Add the address in traces
Subsystems (2)
v4 cover Add the address in traces
When multiple DWC3 controllers are being used, trace events from different instances get mixed up making debugging difficult as there's no way to distinguish which instance generated the trace.
Hence append the controller register base address into ftrace. This needs the following reworks which is addressed using this patch series.
1. Removal of dep->regs and use dwc->regs everywhere
2. Use dwc pointer in all dwc3_readl/writel()
3. Adding the base addr in traces.
Changes in v4:
- Updated the documentation and commit message.
- Link to v3: https://lore.kernel.org/all/[email protected]/
Changes in v3:
- Renamed the variable to 'address'.
- Used u32 instead of string/char[].
- Link to v2: https://lore.kernel.org/all/[email protected]/
Changes in v2:
- Avoid using macros for dwc3_readl/writel()
- Use base address intraces instead of dev name.
- Split the patch into a series.
- Link to v1: https://lore.kernel.org/all/[email protected]/
Prashanth K (3):
usb: dwc3: Remove of dep->regs
usb: dwc3: Add dwc pointer to dwc3_readl/writel
usb: dwc3: Log dwc3 address in traces
drivers/usb/dwc3/core.c | 199 +++++++++++++++++++------------------ drivers/usb/dwc3/core.h | 12 +-- drivers/usb/dwc3/debugfs.c | 44 ++++---- drivers/usb/dwc3/drd.c | 76 +++++++------- drivers/usb/dwc3/ep0.c | 22 ++-- drivers/usb/dwc3/gadget.c | 164 +++++++++++++++--------------- drivers/usb/dwc3/gadget.h | 4 +- drivers/usb/dwc3/io.h | 11 +- drivers/usb/dwc3/trace.h | 88 ++++++++++------ drivers/usb/dwc3/ulpi.c | 10 +- 10 files changed, 327 insertions(+), 303 deletions(-)
Signature · 1 line
2.34.1
PATCH v4 1/3 usb: dwc3: Remove of dep->regs
Remove dep->regs from struct dwc3_ep and reuse dwc->regs instead. Thus eliminating redundant iomem addresses and making register access more consistent across the driver.
--- drivers/usb/dwc3/core.h | 10 ++++------ drivers/usb/dwc3/debugfs.c | 12 ++++-------- drivers/usb/dwc3/gadget.c | 12 ++++++------ drivers/usb/dwc3/gadget.h | 2 +- 4 files changed, 15 insertions(+), 21 deletions(-)
drivers/usb/dwc3/core.h +4 -6
@@ -165,10 +165,10 @@#define DWC3_DCFG1 0xc740/* DWC_usb32 only */ #define DWC3_DEP_BASE (n) (0xc800 + ((n) * 0x10)) -#define DWC3_DEPCMDPAR2 0x00 -#define DWC3_DEPCMDPAR1 0x04 -#define DWC3_DEPCMDPAR0 0x08 -#define DWC3_DEPCMD 0x0c +#define DWC3_DEPCMDPAR2 (n) (DWC3_DEP_BASE(n) + 0x00) +#define DWC3_DEPCMDPAR1 (n) (DWC3_DEP_BASE(n) + 0x04) +#define DWC3_DEPCMDPAR0 (n) (DWC3_DEP_BASE(n) + 0x08) +#define DWC3_DEPCMD (n) (DWC3_DEP_BASE(n) + 0x0c)#define DWC3_DEV_IMOD (n) (0xca00 + ((n) * 0x4))
@@ -749,8 +749,6 @@ struct dwc3_ep {struct list_head pending_list;struct list_head started_list; -void __iomem *regs; -struct dwc3_trb *trb_pool;dma_addr_t trb_pool_dma;struct dwc3 *dwc;
drivers/usb/dwc3/debugfs.c +4 -8
@@ -36,23 +36,19 @@#define dump_ep_register_set (n) \ { \ .name = "DEPCMDPAR2("__stringify(n)")", \ - .offset = DWC3_DEP_BASE(n) + \ - DWC3_DEPCMDPAR2, \ + .offset = DWC3_DEPCMDPAR2(n), \ }, \ { \ .name = "DEPCMDPAR1("__stringify(n)")", \ - .offset = DWC3_DEP_BASE(n) + \ - DWC3_DEPCMDPAR1, \ + .offset = DWC3_DEPCMDPAR1(n), \ }, \ { \ .name = "DEPCMDPAR0("__stringify(n)")", \ - .offset = DWC3_DEP_BASE(n) + \ - DWC3_DEPCMDPAR0, \ + .offset = DWC3_DEPCMDPAR0(n), \ }, \ { \ .name = "DEPCMD("__stringify(n)")", \ - .offset = DWC3_DEP_BASE(n) + \ - DWC3_DEPCMD, \ + .offset = DWC3_DEPCMD(n), \ }
drivers/usb/dwc3/gadget.c +6 -6
@@ -320,6 +320,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,int cmd_status =0 ;int ret = -EINVAL ; +u8 epnum = dep->number;/* * When operating in USB 2.0 speeds (HS/FS), if GUSB2PHYCFG.ENBLSLPM or
@@ -355,9 +356,9 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,* improve performance. */ if (DWC3_DEPCMD_CMD (cmd) !=DWC3_DEPCMD_UPDATETRANSFER ) { -dwc3_writel (dep->regs,DWC3_DEPCMDPAR0 , params->param0); -dwc3_writel (dep->regs,DWC3_DEPCMDPAR1 , params->param1); -dwc3_writel (dep->regs,DWC3_DEPCMDPAR2 , params->param2); +dwc3_writel (dwc->regs,DWC3_DEPCMDPAR0 (epnum), params->param0); +dwc3_writel (dwc->regs,DWC3_DEPCMDPAR1 (epnum), params->param1); +dwc3_writel (dwc->regs,DWC3_DEPCMDPAR2 (epnum), params->param2); }/*
@@ -381,7 +382,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,else cmd |=DWC3_DEPCMD_CMDACT ; -dwc3_writel (dep->regs,DWC3_DEPCMD , cmd); +dwc3_writel (dwc->regs,DWC3_DEPCMD (epnum), cmd); if (!(cmd & DWC3_DEPCMD_CMDACT) || (DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_ENDTRANSFER &&
@@ -391,7 +392,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd, } do { - reg = dwc3_readl(dep->regs, DWC3_DEPCMD); + reg = dwc3_readl(dwc->regs, DWC3_DEPCMD(epnum)); if (!(reg & DWC3_DEPCMD_CMDACT)) { cmd_status = DWC3_DEPCMD_STATUS(reg);
@@ -3381,7 +3382,6 @@ static int dwc3_gadget_init_endpoint(struct dwc3 *dwc, u8 epnum) dep->dwc = dwc; dep->number = epnum; dep->direction = direction; - dep->regs = dwc->regs +DWC3_DEP_BASE (epnum); dwc->eps[epnum] = dep; dep->combo_num =0 ; dep->start_cmd_status =0 ;
drivers/usb/dwc3/gadget.h +1 -1
@@ -132,7 +132,7 @@ static inline void dwc3_gadget_ep_get_transfer_index(struct dwc3_ep *dep) {u32 res_id; - res_id =dwc3_readl (dep->regs,DWC3_DEPCMD ); + res_id =dwc3_readl (dep->dwc->regs,DWC3_DEPCMD (dep->number)); dep->resource_index =DWC3_DEPCMD_GET_RSC_IDX (res_id); }
Signature · 1 line
2.34.1
PATCH v4 2/3 usb: dwc3: Add dwc pointer to dwc3_readl/writel
In reply to Prashanth KUse dwc pointer in dwc3_readl() dwc3_writel() instead of passing the dwc->regs. This would help us access the dwc structure and log the base address in traces. There's no functional changes in this patch, just refactoring existing APIs.
