efi_loader: disk: Add EFI_PARTITION_INFO_PROTOCOL support for MBR
cover efi_loader: disk: Add EFI_PARTITION_INFO_PROTOCOL support for MBR
This patch series extends the EFI_PARTITION_INFO_PROTOCOL implementation to also support MBR partition tables schemes.
When EFI_PARTITION_INFO_PROTOCOL was implented, only GPT support was added but this can cause compatibility issues with platforms whose boot ROM only supports MBR. This series add support for MBR partition tables to the protocol, making U-Boot compatible with systems that require a legacy MBR table.
Patches #1 to #3 are preparatory changes to remove duplicated definitions of data structures to store the MBR records.
Finally patch #4 adds the MBR support to the EFI_PARTITION_INFO_PROTOCOL implementation and patch #5 enhances the protocol selftest, to check that the partition record data is correctly filled.
Javier Martinez Canillas (5):
disk: part_dos: Move header to the main include directory
disk: part_dos: Align dos_partition_t with struct partition
disk: part_efi: Remove redundant struct partition definition
efi_loader: disk: Extend EFI_PARTITION_INFO_PROTOCOL to support MBR
efi_selftest: Enhance MBR test for PARTITION_INFO_PROTOCOL
disk/part_dos.c | 77 ++++++++++++--------
disk/part_efi.c | 4 +-
include/part.h | 14 ++++
{disk => include}/part_dos.h | 6 +-
include/part_efi.h | 19 +----
lib/efi_loader/efi_disk.c | 9 ++-
lib/efi_selftest/efi_selftest_block_device.c | 12 +++
7 files changed, 86 insertions(+), 55 deletions(-)
rename {disk => include}/part_dos.h (87%)Signature · 4 lines
2.52.0 base-commit: 6cdd7597a2fbfc1572c1b0af23d3daf1cefa2de7 branch: add-mbr-efi-part-info-proto
PATCH 1/5 disk: part_dos: Move header to the main include directory
There are two different struct definitions for MBR partition table
entries: one in part_dos.h and a nearly identical one in part_efi.h.
To enable future consolidation of these two structures, move part_dos.h to the main include directory. This makes it accessible from other parts of the codebase, such as part_efi.h, and is the first step toward removing the redundant definition.
---
disk/part_dos.c | 2 +-
{disk => include}/part_dos.h | 0
2 files changed, 1 insertion(+), 1 deletion(-)
rename {disk => include}/part_dos.h (100%)disk/part_dos.c +1 -1
@@ -19,7 +19,7 @@#include <vsprintf.h> #include <asm/unaligned.h> #include <linux/compiler.h> -#include "part_dos.h" +#include <part_dos.h> #include <part.h> #define DOS_PART_DEFAULT_SECTOR 512
include/part_dos.h renamed from disk/part_dos.h +0 -0
Signature · 1 line
2.52.0
Re: [PATCH 1/5] disk: part_dos: Move header to the main include directory
Quoted 9 lines · Javier Martinez Canillas
There are two different struct definitions for MBR partition table
entries: one inpart_dos.hand a nearly identical one inpart_efi.h.To enable future consolidation of these two structures, move
part_dos.hto the main include directory. This makes it accessible from other parts of the codebase, such aspart_efi.h, and is the first step toward removing the redundant definition.Signed-off-by Javier Martinez Canillas <[email protected]>
Signature · 1 line
Tom
PATCH 2/5 disk: part_dos: Align dos_partition_t with struct partition
In reply to Javier Martinez CanillasThe dos_partition_t struct defined in part_dos.h is nearly identical to the struct partition defined in part_efi.h. They differ primarily in how define their starting sector and number of sectors fields.
The former uses unsigned char arrays while the latter uses __le32 types. Using __le32 is preferable, as it removes the ambiguity and potential misuse of a raw byte array. This also aligns the structure with how the Linux kernel defines it nowadays, which is the original source of it.
To prepare for future consolidation where one of the data structures can be removed, this change aligns both definitions and updates all accessors for dos_partition_t.
