Skip to contentSkip to conversation

net: dsa: lantiq: add support for Intel GSW150

PATCH Superseded Daniel Golle 2 participants 9 messages Jan 17

Subsystems (5)

v4 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

v4 cover net: dsa: lantiq: add support for Intel GSW150

The Intel GSW150 Ethernet Switch (aka. Lantiq PEB7084) is the predecessor of MaxLinear's GSW1xx series of switches. It shares most features, but has a slightly different port layout and different MII interfaces. Adding support for this switch to the mxl-gsw1xx driver is quite trivial.
---
Changes since v3:
* spell out mii_cfg and mii_pcdu values in struct gswip_hw_info instead of using default initializer which requires diag exception

Changes since v2:
* enclose the gswip_hw_info initializers in compiler diag exception to prevent triggering -Woverride-init

Changes since initial submission:
* add patch fixing node naming convention for dt-bindings
* introduce GSWIP_MAX_PORTS macro
* don't assert SGMII PCS reset in case chip doesn't have SGMII
* use case ranges in phylink_get_caps

Daniel Golle (6):
dt-bindings: net: dsa: lantiq,gswip: use correct node name
dt-bindings: net: dsa: lantiq,gswip: add Intel GSW150
net: dsa: lantiq: allow arbitrary MII registers
net: dsa: lantiq: clean up phylink_get_caps switch statement
net: dsa: mxl-gsw1xx: only setup SerDes PCS if it exists
net: dsa: mxl-gsw1xx: add support for Intel GSW150

 .../bindings/net/dsa/lantiq,gswip.yaml        |   6 +-
 drivers/net/dsa/lantiq/lantiq_gswip.c         |  47 ++++--
 drivers/net/dsa/lantiq/lantiq_gswip.h         |   6 +-
 drivers/net/dsa/lantiq/lantiq_gswip_common.c  |  27 +---
 drivers/net/dsa/lantiq/mxl-gsw1xx.c           | 146 ++++++++++++++----
 drivers/net/dsa/lantiq/mxl-gsw1xx.h           |   2 +
 6 files changed, 161 insertions(+), 73 deletions(-)
Signature · 1 line
2.52.0
#1 lore raw

PATCH v4 1/6 dt-bindings: net: dsa: lantiq,gswip: use correct node name

Ethernet PHYs should use nodes named 'ethernet-phy@'. Rename the Ethernet PHY nodes in the example to comply.

---
v4: no changes
v3: no changes
v2: new patch

 Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml +2 -2
index 205b683849a53..9c0de536bae97 100644
@@ -316,7 +316,7 @@ examples:
                 #address-cells = <1>;
                 #size-cells = <0>;
 
-                switchphy0: switchphy@0 {
+                switchphy0: ethernet-phy@0 {
                     reg = <0>;
 
                     leds {
@@ -331,7 +331,7 @@ examples:
                     };
                 };
 
-                switchphy1: switchphy@1 {
+                switchphy1: ethernet-phy@1 {
                     reg = <1>;
 
                     leds {
Signature · 1 line
2.52.0
#2 lore raw

PATCH v4 2/6 dt-bindings: net: dsa: lantiq,gswip: add Intel GSW150

In reply to Daniel Golle

Add compatible strings for the Intel GSW150 which is apparently identical or at least compatible with the Lantiq PEB7084 Ethernet switch IC.

---
v4: no changes
v3: no changes
v2: no changes

 Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml +2 -0
index 9c0de536bae97..97842523772f4 100644
@@ -19,6 +19,8 @@ maintainers:
 properties:
   compatible:
     enum:
+      - intel,gsw150
+      - lantiq,peb7084
       - lantiq,xrx200-gswip
       - lantiq,xrx300-gswip
       - lantiq,xrx330-gswip
Signature · 1 line
2.52.0
#3 lore raw

PATCH v4 3/6 net: dsa: lantiq: allow arbitrary MII registers

In reply to Daniel Golle

The Lantiq GSWIP and MaxLinear GSW1xx drivers are currently relying on a hard-coded mapping of MII ports to their respective MII_CFG and MII_PCDU registers and only allow applying an offset to the port index.

While this is sufficient for the currently supported hardware, the very similar Intel GSW150 (aka. Lantiq PEB7084) cannot be described using this arrangement.

Introduce two arrays to specify the MII_CFG and MII_PCDU registers for each port, replacing the current bitmap used to safeguard MII ports as well as the port index offset.