--- drivers/usb/dwc3/core.c | 194 ++++++++++++++++++------------------- drivers/usb/dwc3/debugfs.c | 32 +++--- drivers/usb/dwc3/drd.c | 76 +++++++-------- drivers/usb/dwc3/ep0.c | 20 ++-- drivers/usb/dwc3/gadget.c | 160 +++++++++++++++--------------- drivers/usb/dwc3/gadget.h | 4 +- drivers/usb/dwc3/io.h | 7 +- drivers/usb/dwc3/ulpi.c | 10 +- 8 files changed, 253 insertions(+), 250 deletions(-)
drivers/usb/dwc3/core.c +97 -97
@@ -114,23 +114,23 @@ void dwc3_enable_susphy(struct dwc3 *dwc, bool enable)int i;for (i =0 ; i < dwc->num_usb3_ports; i++) { - reg =dwc3_readl (dwc->regs,DWC3_GUSB3PIPECTL (i)); + reg =dwc3_readl (dwc,DWC3_GUSB3PIPECTL (i));if (enable && !dwc->dis_u3_susphy_quirk) reg |=DWC3_GUSB3PIPECTL_SUSPHY ;else reg &= ~DWC3_GUSB3PIPECTL_SUSPHY ; -dwc3_writel (dwc->regs,DWC3_GUSB3PIPECTL (i), reg); +dwc3_writel (dwc,DWC3_GUSB3PIPECTL (i), reg); }for (i =0 ; i < dwc->num_usb2_ports; i++) { - reg =dwc3_readl (dwc->regs,DWC3_GUSB2PHYCFG (i)); + reg =dwc3_readl (dwc,DWC3_GUSB2PHYCFG (i));if (enable && !dwc->dis_u2_susphy_quirk) reg |=DWC3_GUSB2PHYCFG_SUSPHY ;else reg &= ~DWC3_GUSB2PHYCFG_SUSPHY ; -dwc3_writel (dwc->regs,DWC3_GUSB2PHYCFG (i), reg); +dwc3_writel (dwc,DWC3_GUSB2PHYCFG (i), reg); } }EXPORT_SYMBOL_GPL (dwc3_enable_susphy);
@@ -140,7 +140,7 @@ void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode, bool ignore_susphy)unsigned int hw_mode;u32 reg; - reg =dwc3_readl (dwc->regs,DWC3_GCTL ); + reg =dwc3_readl (dwc,DWC3_GCTL );/* * For DRD controllers, GUSB3PIPECTL.SUSPENDENABLE and
@@ -155,7 +155,7 @@ void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode, bool ignore_susphy) reg &= ~(DWC3_GCTL_PRTCAPDIR (DWC3_GCTL_PRTCAP_OTG )); reg |=DWC3_GCTL_PRTCAPDIR (mode); -dwc3_writel (dwc->regs,DWC3_GCTL , reg); +dwc3_writel (dwc,DWC3_GCTL , reg); dwc->current_dr_role = mode;trace_dwc3_set_prtcap (mode);
@@ -216,9 +216,9 @@ static void __dwc3_set_mode(struct work_struct *work)if (dwc->current_dr_role && ((DWC3_IP_IS (DWC3 ) || DWC3_VER_IS_PRIOR(DWC31, 190A)) && desired_dr_role !=DWC3_GCTL_PRTCAP_OTG )) { - reg =dwc3_readl (dwc->regs,DWC3_GCTL ); + reg =dwc3_readl (dwc,DWC3_GCTL ); reg |=DWC3_GCTL_CORESOFTRESET ; -dwc3_writel (dwc->regs,DWC3_GCTL , reg); +dwc3_writel (dwc,DWC3_GCTL , reg);/* * Wait for internal clocks to synchronized. DWC_usb31 and
@@ -228,9 +228,9 @@ static void __dwc3_set_mode(struct work_struct *work)*/ msleep (100 ); - reg =dwc3_readl (dwc->regs,DWC3_GCTL ); + reg =dwc3_readl (dwc,DWC3_GCTL ); reg &= ~DWC3_GCTL_CORESOFTRESET ; -dwc3_writel (dwc->regs,DWC3_GCTL , reg); +dwc3_writel (dwc,DWC3_GCTL , reg); }spin_lock_irqsave (&dwc->lock, flags);
@@ -254,9 +254,9 @@ static void __dwc3_set_mode(struct work_struct *work)phy_set_mode (dwc->usb3_generic_phy[i],PHY_MODE_USB_HOST );if (dwc->dis_split_quirk) { - reg =dwc3_readl (dwc->regs,DWC3_GUCTL3 ); + reg =dwc3_readl (dwc,DWC3_GUCTL3 ); reg |=DWC3_GUCTL3_SPLITDISABLE ; -dwc3_writel (dwc->regs,DWC3_GUCTL3 , reg); +dwc3_writel (dwc,DWC3_GUCTL3 , reg); } }break ;
@@ -306,11 +306,11 @@ u32 dwc3_core_fifo_space(struct dwc3_ep *dep, u8 type)struct dwc3 *dwc = dep->dwc;u32 reg; -dwc3_writel (dwc->regs,DWC3_GDBGFIFOSPACE , -DWC3_GDBGFIFOSPACE_NUM (dep->number) | -DWC3_GDBGFIFOSPACE_TYPE (type)); +dwc3_writel (dwc,DWC3_GDBGFIFOSPACE , +DWC3_GDBGFIFOSPACE_NUM (dep->number) | +DWC3_GDBGFIFOSPACE_TYPE (type)); - reg =dwc3_readl (dwc->regs,DWC3_GDBGFIFOSPACE ); + reg =dwc3_readl (dwc,DWC3_GDBGFIFOSPACE );return DWC3_GDBGFIFOSPACE_SPACE_AVAILABLE (reg); }
@@ -332,7 +332,7 @@ int dwc3_core_soft_reset(struct dwc3 *dwc)if (dwc->current_dr_role ==DWC3_GCTL_PRTCAP_HOST )return 0 ; - reg =dwc3_readl (dwc->regs,DWC3_DCTL ); + reg =dwc3_readl (dwc,DWC3_DCTL ); reg |=DWC3_DCTL_CSFTRST ; reg &= ~DWC3_DCTL_RUN_STOP ;dwc3_gadget_dctl_write_safe (dwc, reg);
@@ -347,7 +347,7 @@ int dwc3_core_soft_reset(struct dwc3 *dwc) retries =10 ; do { - reg = dwc3_readl(dwc->regs, DWC3_DCTL); + reg = dwc3_readl(dwc, DWC3_DCTL); if (!(reg & DWC3_DCTL_CSFTRST)) goto done;
@@ -387,12 +387,12 @@ static void dwc3_frame_length_adjustment(struct dwc3 *dwc)if (dwc->fladj ==0 )return ; - reg =dwc3_readl (dwc->regs,DWC3_GFLADJ ); + reg =dwc3_readl (dwc,DWC3_GFLADJ ); dft = reg &DWC3_GFLADJ_30MHZ_MASK ;if (dft != dwc->fladj) { reg &= ~DWC3_GFLADJ_30MHZ_MASK ; reg |=DWC3_GFLADJ_30MHZ_SDBND_SEL | dwc->fladj; -dwc3_writel (dwc->regs,DWC3_GFLADJ , reg); +dwc3_writel (dwc,DWC3_GFLADJ , reg); } }
@@ -424,10 +424,10 @@ static void dwc3_ref_clk_period(struct dwc3 *dwc)return ; } - reg =dwc3_readl (dwc->regs,DWC3_GUCTL ); + reg =dwc3_readl (dwc,DWC3_GUCTL ); reg &= ~DWC3_GUCTL_REFCLKPER_MASK ; reg |=FIELD_PREP (DWC3_GUCTL_REFCLKPER_MASK , period); -dwc3_writel (dwc->regs,DWC3_GUCTL , reg); +dwc3_writel (dwc,DWC3_GUCTL , reg); if (DWC3_VER_IS_PRIOR(DWC3, 250A))return ;
@@ -455,7 +455,7 @@ static void dwc3_ref_clk_period(struct dwc3 *dwc)*/ decr =480000000 / rate; - reg =dwc3_readl (dwc->regs,DWC3_GFLADJ ); + reg =dwc3_readl (dwc,DWC3_GFLADJ ); reg &= ~DWC3_GFLADJ_REFCLK_FLADJ_MASK & ~DWC3_GFLADJ_240MHZDECR & ~DWC3_GFLADJ_240MHZDECR_PLS1 ;
@@ -466,7 +466,7 @@ static void dwc3_ref_clk_period(struct dwc3 *dwc)if (dwc->gfladj_refclk_lpm_sel) reg |=DWC3_GFLADJ_REFCLK_LPM_SEL ; -dwc3_writel (dwc->regs,DWC3_GFLADJ , reg); +dwc3_writel (dwc,DWC3_GFLADJ , reg); }/**
@@ -569,16 +569,16 @@ int dwc3_event_buffers_setup(struct dwc3 *dwc) evt = dwc->ev_buf; evt->lpos =0 ; -dwc3_writel (dwc->regs,DWC3_GEVNTADRLO (0 ), -lower_32_bits (evt->dma)); -dwc3_writel (dwc->regs,DWC3_GEVNTADRHI (0 ), -upper_32_bits (evt->dma)); -dwc3_writel (dwc->regs,DWC3_GEVNTSIZ (0 ), -DWC3_GEVNTSIZ_SIZE (evt->length)); +dwc3_writel (dwc,DWC3_GEVNTADRLO (0 ), +lower_32_bits (evt->dma)); +dwc3_writel (dwc,DWC3_GEVNTADRHI (0 ), +upper_32_bits (evt->dma)); +dwc3_writel (dwc,DWC3_GEVNTSIZ (0 ), +DWC3_GEVNTSIZ_SIZE (evt->length));/* Clear any stale event */ - reg =dwc3_readl (dwc->regs,DWC3_GEVNTCOUNT (0 )); -dwc3_writel (dwc->regs,DWC3_GEVNTCOUNT (0 ), reg); + reg =dwc3_readl (dwc,DWC3_GEVNTCOUNT (0 )); +dwc3_writel (dwc,DWC3_GEVNTCOUNT (0 ), reg);return 0 ; }
