Initial support for Samsung Galaxy Tab 2 series
Subsystems (8)
v4 cover Initial support for Samsung Galaxy Tab 2 series
From: Mithil <[email protected]>
This series adds initial support for the Samsung Galaxy Tab 2 (samsung-espresso7/10) series of devices. It adds support for 6 variants (P3100, P3110, P3113, P5100, P5110, P5113). Downstream categorised them based on 3G and WiFi, but since they use different panel, touch controllers, batteries, I decided to categorise them based on screen size as espresso7 and espresso10.
It adds basic functionality for both the models including panel, drm, sdcard, touchscreen, mmc, wifi, bluetooth, keys, battery, fuel gauge, pmic, sensors.
---
Changes in v4
- Fixed syntax in doestek vendor
- Changed - to _ in node names
- Removed address/size-cells in chosen
- Added pinmux for i2c-gpio5,6,7, irled
- Allow sdcard to poweroff (reg_espresso_external)
- Changed power to key-power
- Order alphabetically in omap4_pmx_wkup and omap4_pmx_core
- Use generic node names
- Added TODO for future nodes
- Fix touchscreen values in espresso7 and espresso10
- Add dts to Makefile
- Commit message length under 75
- Link to v3: https://lore.kernel.org/linux-omap/[email protected]/
Changes in v3
- Use device tree from the correct branch
- Fix commit subjects to matching the subsystem
- Add Doestek vendor
- Add compatible for LVDS encoder
- Add compatibles for 7 and 10 inch panels
- Clean up device tree using "make CHECK_DTBS=y"
- Link to v2: https://lore.kernel.org/all/[email protected]/
Changes in v2
- Fix node names in common dtsi to have - instead of _
- Removed import for twl6030.dtsi
- Edited dts to completely use twl6032 nodes
- Fixed typo ldosb -> ldousb
- Link to v1: https://lore.kernel.org/all/[email protected]/
--
Mithil Bavishi (10):
ARM: dts: twl6032: Add DTS file for TWL6032 PMIC
dt-bindings: vendor-prefixes: Add Doestek
dt-bindings: display: bridge: lvds-codec: add doestek,dtc34lm85am
dt-bindings: display: panel-lvds: Add compatible for Samsung
LTN070NL01 Panel
dt-bindings: display: panel-lvds: Add compatible for Samsung
LTN101AL03 Panel
ARM: dts: ti: omap: espresso-common: Add common device tree for
Samsung Galaxy Tab 2 series
dt-bindings: omap: Add Samsung Galaxy Tab 2 7.0
ARM: dts: ti: omap: samsung-espresso7: Add initial support for Galaxy
Tab 2 7.0
dt-bindings: omap: Add Samsung Galaxy Tab 2 10.1
ARM: dts: ti: omap: samsung-espresso10: Add initial support for Galaxy
Tab 2 10.1.../devicetree/bindings/arm/ti/omap.yaml | 2 + .../bindings/display/bridge/lvds-codec.yaml | 1 + .../bindings/display/panel/panel-lvds.yaml | 4 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm/boot/dts/ti/omap/Makefile | 2 + .../omap/omap4-samsung-espresso-common.dtsi | 762 ++ .../dts/ti/omap/omap4-samsung-espresso10.dts | 104 + .../dts/ti/omap/omap4-samsung-espresso7.dts | 70 + arch/arm/boot/dts/ti/omap/twl6032.dtsi | 77 + arch/arm/configs/espresso_defconfig | 7506 +++++++++++++++++ 10 files changed, 8530 insertions(+) create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso-common.dtsi create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dts create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts create mode 100644 arch/arm/boot/dts/ti/omap/twl6032.dtsi create mode 100644 arch/arm/configs/espresso_defconfig
Signature · 1 line
2.43.0
PATCH v4 1/10 ARM: dts: twl6032: Add DTS file for TWL6032 PMIC
Add a dedicated DTS file for the TWL6032 PMIC (Phoenix Lite). Already has driver support with TWL6030 (Phoenix) since both of them are so similar, some nodes can be reused from TWL6030 as well.
This can be included in the board files like twl6030. Example:
...
&i2c1 {
twl: twl@48 {
reg = <0x48>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
interrupt-parent = <&gic>;
};
};/include/ "twl6032.dtsi"
...
Used in devices like samsung-espresso, amazon-jem, epson-embt2ws etc.
