Fix typos in network driver code comments

index 270ff9aab335..d2623e35de43 100644
@@ -672,7 +672,7 @@ struct be_adapter {
 	struct be_error_recovery error_recovery;
 };
 
-/* Used for defered FW config cmds. Add fields to this struct as reqd */
+/* Used for deferred FW config cmds. Add fields to this struct as reqd */
 struct be_cmd_work {
 	struct work_struct work;
 	struct be_adapter *adapter;

@@ -700,19 +700,19 @@ struct be_cmd_work {
 #define be_max_rxqs(adapter)		(adapter->res.max_rx_qs)
 /* Max number of EQs available for the function (NIC + RoCE (if enabled)) */
 #define be_max_func_eqs(adapter)	(adapter->res.max_evt_qs)
-/* Max number of EQs available avaialble only for NIC */
+/* Max number of EQs available only for NIC */
 #define be_max_nic_eqs(adapter)		(adapter->res.max_nic_evt_qs)
 #define be_if_cap_flags(adapter)	(adapter->res.if_cap_flags)
 #define be_max_pf_pool_rss_tables(adapter)	\
 				(adapter->pool_res.max_rss_tables)
-/* Max irqs avaialble for NIC */
+/* Max irqs available for NIC */
 #define be_max_irqs(adapter)		\
 			(min_t(u16, be_max_nic_eqs(adapter), num_online_cpus()))
 
 /* Max irqs *needed* for RX queues */
 static inline u16 be_max_rx_irqs(struct be_adapter *adapter)
 {
-	/* If no RSS, need atleast one irq for def-RXQ */
+	/* If no RSS, need at least one irq for def-RXQ */
 	u16 num = max_t(u16, be_max_rss(adapter), 1);
 
 	return min_t(u16, num, be_max_irqs(adapter));

index bb5d2fa15736..3a032d4ac598 100644
@@ -1941,7 +1941,7 @@ int be_cmd_modify_eqd(struct be_adapter *adapter, struct be_set_eqd *set_eqd,
 	return 0;
 }
 
-/* Uses sycnhronous mcc */
+/* Uses synchronous mcc */
 int be_cmd_vlan_config(struct be_adapter *adapter, u32 if_id, u16 *vtag_array,
 		       u32 num, u32 domain)
 {

@@ -2035,7 +2035,7 @@ int be_cmd_rx_filter(struct be_adapter *adapter, u32 flags, u32 value)
 	return __be_cmd_rx_filter(adapter, flags, value);
 }
 
-/* Uses synchrounous mcc */
+/* Uses synchronous mcc */
 int be_cmd_set_flow_control(struct be_adapter *adapter, u32 tx_fc, u32 rx_fc)
 {
 	struct be_mcc_wrb *wrb;

@@ -2074,7 +2074,7 @@ int be_cmd_set_flow_control(struct be_adapter *adapter, u32 tx_fc, u32 rx_fc)
 	return status;
 }
 
-/* Uses sycn mcc */
+/* Uses sync mcc */
 int be_cmd_get_flow_control(struct be_adapter *adapter, u32 *tx_fc, u32 *rx_fc)
 {
 	struct be_mcc_wrb *wrb;

index 5e2d3ddb5d43..fcc298ce2c77 100644
@@ -1134,14 +1134,14 @@ struct be_cmd_resp_get_fw_version {
 	u8 fw_on_flash_version_string[FW_VER_LEN];
 } __packed;
 
-/******************** Set Flow Contrl *******************/
+/******************** Set Flow Control *******************/
 struct be_cmd_req_set_flow_control {
 	struct be_cmd_req_hdr hdr;
 	u16 tx_flow_control;
 	u16 rx_flow_control;
 } __packed;
 
-/******************** Get Flow Contrl *******************/
+/******************** Get Flow Control *******************/
 struct be_cmd_req_get_flow_control {
 	struct be_cmd_req_hdr hdr;
 	u32 rsvd;

@@ -2069,7 +2069,7 @@ struct be_cmd_resp_get_stats_v2 {
 	struct be_hw_stats_v2 hw_stats;
 };
 
-/************** get fat capabilites *******************/
+/************** get fat capabilities *******************/
 #define MAX_MODULES 27
 #define MAX_MODES 4
 #define MODE_UART 0

index f9216326bdfe..f55f1fd5d90f 100644
@@ -142,7 +142,7 @@ static const struct be_ethtool_stat et_rx_stats[] = {
 	 * to HW.
 	 */
 	{DRVSTAT_RX_INFO(rx_post_fail)},
-	/* Recevied packets dropped due to skb allocation failure */
+	/* Received packets dropped due to skb allocation failure */
 	{DRVSTAT_RX_INFO(rx_drops_no_skbs)},
 	/* Received packets dropped due to lack of available fetched buffers
 	 * posted by the driver.