@@ -593,7 +593,7 @@ void dwc3_event_buffers_cleanup(struct dwc3 *dwc)* Exynos platforms may not be able to access event buffer if the * controller failed to halt on dwc3_core_exit(). */ - reg =dwc3_readl (dwc->regs,DWC3_DSTS ); + reg =dwc3_readl (dwc,DWC3_DSTS );if (!(reg &DWC3_DSTS_DEVCTRLHLT ))return ;
@@ -601,14 +601,14 @@ void dwc3_event_buffers_cleanup(struct dwc3 *dwc) evt->lpos =0 ; -dwc3_writel (dwc->regs,DWC3_GEVNTADRLO (0 ),0 ); -dwc3_writel (dwc->regs,DWC3_GEVNTADRHI (0 ),0 ); -dwc3_writel (dwc->regs,DWC3_GEVNTSIZ (0 ),DWC3_GEVNTSIZ_INTMASK +dwc3_writel (dwc,DWC3_GEVNTADRLO (0 ),0 ); +dwc3_writel (dwc,DWC3_GEVNTADRHI (0 ),0 ); +dwc3_writel (dwc,DWC3_GEVNTSIZ (0 ),DWC3_GEVNTSIZ_INTMASK |DWC3_GEVNTSIZ_SIZE (0 ));/* Clear any stale event */ - reg =dwc3_readl (dwc->regs,DWC3_GEVNTCOUNT (0 )); -dwc3_writel (dwc->regs,DWC3_GEVNTCOUNT (0 ), reg); + reg =dwc3_readl (dwc,DWC3_GEVNTCOUNT (0 )); +dwc3_writel (dwc,DWC3_GEVNTCOUNT (0 ), reg); }static void dwc3_core_num_eps (struct dwc3 *dwc)
@@ -622,18 +622,18 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc) {struct dwc3_hwparams *parms = &dwc->hwparams; - parms->hwparams0 =dwc3_readl (dwc->regs,DWC3_GHWPARAMS0 ); - parms->hwparams1 =dwc3_readl (dwc->regs,DWC3_GHWPARAMS1 ); - parms->hwparams2 =dwc3_readl (dwc->regs,DWC3_GHWPARAMS2 ); - parms->hwparams3 =dwc3_readl (dwc->regs,DWC3_GHWPARAMS3 ); - parms->hwparams4 =dwc3_readl (dwc->regs,DWC3_GHWPARAMS4 ); - parms->hwparams5 =dwc3_readl (dwc->regs,DWC3_GHWPARAMS5 ); - parms->hwparams6 =dwc3_readl (dwc->regs,DWC3_GHWPARAMS6 ); - parms->hwparams7 =dwc3_readl (dwc->regs,DWC3_GHWPARAMS7 ); - parms->hwparams8 =dwc3_readl (dwc->regs,DWC3_GHWPARAMS8 ); + parms->hwparams0 =dwc3_readl (dwc,DWC3_GHWPARAMS0 ); + parms->hwparams1 =dwc3_readl (dwc,DWC3_GHWPARAMS1 ); + parms->hwparams2 =dwc3_readl (dwc,DWC3_GHWPARAMS2 ); + parms->hwparams3 =dwc3_readl (dwc,DWC3_GHWPARAMS3 ); + parms->hwparams4 =dwc3_readl (dwc,DWC3_GHWPARAMS4 ); + parms->hwparams5 =dwc3_readl (dwc,DWC3_GHWPARAMS5 ); + parms->hwparams6 =dwc3_readl (dwc,DWC3_GHWPARAMS6 ); + parms->hwparams7 =dwc3_readl (dwc,DWC3_GHWPARAMS7 ); + parms->hwparams8 =dwc3_readl (dwc,DWC3_GHWPARAMS8 );if (DWC3_IP_IS (DWC32 )) - parms->hwparams9 =dwc3_readl (dwc->regs,DWC3_GHWPARAMS9 ); + parms->hwparams9 =dwc3_readl (dwc,DWC3_GHWPARAMS9 ); }static void dwc3_config_soc_bus (struct dwc3 *dwc)
@@ -641,10 +641,10 @@ static void dwc3_config_soc_bus(struct dwc3 *dwc)if (dwc->gsbuscfg0_reqinfo !=DWC3_GSBUSCFG0_REQINFO_UNSPECIFIED ) {u32 reg; - reg =dwc3_readl (dwc->regs,DWC3_GSBUSCFG0 ); + reg =dwc3_readl (dwc,DWC3_GSBUSCFG0 ); reg &= ~DWC3_GSBUSCFG0_REQINFO (~0 ); reg |=DWC3_GSBUSCFG0_REQINFO (dwc->gsbuscfg0_reqinfo); -dwc3_writel (dwc->regs,DWC3_GSBUSCFG0 , reg); +dwc3_writel (dwc,DWC3_GSBUSCFG0 , reg); } }
@@ -668,7 +668,7 @@ static int dwc3_ss_phy_setup(struct dwc3 *dwc, int index) {u32 reg; - reg =dwc3_readl (dwc->regs,DWC3_GUSB3PIPECTL (index)); + reg =dwc3_readl (dwc,DWC3_GUSB3PIPECTL (index));/* * Make sure UX_EXIT_PX is cleared as that causes issues with some
@@ -706,7 +706,7 @@ static int dwc3_ss_phy_setup(struct dwc3 *dwc, int index)if (dwc->dis_del_phy_power_chg_quirk) reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE ; -dwc3_writel (dwc->regs,DWC3_GUSB3PIPECTL (index), reg); +dwc3_writel (dwc,DWC3_GUSB3PIPECTL (index), reg);return 0 ; }
@@ -715,7 +715,7 @@ static int dwc3_hs_phy_setup(struct dwc3 *dwc, int index) {u32 reg; - reg =dwc3_readl (dwc->regs,DWC3_GUSB2PHYCFG (index)); + reg =dwc3_readl (dwc,DWC3_GUSB2PHYCFG (index));/* Select the HS PHY interface */ switch (DWC3_GHWPARAMS3_HSPHY_IFC (dwc->hwparams.hwparams3)) {
@@ -727,7 +727,7 @@ static int dwc3_hs_phy_setup(struct dwc3 *dwc, int index) }else if (dwc->hsphy_interface && !strncmp (dwc->hsphy_interface,"ulpi" ,4 )) { reg |=DWC3_GUSB2PHYCFG_ULPI_UTMI ; -dwc3_writel (dwc->regs,DWC3_GUSB2PHYCFG (index), reg); +dwc3_writel (dwc,DWC3_GUSB2PHYCFG (index), reg); }else {/* Relying on default value. */ if (!(reg &DWC3_GUSB2PHYCFG_ULPI_UTMI ))
@@ -777,7 +777,7 @@ static int dwc3_hs_phy_setup(struct dwc3 *dwc, int index)if (dwc->ulpi_ext_vbus_drv) reg |=DWC3_GUSB2PHYCFG_ULPIEXTVBUSDRV ; -dwc3_writel (dwc->regs,DWC3_GUSB2PHYCFG (index), reg); +dwc3_writel (dwc,DWC3_GUSB2PHYCFG (index), reg);return 0 ; }
@@ -991,15 +991,15 @@ static bool dwc3_core_is_valid(struct dwc3 *dwc) {u32 reg; - reg =dwc3_readl (dwc->regs,DWC3_GSNPSID ); + reg =dwc3_readl (dwc,DWC3_GSNPSID ); dwc->ip =DWC3_GSNPS_ID (reg);/* This should read as U3 followed by revision number */ if (DWC3_IP_IS (DWC3 )) { dwc->revision = reg; }else if (DWC3_IP_IS (DWC31 ) ||DWC3_IP_IS (DWC32 )) { - dwc->revision =dwc3_readl (dwc->regs,DWC3_VER_NUMBER ); - dwc->version_type =dwc3_readl (dwc->regs,DWC3_VER_TYPE ); + dwc->revision =dwc3_readl (dwc,DWC3_VER_NUMBER ); + dwc->version_type =dwc3_readl (dwc,DWC3_VER_TYPE ); }else {return false; }
@@ -1013,7 +1013,7 @@ static void dwc3_core_setup_global_control(struct dwc3 *dwc)unsigned int hw_mode;u32 reg; - reg =dwc3_readl (dwc->regs,DWC3_GCTL ); + reg =dwc3_readl (dwc,DWC3_GCTL ); reg &= ~DWC3_GCTL_SCALEDOWN_MASK ; hw_mode =DWC3_GHWPARAMS0_MODE (dwc->hwparams.hwparams0); power_opt =DWC3_GHWPARAMS1_EN_PWROPT (dwc->hwparams.hwparams1);
@@ -1091,7 +1091,7 @@ static void dwc3_core_setup_global_control(struct dwc3 *dwc) if (DWC3_VER_IS_PRIOR(DWC3, 190A)) reg |=DWC3_GCTL_U2RSTECN ; -dwc3_writel (dwc->regs,DWC3_GCTL , reg); +dwc3_writel (dwc,DWC3_GCTL , reg); }static int dwc3_core_get_phy (struct dwc3 *dwc);
@@ -1111,7 +1111,7 @@ static void dwc3_set_incr_burst_type(struct dwc3 *dwc)int ret;int i; - cfg =dwc3_readl (dwc->regs,DWC3_GSBUSCFG0 ); + cfg =dwc3_readl (dwc,DWC3_GSBUSCFG0 );/* * Handle property "snps,incr-burst-type-adjustment".