--- arch/arm/boot/dts/ti/omap/twl6032.dtsi | 77 ++++++++++++++++++++++++++ 1 file changed, 77 insertions(+) create mode 100644 arch/arm/boot/dts/ti/omap/twl6032.dtsi
arch/arm/boot/dts/ti/omap/twl6032.dtsi new file +77 -0
@@ -0,0 +1,77 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Integrated Power Management Chip + * https://www.ti.com/lit/ds/symlink/twl6032.pdf + */ + +&twl { + compatible = "ti,twl6032"; + interrupt-controller; + #interrupt-cells = <1>; + + rtc { + compatible = "ti,twl4030-rtc"; + interrupts = <11>; + }; + + vio: regulator-vio { + compatible = "ti,twl6032-vio"; + }; + + ldo1: regulator-ldo1 { + compatible = "ti,twl6032-ldo1"; + }; + + ldo2: regulator-ldo2 { + compatible = "ti,twl6032-ldo2"; + }; + + ldo3: regulator-ldo3 { + compatible = "ti,twl6032-ldo3"; + }; + + ldo4: regulator-ldo4 { + compatible = "ti,twl6032-ldo4"; + }; + + ldo5: regulator-ldo5 { + compatible = "ti,twl6032-ldo5"; + }; + + ldo6: regulator-ldo6 { + compatible = "ti,twl6032-ldo6"; + }; + + ldoln: regulator-ldoln { + compatible = "ti,twl6032-ldoln"; + }; + + ldousb: regulator-ldousb { + compatible = "ti,twl6032-ldousb"; + }; + + smps4: regulator-smps4 { + compatible = "ti,twl6032-smps4"; + }; + + gpadc: gpadc { + compatible = "ti,twl6032-gpadc"; + interrupts = <3>; + #io-channel-cells = <1>; + }; + + twl_usb_comparator: usb-comparator { + compatible = "ti,twl6030-usb"; + interrupts = <4>, <10>; + }; + + twl_pwm: pwm { + compatible = "ti,twl6030-pwm"; + #pwm-cells = <2>; + }; + + twl_pwmled: pwmled { + compatible = "ti,twl6030-pwmled"; + #pwm-cells = <2>; + }; +};
Signature · 1 line
2.43.0
PATCH v4 2/10 dt-bindings: vendor-prefixes: Add Doestek
In reply to Mithil BavishiAdd vendor prefix for Doestek Co., Ltd.
--- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
@@ -437,6 +437,8 @@ patternProperties: description: D-Link Corporation "^dmo,.*": description: Data Modul AG + "^doestek,.*": + description: Doestek Co., Ltd. "^domintech,.*": description: Domintech Co., Ltd. "^dongwoon,.*":
Signature · 1 line
2.43.0
PATCH v4 3/10 dt-bindings: display: bridge: lvds-codec: add doestek,dtc34lm85am
In reply to Mithil BavishiAdd compatible strings for the Doestek DTC34LM85AM Flat Panel Display Transmitter
--- Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml +1 -0
@@ -33,6 +33,7 @@ properties: oneOf: - items: - enum: + - doestek,dtc34lm85am # For the Doestek DTC34LM85AM Flat Panel Display (FPD) Transmitter - ti,ds90c185 # For the TI DS90C185 FPD-Link Serializer - ti,ds90c187 # For the TI DS90C187 FPD-Link Serializer - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter
Signature · 1 line
2.43.0
PATCH v4 4/10 dt-bindings: display: panel-lvds: Add compatible for Samsung LTN070NL01 Panel
In reply to Mithil BavishiThe LTN070NL01 is a 7.0 inch 1024x600, 24 bit, VESA Compatible, TFT display panel
--- Documentation/devicetree/bindings/display/panel/panel-lvds.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/display/panel/panel-lvds.yaml +2 -0
@@ -58,6 +58,8 @@ properties: - hydis,hv070wx2-1e0 # Jenson Display BL-JT60050-01A 7" WSVGA (1024x600) color TFT LCD LVDS panel - jenson,bl-jt60050-01a + # Samsung LTN070NL01 7.0" WSVGA (1024x600) TFT LCD LVDS panel + - samsung,ltn070nl01 - tbs,a711-panel # Winstar WF70A8SYJHLNGA 7" WSVGA (1024x600) color TFT LCD LVDS panel - winstar,wf70a8syjhlnga
Signature · 1 line
2.43.0
PATCH v4 5/10 dt-bindings: display: panel-lvds: Add compatible for Samsung LTN101AL03 Panel
In reply to Mithil BavishiThe LTN101AL03 is a 10.1 inch 800x1280, 24 bit, VESA Compatible, TFT display panel
--- Documentation/devicetree/bindings/display/panel/panel-lvds.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/display/panel/panel-lvds.yaml +2 -0
@@ -60,6 +60,8 @@ properties: - jenson,bl-jt60050-01a # Samsung LTN070NL01 7.0" WSVGA (1024x600) TFT LCD LVDS panel - samsung,ltn070nl01 + # Samsung LTN101AL03 10.1" WXGA (800x1280) TFT LCD LVDS panel + - samsung,ltn101al03 - tbs,a711-panel # Winstar WF70A8SYJHLNGA 7" WSVGA (1024x600) color TFT LCD LVDS panel - winstar,wf70a8syjhlnga
Signature · 1 line
2.43.0
PATCH v4 6/10 ARM: dts: ti: omap: espresso-common: Add common device tree for Samsung Galaxy Tab 2 series
In reply to Mithil BavishiCreate common device tree for Samsung Espresso series devices
Let's create a common tree for all the variants first. Later we can device specific trees based on their screen sizes.