---
disk/part_dos.c | 16 ++++++++-------- include/part_dos.h | 6 +++--- 2 files changed, 11 insertions(+), 11 deletions(-)
disk/part_dos.c +8 -8
@@ -49,8 +49,8 @@ static int get_bootable(dos_partition_t *p)static void print_one_part (dos_partition_t *p,lbaint_t ext_part_sector,int part_num,unsigned int disksig) { -lbaint_t lba_start = ext_part_sector +get_unaligned_le32 (p->start4); -lbaint_t lba_size =get_unaligned_le32 (p->size4); +lbaint_t lba_start = ext_part_sector +get_unaligned_le32 (&p->start_sect); +lbaint_t lba_size =get_unaligned_le32 (&p->nr_sects); printf("%3d\t%-10" LBAFlength "u\t%-10" LBAFlength "u\t%08x-%02x\t%02x%s%s\n",
@@ -185,7 +185,7 @@ static void print_partition_extended(struct blk_desc *desc,for (i =0 ; i <4 ; i++, pt++) {if (is_extended (pt->sys_ind)) {lbaint_t lba_start - =get_unaligned_le32 (pt->start4) + relative; + =get_unaligned_le32 (&pt->start_sect) + relative; print_partition_extended(desc, lba_start, !ext_part_sector ? lba_start :
@@ -252,8 +252,8 @@ static int part_get_info_extended(struct blk_desc *desc,else info->blksz =DOS_PART_DEFAULT_SECTOR ; info->start = (lbaint_t)(ext_part_sector + -get_unaligned_le32 (pt->start4)); - info->size = (lbaint_t )get_unaligned_le32 (pt->size4); +get_unaligned_le32 (&pt->start_sect)); + info->size = (lbaint_t )get_unaligned_le32 (&pt->nr_sects);part_set_generic_name (desc, part_num, (char *)info->name);/* sprintf(info->type, "%d, pt->sys_ind); */
@@ -281,7 +281,7 @@ static int part_get_info_extended(struct blk_desc *desc,for (i =0 ; i <4 ; i++, pt++) {if (is_extended (pt->sys_ind)) {lbaint_t lba_start - =get_unaligned_le32 (pt->start4) + relative; + =get_unaligned_le32 (&pt->start_sect) + relative; return part_get_info_extended(desc, lba_start, ext_part_sector == 0 ? lba_start : relative,
@@ -356,8 +356,8 @@ static void mbr_fill_pt_entry(dos_partition_t *pt, lbaint_t start, pt->sys_ind = sys_ind;lba_to_chs (start, &pt->cyl, &pt->head, &pt->sector);lba_to_chs (start + size -1 , &pt->end_cyl, &pt->end_head, &pt->end_sector); -put_unaligned_le32 (relative, &pt->start4); -put_unaligned_le32 (size, &pt->size4); +put_unaligned_le32 (relative, &pt->start_sect); +put_unaligned_le32 (size, &pt->nr_sects); } int write_mbr_partitions(struct blk_desc *dev,
include/part_dos.h +3 -3
@@ -30,8 +30,8 @@ typedef struct dos_partition {unsigned char end_head;/* end head */ unsigned char end_sector;/* end sector */ unsigned char end_cyl;/* end cylinder */ -unsigned char start4[4 ];/* starting sector counting from 0 */ - unsigned char size4[4]; /* nr of sectors in partition */ -} dos_partition_t; +__le32 start_sect;/* starting sector counting from 0 */ + __le32 nr_sects; /* nr of sectors in partition */ +}__packed dos_partition_t;#endif /* _DISK_PART_DOS_H */
Signature · 1 line
2.52.0
Re: [PATCH 2/5] disk: part_dos: Align dos_partition_t with struct partition
Quoted 9 lines · Javier Martinez Canillas
The
dos_partition_tstruct defined inpart_dos.his nearly identical to the struct partition defined inpart_efi.h. They differ primarily in how define their starting sector and number of sectors fields.The former uses unsigned char arrays while the latter uses
__le32types. Using__le32is preferable, as it removes the ambiguity and potential misuse of a raw byte array. This also aligns the structure with how the Linux kernel defines it nowadays, which is the original source of it.
Quoted 5 lines
To prepare for future consolidation where one of the data structures can be removed, this change aligns both definitions and updates all accessors for
dos_partition_t.Signed-off-by Javier Martinez Canillas <[email protected]>
Signature · 1 line
Tom
PATCH 3/5 disk: part_efi: Remove redundant struct partition definition
In reply to Javier Martinez CanillasNow that dos_partition_t and struct partition are identical the duplicated data structure definition in the part_efi.h header can just be removed.
This results in a single, shared definition for MBR partition table entries, instead of having the same definition in two different places.