@@ -1186,7 +1186,7 @@ static void dwc3_set_incr_burst_type(struct dwc3 *dwc)break ; } -dwc3_writel (dwc->regs,DWC3_GSBUSCFG0 , cfg); +dwc3_writel (dwc,DWC3_GSBUSCFG0 , cfg); }static void dwc3_set_power_down_clk_scale (struct dwc3 *dwc)
@@ -1211,12 +1211,12 @@ static void dwc3_set_power_down_clk_scale(struct dwc3 *dwc)* (3x or more) to be within the requirement. */ scale =DIV_ROUND_UP (clk_get_rate (dwc->susp_clk),16000 ); - reg =dwc3_readl (dwc->regs,DWC3_GCTL ); + reg =dwc3_readl (dwc,DWC3_GCTL );if ((reg &DWC3_GCTL_PWRDNSCALE_MASK ) <DWC3_GCTL_PWRDNSCALE (scale) || (reg &DWC3_GCTL_PWRDNSCALE_MASK ) >DWC3_GCTL_PWRDNSCALE (scale*3 )) { reg &= ~(DWC3_GCTL_PWRDNSCALE_MASK ); reg |=DWC3_GCTL_PWRDNSCALE (scale); -dwc3_writel (dwc->regs,DWC3_GCTL , reg); +dwc3_writel (dwc,DWC3_GCTL , reg); } }
@@ -1239,7 +1239,7 @@ static void dwc3_config_threshold(struct dwc3 *dwc) tx_maxburst = dwc->tx_max_burst_prd;if (rx_thr_num && rx_maxburst) { - reg =dwc3_readl (dwc->regs,DWC3_GRXTHRCFG ); + reg =dwc3_readl (dwc,DWC3_GRXTHRCFG ); reg |=DWC31_RXTHRNUMPKTSEL_PRD ; reg &= ~DWC31_RXTHRNUMPKT_PRD (~0 );
@@ -1248,11 +1248,11 @@ static void dwc3_config_threshold(struct dwc3 *dwc) reg &= ~DWC31_MAXRXBURSTSIZE_PRD (~0 ); reg |=DWC31_MAXRXBURSTSIZE_PRD (rx_maxburst); -dwc3_writel (dwc->regs,DWC3_GRXTHRCFG , reg); +dwc3_writel (dwc,DWC3_GRXTHRCFG , reg); }if (tx_thr_num && tx_maxburst) { - reg =dwc3_readl (dwc->regs,DWC3_GTXTHRCFG ); + reg =dwc3_readl (dwc,DWC3_GTXTHRCFG ); reg |=DWC31_TXTHRNUMPKTSEL_PRD ; reg &= ~DWC31_TXTHRNUMPKT_PRD (~0 );
@@ -1261,7 +1261,7 @@ static void dwc3_config_threshold(struct dwc3 *dwc) reg &= ~DWC31_MAXTXBURSTSIZE_PRD (~0 ); reg |=DWC31_MAXTXBURSTSIZE_PRD (tx_maxburst); -dwc3_writel (dwc->regs,DWC3_GTXTHRCFG , reg); +dwc3_writel (dwc,DWC3_GTXTHRCFG , reg); } }
@@ -1272,7 +1272,7 @@ static void dwc3_config_threshold(struct dwc3 *dwc)if (DWC3_IP_IS (DWC3 )) {if (rx_thr_num && rx_maxburst) { - reg =dwc3_readl (dwc->regs,DWC3_GRXTHRCFG ); + reg =dwc3_readl (dwc,DWC3_GRXTHRCFG ); reg |=DWC3_GRXTHRCFG_PKTCNTSEL ; reg &= ~DWC3_GRXTHRCFG_RXPKTCNT (~0 );
@@ -1281,11 +1281,11 @@ static void dwc3_config_threshold(struct dwc3 *dwc) reg &= ~DWC3_GRXTHRCFG_MAXRXBURSTSIZE (~0 ); reg |=DWC3_GRXTHRCFG_MAXRXBURSTSIZE (rx_maxburst); -dwc3_writel (dwc->regs,DWC3_GRXTHRCFG , reg); +dwc3_writel (dwc,DWC3_GRXTHRCFG , reg); }if (tx_thr_num && tx_maxburst) { - reg =dwc3_readl (dwc->regs,DWC3_GTXTHRCFG ); + reg =dwc3_readl (dwc,DWC3_GTXTHRCFG ); reg |=DWC3_GTXTHRCFG_PKTCNTSEL ; reg &= ~DWC3_GTXTHRCFG_TXPKTCNT (~0 );
@@ -1294,11 +1294,11 @@ static void dwc3_config_threshold(struct dwc3 *dwc) reg &= ~DWC3_GTXTHRCFG_MAXTXBURSTSIZE (~0 ); reg |=DWC3_GTXTHRCFG_MAXTXBURSTSIZE (tx_maxburst); -dwc3_writel (dwc->regs,DWC3_GTXTHRCFG , reg); +dwc3_writel (dwc,DWC3_GTXTHRCFG , reg); } }else {if (rx_thr_num && rx_maxburst) { - reg =dwc3_readl (dwc->regs,DWC3_GRXTHRCFG ); + reg =dwc3_readl (dwc,DWC3_GRXTHRCFG ); reg |=DWC31_GRXTHRCFG_PKTCNTSEL ; reg &= ~DWC31_GRXTHRCFG_RXPKTCNT (~0 );
@@ -1307,11 +1307,11 @@ static void dwc3_config_threshold(struct dwc3 *dwc) reg &= ~DWC31_GRXTHRCFG_MAXRXBURSTSIZE (~0 ); reg |=DWC31_GRXTHRCFG_MAXRXBURSTSIZE (rx_maxburst); -dwc3_writel (dwc->regs,DWC3_GRXTHRCFG , reg); +dwc3_writel (dwc,DWC3_GRXTHRCFG , reg); }if (tx_thr_num && tx_maxburst) { - reg =dwc3_readl (dwc->regs,DWC3_GTXTHRCFG ); + reg =dwc3_readl (dwc,DWC3_GTXTHRCFG ); reg |=DWC31_GTXTHRCFG_PKTCNTSEL ; reg &= ~DWC31_GTXTHRCFG_TXPKTCNT (~0 );
@@ -1320,7 +1320,7 @@ static void dwc3_config_threshold(struct dwc3 *dwc) reg &= ~DWC31_GTXTHRCFG_MAXTXBURSTSIZE (~0 ); reg |=DWC31_GTXTHRCFG_MAXTXBURSTSIZE (tx_maxburst); -dwc3_writel (dwc->regs,DWC3_GTXTHRCFG , reg); +dwc3_writel (dwc,DWC3_GTXTHRCFG , reg); } } }
@@ -1343,7 +1343,7 @@ int dwc3_core_init(struct dwc3 *dwc)* Write Linux Version Code to our GUID register so it's easy to figure * out which kernel version a bug was found. */ -dwc3_writel (dwc->regs,DWC3_GUID ,LINUX_VERSION_CODE ); +dwc3_writel (dwc,DWC3_GUID ,LINUX_VERSION_CODE ); ret =dwc3_phy_setup (dwc);if (ret)
@@ -1408,9 +1408,9 @@ int dwc3_core_init(struct dwc3 *dwc)* DWC_usb31 controller. */ if (DWC3_VER_IS_WITHIN(DWC3, 310A, ANY)) { - reg =dwc3_readl (dwc->regs,DWC3_GUCTL2 ); + reg =dwc3_readl (dwc,DWC3_GUCTL2 ); reg |=DWC3_GUCTL2_RST_ACTBITLATER ; -dwc3_writel (dwc->regs,DWC3_GUCTL2 , reg); +dwc3_writel (dwc,DWC3_GUCTL2 , reg); }/*
@@ -1423,9 +1423,9 @@ int dwc3_core_init(struct dwc3 *dwc)* setting GUCTL2[19] by default; instead, use GUCTL2[19] = 0. */ if (DWC3_VER_IS(DWC3, 320A)) { - reg =dwc3_readl (dwc->regs,DWC3_GUCTL2 ); + reg =dwc3_readl (dwc,DWC3_GUCTL2 ); reg &= ~DWC3_GUCTL2_LC_TIMER ; -dwc3_writel (dwc->regs,DWC3_GUCTL2 , reg); +dwc3_writel (dwc,DWC3_GUCTL2 , reg); }/*
@@ -1438,13 +1438,13 @@ int dwc3_core_init(struct dwc3 *dwc)* legacy ULPI PHYs. */ if (dwc->resume_hs_terminations) { - reg =dwc3_readl (dwc->regs,DWC3_GUCTL1 ); + reg =dwc3_readl (dwc,DWC3_GUCTL1 ); reg |=DWC3_GUCTL1_RESUME_OPMODE_HS_HOST ; -dwc3_writel (dwc->regs,DWC3_GUCTL1 , reg); +dwc3_writel (dwc,DWC3_GUCTL1 , reg); } if (!DWC3_VER_IS_PRIOR(DWC3, 250A)) { - reg =dwc3_readl (dwc->regs,DWC3_GUCTL1 ); + reg =dwc3_readl (dwc,DWC3_GUCTL1 );/* * Enable hardware control of sending remote wakeup
@@ -1479,7 +1479,7 @@ int dwc3_core_init(struct dwc3 *dwc) reg &= ~DWC3_GUCTL1_DEV_FORCE_20_CLK_FOR_30_CLK ; } -dwc3_writel (dwc->regs,DWC3_GUCTL1 , reg); +dwc3_writel (dwc,DWC3_GUCTL1 , reg); }dwc3_config_threshold (dwc);
@@ -1490,9 +1490,9 @@ int dwc3_core_init(struct dwc3 *dwc)int i;for (i =0 ; i < dwc->num_usb3_ports; i++) { - reg =dwc3_readl (dwc->regs,DWC3_LLUCTL (i)); + reg =dwc3_readl (dwc,DWC3_LLUCTL (i)); reg |=DWC3_LLUCTL_FORCE_GEN1 ; -dwc3_writel (dwc->regs,DWC3_LLUCTL (i), reg); +dwc3_writel (dwc,DWC3_LLUCTL (i), reg); } }
@@ -1511,9 +1511,9 @@ int dwc3_core_init(struct dwc3 *dwc)* function is available only from version 1.70a. */ if (DWC3_VER_IS_WITHIN(DWC31, 170A, 180A)) { - reg =dwc3_readl (dwc->regs,DWC3_GUCTL3 ); + reg =dwc3_readl (dwc,DWC3_GUCTL3 ); reg |=DWC3_GUCTL3_USB20_RETRY_DISABLE ; -dwc3_writel (dwc->regs,DWC3_GUCTL3 , reg); +dwc3_writel (dwc,DWC3_GUCTL3 , reg); }return 0 ;
@@ -2437,9 +2437,9 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)int ret;if (!pm_runtime_suspended (dwc->dev) && !PMSG_IS_AUTO (msg)) { - dwc->susphy_state = (dwc3_readl (dwc->regs,DWC3_GUSB2PHYCFG (0 )) & + dwc->susphy_state = (dwc3_readl (dwc,DWC3_GUSB2PHYCFG (0 )) &DWC3_GUSB2PHYCFG_SUSPHY ) || - (dwc3_readl (dwc->regs,DWC3_GUSB3PIPECTL (0 )) & + (dwc3_readl (dwc,DWC3_GUSB3PIPECTL (0 )) &DWC3_GUSB3PIPECTL_SUSPHY );/* * TI AM62 platform requires SUSPHY to be
@@ -2469,10 +2469,10 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)if (dwc->dis_u2_susphy_quirk || dwc->dis_enblslpm_quirk) {for (i =0 ; i < dwc->num_usb2_ports; i++) { - reg =dwc3_readl (dwc->regs,DWC3_GUSB2PHYCFG (i)); + reg =dwc3_readl (dwc,DWC3_GUSB2PHYCFG (i)); reg |=DWC3_GUSB2PHYCFG_ENBLSLPM |DWC3_GUSB2PHYCFG_SUSPHY ; -dwc3_writel (dwc->regs,DWC3_GUSB2PHYCFG (i), reg); +dwc3_writel (dwc,DWC3_GUSB2PHYCFG (i), reg); }/* Give some time for USB2 PHY to suspend */
@@ -2532,14 +2532,14 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) }/* Restore GUSB2PHYCFG bits that were modified in suspend */ for (i =0 ; i < dwc->num_usb2_ports; i++) { - reg =dwc3_readl (dwc->regs,DWC3_GUSB2PHYCFG (i)); + reg =dwc3_readl (dwc,DWC3_GUSB2PHYCFG (i));if (dwc->dis_u2_susphy_quirk) reg &= ~DWC3_GUSB2PHYCFG_SUSPHY ;if (dwc->dis_enblslpm_quirk) reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM ; -dwc3_writel (dwc->regs,DWC3_GUSB2PHYCFG (i), reg); +dwc3_writel (dwc,DWC3_GUSB2PHYCFG (i), reg); }for (i =0 ; i < dwc->num_usb2_ports; i++)
@@ -2721,9 +2721,9 @@ void dwc3_pm_complete(struct dwc3 *dwc)if (dwc->current_dr_role ==DWC3_GCTL_PRTCAP_HOST && dwc->dis_split_quirk) { - reg =dwc3_readl (dwc->regs,DWC3_GUCTL3 ); + reg =dwc3_readl (dwc,DWC3_GUCTL3 ); reg |=DWC3_GUCTL3_SPLITDISABLE ; -dwc3_writel (dwc->regs,DWC3_GUCTL3 , reg); +dwc3_writel (dwc,DWC3_GUCTL3 , reg); } }EXPORT_SYMBOL_GPL (dwc3_pm_complete);
drivers/usb/dwc3/debugfs.c +16 -16
@@ -296,14 +296,14 @@ static void dwc3_host_lsp(struct seq_file *s) reg =DWC3_GDBGLSPMUX_HOSTSELECT (sel); -dwc3_writel (dwc->regs,DWC3_GDBGLSPMUX , reg); - val =dwc3_readl (dwc->regs,DWC3_GDBGLSP ); +dwc3_writel (dwc,DWC3_GDBGLSPMUX , reg); + val =dwc3_readl (dwc,DWC3_GDBGLSP );seq_printf (s,"GDBGLSP[%d] = 0x%08x\n" , sel, val);if (dbc_enabled && sel <256 ) { reg |=DWC3_GDBGLSPMUX_ENDBC ; -dwc3_writel (dwc->regs,DWC3_GDBGLSPMUX , reg); - val =dwc3_readl (dwc->regs,DWC3_GDBGLSP ); +dwc3_writel (dwc,DWC3_GDBGLSPMUX , reg); + val =dwc3_readl (dwc,DWC3_GDBGLSP );seq_printf (s,"GDBGLSP_DBC[%d] = 0x%08x\n" , sel, val); } }
@@ -316,8 +316,8 @@ static void dwc3_gadget_lsp(struct seq_file *s)for (i =0 ; i <16 ; i++) { reg =DWC3_GDBGLSPMUX_DEVSELECT (i); -dwc3_writel (dwc->regs,DWC3_GDBGLSPMUX , reg); - reg =dwc3_readl (dwc->regs,DWC3_GDBGLSP ); +dwc3_writel (dwc,DWC3_GDBGLSPMUX , reg); + reg =dwc3_readl (dwc,DWC3_GDBGLSP );seq_printf (s,"GDBGLSP[%d] = 0x%08x\n" , i, reg); } }
@@ -335,7 +335,7 @@ static int dwc3_lsp_show(struct seq_file *s, void *unused)return ret;spin_lock_irqsave (&dwc->lock, flags); - reg =dwc3_readl (dwc->regs,DWC3_GSTS ); + reg =dwc3_readl (dwc,DWC3_GSTS ); current_mode =DWC3_GSTS_CURMOD (reg);switch (current_mode) {
@@ -406,7 +406,7 @@ static int dwc3_mode_show(struct seq_file *s, void *unused)return ret;spin_lock_irqsave (&dwc->lock, flags); - reg =dwc3_readl (dwc->regs,DWC3_GCTL ); + reg =dwc3_readl (dwc,DWC3_GCTL );spin_unlock_irqrestore (&dwc->lock, flags); mode =DWC3_GCTL_PRTCAP (reg);
@@ -478,7 +478,7 @@ static int dwc3_testmode_show(struct seq_file *s, void *unused)return ret;spin_lock_irqsave (&dwc->lock, flags); - reg =dwc3_readl (dwc->regs,DWC3_DCTL ); + reg =dwc3_readl (dwc,DWC3_DCTL ); reg &=DWC3_DCTL_TSTCTRL_MASK ; reg >>=1 ;spin_unlock_irqrestore (&dwc->lock, flags);
@@ -577,7 +577,7 @@ static int dwc3_link_state_show(struct seq_file *s, void *unused)return ret;spin_lock_irqsave (&dwc->lock, flags); - reg =dwc3_readl (dwc->regs,DWC3_GSTS ); + reg =dwc3_readl (dwc,DWC3_GSTS );if (DWC3_GSTS_CURMOD (reg) !=DWC3_GSTS_CURMOD_DEVICE ) {seq_puts (s,"Not available\n" );spin_unlock_irqrestore (&dwc->lock, flags);
@@ -585,7 +585,7 @@ static int dwc3_link_state_show(struct seq_file *s, void *unused)return 0 ; } - reg =dwc3_readl (dwc->regs,DWC3_DSTS ); + reg =dwc3_readl (dwc,DWC3_DSTS ); state =DWC3_DSTS_USBLNKST (reg); speed = reg &DWC3_DSTS_CONNECTSPD ;
@@ -639,14 +639,14 @@ static ssize_t dwc3_link_state_write(struct file *file,return ret;spin_lock_irqsave (&dwc->lock, flags); - reg =dwc3_readl (dwc->regs,DWC3_GSTS ); + reg =dwc3_readl (dwc,DWC3_GSTS );if (DWC3_GSTS_CURMOD (reg) !=DWC3_GSTS_CURMOD_DEVICE ) {spin_unlock_irqrestore (&dwc->lock, flags);pm_runtime_put_sync (dwc->dev);return -EINVAL ; } - reg =dwc3_readl (dwc->regs,DWC3_DSTS ); + reg =dwc3_readl (dwc,DWC3_DSTS ); speed = reg &DWC3_DSTS_CONNECTSPD ; if (speed < DWC3_DSTS_SUPERSPEED &&
@@ -942,10 +942,10 @@ static int dwc3_ep_info_register_show(struct seq_file *s, void *unused)spin_lock_irqsave (&dwc->lock, flags); reg =DWC3_GDBGLSPMUX_EPSELECT (dep->number); -dwc3_writel (dwc->regs,DWC3_GDBGLSPMUX , reg); +dwc3_writel (dwc,DWC3_GDBGLSPMUX , reg); - lower_32_bits =dwc3_readl (dwc->regs,DWC3_GDBGEPINFO0 ); - upper_32_bits =dwc3_readl (dwc->regs,DWC3_GDBGEPINFO1 ); + lower_32_bits =dwc3_readl (dwc,DWC3_GDBGEPINFO0 ); + upper_32_bits =dwc3_readl (dwc,DWC3_GDBGEPINFO1 ); ep_info = ((u64 )upper_32_bits <<32 ) | lower_32_bits;seq_printf (s,"0x%016llx\n" , ep_info);
drivers/usb/dwc3/drd.c +38 -38
209 lines not on this page · raw message
drivers/usb/dwc3/ep0.c +10 -10
@@ -361,7 +361,7 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc,if ((dwc->speed ==DWC3_DSTS_SUPERSPEED ) || (dwc->speed ==DWC3_DSTS_SUPERSPEED_PLUS )) { - reg =dwc3_readl (dwc->regs,DWC3_DCTL ); + reg =dwc3_readl (dwc,DWC3_DCTL );if (reg &DWC3_DCTL_INITU1ENA ) usb_status |=1 <<USB_DEV_STAT_U1_ENABLED ;if (reg &DWC3_DCTL_INITU2ENA )
@@ -417,12 +417,12 @@ static int dwc3_ep0_handle_u1(struct dwc3 *dwc, enum usb_device_state state,if (set && dwc->dis_u1_entry_quirk)return -EINVAL ; - reg =dwc3_readl (dwc->regs,DWC3_DCTL ); + reg =dwc3_readl (dwc,DWC3_DCTL );if (set) reg |=DWC3_DCTL_INITU1ENA ;else reg &= ~DWC3_DCTL_INITU1ENA ; -dwc3_writel (dwc->regs,DWC3_DCTL , reg); +dwc3_writel (dwc,DWC3_DCTL , reg);return 0 ; }
@@ -441,12 +441,12 @@ static int dwc3_ep0_handle_u2(struct dwc3 *dwc, enum usb_device_state state,if (set && dwc->dis_u2_entry_quirk)return -EINVAL ; - reg =dwc3_readl (dwc->regs,DWC3_DCTL ); + reg =dwc3_readl (dwc,DWC3_DCTL );if (set) reg |=DWC3_DCTL_INITU2ENA ;else reg &= ~DWC3_DCTL_INITU2ENA ; -dwc3_writel (dwc->regs,DWC3_DCTL , reg); +dwc3_writel (dwc,DWC3_DCTL , reg);return 0 ; }
@@ -612,10 +612,10 @@ static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)return -EINVAL ; } - reg =dwc3_readl (dwc->regs,DWC3_DCFG ); + reg =dwc3_readl (dwc,DWC3_DCFG ); reg &= ~(DWC3_DCFG_DEVADDR_MASK ); reg |=DWC3_DCFG_DEVADDR (addr); -dwc3_writel (dwc->regs,DWC3_DCFG , reg); +dwc3_writel (dwc,DWC3_DCFG , reg);if (addr)usb_gadget_set_state (dwc->gadget,USB_STATE_ADDRESS );
@@ -672,12 +672,12 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)* Enable transition to U1/U2 state when * nothing is pending from application. */ - reg =dwc3_readl (dwc->regs,DWC3_DCTL ); + reg =dwc3_readl (dwc,DWC3_DCTL );if (!dwc->dis_u1_entry_quirk) reg |=DWC3_DCTL_ACCEPTU1ENA ;if (!dwc->dis_u2_entry_quirk) reg |=DWC3_DCTL_ACCEPTU2ENA ; -dwc3_writel (dwc->regs,DWC3_DCTL , reg); +dwc3_writel (dwc,DWC3_DCTL , reg); }break ;