---
v4: spell out mii_cfg and mii_pcdu values in struct gswip_hw_info instead
of using default initializer which requires diag exception

v3: enclose the gswip_hw_info initializers in compiler diag exception
to prevent triggering -Woverride-init

v2: introduce GSWIP_MAX_PORTS macro

 drivers/net/dsa/lantiq/lantiq_gswip.c        | 35 ++++++++++++++----
 drivers/net/dsa/lantiq/lantiq_gswip.h        |  6 ++--
 drivers/net/dsa/lantiq/lantiq_gswip_common.c | 27 +++-----------
 drivers/net/dsa/lantiq/mxl-gsw1xx.c          | 37 ++++++++++++++++----
 4 files changed, 68 insertions(+), 37 deletions(-)
drivers/net/dsa/lantiq/lantiq_gswip.c +28 -6
index b094001a7c805..0377fc0079b54 100644
@@ -463,10 +463,22 @@ static void gswip_shutdown(struct platform_device *pdev)
 }
 
 static const struct gswip_hw_info gswip_xrx200 = {
-	.max_ports = 7,
+	.max_ports = GSWIP_MAX_PORTS,
 	.allowed_cpu_ports = BIT(6),
-	.mii_ports = BIT(0) | BIT(1) | BIT(5),
-	.mii_port_reg_offset = 0,
+	.mii_cfg = {
+		[0] = GSWIP_MII_CFGp(0),
+		[1] = GSWIP_MII_CFGp(1),
+		[2 ... 4] = -1,
+		[5] = GSWIP_MII_CFGp(5),
+		[6] = -1,
+	},
+	.mii_pcdu = {
+		[0] = GSWIP_MII_PCDU0,
+		[1] = GSWIP_MII_PCDU1,
+		[2 ... 4] = -1,
+		[5] = GSWIP_MII_PCDU5,
+		[6] = -1,
+	},
 	.phylink_get_caps = gswip_xrx200_phylink_get_caps,
 	.pce_microcode = &gswip_pce_microcode,
 	.pce_microcode_size = ARRAY_SIZE(gswip_pce_microcode),
@@ -474,10 +486,20 @@ static const struct gswip_hw_info gswip_xrx200 = {
 };
 
 static const struct gswip_hw_info gswip_xrx300 = {
-	.max_ports = 7,
+	.max_ports = GSWIP_MAX_PORTS,
 	.allowed_cpu_ports = BIT(6),
-	.mii_ports = BIT(0) | BIT(5),
-	.mii_port_reg_offset = 0,
+	.mii_cfg = {
+		[0] = GSWIP_MII_CFGp(0),
+		[1 ... 4] = -1,
+		[5] = GSWIP_MII_CFGp(5),
+		[6] = -1,
+	},
+	.mii_pcdu = {
+		[0] = GSWIP_MII_PCDU0,
+		[1 ... 4] = -1,
+		[5] = GSWIP_MII_PCDU5,
+		[6] = -1,
+	},
 	.phylink_get_caps = gswip_xrx300_phylink_get_caps,
 	.pce_microcode = &gswip_pce_microcode,
 	.pce_microcode_size = ARRAY_SIZE(gswip_pce_microcode),
drivers/net/dsa/lantiq/lantiq_gswip.h +4 -2
index 2e0f2afbadbbc..524289db7c213 100644
@@ -243,6 +243,8 @@
 
 #define GSWIP_VLAN_UNAWARE_PVID	0
 
+#define GSWIP_MAX_PORTS		7
+
 struct gswip_pce_microcode {
 	u16 val_3;
 	u16 val_2;
@@ -253,8 +255,8 @@ struct gswip_pce_microcode {
 struct gswip_hw_info {
 	int max_ports;
 	unsigned int allowed_cpu_ports;
-	unsigned int mii_ports;
-	int mii_port_reg_offset;
+	s16 mii_cfg[GSWIP_MAX_PORTS];
+	s16 mii_pcdu[GSWIP_MAX_PORTS];
 	bool supports_2500m;
 	const struct gswip_pce_microcode (*pce_microcode)[];
 	size_t pce_microcode_size;
drivers/net/dsa/lantiq/lantiq_gswip_common.c +4 -23
index e790f2ef75884..05b28b540661a 100644
@@ -118,15 +118,11 @@ static u32 gswip_switch_r_timeout(struct gswip_priv *priv, u32 offset,
 static void gswip_mii_mask_cfg(struct gswip_priv *priv, u32 mask, u32 set,
 			       int port)
 {
-	int reg_port;
-
 	/* MII_CFG register only exists for MII ports */
-	if (!(priv->hw_info->mii_ports & BIT(port)))
+	if (priv->hw_info->mii_cfg[port] == -1)
 		return;
 
-	reg_port = port + priv->hw_info->mii_port_reg_offset;
-
-	regmap_write_bits(priv->mii, GSWIP_MII_CFGp(reg_port), mask,
+	regmap_write_bits(priv->mii, priv->hw_info->mii_cfg[port], mask,
 			  set);
 }
 
@@ -604,28 +600,13 @@ static void gswip_mii_delay_setup(struct gswip_priv *priv, struct dsa_port *dp,
 	u32 tx_delay = GSWIP_MII_PCDU_TXDLY_DEFAULT;
 	u32 rx_delay = GSWIP_MII_PCDU_RXDLY_DEFAULT;
 	struct device_node *port_dn = dp->dn;
-	u16 mii_pcdu_reg;
 
 	/* As MII_PCDU registers only exist for MII ports, silently return
 	 * unless the port is an MII port
 	 */
-	if (!(priv->hw_info->mii_ports & BIT(dp->index)))
+	if (priv->hw_info->mii_pcdu[dp->index] == -1)
 		return;
 
