-ax45 \ + -m 2G -smp 1 \
board/andes/ae350/readme.txt Your SD card partition should be: · line 130
Quoted 10 lines
board/andes/ae350/readme.txt +10
-0+ -bios none \ + -device loader,file=u-boot-spl.bin,addr=0x80000000 \ + -device loader,file=u-boot.itb,addr=0x80020000 \ + -device loader,file=dtb/ax45_c1_d_dsp_noncoherent_ae350.dtb,addr=0x801E0000 \ + -drive file=sdcard.img,format=raw,id=sd1 \ + -device sd-card,drive=sd1 \ + -net nic,model=atfmac100 \ + -net user,net=192.168.96.0/24,dhcpstart=192.168.96.10,\ +domainname=andestech.com,hostfwd=tcp::9623-:23 \ + -gdb tcp::9696
For the qemu_* defconfigs, in CI the readme.txt is parsed and this command is
extracted to actually run the qemu command - which verifies that not only it builds, but it also runs. It would be nice if we could do the same for ae350.
Note that that does require an update to thesupport/scripts/boot-qemu-image.py script because it now only supports qemu_* defconfigs. And you also have to install a start-qemu.sh script, like board/qemu/post-image.sh does. The latter is BTW advisable to do for this one as well.
Quoted 1 line
+OP-TEE OS (4.3.0)
Why 4.3.0? Is that the latest supported by Andes? It's already 2 years old so
I'm surprised...
Quoted 14 lines
+=================
board/andes/ae350/readme.txt +13
-0+ +The file `tee.bin` is the OP-TEE OS secure world binary. +It provides a Trusted Execution Environment (TEE) that runs alongside Linux in +secure mode. + +The OP-TEE OS binary (`tee.bin`) is packaged inside the `u-boot.itb` image on +the AE350 platform. + +OP-TEE provides the following core security services: + +- Secure execution of Trusted Applications (TAs) +- Secure key storage and cryptographic operations +- Hardware-backed isolation between Secure World and Normal World
board/andes/ae350/readme.txt Your SD card partition should be: · line 156
Quoted 10 lines
board/andes/ae350/readme.txt +10
-0+- Secure monitor call (SMC) interface for Linux communication + +Linux communicates with OP-TEE through the standard OP-TEE Linux driver using +SMC calls. This allows normal world applications to access secure services +without exposing sensitive data to the Linux kernel. + +For the single-core configuration, use ax45_c1_d_dsp_noncoherent_ae350_optee DTS. +For the quad-core configuration, switch to ax45mp_c4_d_dsp_ae350_optee. + +To enable this feature, configure the following options in the Buildroot menuconfig:
Instead of specifying all these menuconfig changes, I think it's better to
simply have a separate defconfig for ae350 with optee.
board/andes/ae350/readme.txt Your SD card partition should be: · line 162
Quoted 6 lines
board/andes/ae350/readme.txt +6
-0+Bootloaders ---> +[*] optee_os ---> +OP-TEE OS version (Custom tarball) ---> +URL of custom OP-TEE OS tarball: + $(call github,andestech,optee_os,optee_ast540_v4.3)/optee_os-optee_ast540_v4.3.tar.gz +[*] OP-TEE OS needs host-python-cryptography
[snip]> +OP-TEE User-space Configuration (4.3.0)
board/andes/ae350/readme.txt Your SD card partition should be: · line 207
Quoted 13 lines
+=======================================
board/andes/ae350/readme.txt +12
-0+ +The OP-TEE user-space components are built from custom upstream +tarballs and provide Linux support for OP-TEE OS. + +They can be enabled from Buildroot menuconfig: +Target packages ---> + Security ---> + +-*- optee-client + optee-client version (Custom tarball) ---> + URL of custom optee-client tarball: + $(call github,OP-TEE,optee_client,4.3.0)/optee_client-4.3.0.tar.gz
With a separate defconfig, this should still be part of the defconfig, but
examples and test should not be, and just be mentioned in the readme.
Quoted 11 lines
board/andes/ae350/readme.txt +11
-0+ +[*] optee-examples + optee-examples version (Custom tarball) ---> + URL of custom optee-examples tarball: + $(call github,linaro-swg,optee_examples,4.3.0)/optee_examples-4.3.0.tar.gz + +[*] optee-test + optee-test version (Custom tarball) ---> + URL of custom optee-test tarball: + $(call github,OP-TEE,optee_test,4.3.0)/optee_test-4.3.0.tar.gz +
[snip]
configs/andes_ae350_45_defconfig BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" · line 14
Quoted 11 lines
configs/andes_ae350_45_defconfig +1
-2@@ -11,22 +11,24 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/andes/ae350/genimage_sdcard.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,andestech,linux,v6.0.y-andes)/linux-v6.0.y-andes.tar.gz" -BR2_LINUX_KERNEL_DEFCONFIG="ae350_ax45mp" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,andestech,linux,ast-v5_4_1-release)/linux-ast-v5_4_1-release.tar.gz"
It's very weird that the version number goes down... But I guess before it was
the kernel version, and now it's the BSP release.
Quoted 12 lines
configs/andes_ae350_45_defconfig +4
-3+BR2_LINUX_KERNEL_DEFCONFIG="ae350_rv64_smp" +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/andes/ae350/linux.config.fragment" BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="andes/ae350_ax45mp" +BR2_LINUX_KERNEL_INTREE_DTS_NAME="andes/ax45_c1_d_dsp_noncoherent_ae350" BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="30M" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_OPENSBI=y -BR2_TARGET_OPENSBI_CUSTOM_VERSION=y -BR2_TARGET_OPENSBI_CUSTOM_VERSION_VALUE="1.6"
configs/andes_ae350_45_defconfig BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" · line 31
Quoted 10 lines
configs/andes_ae350_45_defconfig +4
-2+BR2_TARGET_OPENSBI_CUSTOM_TARBALL=y +> +BR2_TARGET_OPENSBI_CUSTOM_TARBALL_LOCATION="$(call github,andestech,opensbi,ast-v5_4_1-release)/opensbi-ast-v5_4_1-release.tar.gz" BR2_TARGET_OPENSBI_PLAT="generic" # BR2_TARGET_OPENSBI_INSTALL_JUMP_IMG is not set BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y -BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.07" +BR2_TARGET_UBOOT_CUSTOM_TARBALL=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,andestech,uboot,ast-v5_4_1-release)/uboot-ast-v5_4_1-release.tar.gz"
It's _very_ surprising that a board that was previously supported upstream now
suddenly requires a vendor fork... Is it really a good idea to do that? Does the vendor fork have some advantages that upstream doesn't?
Regards,
Arnout
configs/andes_ae350_45_defconfig BR2_TARGET_UBOOT_NEEDS_OPENSBI=y · line 45
Quoted 11 lines
configs/andes_ae350_45_defconfig +1
-0BR2_TARGET_UBOOT_BOARD_DEFCONFIG="ae350_rv64_spl_xip" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/andes/ae350/uboot.config.fragment" BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y@@ -37,6 +39,7 @@ BR2_TARGET_UBOOT_NEEDS_OPENSBI=y BR2_TARGET_UBOOT_FORMAT_CUSTOM=y BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="SWDTB=1" BR2_PACKAGE_HOST_ANDES_SPI_BURN=y BR2_PACKAGE_HOST_DOSFSTOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot