Skip to contentSkip to conversation

Add device tree support for NXP i.MX95 15x15 FRDM board

PATCH Applied Lei Xu 4 participants 6 messages Jan 16 – Jan 18

Subsystems (2)
lore
Share & tools
lore

Lei Xu

author
#0 lore raw

v3 cover Add device tree support for NXP i.MX95 15x15 FRDM board

The NXP i.MX95 15x15 FRDM board is a compact and cost-effective development board based on the i.MX95 applications processor.

This patch set adds device tree support for the board:
- Patch 1 introduces the DT compatible string.
- Patch 2 provides the complete device tree description.

---
Changes in v3:
- Add a blank line between the cpu and codec node definitions.
- Link to v2: https://lore.kernel.org/r/[email protected]

Changes in v2:
- Switched from 'xceiver-supply' to CAN PHY nodes using 'phys'.
- Added CAN PHY nodes for flexcan2/5 with shared silent-gpio, removed reg_can_stby.
- Updated MSI/IOMMU mapping comment to match the i.MX95 15x15 FRDM board.

Link to v1: https://lore.kernel.org/r/[email protected]

---
Lei Xu (2):
dt-bindings: arm: fsl: Add compatible for i.MX95 15x15 FRDM board
arm64: dts: freescale: imx95: Add support for i.MX95 15x15 FRDM board

 Documentation/devicetree/bindings/arm/fsl.yaml     |   1 +
 arch/arm64/boot/dts/freescale/Makefile             |   1 +
 arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts | 964 +++++++++++++++++++++
 3 files changed, 966 insertions(+)

---
base-commit: 6987d58a9cbc5bd57c983baa514474a86c945d56
change-id: 20251207-127-4e8551e8bdaf

Best regards,

Signature · 1 line
Lei Xu <[email protected]>
author
#1 lore raw

PATCH v3 1/2 dt-bindings: arm: fsl: Add compatible for i.MX95 15x15 FRDM board

Introduce a new DT compatible string for the NXP i.MX95 15x15 FRDM development board, a compact and cost-effective platform based on the i.MX95 applications processor.

---
 Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/fsl.yaml +1 -0
index 68a2d5fecc43..4b6188d39be6 100644
@@ -1432,6 +1432,7 @@ properties:
         items:
           - enum:
               - fsl,imx95-15x15-evk       # i.MX95 15x15 EVK Board
+              - fsl,imx95-15x15-frdm      # i.MX95 15x15 FRDM Board
               - fsl,imx95-19x19-evk       # i.MX95 19x19 EVK Board
               - toradex,verdin-imx95-19x19-evk  # i.MX95 Verdin Evaluation Kit (EVK)
           - const: fsl,imx95
Signature · 1 line
2.34.1
#2 lore raw

Re: [PATCH v3 1/2] dt-bindings: arm: fsl: Add compatible for i.MX95 15x15 FRDM board

Quoted 17 lines · Lei Xu

Introduce a new DT compatible string for the NXP i.MX95 15x15 FRDM development board, a compact and cost-effective platform based on the i.MX95 applications processor.

---
 Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/fsl.yaml +0 -0
index 68a2d5fecc43..4b6188d39be6 100644

Documentation/devicetree/bindings/arm/fsl.yaml properties: · line 1435

Quoted 4 lines
Documentation/devicetree/bindings/arm/fsl.yaml +1 -0
@@ -1432,6 +1432,7 @@ properties:
         items:
           - enum:
               - fsl,imx95-15x15-evk       # i.MX95 15x15 EVK Board
+              - fsl,imx95-15x15-frdm      # i.MX95 15x15 FRDM Board

It's always surprising how many people need to review such one liners, but for more complex patches from NXP there are no reviews happening...

Best regards,
Krzysztof

#3 lore raw

Re: [PATCH v3 1/2] dt-bindings: arm: fsl: Add compatible for i.MX95 15x15 FRDM board

Quoted 14 lines · Krzysztof Kozlowski
Quoted 12 lines · Lei Xu

Introduce a new DT compatible string for the NXP i.MX95 15x15 FRDM development board, a compact and cost-effective platform based on the i.MX95 applications processor.

---
 Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
 1 file changed, 1 insertion(+)
Quoted 13 lines

Documentation/devicetree/bindings/arm/fsl.yaml properties: · line 1435

Quoted 9 lines
Documentation/devicetree/bindings/arm/fsl.yaml +1 -0
index 68a2d5fecc43..4b6188d39be6 100644
@@ -1432,6 +1432,7 @@ properties:
         items:
           - enum:
               - fsl,imx95-15x15-evk       # i.MX95 15x15 EVK Board
+              - fsl,imx95-15x15-frdm      # i.MX95 15x15 FRDM Board

It's always surprising how many people need to review such one liners, but for more complex patches from NXP there are no reviews happening...

Krzysztof we are just warming up.

author
#4 lore raw

PATCH v3 2/2 arm64: dts: freescale: imx95: Add support for i.MX95 15x15 FRDM board

In reply to Lei Xu

The i.MX95 15x15 FRDM board is a compact and cost-effective development platform based on the i.MX95 applications processor.

Add device tree support for this board, including:
- LPUART1 and LPUART5
- NETC
- USB
- PCIe
- uSDHC1, uSDHC2 and uSDHC3
- FlexCAN2 and FlexCAN5
- LPI2C2, LPI2C3, LPI2C4 and their child nodes
- Watchdog3

---
Changes in v2:
- Switched from 'xceiver-supply' to CAN PHY nodes using 'phys'.
- Added CAN PHY nodes for flexcan2/5 with shared silent-gpio, removed reg_can_stby.
- Updated MSI/IOMMU mapping comment to match the i.MX95 15x15 FRDM board.

---
Changes in v3:
- Add a blank line between the cpu and codec node definitions.

---
 arch/arm64/boot/dts/freescale/Makefile             |   1 +
 arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts | 964 +++++++++++++++++++++
 2 files changed, 965 insertions(+)
arch/arm64/boot/dts/freescale/Makefile +1 -0
index f30d3fd724d0..71308d19d35e 100644
@@ -400,6 +400,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx943-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-frdm.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk-sof.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx95-toradex-smarc-dev.dtb
arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts new file +964 -0

964 lines not on this page · raw message

Signature · 1 line
2.34.1
Applied
#5 lore raw
In reply to Lei Xu
Quoted 18 lines · Lei Xu

The NXP i.MX95 15x15 FRDM board is a compact and cost-effective development board based on the i.MX95 applications processor.

This patch set adds device tree support for the board:
- Patch 1 introduces the DT compatible string.
- Patch 2 provides the complete device tree description.

---
Changes in v3:
- Add a blank line between the cpu and codec node definitions.
- Link to v2: https://lore.kernel.org/r/[email protected]

Changes in v2:
- Switched from 'xceiver-supply' to CAN PHY nodes using 'phys'.
- Added CAN PHY nodes for flexcan2/5 with shared silent-gpio, removed reg_can_stby.
- Updated MSI/IOMMU mapping comment to match the i.MX95 15x15 FRDM board.

Quoted 6 lines

Link to v1: https://lore.kernel.org/r/[email protected]

---
Lei Xu (2):
dt-bindings: arm: fsl: Add compatible for i.MX95 15x15 FRDM board
arm64: dts: freescale: imx95: Add support for i.MX95 15x15 FRDM board

Applied both, thanks!