@@ -189,7 +189,7 @@ static const struct be_ethtool_stat et_tx_stats[] = {
 	{DRVSTAT_TX_INFO(tx_bytes)},
 	{DRVSTAT_TX_INFO(tx_pkts)},
 	{DRVSTAT_TX_INFO(tx_vxlan_offload_pkts)},
-	/* Number of skbs queued for trasmission by the driver */
+	/* Number of skbs queued for transmission by the driver */
 	{DRVSTAT_TX_INFO(tx_reqs)},
 	/* Number of times the TX queue was stopped due to lack
 	 * of spaces in the TXQ.

@@ -1222,7 +1222,7 @@ static void be_get_channels(struct net_device *netdev,
 	ch->tx_count = adapter->num_tx_qs - ch->combined_count;
 
 	ch->max_combined = be_max_qp_irqs(adapter);
-	/* The user must create atleast one combined channel */
+	/* The user must create at least one combined channel */
 	ch->max_rx = be_max_rx_irqs(adapter) - 1;
 	ch->max_tx = be_max_tx_irqs(adapter) - 1;
 }

index 3476194f0855..42e83ff9c52f 100644
@@ -16,7 +16,7 @@
  * The software must write this register twice to post any command. First,
  * it writes the register with hi=1 and the upper bits of the physical address
  * for the MAILBOX structure. Software must poll the ready bit until this
- * is acknowledged. Then, sotware writes the register with hi=0 with the lower
+ * is acknowledged. Then, software writes the register with hi=0 with the lower
  * bits in the address. It must poll the ready bit until the command is
  * complete. Upon completion, the MAILBOX will contain a valid completion
  * queue entry.

@@ -27,7 +27,7 @@
 
 #define MPU_EP_CONTROL 		0
 
-/********** MPU semphore: used for SH & BE  *************/
+/********** MPU semaphore: used for SH & BE  *************/
 #define SLIPORT_SOFTRESET_OFFSET		0x5c	/* CSR BAR offset */
 #define SLIPORT_SEMAPHORE_OFFSET_BEx		0xac  /* CSR BAR offset */
 #define SLIPORT_SEMAPHORE_OFFSET_SH		0x94  /* PCI-CFG offset */

@@ -39,7 +39,7 @@
 /* Soft Reset register masks */
 #define SLIPORT_SOFTRESET_SR_MASK		0x00000080	/* SR bit */
 
-/* MPU semphore POST stage values */
+/* MPU semaphore POST stage values */
 #define POST_STAGE_AWAITING_HOST_RDY 	0x1 /* FW awaiting goahead from host */
 #define POST_STAGE_HOST_RDY 		0x2 /* Host has given go-ahed to FW */
 #define POST_STAGE_BE_RESET		0x3 /* Host wants to reset chip */

index 5bb31c8fab39..b633c6e2bab7 100644
@@ -61,7 +61,7 @@ static const struct pci_device_id be_dev_ids[] = {
 };
 MODULE_DEVICE_TABLE(pci, be_dev_ids);
 
-/* Workqueue used by all functions for defering cmd calls to the adapter */
+/* Workqueue used by all functions for deferring cmd calls to the adapter */
 static struct workqueue_struct *be_wq;
 
 /* UE Status Low CSR */

@@ -1129,7 +1129,7 @@ static struct sk_buff *be_lancer_xmit_workarounds(struct be_adapter *adapter,
 	struct iphdr *ip;
 
 	/* For padded packets, BE HW modifies tot_len field in IP header
-	 * incorrecly when VLAN tag is inserted by HW.
+	 * incorrectly when VLAN tag is inserted by HW.
 	 * For padded packets, Lancer computes incorrect checksum.
 	 */
 	eth_hdr_len = ntohs(skb->protocol) == ETH_P_8021Q ?

@@ -2568,7 +2568,7 @@ static struct be_rx_compl_info *be_rx_compl_get(struct be_rx_obj *rxo)
 			rxcp->vlanf = 0;
 	}
 
-	/* As the compl has been parsed, reset it; we wont touch it again */
+	/* As the compl has been parsed, reset it; we won't touch it again */
 	compl->dw[offsetof(struct amap_eth_rx_compl_v1, valid) / 32] = 0;
 
 	queue_tail_inc(&rxo->cq);

@@ -2727,7 +2727,7 @@ static struct be_tx_compl_info *be_tx_compl_get(struct be_adapter *adapter,
 	if (txcp->status) {
 		if (lancer_chip(adapter)) {
 			lancer_update_tx_err(txo, txcp->status);
-			/* Reset the adapter incase of TSO,
+			/* Reset the adapter in case of TSO,
 			 * SGE or Parity error
 			 */
 			if (txcp->status == LANCER_TX_COMP_LSO_ERR ||

@@ -3125,7 +3125,7 @@ static int be_rx_cqs_create(struct be_adapter *adapter)
 	adapter->num_rss_qs =
 			min(adapter->num_evt_qs, adapter->cfg_num_rx_irqs);
 
-	/* We'll use RSS only if atleast 2 RSS rings are supported. */
+	/* We'll use RSS only if at least 2 RSS rings are supported. */
 	if (adapter->num_rss_qs < 2)
 		adapter->num_rss_qs = 0;
 

@@ -3167,7 +3167,7 @@ static irqreturn_t be_intx(int irq, void *dev)
 	/* IRQ is not expected when NAPI is scheduled as the EQ
 	 * will not be armed.
 	 * But, this can happen on Lancer INTx where it takes
-	 * a while to de-assert INTx or in BE2 where occasionaly
+	 * a while to de-assert INTx or in BE2 where occasionally
 	 * an interrupt may be raised even when EQ is unarmed.
 	 * If NAPI is already scheduled, then counting & notifying
 	 * events will orphan them.