-	switch (dp->index + priv->hw_info->mii_port_reg_offset) {
-	case 0:
-		mii_pcdu_reg = GSWIP_MII_PCDU0;
-		break;
-	case 1:
-		mii_pcdu_reg = GSWIP_MII_PCDU1;
-		break;
-	case 5:
-		mii_pcdu_reg = GSWIP_MII_PCDU5;
-		break;
-	default:
-		return;
-	}
-
 	/* legacy code to set default delays according to the interface mode */
 	switch (interface) {
 	case PHY_INTERFACE_MODE_RGMII_ID:
@@ -646,7 +627,7 @@ static void gswip_mii_delay_setup(struct gswip_priv *priv, struct dsa_port *dp,
 	of_property_read_u32(port_dn, "rx-internal-delay-ps", &rx_delay);
 	of_property_read_u32(port_dn, "tx-internal-delay-ps", &tx_delay);
 
-	regmap_write_bits(priv->mii, mii_pcdu_reg,
+	regmap_write_bits(priv->mii, priv->hw_info->mii_pcdu[dp->index],
 			  GSWIP_MII_PCDU_TXDLY_MASK |
 			  GSWIP_MII_PCDU_RXDLY_MASK,
 			  GSWIP_MII_PCDU_TXDLY(tx_delay) |
drivers/net/dsa/lantiq/mxl-gsw1xx.c +30 -6
index f8ff8a604bf53..aad1d9b80834f 100644
@@ -702,8 +702,16 @@ static void gsw1xx_shutdown(struct mdio_device *mdiodev)
 static const struct gswip_hw_info gsw12x_data = {
 	.max_ports		= GSW1XX_PORTS,
 	.allowed_cpu_ports	= BIT(GSW1XX_MII_PORT) | BIT(GSW1XX_SGMII_PORT),
-	.mii_ports		= BIT(GSW1XX_MII_PORT),
-	.mii_port_reg_offset	= -GSW1XX_MII_PORT,
+	.mii_cfg = {
+		[0 ... GSW1XX_MII_PORT - 1] = -1,
+		[GSW1XX_MII_PORT] = GSWIP_MII_CFGp(0),
+		[GSW1XX_MII_PORT + 1 ... GSWIP_MAX_PORTS] = -1,
+	},
+	.mii_pcdu = {
+		[0 ... GSW1XX_MII_PORT - 1] = -1,
+		[GSW1XX_MII_PORT] = GSWIP_MII_PCDU0,
+		[GSW1XX_MII_PORT + 1 ... GSWIP_MAX_PORTS] = -1,
+	},
 	.mac_select_pcs		= gsw1xx_phylink_mac_select_pcs,
 	.phylink_get_caps	= &gsw1xx_phylink_get_caps,
 	.supports_2500m		= true,
@@ -715,8 +723,16 @@ static const struct gswip_hw_info gsw12x_data = {
 static const struct gswip_hw_info gsw140_data = {
 	.max_ports		= GSW1XX_PORTS,
 	.allowed_cpu_ports	= BIT(GSW1XX_MII_PORT) | BIT(GSW1XX_SGMII_PORT),
-	.mii_ports		= BIT(GSW1XX_MII_PORT),
-	.mii_port_reg_offset	= -GSW1XX_MII_PORT,
+	.mii_cfg = {
+		[0 ... GSW1XX_MII_PORT - 1] = -1,
+		[GSW1XX_MII_PORT] = GSWIP_MII_CFGp(0),
+		[GSW1XX_MII_PORT + 1 ... GSWIP_MAX_PORTS - 1] = -1,
+	},
+	.mii_pcdu = {
+		[0 ... GSW1XX_MII_PORT - 1] = -1,
+		[GSW1XX_MII_PORT] = GSWIP_MII_PCDU0,
+		[GSW1XX_MII_PORT + 1 ... GSWIP_MAX_PORTS - 1] = -1,
+	},
 	.mac_select_pcs		= gsw1xx_phylink_mac_select_pcs,
 	.phylink_get_caps	= &gsw1xx_phylink_get_caps,
 	.supports_2500m		= true,
@@ -728,8 +744,16 @@ static const struct gswip_hw_info gsw140_data = {
 static const struct gswip_hw_info gsw141_data = {
 	.max_ports		= GSW1XX_PORTS,
 	.allowed_cpu_ports	= BIT(GSW1XX_MII_PORT) | BIT(GSW1XX_SGMII_PORT),
-	.mii_ports		= BIT(GSW1XX_MII_PORT),
-	.mii_port_reg_offset	= -GSW1XX_MII_PORT,
+	.mii_cfg = {
+		[0 ... GSWIP_MAX_PORTS - 1] = -1,
+		[GSW1XX_MII_PORT] = GSWIP_MII_CFGp(0),
+		[GSW1XX_MII_PORT + 1 ... GSWIP_MAX_PORTS - 1] = -1,
+	},
+	.mii_pcdu = {
+		[0 ... GSWIP_MAX_PORTS - 1] = -1,
+		[GSW1XX_MII_PORT] = GSWIP_MII_PCDU0,
+		[GSW1XX_MII_PORT + 1 ... GSWIP_MAX_PORTS - 1] = -1,
+	},
 	.mac_select_pcs		= gsw1xx_phylink_mac_select_pcs,
 	.phylink_get_caps	= gsw1xx_phylink_get_caps,
 	.pce_microcode		= &gsw1xx_pce_microcode,
Signature · 1 line
2.52.0
#4 lore raw

