arm64: defconfig: enable Kontron SMARC-sAM67 support
cover arm64: defconfig: enable Kontron SMARC-sAM67 support
Enable the modules required to make the sa67 module function properly. It is planned to add this module to KCI.
Michael Walle (3):
arm64: defconfig: enable the J721E PCI host driver
arm64: defconfig: enable TPS6594 power button module
arm64: defconfig: enable sa67mcu sensors
arch/arm64/configs/defconfig | 3 +++ 1 file changed, 3 insertions(+)
Signature · 1 line
2.47.3
PATCH 1/3 arm64: defconfig: enable the J721E PCI host driver
To enable the PCI host on the Kontron SMARC-sAM67, enable the driver for it.
--- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm64/configs/defconfig +1 -0
@@ -240,6 +240,7 @@ CONFIG_PCIE_XILINX=y CONFIG_PCIE_XILINX_DMA_PL=y CONFIG_PCIE_XILINX_NWL=y CONFIG_PCIE_XILINX_CPM=y +CONFIG_PCI_J721E_HOST=m CONFIG_PCI_IMX6_HOST=y CONFIG_PCI_LAYERSCAPE=y CONFIG_PCI_HISI=y
Signature · 1 line
2.47.3
PATCH 2/3 arm64: defconfig: enable TPS6594 power button module
In reply to Michael WalleTo enable the power button on Kontron SMARC-sAM67 modules, enable the driver for it.
--- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm64/configs/defconfig +1 -0
@@ -494,6 +494,7 @@ CONFIG_INPUT_BBNSM_PWRKEY=m CONFIG_INPUT_PM8941_PWRKEY=y CONFIG_INPUT_PM8XXX_VIBRATOR=m CONFIG_INPUT_TPS65219_PWRBUTTON=m +CONFIG_INPUT_TPS6594_PWRBUTTON=m CONFIG_INPUT_PWM_BEEPER=m CONFIG_INPUT_PWM_VIBRA=m CONFIG_INPUT_RK805_PWRKEY=m
Signature · 1 line
2.47.3
Re: [PATCH 2/3] arm64: defconfig: enable TPS6594 power button module
Quoted 6 lines · Michael Walle
To enable the power button on Kontron SMARC-sAM67 modules, enable the driver for it.
Signed-off-by Michael Walle <[email protected]>--- arch/arm64/configs/defconfig | 1 +
All these three is one change, you do everything for the same purpose - specific upstream board.
Do not split commits per line but per logical changes. Change here is:
enable defconfig options so your board will work fine.
Best regards,
Krzysztof
PATCH 3/3 arm64: defconfig: enable sa67mcu sensors
In reply to Michael WalleEnable support for the sensors on the Kontron SMARC-sAM67 board.
--- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm64/configs/defconfig +1 -0
@@ -758,6 +758,7 @@ CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM90=m CONFIG_SENSORS_PWM_FAN=m CONFIG_SENSORS_RASPBERRYPI_HWMON=m +CONFIG_SENSORS_SA67MCU=m CONFIG_SENSORS_SL28CPLD=m CONFIG_SENSORS_INA2XX=m CONFIG_SENSORS_INA3221=m
Signature · 1 line
2.47.3
Nishanth Menon
AppliedHi Michael Walle,
Quoted 9 lines · Michael Walle
Enable the modules required to make the sa67 module function properly. It is planned to add this module to KCI.
Michael Walle (3):
arm64: defconfig: enable the J721E PCI host driver
arm64: defconfig: enable TPS6594 power button module
arm64: defconfig: enable sa67mcu sensors[...]
I have applied the following to branch ti-k3-config-next on [1].
I had minor cosmetic fixups in the series (in addition to rebasing to v6.19-rc1 as it needs to be for pull-requests), do report if i need to drop the patch series if the changes I have done is not ok.
Thank you!
[1/3] arm64: defconfig: enable the J721E PCI host driver
commit: f69f88211c84d00d469ad6b9e2f7788be4644d0d
[2/3] arm64: defconfig: enable TPS6594 power button module
commit: cf6a123141e1498a9249b21c629958400bcaa580
[3/3] arm64: defconfig: enable sa67mcu sensors
commit: 3aae37fb967b0158f928c85e9c1965dd01e826c1All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
Signature · 4 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D https://ti.com/opensource
Quoted 6 lines · Nishanth Menon
Hi Michael Walle,
Quoted 3 lines · Michael Walle
Enable the modules required to make the sa67 module function properly. It is planned to add this module to KCI.
Quoted 8 lines
Quoted 6 lines
Michael Walle (3):
arm64: defconfig: enable the J721E PCI host driver
arm64: defconfig: enable TPS6594 power button module
arm64: defconfig: enable sa67mcu sensors[...]
I have applied the following to branch ti-k3-config-next on [1].
Before they get to next next, please squash them.
Best regards,
Krzysztof
Quoted 12 lines · Krzysztof Kozlowski
Quoted 11 lines · Nishanth Menon
Hi Michael Walle,
Quoted 8 lines · Michael Walle
Enable the modules required to make the sa67 module function properly. It is planned to add this module to KCI.
Michael Walle (3):
arm64: defconfig: enable the J721E PCI host driver
arm64: defconfig: enable TPS6594 power button module
arm64: defconfig: enable sa67mcu sensors
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
[...]
I have applied the following to branch ti-k3-config-next on [1].
Before they get to next next, please squash them.
Thanks for catching this.
Done. new commit 65428481cf6e174cc1bb45444ddc7489e3f2ef0d ("arm64: defconfig: Enable configurations for Kontron SMARC-sAM67")
Signature · 4 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D https://ti.com/opensource