---
disk/part_efi.c | 4 ++-- include/part_efi.h | 19 +++---------------- 2 files changed, 5 insertions(+), 18 deletions(-)
disk/part_efi.c +2 -2
@@ -51,7 +51,7 @@ static inline u32 efi_crc32(const void *buf, u32 len)* Private function prototypes */ -static int pmbr_part_valid (struct partition *part); +static int pmbr_part_valid (dos_partition_t *part);static int is_pmbr_valid (legacy_mbr * mbr);static int is_gpt_valid (struct blk_desc *desc,u64 lba,gpt_header *pgpt_head,gpt_entry **pgpt_pte);
@@ -990,7 +990,7 @@ int write_mbr_and_gpt_partitions(struct blk_desc *desc, void *buf)* * Returns: 1 if EFI GPT partition type is found. */ -static int pmbr_part_valid (struct partition *part) +static int pmbr_part_valid (dos_partition_t *part) {if (part->sys_ind ==EFI_PMBR_OSTYPE_EFI_GPT &&get_unaligned_le32 (&part->start_sect) ==1UL ) {
include/part_efi.h +3 -16
@@ -18,6 +18,7 @@#define _DISK_PART_EFI_H#include <efi.h> +#include <part_dos.h> #define MSDOS_MBR_SIGNATURE 0xAA55#define MSDOS_MBR_BOOT_CODE_SIZE 440
@@ -77,20 +78,6 @@/* linux/include/efi.h */ typedef u16 efi_char16_t ; -/* based on linux/include/genhd.h */ -struct partition { -u8 boot_ind;/* 0x80 - active */ -u8 head;/* starting head */ -u8 sector;/* starting sector */ -u8 cyl;/* starting cylinder */ -u8 sys_ind;/* What partition type */ -u8 end_head;/* end head */ -u8 end_sector;/* end sector */ -u8 end_cyl;/* end cylinder */ -__le32 start_sect;/* starting sector counting from 0 */ -__le32 nr_sects;/* nr of sectors in partition */ -} __packed; -/* based on linux/fs/partitions/efi.h */ typedef struct _gpt_header { __le64 signature;
@@ -134,7 +121,7 @@ typedef struct _legacy_mbr {u8 boot_code[MSDOS_MBR_BOOT_CODE_SIZE ];__le32 unique_mbr_signature;__le16 unknown; -struct partition partition_record[4 ]; +dos_partition_t partition_record[4 ];__le16 signature; }__packed legacy_mbr;
@@ -153,7 +140,7 @@ struct efi_partition_info {u8 system;u8 reserved[7 ];union { -struct partition mbr; +dos_partition_t mbr;gpt_entry gpt; } info; } __packed;
Signature · 1 line
2.52.0
Re: [PATCH 3/5] disk: part_efi: Remove redundant struct partition definition
Quoted 7 lines · Javier Martinez Canillas
Now that
dos_partition_tand struct partition are identical the duplicated data structure definition in thepart_efi.hheader can just be removed.This results in a single, shared definition for MBR partition table entries, instead of having the same definition in two different places.
Signed-off-by Javier Martinez Canillas <[email protected]>
Signature · 1 line
Tom
PATCH 4/5 efi_loader: disk: Extend EFI_PARTITION_INFO_PROTOCOL to support MBR
In reply to Javier Martinez CanillasThe EFI_PARTITION_INFO_PROTOCOL provides detailed information about partitions. The UEFI specification mentions that both GPT and MBR partition schemes are supported, but the U-Boot implementation only supports the former.
This can cause compatibility issues for platforms whose boot ROM only supports MBR. This change adds support for MBR partition tables to the protocol, making U-Boot compatible with systems that require a legacy MBR table.
To implement this, the existing part_get_info_extended() function, which already traverses DOS partitions, is refactored to optionally retrieve the raw MBR partition record. This provides the necessary data for the EFI subsystem.