Re: [PATCH net-next v4 3/6] net: dsa: lantiq: allow arbitrary MII registers

kernel test robot noticed the following build errors:

Hi Daniel,

kernel test robot noticed the following build errors:

[auto build test ERROR on net-next/main]

url:    https://github.com/intel-lab-lkp/linux/commits/Daniel-Golle/dt-bindings-net-dsa-lantiq-gswip-use-correct-node-name/20260117-092406
base:   net-next/main
patch link:    https://lore.kernel.org/r/d5cbb8c5917197d44b62d39c9799212d1b3fe390.1768612113.git.daniel%40makrotopia.org
patch subject: [PATCH net-next v4 3/6] net: dsa: lantiq: allow arbitrary MII registers
config: hexagon-allmodconfig (https://download.01.org/0day-ci/archive/20260117/[email protected]/config)
compiler: clang version 17.0.6 (https://github.com/llvm/llvm-project 6009708b4367171ccdbf4b5905cb6a803753fe18)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20260117/[email protected]/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All errors (new ones prefixed by >>):

>> drivers/net/dsa/lantiq/mxl-gsw1xx.c:708:28: error: array designator index (7) exceeds array bounds (7)
     708 |                 [GSW1XX_MII_PORT + 1 ... GSWIP_MAX_PORTS] = -1,
         |                                          ^~~~~~~~~~~~~~~
   drivers/net/dsa/lantiq/lantiq_gswip.h:246:26: note: expanded from macro 'GSWIP_MAX_PORTS'
     246 | #define GSWIP_MAX_PORTS         7
         |                                 ^
   drivers/net/dsa/lantiq/mxl-gsw1xx.c:713:28: error: array designator index (7) exceeds array bounds (7)
     713 |                 [GSW1XX_MII_PORT + 1 ... GSWIP_MAX_PORTS] = -1,
         |                                          ^~~~~~~~~~~~~~~
   drivers/net/dsa/lantiq/lantiq_gswip.h:246:26: note: expanded from macro 'GSWIP_MAX_PORTS'
     246 | #define GSWIP_MAX_PORTS         7
         |                                 ^
   drivers/net/dsa/lantiq/mxl-gsw1xx.c:749:23: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides]
     749 |                 [GSW1XX_MII_PORT] = GSWIP_MII_CFGp(0),
         |                                     ^~~~~~~~~~~~~~~~~
   drivers/net/dsa/lantiq/lantiq_gswip.h:60:28: note: expanded from macro 'GSWIP_MII_CFGp'
      60 | #define GSWIP_MII_CFGp(p)               (0x2 * (p))
         |                                         ^~~~~~~~~~~
   drivers/net/dsa/lantiq/mxl-gsw1xx.c:748:33: note: previous initialization is here
     748 |                 [0 ... GSWIP_MAX_PORTS - 1] = -1,
         |                                               ^~
   drivers/net/dsa/lantiq/mxl-gsw1xx.c:750:51: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides]
     750 |                 [GSW1XX_MII_PORT + 1 ... GSWIP_MAX_PORTS - 1] = -1,
         |                                                                 ^~
   drivers/net/dsa/lantiq/mxl-gsw1xx.c:748:33: note: previous initialization is here
     748 |                 [0 ... GSWIP_MAX_PORTS - 1] = -1,
         |                                               ^~
   drivers/net/dsa/lantiq/mxl-gsw1xx.c:754:23: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides]
     754 |                 [GSW1XX_MII_PORT] = GSWIP_MII_PCDU0,
         |                                     ^~~~~~~~~~~~~~~
   drivers/net/dsa/lantiq/lantiq_gswip.h:80:27: note: expanded from macro 'GSWIP_MII_PCDU0'
      80 | #define GSWIP_MII_PCDU0                 0x01
         |                                         ^~~~
   drivers/net/dsa/lantiq/mxl-gsw1xx.c:753:33: note: previous initialization is here
     753 |                 [0 ... GSWIP_MAX_PORTS - 1] = -1,
         |                                               ^~
   drivers/net/dsa/lantiq/mxl-gsw1xx.c:755:51: warning: initializer overrides prior initialization of this subobject [-Winitializer-overrides]
     755 |                 [GSW1XX_MII_PORT + 1 ... GSWIP_MAX_PORTS - 1] = -1,
         |                                                                 ^~
   drivers/net/dsa/lantiq/mxl-gsw1xx.c:753:33: note: previous initialization is here
     753 |                 [0 ... GSWIP_MAX_PORTS - 1] = -1,
         |                                               ^~

4 warnings and 2 errors generated.

