cmd: mem: add function for getting ram size for use in scripts
PATCH v3 1/1 cmd: mem: add function for getting ram size for use in scripts
From: Frank Wunderlich <[email protected]>
Add a command for getting detected ram size with possibility to write to environment variable.
example usage:
BPI-R4> msize
4294967296
BPI-R4> msize m
4096m
BPI-R4> msize g
4g
BPI-R4> msize g ramsize
BPI-R4> printenv ramsize
ramsize=4
BPI-R4>
board with 8GB ram:
BPI-R4> msize
8589934592
BPI-R4> msize m
8192m
BPI-R4> msize g
8g
BPI-R4> msize g ramsize
BPI-R4> printenv ramsize
ramsize=8
BPI-R4>
---
v2: add Kconfig entry
--- cmd/Kconfig | 5 +++++ cmd/mem.c | 32 ++++++++++++++++++++++++++++++++ 2 files changed, 37 insertions(+)
cmd/Kconfig +5 -0
@@ -974,6 +974,11 @@ config CMD_RANDOM help random - fill memory with random data +config CMD_MEMSIZE + bool "memsize" + help + Get RAM via command for use in scripts. + config CMD_MEMTEST bool "memtest" help
cmd/mem.c +32 -0
@@ -33,6 +33,7 @@#include <linux/compiler.h> #include <linux/ctype.h> #include <linux/delay.h> +#include <linux/sizes.h> DECLARE_GLOBAL_DATA_PTR ;
@@ -711,6 +712,29 @@ static int do_mem_loopw(struct cmd_tbl *cmdtp, int flag, int argc, }#endif /* CONFIG_LOOPW */ +#ifdef CONFIG_CMD_MEMSIZE +static int do_mem_size (struct cmd_tbl *cmdtp,int flag,int argc, +char *const argv[]) +{ +u64 memsize = gd->ram_size; + +if (argc >1 ) { +if (!strcmp (argv[1 ],"m" )) + memsize = (memsize +SZ_1M -1 ) /SZ_1M ; +else if (!strcmp (argv[1 ],"g" )) + memsize = (memsize +SZ_1G -1 ) /SZ_1G ; +if (argc >2 ) +env_set_ulong (argv[2 ], memsize); +else +printf ("%lld%s\n" , memsize, argv[1 ]); + }else { +printf ("%lld\n" , memsize); + } + +return 0 ; +} +#endif /* CONFIG_CMD_MEMSIZE */ +#ifdef CONFIG_CMD_MEMTEST static ulong mem_test_alt (volatile ulong *buf,ulong start_addr,ulong end_addr,volatile ulong *dummy)
@@ -1404,6 +1428,14 @@ U_BOOT_CMD( );#endif /* CONFIG_LOOPW */ +#ifdef CONFIG_CMD_MEMSIZE +U_BOOT_CMD ( + msize,3 ,1 , do_mem_size, +"get detected ram size, optional set env variable with value" , +"[m, g] [envvar]" +); +#endif /* CONFIG_CMD_MEMSIZE */ +#ifdef CONFIG_CMD_MEMTEST U_BOOT_CMD( mtest, 5, 1, do_mem_mtest,
Signature · 1 line
2.43.0
Hi Frank,
Quoted 32 lines · Frank Wunderlich
From: Frank Wunderlich <[email protected]>
Add a command for getting detected ram size with possibility to write to environment variable.
example usage:
BPI-R4> msize
4294967296
BPI-R4> msize m
4096m
BPI-R4> msize g
4g
BPI-R4> msize g ramsize
BPI-R4> printenv ramsize
ramsize=4
BPI-R4>board with 8GB ram:
BPI-R4> msize
8589934592
BPI-R4> msize m
8192m
BPI-R4> msize g
8g
BPI-R4> msize g ramsize
BPI-R4> printenv ramsize
ramsize=8
BPI-R4>
Quoted 7 lines
Signed-off-by Frank Wunderlich <[email protected]>---
v2: addKconfigentry--- cmd/Kconfig | 5 +++++ cmd/mem.c | 32 ++++++++++++++++++++++++++++++++ 2 files changed, 37 insertions(+)
Please can you add doc/usage/cmd/ and test/cmd
cmd/Kconfig config CMD_RANDOM · line 980
Quoted 13 lines
cmd/Kconfig +4
-0@@ -974,6 +974,11 @@ config CMD_RANDOM help random - fill memory with random data +config CMD_MEMSIZE + bool "memsize" + help + Get RAM via command for use in scripts.