---
disk/part_dos.c | 63 ++++++++++++++++++++++++--------------- include/part.h | 14 +++++++++ lib/efi_loader/efi_disk.c | 9 ++++-- 3 files changed, 59 insertions(+), 27 deletions(-)
disk/part_dos.c +39 -24
@@ -201,7 +201,9 @@ static void print_partition_extended(struct blk_desc *desc,static int part_get_info_extended (struct blk_desc *desc,lbaint_t ext_part_sector,lbaint_t relative,int part_num,int which_part, -struct disk_partition *info,uint disksig) +struct disk_partition *info, +dos_partition_t *mbr, +uint disksig) { ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buffer, desc->blksz);struct disk_partition wdinfo = {0 };
@@ -232,9 +234,11 @@ static int part_get_info_extended(struct blk_desc *desc,if (CONFIG_IS_ENABLED (PARTITION_UUIDS ) && !ext_part_sector) disksig =get_unaligned_le32 (&buffer[DOS_PART_DISKSIG_OFFSET ]); - ret =part_get_info_whole_disk (desc, &wdinfo); -if (ret) -return ret; +if (info) { + ret =part_get_info_whole_disk (desc, &wdinfo); +if (ret) +return ret; + }/* Print all primary/logical partitions */ pt = (dos_partition_t *) (buffer +DOS_PART_TBL_OFFSET );
@@ -247,25 +251,29 @@ static int part_get_info_extended(struct blk_desc *desc, (pt->sys_ind != 0) && (part_num == which_part) && (ext_part_sector == 0 || is_extended(pt->sys_ind) == 0)) { -if (wdinfo.blksz >DOS_PART_DEFAULT_SECTOR ) - info->blksz = wdinfo.blksz; -else - info->blksz =DOS_PART_DEFAULT_SECTOR ; - info->start = (lbaint_t)(ext_part_sector + -get_unaligned_le32 (&pt->start_sect)); - info->size = (lbaint_t )get_unaligned_le32 (&pt->nr_sects); -part_set_generic_name (desc, part_num, - (char *)info->name); -/* sprintf(info->type, "%d, pt->sys_ind); */ -strcpy ((char *)info->type,"U-Boot" ); - info->bootable =get_bootable (pt); -if (CONFIG_IS_ENABLED (PARTITION_UUIDS )) { -char str[12 ]; - -sprintf (str,"%08x-%02x" , disksig, part_num); -disk_partition_set_uuid (info, str); +if (info) { +if (wdinfo.blksz >DOS_PART_DEFAULT_SECTOR ) + info->blksz = wdinfo.blksz; +else + info->blksz =DOS_PART_DEFAULT_SECTOR ; + info->start = (lbaint_t)(ext_part_sector + +get_unaligned_le32 (&pt->start_sect)); + info->size = (lbaint_t )get_unaligned_le32 (&pt->nr_sects); +part_set_generic_name (desc, part_num, + (char *)info->name); +/* sprintf(info->type, "%d, pt->sys_ind); */ +strcpy ((char *)info->type,"U-Boot" ); + info->bootable =get_bootable (pt); +if (CONFIG_IS_ENABLED (PARTITION_UUIDS )) { +char str[12 ]; + +sprintf (str,"%08x-%02x" , disksig, part_num); +disk_partition_set_uuid (info, str); + } + info->sys_ind = pt->sys_ind; } - info->sys_ind = pt->sys_ind; +if (mbr) +memcpy (mbr, pt,sizeof (*mbr));return 0 ; }
@@ -285,7 +293,8 @@ static int part_get_info_extended(struct blk_desc *desc,return part_get_info_extended (desc, lba_start, ext_part_sector ==0 ? lba_start : relative, - part_num, which_part, info, disksig); + part_num, which_part, info, + mbr, disksig); } }
@@ -317,7 +326,13 @@ static void __maybe_unused part_print_dos(struct blk_desc *desc)static int __maybe_unused part_get_info_dos (struct blk_desc *desc,int part,struct disk_partition *info) { -return part_get_info_extended (desc,0 ,0 ,1 , part, info,0 ); +return part_get_info_extended (desc,0 ,0 ,1 , part, info,NULL ,0 ); +} + +int __maybe_unused part_get_mbr (struct blk_desc *desc,int part, +dos_partition_t *mbr) +{ +return part_get_info_extended (desc,0 ,0 ,1 , part,NULL , mbr,0 ); }int is_valid_dos_buf (void *buf)
include/part.h +14 -0
@@ -704,6 +704,20 @@ int write_mbr_partitions(struct blk_desc *dev,int layout_mbr_partitions (struct disk_partition *p,int count,lbaint_t total_sectors); +/** +* part_get_mbr() - Get the MBR partition record of a partition +* +* This function reads the MBR partition record for a given block +* device and partition number. +* +* @desc: block device descriptor +* @part: partition number for which to return the partition record +* @mbr: MBR partition record +* +* Return: 0 on success, otherwise error +*/ +int part_get_mbr (struct blk_desc *desc,int part,dos_partition_t *mbr); +#endif #if CONFIG_IS_ENABLED (PARTITIONS )
lib/efi_loader/efi_disk.c +6 -3
@@ -475,9 +475,12 @@ static efi_status_t efi_disk_add_dev(#if CONFIG_IS_ENABLED (DOS_PARTITION )case PART_TYPE_DOS : info->type =PARTITION_TYPE_MBR ; - -/* TODO: implement support for MBR partition types */ -log_debug ("EFI_PARTITION_INFO_PROTOCOL doesn't support MBR\n" ); + ret =part_get_mbr (desc, part, &info->info.mbr); +if (ret) { +log_debug ("get MBR for part %d failed %ld\n" , + part, ret); + goto error; + }break ;#endif default :
Signature · 1 line
2.52.0
Re: [PATCH 4/5] efi_loader: disk: Extend EFI_PARTITION_INFO_PROTOCOL to support MBR
disk/part_dos.c static void print_partition_extended(struct blk_desc *desc,
Quoted 28 lines · Javier Martinez Canillas
The
EFI_PARTITION_INFO_PROTOCOLprovides detailed information about partitions. The UEFI specification mentions that both GPT and MBR partition schemes are supported, but the U-Boot implementation only supports the former.This can cause compatibility issues for platforms whose boot ROM only supports MBR. This change adds support for MBR partition tables to the protocol, making U-Boot compatible with systems that require a legacy MBR table.