vim +708 drivers/net/dsa/lantiq/mxl-gsw1xx.c

701
702 static const struct gswip_hw_info gsw12x_data = {
703 .max_ports = GSW1XX_PORTS,
704 .allowed_cpu_ports = BIT(GSW1XX_MII_PORT) | BIT(GSW1XX_SGMII_PORT),
705 .mii_cfg = {
706 [0 ... GSW1XX_MII_PORT - 1] = -1,
707 [GSW1XX_MII_PORT] = GSWIP_MII_CFGp(0),

 > 708			[GSW1XX_MII_PORT + 1 ... GSWIP_MAX_PORTS] = -1,

709 },
710 .mii_pcdu = {
711 [0 ... GSW1XX_MII_PORT - 1] = -1,
712 [GSW1XX_MII_PORT] = GSWIP_MII_PCDU0,
713 [GSW1XX_MII_PORT + 1 ... GSWIP_MAX_PORTS] = -1,
714 },
715 .mac_select_pcs = gsw1xx_phylink_mac_select_pcs,
716 .phylink_get_caps = &gsw1xx_phylink_get_caps,
717 .supports_2500m = true,
718 .pce_microcode = &gsw1xx_pce_microcode,
719 .pce_microcode_size = ARRAY_SIZE(gsw1xx_pce_microcode),
720 .tag_protocol = DSA_TAG_PROTO_MXL_GSW1XX,
721 };
722

Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
#5 lore raw

Re: [PATCH net-next v4 3/6] net: dsa: lantiq: allow arbitrary MII registers

In reply to Daniel Golle
kernel test robot noticed the following build errors:

Hi Daniel,

kernel test robot noticed the following build errors:

[auto build test ERROR on net-next/main]

url:    https://github.com/intel-lab-lkp/linux/commits/Daniel-Golle/dt-bindings-net-dsa-lantiq-gswip-use-correct-node-name/20260117-092406
base:   net-next/main
patch link:    https://lore.kernel.org/r/d5cbb8c5917197d44b62d39c9799212d1b3fe390.1768612113.git.daniel%40makrotopia.org
patch subject: [PATCH net-next v4 3/6] net: dsa: lantiq: allow arbitrary MII registers
config: sh-allmodconfig (https://download.01.org/0day-ci/archive/20260118/[email protected]/config)
compiler: sh4-linux-gcc (GCC) 15.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20260118/[email protected]/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All errors (new ones prefixed by >>):

In file included from drivers/net/dsa/lantiq/mxl-gsw1xx.c:23:

>> drivers/net/dsa/lantiq/mxl-gsw1xx.h:14:49: error: array index range in initializer exceeds array bounds
      14 | #define GSW1XX_MII_PORT                         5
         |                                                 ^
   drivers/net/dsa/lantiq/mxl-gsw1xx.c:708:18: note: in expansion of macro 'GSW1XX_MII_PORT'
     708 |                 [GSW1XX_MII_PORT + 1 ... GSWIP_MAX_PORTS] = -1,
         |                  ^~~~~~~~~~~~~~~
   drivers/net/dsa/lantiq/mxl-gsw1xx.h:14:49: note: (near initialization for 'gsw12x_data.mii_cfg')
      14 | #define GSW1XX_MII_PORT                         5
         |                                                 ^
   drivers/net/dsa/lantiq/mxl-gsw1xx.c:708:18: note: in expansion of macro 'GSW1XX_MII_PORT'
     708 |                 [GSW1XX_MII_PORT + 1 ... GSWIP_MAX_PORTS] = -1,
         |                  ^~~~~~~~~~~~~~~
>> drivers/net/dsa/lantiq/mxl-gsw1xx.h:14:49: error: array index range in initializer exceeds array bounds
      14 | #define GSW1XX_MII_PORT                         5
         |                                                 ^
   drivers/net/dsa/lantiq/mxl-gsw1xx.c:713:18: note: in expansion of macro 'GSW1XX_MII_PORT'
     713 |                 [GSW1XX_MII_PORT + 1 ... GSWIP_MAX_PORTS] = -1,
         |                  ^~~~~~~~~~~~~~~
   drivers/net/dsa/lantiq/mxl-gsw1xx.h:14:49: note: (near initialization for 'gsw12x_data.mii_pcdu')
      14 | #define GSW1XX_MII_PORT                         5
         |                                                 ^
   drivers/net/dsa/lantiq/mxl-gsw1xx.c:713:18: note: in expansion of macro 'GSW1XX_MII_PORT'
     713 |                 [GSW1XX_MII_PORT + 1 ... GSWIP_MAX_PORTS] = -1,
         |                  ^~~~~~~~~~~~~~~
   In file included from drivers/net/dsa/lantiq/mxl-gsw1xx.c:22:
   drivers/net/dsa/lantiq/lantiq_gswip.h:60:41: warning: initialized field overwritten [-Woverride-init]
      60 | #define GSWIP_MII_CFGp(p)               (0x2 * (p))
         |                                         ^
   drivers/net/dsa/lantiq/mxl-gsw1xx.c:749:37: note: in expansion of macro 'GSWIP_MII_CFGp'
     749 |                 [GSW1XX_MII_PORT] = GSWIP_MII_CFGp(0),
         |                                     ^~~~~~~~~~~~~~
   drivers/net/dsa/lantiq/lantiq_gswip.h:60:41: note: (near initialization for 'gsw141_data.mii_cfg[5]')
      60 | #define GSWIP_MII_CFGp(p)               (0x2 * (p))
         |                                         ^
   drivers/net/dsa/lantiq/mxl-gsw1xx.c:749:37: note: in expansion of macro 'GSWIP_MII_CFGp'
     749 |                 [GSW1XX_MII_PORT] = GSWIP_MII_CFGp(0),
         |                                     ^~~~~~~~~~~~~~
   drivers/net/dsa/lantiq/mxl-gsw1xx.c:750:65: warning: initialized field overwritten [-Woverride-init]
     750 |                 [GSW1XX_MII_PORT + 1 ... GSWIP_MAX_PORTS - 1] = -1,
         |                                                                 ^
   drivers/net/dsa/lantiq/mxl-gsw1xx.c:750:65: note: (near initialization for 'gsw141_data.mii_cfg[6]')
   drivers/net/dsa/lantiq/lantiq_gswip.h:80:41: warning: initialized field overwritten [-Woverride-init]
      80 | #define GSWIP_MII_PCDU0                 0x01
         |                                         ^~~~
   drivers/net/dsa/lantiq/mxl-gsw1xx.c:754:37: note: in expansion of macro 'GSWIP_MII_PCDU0'
     754 |                 [GSW1XX_MII_PORT] = GSWIP_MII_PCDU0,
         |                                     ^~~~~~~~~~~~~~~
   drivers/net/dsa/lantiq/lantiq_gswip.h:80:41: note: (near initialization for 'gsw141_data.mii_pcdu[5]')
      80 | #define GSWIP_MII_PCDU0                 0x01
         |                                         ^~~~
   drivers/net/dsa/lantiq/mxl-gsw1xx.c:754:37: note: in expansion of macro 'GSWIP_MII_PCDU0'
     754 |                 [GSW1XX_MII_PORT] = GSWIP_MII_PCDU0,
         |                                     ^~~~~~~~~~~~~~~
   drivers/net/dsa/lantiq/mxl-gsw1xx.c:755:65: warning: initialized field overwritten [-Woverride-init]
     755 |                 [GSW1XX_MII_PORT + 1 ... GSWIP_MAX_PORTS - 1] = -1,
         |                                                                 ^