@@ -717,7 +717,7 @@ static void dwc3_ep0_set_sel_cmpl(struct usb_ep *ep, struct usb_request *req) dwc->u2sel =le16_to_cpu (timing.u2sel); dwc->u2pel =le16_to_cpu (timing.u2pel); - reg =dwc3_readl (dwc->regs,DWC3_DCTL ); + reg =dwc3_readl (dwc,DWC3_DCTL );if (reg &DWC3_DCTL_INITU2ENA ) param = dwc->u2pel;if (reg &DWC3_DCTL_INITU1ENA )
drivers/usb/dwc3/gadget.c +80 -80
510 lines not on this page · raw message
drivers/usb/dwc3/gadget.h +2 -2
@@ -132,7 +132,7 @@ static inline void dwc3_gadget_ep_get_transfer_index(struct dwc3_ep *dep) {u32 res_id; - res_id =dwc3_readl (dep->dwc->regs,DWC3_DEPCMD (dep->number)); + res_id =dwc3_readl (dep->dwc,DWC3_DEPCMD (dep->number)); dep->resource_index =DWC3_DEPCMD_GET_RSC_IDX (res_id); }
@@ -147,7 +147,7 @@ static inline void dwc3_gadget_ep_get_transfer_index(struct dwc3_ep *dep)static inline void dwc3_gadget_dctl_write_safe (struct dwc3 *dwc,u32 value) { value &= ~DWC3_DCTL_ULSTCHNGREQ_MASK ; -dwc3_writel (dwc->regs,DWC3_DCTL , value); +dwc3_writel (dwc,DWC3_DCTL , value); }#endif /* __DRIVERS_USB_DWC3_GADGET_H */
drivers/usb/dwc3/io.h +5 -2
@@ -16,9 +16,10 @@#include "debug.h" #include "core.h" -static inline u32 dwc3_readl (void __iomem *base,u32 offset) +static inline u32 dwc3_readl (struct dwc3 *dwc,u32 offset) {u32 value; +void __iomem *base = dwc->regs;/* * We requested the mem region starting from the Globals address
@@ -37,8 +38,10 @@ static inline u32 dwc3_readl(void __iomem *base, u32 offset)return value; } -static inline void dwc3_writel (void __iomem *base,u32 offset,u32 value) +static inline void dwc3_writel (struct dwc3 *dwc,u32 offset,u32 value) { +void __iomem *base = dwc->regs; +/* * We requested the mem region starting from the Globals address * space, see dwc3_probe in core.c.
drivers/usb/dwc3/ulpi.c +5 -5
@@ -33,13 +33,13 @@ static int dwc3_ulpi_busyloop(struct dwc3 *dwc, u8 addr, bool read)if (read) ns +=DWC3_ULPI_BASE_DELAY ; - reg =dwc3_readl (dwc->regs,DWC3_GUSB2PHYCFG (0 )); + reg =dwc3_readl (dwc,DWC3_GUSB2PHYCFG (0 ));if (reg &DWC3_GUSB2PHYCFG_SUSPHY )usleep_range (1000 ,1200 );while (count--) {ndelay (ns); - reg =dwc3_readl (dwc->regs,DWC3_GUSB2PHYACC (0 )); + reg =dwc3_readl (dwc,DWC3_GUSB2PHYACC (0 ));if (reg &DWC3_GUSB2PHYACC_DONE )return 0 ;cpu_relax ();
@@ -55,13 +55,13 @@ static int dwc3_ulpi_read(struct device *dev, u8 addr)int ret; reg =DWC3_GUSB2PHYACC_NEWREGREQ |DWC3_ULPI_ADDR (addr); -dwc3_writel (dwc->regs,DWC3_GUSB2PHYACC (0 ), reg); +dwc3_writel (dwc,DWC3_GUSB2PHYACC (0 ), reg); ret =dwc3_ulpi_busyloop (dwc, addr, true);if (ret)return ret; - reg =dwc3_readl (dwc->regs,DWC3_GUSB2PHYACC (0 )); + reg =dwc3_readl (dwc,DWC3_GUSB2PHYACC (0 ));return DWC3_GUSB2PHYACC_DATA (reg); }
@@ -73,7 +73,7 @@ static int dwc3_ulpi_write(struct device *dev, u8 addr, u8 val) reg =DWC3_GUSB2PHYACC_NEWREGREQ |DWC3_ULPI_ADDR (addr); reg |=DWC3_GUSB2PHYACC_WRITE | val; -dwc3_writel (dwc->regs,DWC3_GUSB2PHYACC (0 ), reg); +dwc3_writel (dwc,DWC3_GUSB2PHYACC (0 ), reg);return dwc3_ulpi_busyloop (dwc, addr, false); }
Signature · 1 line
2.34.1
PATCH v4 3/3 usb: dwc3: Log dwc3 address in traces
In reply to Prashanth KWhen multiple DWC3 controllers are being used, trace events from different instances get mixed up making debugging difficult as there's no way to distinguish which instance generated the trace.
Use the register base address of dwc3 controller and append it to trace events, so that the source instance is clearly identifiable.
Example trace output,
before -> dwc3_event: event (00000101): Reset [U0] after -> dwc3_event: 0a600000: event (00000101): Reset [U0]
--- drivers/usb/dwc3/core.c | 5 ++- drivers/usb/dwc3/core.h | 2 + drivers/usb/dwc3/ep0.c | 2 +- drivers/usb/dwc3/gadget.c | 2 +- drivers/usb/dwc3/io.h | 4 +- drivers/usb/dwc3/trace.h | 88 ++++++++++++++++++++++++--------------- 6 files changed, 65 insertions(+), 38 deletions(-)
drivers/usb/dwc3/core.c +4 -1
@@ -158,7 +158,7 @@ void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode, bool ignore_susphy)dwc3_writel (dwc,DWC3_GCTL , reg); dwc->current_dr_role = mode; -trace_dwc3_set_prtcap (mode); +trace_dwc3_set_prtcap (dwc, mode); }EXPORT_SYMBOL_GPL (dwc3_set_prtcap);
@@ -2193,6 +2193,9 @@ int dwc3_core_probe(const struct dwc3_probe_data *data) dwc_res = *res; dwc_res.start +=DWC3_GLOBALS_REGS_START ; +/* Store the base register address for using it in traces later */ + dwc->address = (u32 )res->start; +if (dev->of_node) {struct device_node *parent =of_get_parent (dev->of_node);
drivers/usb/dwc3/core.h +2 -0
@@ -1043,6 +1043,7 @@ struct dwc3_glue_ops {* @gadget_max_speed: maximum gadget speed requested * @gadget_ssp_rate: Gadget driver's maximum supported SuperSpeed Plus signaling * rate and lane count. +* @address: Cached lower 32-bit base address to be used for logging. * @ip: controller's ID * @revision: controller's version of an IP * @version_type: VERSIONTYPE register contents, a sub release of a revision
@@ -1258,6 +1259,7 @@ struct dwc3 {enum usb_ssp_rate max_ssp_rate;enum usb_ssp_rate gadget_ssp_rate; +u32 address;u32 ip;#define DWC3_IP 0x5533
drivers/usb/dwc3/ep0.c +1 -1
@@ -833,7 +833,7 @@ static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,if (!dwc->gadget_driver || !dwc->softconnect || !dwc->connected) goto out; -trace_dwc3_ctrl_req (ctrl); +trace_dwc3_ctrl_req (dwc, ctrl); len =le16_to_cpu (ctrl->wLength);if (!len) {
drivers/usb/dwc3/gadget.c +1 -1
@@ -278,7 +278,7 @@ int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned int cmd, status = -ETIMEDOUT ; } -trace_dwc3_gadget_generic_cmd (cmd, param, status); +trace_dwc3_gadget_generic_cmd (dwc, cmd, param, status);return ret; }
drivers/usb/dwc3/io.h +2 -2
@@ -33,7 +33,7 @@ static inline u32 dwc3_readl(struct dwc3 *dwc, u32 offset)* documentation, so we revert it back to the proper addresses, the * same way they are described on SNPS documentation */ -trace_dwc3_readl (base -DWC3_GLOBALS_REGS_START , offset, value); +trace_dwc3_readl (dwc, base -DWC3_GLOBALS_REGS_START , offset, value);return value; }
@@ -54,7 +54,7 @@ static inline void dwc3_writel(struct dwc3 *dwc, u32 offset, u32 value)* documentation, so we revert it back to the proper addresses, the * same way they are described on SNPS documentation */ - trace_dwc3_writel(base - DWC3_GLOBALS_REGS_START, offset, value); + trace_dwc3_writel(dwc, base - DWC3_GLOBALS_REGS_START, offset, value); }#endif /* __DRIVERS_USB_DWC3_IO_H */
drivers/usb/dwc3/trace.h +55 -33
257 lines not on this page · raw message
Signature · 1 line
2.34.1
Greg Kroah-Hartman
maintainerRe: [PATCH v4 3/3] usb: dwc3: Log dwc3 address in traces
Quoted 1 line · Prashanth K
+ * @address: Cached lower 32-bit base address to be used for logging.