--- .../omap/omap4-samsung-espresso-common.dtsi | 762 ++++++++++++++++++ 1 file changed, 762 insertions(+) create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso-common.dtsi
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso-common.dtsi new file +762 -0
@@ -0,0 +1,762 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/dts-v1/; +#include "dt-bindings/gpio/gpio.h" +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> +#include "omap443x.dtsi" + +/ { + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + continuous_splash: framebuffer@bef00000{ + reg = <0xbef00000 (1024 * 600 * 4)>; + no-map; + }; + }; + + chosen { + stdout-path = &uart3; + #address-cells = <1>; + }; + + i2c-gpio5 { + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + sda-gpios = <&gpio4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <10>; + #address-cells = <1>; + #size-cells = <0>; + + /* TODO: SMB136 Charger for 7" variant at 0x4d */ + }; + + i2c-gpio6 { + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + sda-gpios = <&gpio3 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio3 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <10>; + #address-cells = <1>; + #size-cells = <0>; + + /* TODO: STMPE811 ADC at 0x41 */ + }; + + i2c-gpio7 { + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_pins>; + sda-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio2 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <3>; + #address-cells = <1>; + #size-cells = <0>; + + fuel-gauge@36 { + compatible = "maxim,max17042"; + reg = <0x36>; + pinctrl-0 = <&fuel_alert_irq>; + pinctrl-names = "default"; + interrupt-parent = <&gpio2>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + maxim,rsns-microohm = <10000>; + maxim,over-heat-temp = <500>; + maxim,dead-volt = <2500>; + maxim,over-volt = <4300>; + }; + }; + + reg_espresso_wlan: regulator-espresso-wlan { + pinctrl-names = "default"; + pinctrl-0 = <&wlanen_gpio>; + compatible = "regulator-fixed"; + regulator-name = "espresso_wlan"; + regulator-max-microvolt = <2000000>; + regulator-min-microvolt = <2000000>; + gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO_104 */ + startup-delay-us = <70000>; + regulator-always-on; + enable-active-high; + }; + + wlan_pwrseq: wlan-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&twl 0>; + clock-names = "ext_clock"; + }; + + reg_espresso_internal: regulator-espresso-internal { + compatible = "regulator-fixed"; + regulator-name = "eMMC_LDO"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; /* GPIO_63 */ + startup-delay-us = <100000>; + regulator-boot-on; + regulator-always-on; + enable-active-high; + }; + + reg_espresso_external: regulator-espresso-external { + compatible = "regulator-fixed"; + regulator-name = "vmmc1"; + regulator-max-microvolt = <2800000>; + regulator-min-microvolt = <2800000>; + gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; /* GPIO_34 */ + enable-active-high; + }; + + reg_touch_ldo_en: regulator-touch-ldo-en { + compatible = "regulator-fixed"; + regulator-name = "touch_ldo_en"; + regulator-max-microvolt = <2800000>; + regulator-min-microvolt = <2800000>; + gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* GPIO_54 */ + regulator-always-on; + enable-active-high; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys>; + + key-power { + label = "power"; + + gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; /* GPIO_wk3 */ + linux,code = <KEY_POWER>; + wakeup-source; + }; + + button-volup { + linux,code = <KEY_VOLUMEUP>; + label = "volume_up"; /* GPIO_wk30 */ + gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + }; + + button-voldown { + linux,code = <KEY_VOLUMEDOWN>; + label = "volume_down"; /* GPIO_wk8 */ + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + }; + }; + + reg_lcd: regulator-lcd { + compatible = "regulator-fixed"; + regulator-name = "lcd_en"; + gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>; /* GPIO_135 */ + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + enable-active-high; + regulator-boot-on; + }; + + pwm10: pwm-10 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm10_default>; + compatible = "ti,omap-dmtimer-pwm"; + #pwm-cells = <3>; + ti,timers = <&timer10>; + ti,clock-source = <0x00>; + }; + + lvds-encoder { + compatible = "doestek,dtc34lm85am", "lvds-encoder"; + powerdown-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; /* GPIO_136 */ + power-supply = <®_lcd>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; + + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; /* GPIO_38 */ + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_default>; + }; + + gp2a_shunt: current-sense-shunt { + compatible = "current-sense-shunt"; + io-channels = <&gpadc 4>; + shunt-resistor-micro-ohms = <24000000>; /* 24 ohms */ + #io-channel-cells = <0>; + }; + + led-ir { + compatible = "gpio-ir-tx"; + gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* GPIO_59 */ + pinctrl-names = "default"; + pinctrl-0 = <&ledir_pins>; + }; +}; + +&omap4_pmx_wkup { + gpio_keys: gpio-keys-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x046, WAKEUP_EN | PIN_INPUT | MUX_MODE3) + /* sim_cd.gpio_wk3 - EXT_WAKEUP */ + OMAP4_IOPAD(0x056, WAKEUP_EN | PIN_INPUT | MUX_MODE3) + /* fref_clk3_req.gpio_wk30 - VOL_UP */ + OMAP4_IOPAD(0x05C, WAKEUP_EN | PIN_INPUT | MUX_MODE3) + /* fref_clk4_out.gpio_wk8 - VOL_DN */ + >; + }; + + prox_irq: prox-irq-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x042, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE3) + /* sim_clk.gpio_wk1 - PS_VOUT */ + >; + }; +}; + +&omap4_pmx_core { + backlight_pins: pinmux-backlight-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0X0D8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3) + /* usbb1_ulpitll_dat7.gpio_95 - LED_BACKLIGHT_RESET */ + >; + }; + + bluetooth_pins: pinmux-bluetooth-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3) + /* gpmc_ncs6.gpio_103 - BT_EN */ + OMAP4_IOPAD(0x0be, PIN_OUTPUT | MUX_MODE3) + /* cam_strobe.gpio_82 - BT_nRST */ + OMAP4_IOPAD(0x0c0, WAKEUP_EN | PIN_INPUT | MUX_MODE3) + /* cam_globalreset.gpio_83 - BT_HOST_WAKE */ + OMAP4_IOPAD(0x0d4, PIN_OUTPUT | MUX_MODE3) + /* usbb1_ulpitll_dat5.gpio_93 - BT_WAKE */ + >; + }; + + dss_dpi_pins: pinmux-dss-dpi-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x162, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data23 */ + OMAP4_IOPAD(0x164, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data22 */ + OMAP4_IOPAD(0x166, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data21 */ + OMAP4_IOPAD(0x168, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data20 */ + OMAP4_IOPAD(0x16a, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data19 */ + OMAP4_IOPAD(0x16c, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data18 */ + OMAP4_IOPAD(0x16e, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data15 */ + OMAP4_IOPAD(0x170, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data14 */ + OMAP4_IOPAD(0x172, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data13 */ + OMAP4_IOPAD(0x174, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data12 */ + OMAP4_IOPAD(0x176, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data11 */ + OMAP4_IOPAD(0x1b4, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data10 */ + OMAP4_IOPAD(0x1b6, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data9 */ + OMAP4_IOPAD(0x1b8, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data16 */ + OMAP4_IOPAD(0x1ba, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data17 */ + OMAP4_IOPAD(0x1bc, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_hsync */ + OMAP4_IOPAD(0x1be, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_pclk */ + OMAP4_IOPAD(0x1c0, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_vsync */ + OMAP4_IOPAD(0x1c2, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_de */ + OMAP4_IOPAD(0x1c4, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data8 */ + OMAP4_IOPAD(0x1c6, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data7 */ + OMAP4_IOPAD(0x1c8, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data6 */ + OMAP4_IOPAD(0x1ca, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data5 */ + OMAP4_IOPAD(0x1cc, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data4 */ + OMAP4_IOPAD(0x1ce, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data3 */ + + OMAP4_IOPAD(0x1d0, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data2 */ + OMAP4_IOPAD(0x1d2, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data1 */ + OMAP4_IOPAD(0x1d4, PIN_OFF_OUTPUT_LOW | MUX_MODE5) + /* dispc2_data0 */ + >; + }; + + fuel_alert_irq: pinmux-fuel-alert-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x068, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE3) + /* gpmc_a20.gpio_44 */ + >; + }; + + gp2a_irq: pinmux-gp2a-irq-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x052, WAKEUP_EN | PIN_INPUT | MUX_MODE3) + /* gpmc_ad9.gpio_33 - ALS_INT_18 */ + >; + }; + + i2c1_pins: pinmux-i2c1-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) + /* i2c1_scl */ + OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) + /* i2c1_sda */ + >; + }; + + i2c2_pins: pinmux-i2c2-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) + /* i2c2_scl */ + OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) + /* i2c2_sda */ + >; + }; + + i2c3_pins: pinmux-i2c3-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) + /* i2c3_scl */ + OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) + /* i2c3_sda */ + >; + }; + + i2c4_pins: pinmux-i2c4-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) + /* i2c4_scl */ + OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) + /* i2c4_sda */ + >; + }; + + i2c5_pins: pinmux-i2c5-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0de, PIN_INPUT_PULLUP | MUX_MODE3) + /* usbc1_icusb_dp.gpio_98 */ + OMAP4_IOPAD(0x0e0, PIN_INPUT_PULLUP | MUX_MODE3) + /* usbc1_icusb_dm.gpio_99 */ + >; + }; + + i2c6_pins: pinmux-i2c6-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE3) + /* hdmi_ddc_scl.gpio_65 */ + OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE3) + /* hdmi_ddc_sda.gpio_66 */ + >; + }; + + i2c7_pins: pinmux-i2c7-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x08a, PIN_INPUT_PULLUP | MUX_MODE3) + /* gpmc_wait0.gpio_61 */ + OMAP4_IOPAD(0x08c, PIN_INPUT_PULLUP | MUX_MODE3) + /* gpmc_wait1.gpio_62 */ + >; + }; + + ledir_pins: pimux-ledir-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x086, PIN_INPUT_PULLDOWN | MUX_MODE7) + /* gpmc_nbe0_cle.gpio_59 */ + OMAP4_IOPAD(0x156, PIN_INPUT_PULLDOWN | MUX_MODE7) + /* mcspi4_simo.gpio_152 */ + >; + }; + + lvds_pins: pinmux-lvds-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0X136, PIN_OUTPUT | MUX_MODE3) + /* mcspi1_simo.gpio_136 - LVDS_nSHDN */ + >; + }; + + mmc1_pins: pinmux-mmc1-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLDOWN | MUX_MODE0) + /* sdmmc1_clk */ + OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0) + /* sdmcc1_cmd */ + OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0) + /* sdmcc1_dat0 */ + OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0) + /* sdmmc1_dat1 */ + OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0) + /* sdmmc1_dat2 */ + OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0) + /* sdmmc1_dat3 */ + >; + }; + + mmc2_pins: pinmux-mmc2-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x040, PIN_INPUT_PULLUP | MUX_MODE1) + /* sdmmc2_dat0 */ + OMAP4_IOPAD(0x042, PIN_INPUT_PULLUP | MUX_MODE1) + /* sdmmc2_dat1 */ + OMAP4_IOPAD(0x044, PIN_INPUT_PULLUP | MUX_MODE1) + /* sdmmc2_dat2 */ + OMAP4_IOPAD(0x046, PIN_INPUT_PULLUP | MUX_MODE1) + /* sdmmc2_dat3 */ + OMAP4_IOPAD(0x048, PIN_INPUT_PULLUP | MUX_MODE1) + /* sdmmc2_dat4 */ + OMAP4_IOPAD(0x04a, PIN_INPUT_PULLUP | MUX_MODE1) + /* sdmmc2_dat5 */ + OMAP4_IOPAD(0x04c, PIN_INPUT_PULLUP | MUX_MODE1) + /* sdmmc2_dat6 */ + OMAP4_IOPAD(0x04e, PIN_INPUT_PULLUP | MUX_MODE1) + /* sdmmc2_dat7 */ + OMAP4_IOPAD(0x082, PIN_INPUT_PULLUP | MUX_MODE1) + /* sdmmc2_clk */ + OMAP4_IOPAD(0x084, PIN_INPUT_PULLUP | MUX_MODE1) + /* sdmmc2_cmd */ + >; + }; + + mmc5_pins: pinmux-mmc5-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x148, PIN_INPUT_PULLDOWN | MUX_MODE0) + /* sdmmc5_clk.sdmmc5_clk */ + OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) + /* sdmmc5_cmd.sdmmc5_cmd */ + OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) + /* sdmmc5_dat0.sdmmc5_dat0 */ + OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) + /* sdmmc5_dat1.sdmmc5_dat1 */ + OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) + /* sdmmc5_dat2.sdmmc5_dat2 */ + OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) + /* sdmmc5_dat3.sdmmc5_dat3 */ + >; + }; + + pwm10_default: pinmux-pwm10-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0X0D6, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE1) + /* usbb1_ulpitll_dat6.dmtimer10_pwm_evt - LED_BACKLIGHT_PWM */ + >; + }; + + touch_pins: pinmux-touch-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x06c, PIN_INPUT | MUX_MODE3) + /* gpmc_a22.gpio_46 - TSP_INT */ + >; + }; + + uart2_pins: pinmux-uart2-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) + /* uart2_cts.uart2_cts */ + OMAP4_IOPAD(0x11a, PIN_INPUT_PULLUP | MUX_MODE0) + /* uart2_rts.uart2_rts */ + OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) + /* uart2_rx.uart2_rx */ + OMAP4_IOPAD(0x11e, PIN_INPUT_PULLUP | MUX_MODE0) + /* uart2_tx.uart2_tx */ + >; + }; + + uart3_pins: pinmux-uart3-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0) + /* uart3_rx_irrx */ + OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0) + /* uart3_tx_irtx */ + >; + }; + + vibrator_default: pinmux-vibrator-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x05c, PIN_INPUT_PULLDOWN | MUX_MODE3) + /* gpmc_ad14.gpio_38 - MOTOR_EN */ + >; + }; + + wlanen_gpio: pinmux-wlanen-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3) + /* gpmc_ncs7.gpio_104 */ + >; + }; + + wlan_host_wake: pinmux-wlan-host-wake-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0bc, WAKEUP_EN | PIN_INPUT | MUX_MODE3) + /* cam_shutter.gpio_81 - WLAN_HOST_WAKE */ + >; + }; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + + interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART3_RX>; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <400000>; + + twl: pmic@48 { + reg = <0x48>; + #clock-cells = <1>; + + pinctrl-names = "default"; + pinctrl-0 = < + &twl6030_pins + &twl6030_wkup_pins + >; + + /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-parent = <&gic>; + system-power-controller; + }; +}; + +#include "twl6032.dtsi" +#include "twl6030_omap4.dtsi" + +&ldo1 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; +}; + +&ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; +}; + +&ldo4 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; +}; + +&ldo5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; +}; + +&smps4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&ldousb { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + + accelerometer@18 { + compatible = "bosch,bma254"; + reg = <0x18>; + vdd-supply = <&ldo4>; + vddio-supply = <&ldo5>; + interrupt-parent = <&gpio4>; + interrupts = <25 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>, + <26 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>; + mount-matrix = "-1", "0", "0", + "0", "1", "0", + "0", "0", "1"; + }; + + magnetometer@2e { + compatible = "yamaha,yas530"; + reg = <0x2e>; + vdd-supply = <&ldo4>; + iovdd-supply = <&ldo5>; + reset-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; + interrupts = <&gpio6 10 IRQ_TYPE_EDGE_RISING>; + }; + + light-sensor@44 { + compatible = "sharp,gp2ap002a00f"; + reg = <0x44>; + interrupt-parent = <&gpio1>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&ldo4>; + vio-supply = <&ldo4>; + io-channels = <&gp2a_shunt>; + io-channel-names = "alsout"; + sharp,proximity-far-hysteresis = /bits/ 8 <0x40>; + sharp,proximity-close-hysteresis = /bits/ 8 <0x20>; + pinctrl-names = "default"; + pinctrl-0 = <&gp2a_irq &prox_irq>; + }; +}; + +&dss { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + port { + dpi_out: endpoint { + remote-endpoint = <&bridge_in>; + data-lines = <24>; + }; + }; +}; + +&twl_usb_comparator { + usb-supply = <&ldousb>; +}; + +&usb_otg_hs { + interface-type = <1>; + mode = <3>; + power = <50>; +}; + +&mmc1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + + vmmc-supply = <®_espresso_external>; + bus-width = <4>; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + + vmmc-supply = <®_espresso_internal>; + ti,non-removable; + bus-width = <8>; +}; + +&mmc3 { + status = "disabled"; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + non-removable; + bus-width = <4>; + vmmc-supply = <®_espresso_wlan>; + mmc-pwrseq = <&wlan_pwrseq>; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc5_pins>; + + brcmf: wifi@1 { + compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + interrupt-parent = <&gpio3>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_host_wake>; + }; +}; + +&uart2 { + interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART2_RX>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + bluetooth { + compatible = "brcm,bcm4330-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&bluetooth_pins>; + shutdown-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio3 18 GPIO_ACTIVE_LOW>; + device-wakeup-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio3>; + interrupts = <19 IRQ_TYPE_EDGE_FALLING>; + }; +};
Signature · 1 line
2.43.0
PATCH v4 7/10 dt-bindings: omap: Add Samsung Galaxy Tab 2 7.0
In reply to Mithil BavishiAdd samsung-espresso7 codename for the 7 inch variant
--- Documentation/devicetree/bindings/arm/ti/omap.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/ti/omap.yaml +1 -0
@@ -144,6 +144,7 @@ properties: - motorola,droid-bionic # Motorola Droid Bionic XT875 - motorola,xyboard-mz609 - motorola,xyboard-mz617 + - samsung,espresso7 - ti,omap4-panda - ti,omap4-sdp - const: ti,omap4430
Signature · 1 line
2.43.0
Re: [PATCH v4 07/10] dt-bindings: omap: Add Samsung Galaxy Tab 2 7.0
Quoted 6 lines · Mithil Bavishi
Add samsung-espresso7 codename for the 7 inch variant
Signed-off-by Mithil Bavishi <[email protected]>--- Documentation/devicetree/bindings/arm/ti/omap.yaml | 1 + 1 file changed, 1 insertion(+)
Best regards,
Krzysztof
PATCH v4 8/10 ARM: dts: ti: omap: samsung-espresso7: Add initial support for Galaxy Tab 2 7.0
In reply to Mithil BavishiCreate a device tree for the 7 inch variants (P3100, P3110, P3113)
--- arch/arm/boot/dts/ti/omap/Makefile | 1 + .../dts/ti/omap/omap4-samsung-espresso7.dts | 70 +++++++++++++++++++ 2 files changed, 71 insertions(+) create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts
arch/arm/boot/dts/ti/omap/Makefile +1 -0
@@ -80,6 +80,7 @@ dtb-$(CONFIG_ARCH_OMAP4) += \ omap4-sdp-es23plus.dtb \ omap4-var-dvk-om44.dtb \ omap4-var-stk-om44.dtb \ + omap4-samsung-espresso7.dtb \ omap4-xyboard-mz609.dtb \ omap4-xyboard-mz617.dtb dtb-$(CONFIG_SOC_AM33XX) += \
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts new file +70 -0
70 lines not on this page · raw message
Signature · 1 line
2.43.0
PATCH v4 9/10 dt-bindings: omap: Add Samsung Galaxy Tab 2 10.1
In reply to Mithil BavishiAdd samsung-espresso10 codename for the 10 inch variant
--- Documentation/devicetree/bindings/arm/ti/omap.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/ti/omap.yaml +1 -0
@@ -145,6 +145,7 @@ properties: - motorola,xyboard-mz609 - motorola,xyboard-mz617 - samsung,espresso7 + - samsung,espresso10 - ti,omap4-panda - ti,omap4-sdp - const: ti,omap4430
Signature · 1 line
2.43.0
Re: [PATCH v4 09/10] dt-bindings: omap: Add Samsung Galaxy Tab 2 10.1
Quoted 3 lines · Mithil Bavishi
Add samsung-espresso10 codename for the 10 inch variant
Signed-off-by Mithil Bavishi <[email protected]>
<form letter>
This is a friendly reminder during the review process.
It seems my or other reviewer's previous comments were not fully addressed. Maybe the feedback got lost between the quotes, maybe you just forgot to apply it. Please go back to the previous discussion and either implement all requested changes or keep discussing them.
Thank you.
</form letter>
Best regards,
Krzysztof
Re: [PATCH v4 09/10] dt-bindings: omap: Add Samsung Galaxy Tab 2 10.1
Quoted 9 lines · Krzysztof Kozlowski
Quoted 3 lines · Mithil Bavishi
Add samsung-espresso10 codename for the 10 inch variant
Signed-off-by Mithil Bavishi <[email protected]><form letter>
This is a friendly reminder during the review process.
Quoted 8 lines
It seems my or other reviewer's previous comments were not fully addressed. Maybe the feedback got lost between the quotes, maybe you just forgot to apply it. Please go back to the previous discussion and either implement all requested changes or keep discussing them.
Thank you.
</form letter>
Both comments... When you receive a comment under one patch, you must check if it does not apply to others. This is really sloppy to send me a patch with exactly the same problem, which I asked to fix already.