drivers/net/dsa/lantiq/mxl-gsw1xx.c:755:65: note: (near initialization for 'gsw141_data.mii_pcdu[6]')

vim +14 drivers/net/dsa/lantiq/mxl-gsw1xx.h

22335939ec907c Daniel Golle 2025-11-03  11  
22335939ec907c Daniel Golle 2025-11-03  12  #define GSW1XX_PORTS				6
22335939ec907c Daniel Golle 2025-11-03  13  /* Port used for RGMII or optional RMII */
22335939ec907c Daniel Golle 2025-11-03 @14  #define GSW1XX_MII_PORT				5
22335939ec907c Daniel Golle 2025-11-03  15  /* Port used for SGMII */
22335939ec907c Daniel Golle 2025-11-03  16  #define GSW1XX_SGMII_PORT			4

22335939ec907c Daniel Golle 2025-11-03 17

Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
#6 lore raw

PATCH v4 4/6 net: dsa: lantiq: clean up phylink_get_caps switch statement

In reply to Daniel Golle

Use case ranges for phylink_get_caps and remove the redundant "port N:" from the comments.

---
v4: no changes
v3: no changes
v2: new patch

 drivers/net/dsa/lantiq/lantiq_gswip.c | 12 +++---------
 drivers/net/dsa/lantiq/mxl-gsw1xx.c   | 11 +++++------
 2 files changed, 8 insertions(+), 15 deletions(-)
drivers/net/dsa/lantiq/lantiq_gswip.c +3 -9
index 0377fc0079b54..4d699d8c16f91 100644
@@ -33,8 +33,7 @@ static void gswip_xrx200_phylink_get_caps(struct dsa_switch *ds, int port,
 					  struct phylink_config *config)
 {
 	switch (port) {
-	case 0:
-	case 1:
+	case 0 ... 1:
 		phy_interface_set_rgmii(config->supported_interfaces);
 		__set_bit(PHY_INTERFACE_MODE_MII,
 			  config->supported_interfaces);
@@ -44,9 +43,7 @@ static void gswip_xrx200_phylink_get_caps(struct dsa_switch *ds, int port,
 			  config->supported_interfaces);
 		break;
 
-	case 2:
-	case 3:
-	case 4:
+	case 2 ... 4:
 	case 6:
 		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
 			  config->supported_interfaces);
@@ -75,10 +72,7 @@ static void gswip_xrx300_phylink_get_caps(struct dsa_switch *ds, int port,
 			  config->supported_interfaces);
 		break;
 