Why are 32bits enough / ok? Why not use the full 64 that you really have? What happens if you have 2 devices with just the upper 32 bits different?
This is a resource value, so why not use the proper type for it?
thanks,
greg k-h
Thinh Nguyen
maintainerRe: [PATCH v4 3/3] usb: dwc3: Log dwc3 address in traces
Quoted 9 lines · Greg Kroah-Hartman
Quoted 1 line · Prashanth K
+ * @address: Cached lower 32-bit base address to be used for logging.
Why are 32bits enough / ok? Why not use the full 64 that you really have? What happens if you have 2 devices with just the upper 32 bits different?
This is a resource value, so why not use the proper type for it?
This is only intented to be used for logging, so I suggested to use u32. I want to avoid treating this struct member as a phys_addr_t where it may be misused.
As for the reason to capture only the lower 32-bit, it's just base on what I've seen so far. That I have not seen designs where the 2 or more instances are placed that far apart and share the same lower 32-bit. It's a bit nicer to shorten the address print at the start of a tracepoint. But if it's insufficient, there's no problem with using 64-bit.
BR,
Thinh
Thinh Nguyen
maintainerRe: [PATCH v4 3/3] usb: dwc3: Log dwc3 address in traces
Quoted 15 lines · Thinh Nguyen
Quoted 9 lines · Greg Kroah-Hartman
Quoted 1 line · Prashanth K
+ * @address: Cached lower 32-bit base address to be used for logging.
Why are 32bits enough / ok? Why not use the full 64 that you really have? What happens if you have 2 devices with just the upper 32 bits different?
This is a resource value, so why not use the proper type for it?
This is only intented to be used for logging, so I suggested to use u32. I want to avoid treating this struct member as a
phys_addr_twhere it may be misused.
Quoted 7 lines
As for the reason to capture only the lower 32-bit, it's just base on what I've seen so far. That I have not seen designs where the 2 or more instances are placed that far apart and share the same lower 32-bit. It's a bit nicer to shorten the address print at the start of a tracepoint. But if it's insufficient, there's no problem with using 64-bit.
Or we can just remove this and print the address from dwc->xhci_resources[0].start.
BR,
Thinh
Greg Kroah-Hartman
maintainerRe: [PATCH v4 3/3] usb: dwc3: Log dwc3 address in traces
Quoted 24 lines · Thinh Nguyen
Quoted 15 lines · Thinh Nguyen
Quoted 9 lines · Greg Kroah-Hartman
Quoted 1 line · Prashanth K
+ * @address: Cached lower 32-bit base address to be used for logging.
Why are 32bits enough / ok? Why not use the full 64 that you really have? What happens if you have 2 devices with just the upper 32 bits different?
This is a resource value, so why not use the proper type for it?
This is only intented to be used for logging, so I suggested to use u32. I want to avoid treating this struct member as a
phys_addr_twhere it may be misused.Quoted 7 lines
As for the reason to capture only the lower 32-bit, it's just base on what I've seen so far. That I have not seen designs where the 2 or more instances are placed that far apart and share the same lower 32-bit. It's a bit nicer to shorten the address print at the start of a tracepoint. But if it's insufficient, there's no problem with using 64-bit.
Quoted 2 lines
Or we can just remove this and print the address from dwc->xhci_resources[0].start.
I thought I asked for that a few revisions ago :)
I'd prefer that, instead of saving off a value that you can look up if you need it.
thanks,
greg k-h
Thinh Nguyen
maintainerRe: [PATCH v4 3/3] usb: dwc3: Log dwc3 address in traces
Quoted 25 lines · Greg Kroah-Hartman
Quoted 24 lines · Thinh Nguyen
Quoted 22 lines · Thinh Nguyen
Quoted 9 lines · Greg Kroah-Hartman
Quoted 1 line · Prashanth K
+ * @address: Cached lower 32-bit base address to be used for logging.
Why are 32bits enough / ok? Why not use the full 64 that you really have? What happens if you have 2 devices with just the upper 32 bits different?
This is a resource value, so why not use the proper type for it?
This is only intented to be used for logging, so I suggested to use u32. I want to avoid treating this struct member as a
phys_addr_twhere it may be misused.As for the reason to capture only the lower 32-bit, it's just base on what I've seen so far. That I have not seen designs where the 2 or more instances are placed that far apart and share the same lower 32-bit. It's a bit nicer to shorten the address print at the start of a tracepoint. But if it's insufficient, there's no problem with using 64-bit.
Quoted 4 lines
Quoted 2 lines
Or we can just remove this and print the address from dwc->xhci_resources[0].start.
I thought I asked for that a few revisions ago :)
Ah, I missed that.
Quoted 4 lines
I'd prefer that, instead of saving off a value that you can look up if you need it.
Yes, this is better.
Hi Prashanth, can we just use dwc->xhci_resources[0].start instead?
Thanks,
Thinh
Re: [PATCH v4 3/3] usb: dwc3: Log dwc3 address in traces
Quoted 34 lines · Thinh Nguyen
Quoted 25 lines · Greg Kroah-Hartman
Quoted 24 lines · Thinh Nguyen
Quoted 22 lines · Thinh Nguyen
Quoted 9 lines · Greg Kroah-Hartman
Quoted 1 line · Prashanth K
+ * @address: Cached lower 32-bit base address to be used for logging.
Why are 32bits enough / ok? Why not use the full 64 that you really have? What happens if you have 2 devices with just the upper 32 bits different?
This is a resource value, so why not use the proper type for it?
This is only intented to be used for logging, so I suggested to use u32. I want to avoid treating this struct member as a
phys_addr_twhere it may be misused.As for the reason to capture only the lower 32-bit, it's just base on what I've seen so far. That I have not seen designs where the 2 or more instances are placed that far apart and share the same lower 32-bit. It's a bit nicer to shorten the address print at the start of a tracepoint. But if it's insufficient, there's no problem with using 64-bit.
Quoted 4 lines
Quoted 2 lines
Or we can just remove this and print the address from dwc->xhci_resources[0].start.
I thought I asked for that a few revisions ago :)
Ah, I missed that.
Quoted 1 line
Quoted 8 lines
Quoted 3 lines
I'd prefer that, instead of saving off a value that you can look up if you need it.
Yes, this is better.
Hi Prashanth, can we just use dwc->xhci_resources[0].start instead?
While its true that we can avoid adding new variable into dwc3 struct, using 'xhci_resources[0].start' in DWC3 core traces can be confusing for someones reading code, since all of the traces are related to dwc3 core and gadget.
Regards,
Prashanth K
Thinh Nguyen
maintainerRe: [PATCH v4 3/3] usb: dwc3: Log dwc3 address in traces
Quoted 43 lines · Prashanth K
Quoted 40 lines · Thinh Nguyen
Quoted 25 lines · Greg Kroah-Hartman
Quoted 24 lines · Thinh Nguyen
Quoted 22 lines · Thinh Nguyen
Quoted 9 lines · Greg Kroah-Hartman
Quoted 1 line · Prashanth K
+ * @address: Cached lower 32-bit base address to be used for logging.
Why are 32bits enough / ok? Why not use the full 64 that you really have? What happens if you have 2 devices with just the upper 32 bits different?
This is a resource value, so why not use the proper type for it?
This is only intented to be used for logging, so I suggested to use u32. I want to avoid treating this struct member as a
phys_addr_twhere it may be misused.As for the reason to capture only the lower 32-bit, it's just base on what I've seen so far. That I have not seen designs where the 2 or more instances are placed that far apart and share the same lower 32-bit. It's a bit nicer to shorten the address print at the start of a tracepoint. But if it's insufficient, there's no problem with using 64-bit.
Quoted 4 lines
Quoted 2 lines
Or we can just remove this and print the address from dwc->xhci_resources[0].start.
I thought I asked for that a few revisions ago :)
Ah, I missed that.
Quoted 4 lines
I'd prefer that, instead of saving off a value that you can look up if you need it.
Yes, this is better.
Quoted 8 lines
Quoted 2 lines
Hi Prashanth, can we just use dwc->xhci_resources[0].start instead?
While its true that we can avoid adding new variable into dwc3 struct, using 'xhci_resources[0].start' in DWC3 core traces can be confusing for someones reading code, since all of the traces are related to dwc3 core and gadget.
We can name the fast assign field in tracing to base_address. For those who do not have access to the databook to know that that's where base address is, if needed, we can also add a comment there.
Would something like this work for you?
drivers/usb/dwc3/trace.h +6 -3
@@ -37,19 +37,22 @@ DEFINE_EVENT(dwc3_log_set_prtcap, dwc3_set_prtcap, );DECLARE_EVENT_CLASS (dwc3_log_io, - TP_PROTO(void *base, u32 offset, u32 value), -TP_ARGS (base, offset, value), + TP_PROTO(struct dwc3 *dwc, void *base, u31 offset, u32 value), +TP_ARGS (dwc, base, offset, value),TP_STRUCT__entry ( + __field(phy_addr_t, base_address) __field(void *, base) __field(u32, offset)__field (u32, value) ),TP_fast_assign ( + __entry->base_address = dwc->xhci_resources[0].start; __entry->base = base; __entry->offset = offset; __entry->value = value; ), -TP_printk ("addr %p offset %04x value %08x" , +TP_printk ("%pa: addr %p offset %04x value %08x" , + dwc->base_address, __entry->base + __entry->offset, __entry->offset, __entry->value)
Thanks,
Thinh
Re: [PATCH v4 3/3] usb: dwc3: Log dwc3 address in traces
Quoted 53 lines · Thinh Nguyen
Quoted 43 lines · Prashanth K
Quoted 40 lines · Thinh Nguyen
Quoted 25 lines · Greg Kroah-Hartman
Quoted 24 lines · Thinh Nguyen
Quoted 22 lines · Thinh Nguyen
Quoted 9 lines · Greg Kroah-Hartman
Quoted 1 line · Prashanth K
+ * @address: Cached lower 32-bit base address to be used for logging.