Best regards,
Krzysztof
Subject: [PATCH v4 00/10] Initial support for Samsung Galaxy Tab 2 series
This series adds initial support for the Samsung Galaxy Tab 2 (samsung-espresso7/10) series of devices. It adds support for 6 variants (P3100, P3110, P3113, P5100, P5110, P5113). Downstream categorised them based on 3G and WiFi, but since they use different panel, touch controllers, batteries, I decided to categorise them based on screen size as espresso7 and espresso10.
It adds basic functionality for both the models including panel, drm, sdcard, touchscreen, mmc, wifi, bluetooth, keys, battery, fuel gauge, pmic, sensors.
---
Changes in v4
- Fixed syntax in doestek vendor
- Changed - to _ in node names
- Removed address/size-cells in chosen
- Added pinmux for i2c-gpio5,6,7, irled
- Allow sdcard to poweroff (reg_espresso_external)
- Changed power to key-power
- Order alphabetically in omap4_pmx_wkup and omap4_pmx_core
- Use generic node names
- Added TODO for future nodes
- Fix touchscreen values in espresso7 and espresso10
- Add dts to Makefile
- Commit message length under 75
- Link to v3: https://lore.kernel.org/linux-omap/[email protected]/
Changes in v3
- Use device tree from the correct branch
- Fix commit subjects to matching the subsystem
- Add Doestek vendor
- Add compatible for LVDS encoder
- Add compatibles for 7 and 10 inch panels
- Clean up device tree using "make CHECK_DTBS=y"
- Link to v2: https://lore.kernel.org/all/[email protected]/
Changes in v2
- Fix node names in common dtsi to have - instead of _
- Removed import for twl6030.dtsi
- Edited dts to completely use twl6032 nodes
- Fixed typo ldosb -> ldousb
- Link to v1: https://lore.kernel.org/all/[email protected]/
--
Mithil Bavishi (10):
ARM: dts: twl6032: Add DTS file for TWL6032 PMIC
dt-bindings: vendor-prefixes: Add Doestek
dt-bindings: display: bridge: lvds-codec: add doestek,dtc34lm85am
dt-bindings: display: panel-lvds: Add compatible for Samsung
LTN070NL01 Panel
dt-bindings: display: panel-lvds: Add compatible for Samsung
LTN101AL03 Panel
ARM: dts: ti: omap: espresso-common: Add common device tree for
Samsung Galaxy Tab 2 series
dt-bindings: omap: Add Samsung Galaxy Tab 2 7.0
ARM: dts: ti: omap: samsung-espresso7: Add initial support for Galaxy
Tab 2 7.0
dt-bindings: omap: Add Samsung Galaxy Tab 2 10.1
ARM: dts: ti: omap: samsung-espresso10: Add initial support for Galaxy
Tab 2 10.1.../devicetree/bindings/arm/ti/omap.yaml | 2 + .../bindings/display/bridge/lvds-codec.yaml | 1 + .../bindings/display/panel/panel-lvds.yaml | 4 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm/boot/dts/ti/omap/Makefile | 2 + .../omap/omap4-samsung-espresso-common.dtsi | 762 ++++++++++++++++++ .../dts/ti/omap/omap4-samsung-espresso10.dts | 104 +++ .../dts/ti/omap/omap4-samsung-espresso7.dts | 70 ++ arch/arm/boot/dts/ti/omap/twl6032.dtsi | 77 ++ 9 files changed, 1024 insertions(+) create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso-common.dtsi create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dts create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts create mode 100644 arch/arm/boot/dts/ti/omap/twl6032.dtsi
Signature · 1 line
2.43.0
PATCH v4 10/10 ARM: dts: ti: omap: samsung-espresso10: Add initial support for Galaxy Tab 2 10.1
In reply to Mithil BavishiCreate a device tree for the 10 inch variants (P5100, P5110, P5113)
--- arch/arm/boot/dts/ti/omap/Makefile | 1 + .../dts/ti/omap/omap4-samsung-espresso10.dts | 104 ++++++++++++++++++ 2 files changed, 105 insertions(+) create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dts
arch/arm/boot/dts/ti/omap/Makefile +1 -0
@@ -81,6 +81,7 @@ dtb-$(CONFIG_ARCH_OMAP4) += \ omap4-var-dvk-om44.dtb \ omap4-var-stk-om44.dtb \ omap4-samsung-espresso7.dtb \ + omap4-samsung-espresso10.dtb \ omap4-xyboard-mz609.dtb \ omap4-xyboard-mz617.dtb dtb-$(CONFIG_SOC_AM33XX) += \
arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dts new file +104 -0
104 lines not on this page · raw message
Signature · 1 line
2.43.0