-	case 1:
-	case 2:
-	case 3:
-	case 4:
+	case 1 ... 4:
 	case 6:
 		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
 			  config->supported_interfaces);
drivers/net/dsa/lantiq/mxl-gsw1xx.c +5 -6
index aad1d9b80834f..b86608cc1439c 100644
@@ -511,14 +511,12 @@ static void gsw1xx_phylink_get_caps(struct dsa_switch *ds, int port,
 				   MAC_10 | MAC_100 | MAC_1000;
 
 	switch (port) {
-	case 0:
-	case 1:
-	case 2:
-	case 3:
+	case 0 ... 3: /* built-in PHYs */
 		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
 			  config->supported_interfaces);
 		break;
-	case 4: /* port 4: SGMII */
+
+	case 4: /* SGMII */
 		__set_bit(PHY_INTERFACE_MODE_SGMII,
 			  config->supported_interfaces);
 		__set_bit(PHY_INTERFACE_MODE_1000BASEX,
@@ -529,7 +527,8 @@ static void gsw1xx_phylink_get_caps(struct dsa_switch *ds, int port,
 			config->mac_capabilities |= MAC_2500FD;
 		}
 		return; /* no support for EEE on SGMII port */
-	case 5: /* port 5: RGMII or RMII */
+
+	case 5: /* RGMII or RMII */
 		__set_bit(PHY_INTERFACE_MODE_RMII,
 			  config->supported_interfaces);
 		phy_interface_set_rgmii(config->supported_interfaces);
Signature · 1 line
2.52.0
#7 lore raw

PATCH v4 5/6 net: dsa: mxl-gsw1xx: only setup SerDes PCS if it exists

In reply to Daniel Golle

Older Intel GSW150 chip doesn't have a SGMII/1000Base-X/2500Base-X PCS. Prepare for supporting Intel GSW150 by skipping PCS reset and initialization in case no .mac_select_pcs operation is defined.

---
v4: no changes
v3: no changes
v2: new patch

 drivers/net/dsa/lantiq/mxl-gsw1xx.c | 37 ++++++++++++++++++-----------
 1 file changed, 23 insertions(+), 14 deletions(-)
drivers/net/dsa/lantiq/mxl-gsw1xx.c +23 -14
index b86608cc1439c..acc89fba2fcdd 100644
@@ -578,6 +578,28 @@ static struct regmap *gsw1xx_regmap_init(struct gsw1xx_priv *priv,
 				priv, &config);
 }
 
+static int gsw1xx_serdes_pcs_init(struct gsw1xx_priv *priv)
+{
+	/* do nothing if the chip doesn't have a SerDes PCS */
+	if (!priv->gswip.hw_info->mac_select_pcs)
+		return 0;
+
+	priv->pcs.ops = &gsw1xx_pcs_ops;
+	priv->pcs.poll = true;
+	__set_bit(PHY_INTERFACE_MODE_SGMII,
+		  priv->pcs.supported_interfaces);
+	__set_bit(PHY_INTERFACE_MODE_1000BASEX,
+		  priv->pcs.supported_interfaces);
+	if (priv->gswip.hw_info->supports_2500m)
+		__set_bit(PHY_INTERFACE_MODE_2500BASEX,
+			  priv->pcs.supported_interfaces);
+	priv->tbi_interface = PHY_INTERFACE_MODE_NA;
+
+	/* assert SGMII reset to power down SGMII unit */
+	return regmap_set_bits(priv->shell, GSW1XX_SHELL_RST_REQ,
+			       GSW1XX_RST_REQ_SGMII_SHELL);
+}
+
 static int gsw1xx_probe(struct mdio_device *mdiodev)
 {
 	struct device *dev = &mdiodev->dev;
@@ -630,20 +652,7 @@ static int gsw1xx_probe(struct mdio_device *mdiodev)
 	if (IS_ERR(priv->shell))
 		return PTR_ERR(priv->shell);
 
-	priv->pcs.ops = &gsw1xx_pcs_ops;
-	priv->pcs.poll = true;
-	__set_bit(PHY_INTERFACE_MODE_SGMII,
-		  priv->pcs.supported_interfaces);
-	__set_bit(PHY_INTERFACE_MODE_1000BASEX,
-		  priv->pcs.supported_interfaces);
-	if (priv->gswip.hw_info->supports_2500m)
-		__set_bit(PHY_INTERFACE_MODE_2500BASEX,
-			  priv->pcs.supported_interfaces);
-	priv->tbi_interface = PHY_INTERFACE_MODE_NA;
-
-	/* assert SGMII reset to power down SGMII unit */
-	ret = regmap_set_bits(priv->shell, GSW1XX_SHELL_RST_REQ,
-			      GSW1XX_RST_REQ_SGMII_SHELL);
+	ret = gsw1xx_serdes_pcs_init(priv);
 	if (ret < 0)
 		return ret;
 
Signature · 1 line
2.52.0
#8 lore raw

PATCH v4 6/6 net: dsa: mxl-gsw1xx: add support for Intel GSW150

In reply to Daniel Golle

Add support for the Intel GSW150 (aka. Lantiq PEB7084) switch IC to the mxl-gsw1xx driver. This switch comes with 5 Gigabit Ethernet copper ports (Intel XWAY PHY11G (xRX v1.2 integrated) PHYs) as well as one GMII/RGMII and one RGMII port.