To implement this, the existing
part_get_info_extended()function, which already traverses DOS partitions, is refactored to optionally retrieve the raw MBR partition record. This provides the necessary data for the EFI subsystem.Signed-off-by Javier Martinez Canillas <[email protected]>---
disk/part_dos.c | 63 ++++++++++++++++++++++++--------------- include/part.h | 14 +++++++++ lib/efi_loader/efi_disk.c | 9 ++++-- 3 files changed, 59 insertions(+), 27 deletions(-)disk/part_dos.c +0
-0@@ -201,7 +201,9 @@ static void print_partition_extended(struct blk_desc *desc,
Please add a Sphinx style function description describing the usage of the parameters.
Quoted 112 lines
disk/part_dos.c +39
-24static int part_get_info_extended (struct blk_desc *desc,lbaint_t ext_part_sector,lbaint_t relative,int part_num,int which_part, -struct disk_partition *info,uint disksig) +struct disk_partition *info, +dos_partition_t *mbr, +uint disksig) { ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buffer, desc->blksz);struct disk_partition wdinfo = {0 };@@ -232,9 +234,11 @@ static int part_get_info_extended(struct blk_desc *desc,if (CONFIG_IS_ENABLED (PARTITION_UUIDS ) && !ext_part_sector) disksig =get_unaligned_le32 (&buffer[DOS_PART_DISKSIG_OFFSET ]); - ret =part_get_info_whole_disk (desc, &wdinfo); -if (ret) -return ret; +if (info) { + ret =part_get_info_whole_disk (desc, &wdinfo); +if (ret) +return ret; + }/* Print all primary/logical partitions */ pt = (dos_partition_t *) (buffer +DOS_PART_TBL_OFFSET );@@ -247,25 +251,29 @@ static int part_get_info_extended(struct blk_desc *desc, (pt->sys_ind != 0) && (part_num == which_part) && (ext_part_sector == 0 || is_extended(pt->sys_ind) == 0)) { -if (wdinfo.blksz >DOS_PART_DEFAULT_SECTOR ) - info->blksz = wdinfo.blksz; -else - info->blksz =DOS_PART_DEFAULT_SECTOR ; - info->start = (lbaint_t)(ext_part_sector + -get_unaligned_le32 (&pt->start_sect)); - info->size = (lbaint_t )get_unaligned_le32 (&pt->nr_sects); -part_set_generic_name (desc, part_num, - (char *)info->name); -/* sprintf(info->type, "%d, pt->sys_ind); */ -strcpy ((char *)info->type,"U-Boot" ); - info->bootable =get_bootable (pt); -if (CONFIG_IS_ENABLED (PARTITION_UUIDS )) { -char str[12 ]; - -sprintf (str,"%08x-%02x" , disksig, part_num); -disk_partition_set_uuid (info, str); +if (info) { +if (wdinfo.blksz >DOS_PART_DEFAULT_SECTOR ) + info->blksz = wdinfo.blksz; +else + info->blksz =DOS_PART_DEFAULT_SECTOR ; + info->start = (lbaint_t)(ext_part_sector + +get_unaligned_le32 (&pt->start_sect)); + info->size = (lbaint_t )get_unaligned_le32 (&pt->nr_sects); +part_set_generic_name (desc, part_num, + (char *)info->name); +/* sprintf(info->type, "%d, pt->sys_ind); */ +strcpy ((char *)info->type,"U-Boot" ); + info->bootable =get_bootable (pt); +if (CONFIG_IS_ENABLED (PARTITION_UUIDS )) { +char str[12 ]; + +sprintf (str,"%08x-%02x" , disksig, part_num); +disk_partition_set_uuid (info, str); + } + info->sys_ind = pt->sys_ind; } - info->sys_ind = pt->sys_ind; +if (mbr) +memcpy (mbr, pt,sizeof (*mbr));return 0 ; }@@ -285,7 +293,8 @@ static int part_get_info_extended(struct blk_desc *desc,return part_get_info_extended (desc, lba_start, ext_part_sector ==0 ? lba_start : relative, - part_num, which_part, info, disksig); + part_num, which_part, info, + mbr, disksig); } }@@ -317,7 +326,13 @@ static void __maybe_unused part_print_dos(struct blk_desc *desc)static int __maybe_unused part_get_info_dos (struct blk_desc *desc,int part,struct disk_partition *info) { -return part_get_info_extended (desc,0 ,0 ,1 , part, info,0 ); +return part_get_info_extended (desc,0 ,0 ,1 , part, info,NULL ,0 ); +} + +int __maybe_unused part_get_mbr (struct blk_desc *desc,int part, +dos_partition_t *mbr) +{ +return part_get_info_extended (desc,0 ,0 ,1 , part,NULL , mbr,0 ); }int is_valid_dos_buf (void *buf)include/part.h +6
-0@@ -704,6 +704,20 @@ int write_mbr_partitions(struct blk_desc *dev,int layout_mbr_partitions (struct disk_partition *p,int count,lbaint_t total_sectors); +/** +* part_get_mbr() - Get the MBR partition record of a partition +* +* This function reads the MBR partition record for a given block +* device and partition number. +*
include/part.h int write_mbr_partitions(struct blk_desc *dev, · line 722
Quoted 10 lines
include/part.h +8
-0+* @desc: block device descriptor +* @part: partition number for which to return the partition record +* @mbr: MBR partition record +* +* Return: 0 on success, otherwise error +*/ +int part_get_mbr (struct blk_desc *desc,int part,dos_partition_t *mbr); +#endif
Please, put the partition library changes into one patch and the EFI changes into another.
Best regards
Heinrich
Quoted 21 lines
include/part.h +0
-0#if CONFIG_IS_ENABLED (PARTITIONS )lib/efi_loader/efi_disk.c +6
-3@@ -475,9 +475,12 @@ static efi_status_t efi_disk_add_dev(#if CONFIG_IS_ENABLED (DOS_PARTITION )case PART_TYPE_DOS : info->type =PARTITION_TYPE_MBR ; - -/* TODO: implement support for MBR partition types */ -log_debug ("EFI_PARTITION_INFO_PROTOCOL doesn't support MBR\n" ); + ret =part_get_mbr (desc, part, &info->info.mbr); +if (ret) { +log_debug ("get MBR for part %d failed %ld\n" , + part, ret); + goto error; + }break ;#endif default :
Re: [PATCH 4/5] efi_loader: disk: Extend EFI_PARTITION_INFO_PROTOCOL to support MBR
Heinrich Schuchardt <[email protected]> writes:
Hello Heinrich,
Thanks for your feedback.
Quoted 24 lines · Javier Martinez Canillas
Quoted 23 lines
The
EFI_PARTITION_INFO_PROTOCOLprovides detailed information about partitions. The UEFI specification mentions that both GPT and MBR partition schemes are supported, but the U-Boot implementation only supports the former.This can cause compatibility issues for platforms whose boot ROM only supports MBR. This change adds support for MBR partition tables to the protocol, making U-Boot compatible with systems that require a legacy MBR table.
To implement this, the existing
part_get_info_extended()function, which already traverses DOS partitions, is refactored to optionally retrieve the raw MBR partition record. This provides the necessary data for the EFI subsystem.Signed-off-by Javier Martinez Canillas <[email protected]>---
disk/part_dos.c | 63 ++++++++++++++++++++++++--------------- include/part.h | 14 +++++++++ lib/efi_loader/efi_disk.c | 9 ++++-- 3 files changed, 59 insertions(+), 27 deletions(-)
Quoted 9 lines
disk/part_dos.c static void print_partition_extended(struct blk_desc *desc,
Quoted 5 lines
disk/part_dos.c +0
-0@@ -201,7 +201,9 @@ static void print_partition_extended(struct blk_desc *desc,Please add a Sphinx style function description describing the usage of the parameters.