@@ -4415,7 +4415,7 @@ static void be_setup_init(struct be_adapter *adapter)
 /* HW supports only MAX_PORT_RSS_TABLES RSS Policy Tables per port.
  * However, this HW limitation is not exposed to the host via any SLI cmd.
  * As a result, in the case of SRIOV and in particular multi-partition configs
- * the driver needs to calcuate a proportional share of RSS Tables per PF-pool
+ * the driver needs to calculate a proportional share of RSS Tables per PF-pool
  * for distribution between the VFs. This self-imposed limit will determine the
  * no: of VFs for which RSS can be enabled.
  */

@@ -4519,7 +4519,7 @@ static int be_get_resources(struct be_adapter *adapter)
 		if (status)
 			return status;
 
-		/* If a deafault RXQ must be created, we'll use up one RSSQ*/
+		/* If a default RXQ must be created, we'll use up one RSSQ*/
 		if (res.max_rss_qs && res.max_rss_qs == res.max_rx_qs &&
 		    !(res.if_cap_flags & BE_IF_FLAGS_DEFQ_RSS))
 			res.max_rss_qs -= 1;

index 541c41a9077a..b7cf2ee9115f 100644
@@ -242,7 +242,7 @@ static void ks8842_reset(struct ks8842_adapter *adapter)
 		msleep(10);
 		iowrite16(0, adapter->hw_addr + REG_GRR);
 	} else {
-		/* The KS8842 goes haywire when doing softare reset
+		/* The KS8842 goes haywire when doing software reset
 		* a work around in the timberdale IP is implemented to
 		* do a hardware reset instead
 		ks8842_write16(adapter, 3, 1, REG_GRR);

@@ -312,7 +312,7 @@ static void ks8842_reset_hw(struct ks8842_adapter *adapter)
 	/* aggressive back off in half duplex */
 	ks8842_enable_bits(adapter, 32, 1 << 8, REG_SGCR1);
 
-	/* enable no excessive collison drop */
+	/* enable no excessive collision drop */
 	ks8842_enable_bits(adapter, 32, 1 << 3, REG_SGCR2);
 
 	/* Enable port 1 force flow control / back pressure / transmit / recv */

index bb5138806c3f..8048770958d6 100644
@@ -480,7 +480,7 @@ static int ks8851_net_open(struct net_device *dev)
  * ks8851_net_stop - close network device
  * @dev: The device being closed.
  *
- * Called to close down a network device which has been active. Cancell any
+ * Called to close down a network device which has been active. Cancel any
  * work, shutdown the RX and TX process and then place the chip into a low
  * power state whilst it is not being used.
  */

index c862b13b447a..a161ae45743a 100644
@@ -39,7 +39,7 @@ static int msg_enable;
  *
  * The @lock ensures that the chip is protected when certain operations are
  * in progress. When the read or write packet transfer is in progress, most
- * of the chip registers are not ccessible until the transfer is finished and
+ * of the chip registers are not accessible until the transfer is finished and
  * the DMA has been de-asserted.
  */
 struct ks8851_net_spi {

@@ -298,7 +298,7 @@ static unsigned int calc_txlen(unsigned int len)
 
 /**
  * ks8851_tx_work - process tx packet(s)
- * @work: The work strucutre what was scheduled.
+ * @work: The work structure what was scheduled.
  *
  * This is called when a number of packets have been scheduled for
  * transmission and need to be sent to the device.

index cdde19b8edc4..60223f03482d 100644
@@ -1166,7 +1166,7 @@ struct ksz_port_info {
  * @tx_cfg:		Cached transmit control settings.
  * @rx_cfg:		Cached receive control settings.
  * @intr_mask:		Current interrupt mask.
- * @intr_set:		Current interrup set.
+ * @intr_set:		Current interrupt set.
  * @intr_blocked:	Interrupt blocked.
  * @rx_desc_info:	Receive descriptor information.
  * @tx_desc_info:	Transmit descriptor information.

@@ -2096,7 +2096,7 @@ static void sw_dis_prio_rate(struct ksz_hw *hw, int port)
 }
 
 /**
- * sw_init_prio_rate - initialize switch prioirty rate
+ * sw_init_prio_rate - initialize switch priority rate
  * @hw: 	The hardware instance.
  *
  * This routine initializes the priority rate function of the switch.

index 45ddce35f6d2..c6b2eba3511b 100644
@@ -3,7 +3,7 @@
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Softare Foundation; or, when distributed
+ * as published by the Free Software Foundation; or, when distributed
  * separately from the Linux kernel or incorporated into other
  * software packages, subject to the following license:
  *