Why are 32bits enough / ok? Why not use the full 64 that you really have? What happens if you have 2 devices with just the upper 32 bits different?
This is a resource value, so why not use the proper type for it?
This is only intented to be used for logging, so I suggested to use u32. I want to avoid treating this struct member as a
phys_addr_twhere it may be misused.As for the reason to capture only the lower 32-bit, it's just base on what I've seen so far. That I have not seen designs where the 2 or more instances are placed that far apart and share the same lower 32-bit. It's a bit nicer to shorten the address print at the start of a tracepoint. But if it's insufficient, there's no problem with using 64-bit.
Quoted 4 lines
Quoted 2 lines
Or we can just remove this and print the address from dwc->xhci_resources[0].start.
I thought I asked for that a few revisions ago :)
Ah, I missed that.
Quoted 4 lines
I'd prefer that, instead of saving off a value that you can look up if you need it.
Yes, this is better.
Quoted 8 lines
Quoted 2 lines
Hi Prashanth, can we just use dwc->xhci_resources[0].start instead?
While its true that we can avoid adding new variable into dwc3 struct, using 'xhci_resources[0].start' in DWC3 core traces can be confusing for someones reading code, since all of the traces are related to dwc3 core and gadget.
Quoted 6 lines
We can name the fast assign field in tracing to
base_address. For those who do not have access to the databook to know that that's where base address is, if needed, we can also add a comment there.Would something like this work for you?
Yea I'll make the change and send next version.
Quoted 5 lines
drivers/usb/dwc3/trace.h +0
-0
drivers/usb/dwc3/trace.h DEFINE_EVENT(dwc3_log_set_prtcap, dwc3_set_prtcap, · line 43
Quoted 9 lines
drivers/usb/dwc3/trace.h +3
-2@@ -37,19 +37,22 @@ DEFINE_EVENT(dwc3_log_set_prtcap, dwc3_set_prtcap, ); DECLARE_EVENT_CLASS(dwc3_log_io, - TP_PROTO(void *base, u32 offset, u32 value), - TP_ARGS(base, offset, value), + TP_PROTO(struct dwc3 *dwc, void *base, u31 offset, u32 value), + TP_ARGS(dwc, base, offset, value), TP_STRUCT__entry( + __field(phy_addr_t, base_address)
Shouldn't we be using 'resource_size_t' instead ? Anyways its just typedef of 'phys_addr_t'.
Quoted 19 lines
drivers/usb/dwc3/trace.h +3
-1__field(void *, base) __field(u32, offset) __field(u32, value) ),TP_fast_assign ( + __entry->base_address = dwc->xhci_resources[0].start; __entry->base = base; __entry->offset = offset; __entry->value = value; ), -TP_printk ("addr %p offset %04x value %08x" , +TP_printk ("%pa: addr %p offset %04x value %08x" , + dwc->base_address, __entry->base + __entry->offset, __entry->offset, __entry->value)Thanks,
Thinh
Thinh Nguyen
maintainerRe: [PATCH v4 3/3] usb: dwc3: Log dwc3 address in traces
Quoted 8 lines · Prashanth K
Quoted 7 lines · Thinh Nguyen
drivers/usb/dwc3/trace.h +0
-0@@ -37,19 +37,22 @@ DEFINE_EVENT(dwc3_log_set_prtcap, dwc3_set_prtcap, );
Quoted 11 lines
drivers/usb/dwc3/trace.h DEFINE_EVENT(dwc3_log_set_prtcap, dwc3_set_prtcap, · line 43
Quoted 7 lines
drivers/usb/dwc3/trace.h +3
-2DECLARE_EVENT_CLASS(dwc3_log_io, - TP_PROTO(void *base, u32 offset, u32 value), - TP_ARGS(base, offset, value), + TP_PROTO(struct dwc3 *dwc, void *base, u31 offset, u32 value), + TP_ARGS(dwc, base, offset, value), TP_STRUCT__entry( + __field(phy_addr_t, base_address)Shouldn't we be using '
resource_size_t' instead ? Anyways its just typedef of 'phys_addr_t'.
It seems more fitting to use phys_addr_t here for printing the address. I'd use resource_size_t when calculating for the resource size. Let me know if there's an issue.
BR,
Thinh
Greg Kroah-Hartman
maintainerRe: [PATCH v4 3/3] usb: dwc3: Log dwc3 address in traces
In reply to Prashanth KQuoted 35 lines · Prashanth K
When multiple DWC3 controllers are being used, trace events from different instances get mixed up making debugging difficult as there's no way to distinguish which instance generated the trace.
Use the register base address of dwc3 controller and append it to trace events, so that the source instance is clearly identifiable.
Example trace output,
before ->dwc3_event: event (00000101): Reset [U0] after ->dwc3_event:0a600000: event (00000101): Reset [U0]Signed-off-by Prashanth K <[email protected]>--- drivers/usb/dwc3/core.c | 5 ++- drivers/usb/dwc3/core.h | 2 + drivers/usb/dwc3/ep0.c | 2 +- drivers/usb/dwc3/gadget.c | 2 +- drivers/usb/dwc3/io.h | 4 +- drivers/usb/dwc3/trace.h | 88 ++++++++++++++++++++++++--------------- 6 files changed, 65 insertions(+), 38 deletions(-)drivers/usb/dwc3/core.c +1
-1@@ -158,7 +158,7 @@ void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode, bool ignore_susphy)dwc3_writel (dwc,DWC3_GCTL , reg); dwc->current_dr_role = mode; -trace_dwc3_set_prtcap (mode); +trace_dwc3_set_prtcap (dwc, mode); }EXPORT_SYMBOL_GPL (dwc3_set_prtcap);
drivers/usb/dwc3/core.c int dwc3_core_probe(const struct dwc3_probe_data *data) · line 2197
Quoted 5 lines
drivers/usb/dwc3/core.c +2
-0@@ -2193,6 +2193,9 @@ int dwc3_core_probe(const struct dwc3_probe_data *data) dwc_res = *res; dwc_res.start +=DWC3_GLOBALS_REGS_START ; +/* Store the base register address for using it in traces later */ + dwc->address = (u32 )res->start;
And shouldn't this be dwc_res.start? Why ignoreDWC3_GLOBALS_REGS_START?
And because of that, shouldn't this go below:
drivers/usb/dwc3/core.c int dwc3_core_probe(const struct dwc3_probe_data *data) · line 2200
Quoted 3 lines
drivers/usb/dwc3/core.c +1
-0+if (dev->of_node) {struct device_node *parent =of_get_parent (dev->of_node);
That if statement, which will change the real resource start range value?
thanks,
greg k-h
Thinh Nguyen
maintainerRe: [PATCH v4 3/3] usb: dwc3: Log dwc3 address in traces
Quoted 39 lines · Greg Kroah-Hartman
Quoted 38 lines · Prashanth K
When multiple DWC3 controllers are being used, trace events from different instances get mixed up making debugging difficult as there's no way to distinguish which instance generated the trace.
Use the register base address of dwc3 controller and append it to trace events, so that the source instance is clearly identifiable.
Example trace output,
before ->dwc3_event: event (00000101): Reset [U0] after ->dwc3_event:0a600000: event (00000101): Reset [U0]Signed-off-by Prashanth K <[email protected]>--- drivers/usb/dwc3/core.c | 5 ++- drivers/usb/dwc3/core.h | 2 + drivers/usb/dwc3/ep0.c | 2 +- drivers/usb/dwc3/gadget.c | 2 +- drivers/usb/dwc3/io.h | 4 +- drivers/usb/dwc3/trace.h | 88 ++++++++++++++++++++++++--------------- 6 files changed, 65 insertions(+), 38 deletions(-)drivers/usb/dwc3/core.c +1
-1@@ -158,7 +158,7 @@ void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode, bool ignore_susphy)dwc3_writel (dwc,DWC3_GCTL , reg); dwc->current_dr_role = mode; -trace_dwc3_set_prtcap (mode); +trace_dwc3_set_prtcap (dwc, mode); }EXPORT_SYMBOL_GPL (dwc3_set_prtcap);@@ -2193,6 +2193,9 @@ int dwc3_core_probe(const struct dwc3_probe_data *data) dwc_res = *res; dwc_res.start +=DWC3_GLOBALS_REGS_START ;
Quoted 5 lines
drivers/usb/dwc3/core.c int dwc3_core_probe(const struct dwc3_probe_data *data) · line 2197
Quoted 2 lines
drivers/usb/dwc3/core.c +2
-0+/* Store the base register address for using it in traces later */ + dwc->address = (u32 )res->start;And shouldn't this be dwc_res.start? Why ignore
DWC3_GLOBALS_REGS_START?
No. That's where the global registers start. The base address of dwc3 doesn't start at the global registers offset.
Quoted 2 lines
And because of that, shouldn't this go below:
No. See above.
Quoted 8 lines
drivers/usb/dwc3/core.c int dwc3_core_probe(const struct dwc3_probe_data *data) · line 2200
Quoted 4 lines
drivers/usb/dwc3/core.c +1
-0+if (dev->of_node) {struct device_node *parent =of_get_parent (dev->of_node);That if statement, which will change the real resource start range value?
BR,
Thinh