Sure, I didn't add for the new parameter since the function didn't have a description, but I'll add a preparatory patch in v2 to add that.
[...]
Quoted 11 lines
Quoted 11 lines
disk/part_dos.c +11
-0+/** +* part_get_mbr() - Get the MBR partition record of a partition +* +* This function reads the MBR partition record for a given block +* device and partition number. +* +* @desc: block device descriptor +* @part: partition number for which to return the partition record +* @mbr: MBR partition record +* +* Return: 0 on success, otherwise error
Quoted 9 lines
disk/part_dos.c
Quoted 5 lines
+ */
disk/part_dos.c +2
-0+int part_get_mbr (struct blk_desc *desc,int part,dos_partition_t *mbr); +#endif Please, put the partition library changes into one patch and the EFI changes into another.
Ok, I'll split these in v2.
Quoted 4 lines
Best regards
Heinrich
Signature · 5 lines
Best regards, Javier Martinez Canillas Core Platforms Red Hat
Re: [PATCH 4/5] efi_loader: disk: Extend EFI_PARTITION_INFO_PROTOCOL to support MBR
In reply to Javier Martinez CanillasQuoted 9 lines · Javier Martinez Canillas
The
EFI_PARTITION_INFO_PROTOCOLprovides detailed information about partitions. The UEFI specification mentions that both GPT and MBR partition schemes are supported, but the U-Boot implementation only supports the former.This can cause compatibility issues for platforms whose boot ROM only supports MBR. This change adds support for MBR partition tables to the protocol, making U-Boot compatible with systems that require a legacy MBR table.
Normally, this is simple to address via hybrid partition tables. I've done that already for two different SoCs (TI AM62 and Altera Cyclone V), and this allows to use all the nifty features of the modern GPT without upsetting the ROM loaders. Do you have a SoC where this does not work?
That said, adding this feature may still be valuable.
Jan
Signature · 2 lines
Siemens AG, Foundational Technologies Linux Expert Center
Re: [PATCH 4/5] efi_loader: disk: Extend EFI_PARTITION_INFO_PROTOCOL to support MBR
Jan Kiszka <[email protected]> writes:
Hello Jan,
Quoted 11 lines · Javier Martinez Canillas
Quoted 9 lines
The
EFI_PARTITION_INFO_PROTOCOLprovides detailed information about partitions. The UEFI specification mentions that both GPT and MBR partition schemes are supported, but the U-Boot implementation only supports the former.This can cause compatibility issues for platforms whose boot ROM only supports MBR. This change adds support for MBR partition tables to the protocol, making U-Boot compatible with systems that require a legacy MBR table.
Quoted 5 lines
Normally, this is simple to address via hybrid partition tables. I've done that already for two different SoCs (TI AM62 and Altera Cyclone V), and this allows to use all the nifty features of the modern GPT without upsetting the ROM loaders. Do you have a SoC where this does not work?
Yes, I know that could be worked around by using hybrid partition tables but IMO using that could be fragile.
Quoted 2 lines
That said, adding this feature may still be valuable.
Indeed and as mentioned in the commit message it is something supported by the EFI partition info protocol according to the spec, so it makes sense for U-boot to also implement support for MBR.
Quoted 6 lines
Jan
Signature · 2 lines
Siemens AG, Foundational Technologies Linux Expert Center
Signature · 5 lines
Best regards, Javier Martinez Canillas Core Platforms Red Hat
Re: [PATCH 4/5] efi_loader: disk: Extend EFI_PARTITION_INFO_PROTOCOL to support MBR
Quoted 15 lines · Javier Martinez Canillas
Jan Kiszka <[email protected]> writes:
Hello Jan,
Quoted 11 lines · Javier Martinez Canillas
Quoted 9 lines
The
EFI_PARTITION_INFO_PROTOCOLprovides detailed information about partitions. The UEFI specification mentions that both GPT and MBR partition schemes are supported, but the U-Boot implementation only supports the former.This can cause compatibility issues for platforms whose boot ROM only supports MBR. This change adds support for MBR partition tables to the protocol, making U-Boot compatible with systems that require a legacy MBR table.