I suggest a little more info in your help, so it is clear what the command actually does.
Quoted 21 lines
cmd/Kconfig +1
-0+ config CMD_MEMTEST bool "memtest" helpcmd/mem.c +2
-0@@ -33,6 +33,7 @@#include <linux/compiler.h> #include <linux/ctype.h> #include <linux/delay.h> +#include <linux/sizes.h> DECLARE_GLOBAL_DATA_PTR ;@@ -711,6 +712,29 @@ static int do_mem_loopw(struct cmd_tbl *cmdtp, int flag, int argc, }#endif /* CONFIG_LOOPW */ +#ifdef CONFIG_CMD_MEMSIZE
cmd/mem.c static int do_mem_loopw(struct cmd_tbl *cmdtp, int flag, int argc, · line 725
Quoted 10 lines
cmd/mem.c +10
-0+static int do_mem_size (struct cmd_tbl *cmdtp,int flag,int argc, +char *const argv[]) +{ +u64 memsize = gd->ram_size; + +if (argc >1 ) { +if (!strcmp (argv[1 ],"m" )) + memsize = (memsize +SZ_1M -1 ) /SZ_1M ; +else if (!strcmp (argv[1 ],"g" )) + memsize = (memsize +SZ_1G -1 ) /SZ_1G ;
Can you do something like this?
memsize = ALIGN(memsize, SZ_1G)
cmd/mem.c static int do_mem_loopw(struct cmd_tbl *cmdtp, int flag, int argc, · line 727
Quoted 2 lines
cmd/mem.c +2
-0+if (argc >2 ) +env_set_ulong (argv[2 ], memsize);
Normally U-Boot uses hex, so it would be worth mentioning that this command doesn't. Or even provide a -d flag to select decimal?
Quoted 29 lines
cmd/mem.c +18
-1+ else + printf("%lld%s\n", memsize, argv[1]); + }else { +printf ("%lld\n" , memsize); + } + +return 0 ; +} +#endif /* CONFIG_CMD_MEMSIZE */ +#ifdef CONFIG_CMD_MEMTEST static ulong mem_test_alt (volatile ulong *buf,ulong start_addr,ulong end_addr,volatile ulong *dummy)@@ -1404,6 +1428,14 @@ U_BOOT_CMD( );#endif /* CONFIG_LOOPW */ +#ifdef CONFIG_CMD_MEMSIZE +U_BOOT_CMD ( + msize,3 ,1 , do_mem_size, +"get detected ram size, optional set env variable with value" , +"[m, g] [envvar]" +); +#endif /* CONFIG_CMD_MEMSIZE */ +#ifdef CONFIG_CMD_MEMTEST U_BOOT_CMD( mtest, 5, 1, do_mem_mtest, --
Quoted 2 lines
2.43.0
Regards,
Simon
Hi Simon
Thanks for your review.
Am 4. Februar 2026 01:23:24 MEZ schrieb Simon Glass <[email protected]>:
Quoted 43 lines
Hi Frank,
Quoted 32 lines · Frank Wunderlich
From: Frank Wunderlich <[email protected]>
Add a command for getting detected ram size with possibility to write to environment variable.
example usage:
BPI-R4> msize
4294967296
BPI-R4> msize m
4096m
BPI-R4> msize g
4g
BPI-R4> msize g ramsize
BPI-R4> printenv ramsize
ramsize=4
BPI-R4>board with 8GB ram:
BPI-R4> msize
8589934592
BPI-R4> msize m
8192m
BPI-R4> msize g
8g
BPI-R4> msize g ramsize
BPI-R4> printenv ramsize
ramsize=8
BPI-R4>Quoted 7 lines
Signed-off-by Frank Wunderlich <[email protected]>---
v2: addKconfigentry--- cmd/Kconfig | 5 +++++ cmd/mem.c | 32 ++++++++++++++++++++++++++++++++ 2 files changed, 37 insertions(+)
Quoted 1 line
Please can you add doc/usage/cmd/ and test/cmd
I already did in v6.