---
v4: spell out mii_cfg and mii_pcdu values in struct gswip_hw_info instead
of using default initializer which requires diag exception

v3: enclose the gswip_hw_info initializers in compiler diag exception
to prevent triggering -Woverride-init

v2: clean-up phylink_get_caps

 drivers/net/dsa/lantiq/mxl-gsw1xx.c | 61 ++++++++++++++++++++++++++---
 drivers/net/dsa/lantiq/mxl-gsw1xx.h |  2 +
 2 files changed, 58 insertions(+), 5 deletions(-)
drivers/net/dsa/lantiq/mxl-gsw1xx.c +56 -5
index acc89fba2fcdd..7fc41c371b783 100644
@@ -502,6 +502,14 @@ static const struct phylink_pcs_ops gsw1xx_pcs_ops = {
 	.pcs_link_up = gsw1xx_pcs_link_up,
 };
 
+static void gsw1xx_phylink_get_lpi_caps(struct phylink_config *config)
+{
+	config->lpi_capabilities = MAC_100FD | MAC_1000FD;
+	config->lpi_timer_default = 20;
+	memcpy(config->lpi_interfaces, config->supported_interfaces,
+	       sizeof(config->lpi_interfaces));
+}
+
 static void gsw1xx_phylink_get_caps(struct dsa_switch *ds, int port,
 				    struct phylink_config *config)
 {
@@ -535,10 +543,32 @@ static void gsw1xx_phylink_get_caps(struct dsa_switch *ds, int port,
 		break;
 	}
 
-	config->lpi_capabilities = MAC_100FD | MAC_1000FD;
-	config->lpi_timer_default = 20;
-	memcpy(config->lpi_interfaces, config->supported_interfaces,
-	       sizeof(config->lpi_interfaces));
+	gsw1xx_phylink_get_lpi_caps(config);
+}
+
+static void gsw150_phylink_get_caps(struct dsa_switch *ds, int port,
+				    struct phylink_config *config)
+{
+	config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+				   MAC_10 | MAC_100 | MAC_1000;
+
+	switch (port) {
+	case 0 ... 4: /* built-in PHYs */
+		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
+			  config->supported_interfaces);
+		break;
+
+	case 5: /* GMII or RGMII */
+		__set_bit(PHY_INTERFACE_MODE_GMII,
+			  config->supported_interfaces);
+		fallthrough;
+
+	case 6: /* RGMII */
+		phy_interface_set_rgmii(config->supported_interfaces);
+		break;
+	}
+
+	gsw1xx_phylink_get_lpi_caps(config);
 }
 
 static struct phylink_pcs *gsw1xx_phylink_mac_select_pcs(struct phylink_config *config,
@@ -769,11 +799,32 @@ static const struct gswip_hw_info gsw141_data = {
 	.tag_protocol		= DSA_TAG_PROTO_MXL_GSW1XX,
 };
 
+static const struct gswip_hw_info gsw150_data = {
+	.max_ports		= GSW150_PORTS,
+	.allowed_cpu_ports	= BIT(5) | BIT(6),
+	.mii_cfg = {
+		[0 ... 4] = -1,
+		[5] = 0,
+		[6] = 10,
+	},
+	.mii_pcdu = {
+		[0 ... 4] = -1,
+		[5] = 1,
+		[6] = 11,
+	},
+	.phylink_get_caps	= gsw150_phylink_get_caps,
+	.pce_microcode		= &gsw1xx_pce_microcode,
+	.pce_microcode_size	= ARRAY_SIZE(gsw1xx_pce_microcode),
+	.tag_protocol		= DSA_TAG_PROTO_MXL_GSW1XX,
+};
+
 /*
  * GSW125 is the industrial temperature version of GSW120.
  * GSW145 is the industrial temperature version of GSW140.
  */
 static const struct of_device_id gsw1xx_of_match[] = {
+	{ .compatible = "intel,gsw150", .data = &gsw150_data },
+	{ .compatible = "lantiq,peb7084", .data = &gsw150_data },
 	{ .compatible = "maxlinear,gsw120", .data = &gsw12x_data },
 	{ .compatible = "maxlinear,gsw125", .data = &gsw12x_data },
 	{ .compatible = "maxlinear,gsw140", .data = &gsw140_data },
@@ -797,5 +848,5 @@ static struct mdio_driver gsw1xx_driver = {
 mdio_module_driver(gsw1xx_driver);
 
 MODULE_AUTHOR("Daniel Golle <[email protected]>");
-MODULE_DESCRIPTION("Driver for MaxLinear GSW1xx ethernet switch");
+MODULE_DESCRIPTION("Driver for Intel/MaxLinear GSW1xx Ethernet switch");
 MODULE_LICENSE("GPL");
drivers/net/dsa/lantiq/mxl-gsw1xx.h +2 -0
index 38e03c048a26c..087587f62e5e1 100644
@@ -10,6 +10,8 @@
 #include <linux/bitfield.h>
 
 #define GSW1XX_PORTS				6
+#define GSW150_PORTS				7
+
 /* Port used for RGMII or optional RMII */
 #define GSW1XX_MII_PORT				5
 /* Port used for SGMII */
Signature · 1 line
2.52.0