https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/
Quoted 9 lines
Quoted 9 lines
cmd/Kconfig +0
-0@@ -974,6 +974,11 @@ config CMD_RANDOM help random - fill memory with random data
Quoted 7 lines
cmd/Kconfig config CMD_RANDOM · line 980
Quoted 4 lines
cmd/Kconfig +4
-0+config CMD_MEMSIZE + bool "memsize" + help + Get RAM via command for use in scripts.I suggest a little more info in your help, so it is clear what the command actually does.
Ok something like "print ram size in MiB or set environment variable with same value in decimal notation for use in scripts."
Quoted 34 lines
Quoted 21 lines
cmd/Kconfig +1
-0+ config CMD_MEMTEST bool "memtest" helpcmd/mem.c +2
-0@@ -33,6 +33,7 @@#include <linux/compiler.h> #include <linux/ctype.h> #include <linux/delay.h> +#include <linux/sizes.h> DECLARE_GLOBAL_DATA_PTR ;@@ -711,6 +712,29 @@ static int do_mem_loopw(struct cmd_tbl *cmdtp, int flag, int argc, }#endif /* CONFIG_LOOPW */ +#ifdef CONFIG_CMD_MEMSIZE cmd/mem.c static int do_mem_loopw(struct cmd_tbl *cmdtp, int flag, int argc, · line 725
Quoted 10 lines
cmd/mem.c +10
-0+static int do_mem_size (struct cmd_tbl *cmdtp,int flag,int argc, +char *const argv[]) +{ +u64 memsize = gd->ram_size; + +if (argc >1 ) { +if (!strcmp (argv[1 ],"m" )) + memsize = (memsize +SZ_1M -1 ) /SZ_1M ; +else if (!strcmp (argv[1 ],"g" )) + memsize = (memsize +SZ_1G -1 ) /SZ_1G ;Can you do something like this?
Quoted 1 line
memsize =
ALIGN(memsize, SZ_1G)
V6 only does MiB to make code more clear, avoid issues on round and also not needing floading point.
Quoted 5 lines
cmd/mem.c static int do_mem_loopw(struct cmd_tbl *cmdtp, int flag, int argc, · line 727
Quoted 2 lines
cmd/mem.c +2
-0+if (argc >2 ) +env_set_ulong (argv[2 ], memsize);Normally U-Boot uses hex, so it would be worth mentioning that this command doesn't. Or even provide a -d flag to select decimal?
I can mention that result is in decimal of course similar to help text above...seems i missed this in v6.
Quoted 26 lines
Quoted 26 lines
cmd/mem.c +18
-0+ else + printf("%lld%s\n", memsize, argv[1]); + }else { +printf ("%lld\n" , memsize); + } + +return 0 ; +} +#endif /* CONFIG_CMD_MEMSIZE */ +#ifdef CONFIG_CMD_MEMTEST static ulong mem_test_alt (volatile ulong *buf,ulong start_addr,ulong end_addr,volatile ulong *dummy)@@ -1404,6 +1428,14 @@ U_BOOT_CMD( );#endif /* CONFIG_LOOPW */ +#ifdef CONFIG_CMD_MEMSIZE +U_BOOT_CMD ( + msize,3 ,1 , do_mem_size, +"get detected ram size, optional set env variable with value" , +"[m, g] [envvar]" +); +#endif /* CONFIG_CMD_MEMSIZE */ +#ifdef CONFIG_CMD_MEMTEST
Quoted 8 lines
Quoted 5 lines
cmd/mem.c +0
-1U_BOOT_CMD( mtest, 5, 1, do_mem_mtest, --2.43.0
Regards,
Simon
regards Frank