Quoted 8 lines
Quoted 5 lines
Normally, this is simple to address via hybrid partition tables. I've done that already for two different SoCs (TI AM62 and Altera Cyclone V), and this allows to use all the nifty features of the modern GPT without upsetting the ROM loaders. Do you have a SoC where this does not work?
Yes, I know that could be worked around by using hybrid partition tables but IMO using that could be fragile.
Try it, it's not in my experience. Again, you gain modern GPT partitions this way, for anything but the boot partition the ROM loader needs.
Jan
Signature · 2 lines
Siemens AG, Foundational Technologies Linux Expert Center
PATCH 5/5 efi_selftest: Enhance MBR test for PARTITION_INFO_PROTOCOL
In reply to Javier Martinez CanillasThe EFI_PARTITION_INFO_PROTOCOL test was added before the protocol fully supported MBR partitions. As a result, it lacked specific checks for the content of the raw MBR partition record.
Now that MBR support has been implemented, enhance the selftest to provide coverage for the MBR entries too.
This verifies that the protocol correctly reads and exposes MBR partition records and prevents this functionality to regress due future changes.
---
lib/efi_selftest/efi_selftest_block_device.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
lib/efi_selftest/efi_selftest_block_device.c +12 -0
@@ -404,6 +404,18 @@ static int execute(void) part_info->system);return EFI_ST_FAILURE ; } +/* The first partition starts at LBA 1 on the test image */ +if (part_info->info.mbr.start_sect !=1 ) { +efi_st_error ("MBR start sector %d, expected 1\n" , + part_info->info.mbr.start_sect); +return EFI_ST_FAILURE ; + } +/* The partition type is FAT12 (0x01) in the test image */ +if (part_info->info.mbr.sys_ind !=0x01 ) { +efi_st_error ("MBR system indicator %d, expected 1\n" , + part_info->info.mbr.sys_ind); +return EFI_ST_FAILURE ; + }/* Open the simple file system protocol */ ret = boottime->open_protocol(handle_partition,
Signature · 1 line
2.52.0
Re: [PATCH 5/5] efi_selftest: Enhance MBR test for PARTITION_INFO_PROTOCOL
Quoted 26 lines · Javier Martinez Canillas
The
EFI_PARTITION_INFO_PROTOCOLtest was added before the protocol fully supported MBR partitions. As a result, it lacked specific checks for the content of the raw MBR partition record.Now that MBR support has been implemented, enhance the selftest to provide coverage for the MBR entries too.
This verifies that the protocol correctly reads and exposes MBR partition records and prevents this functionality to regress due future changes.
Signed-off-by Javier Martinez Canillas <[email protected]>---
lib/efi_selftest/efi_selftest_block_device.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)lib/efi_selftest/efi_selftest_block_device.c +2
-0@@ -404,6 +404,18 @@ static int execute(void) part_info->system);return EFI_ST_FAILURE ; } +/* The first partition starts at LBA 1 on the test image */ +if (part_info->info.mbr.start_sect !=1 ) {
lib/efi_selftest/efi_selftest_block_device.c static int execute(void) · line 418
Quoted 10 lines
lib/efi_selftest/efi_selftest_block_device.c +10
-0+efi_st_error ("MBR start sector %d, expected 1\n" , + part_info->info.mbr.start_sect); +return EFI_ST_FAILURE ; + } +/* The partition type is FAT12 (0x01) in the test image */ +if (part_info->info.mbr.sys_ind !=0x01 ) { +efi_st_error ("MBR system indicator %d, expected 1\n" , + part_info->info.mbr.sys_ind); +return EFI_ST_FAILURE ; + }
How about defining a static variable with all fields and using memcmp() to check them all?
Best regards
Heinrich
Quoted 3 lines
lib/efi_selftest/efi_selftest_block_device.c +0
-0/* Open the simple file system protocol */ ret = boottime->open_protocol(handle_partition,
Re: [PATCH 5/5] efi_selftest: Enhance MBR test for PARTITION_INFO_PROTOCOL
Quoted 32 lines · Heinrich Schuchardt
Quoted 31 lines · Javier Martinez Canillas
The
EFI_PARTITION_INFO_PROTOCOLtest was added before the protocol fully supported MBR partitions. As a result, it lacked specific checks for the content of the raw MBR partition record.Now that MBR support has been implemented, enhance the selftest to provide coverage for the MBR entries too.
This verifies that the protocol correctly reads and exposes MBR partition records and prevents this functionality to regress due future changes.
Signed-off-by Javier Martinez Canillas <[email protected]>---
lib/efi_selftest/efi_selftest_block_device.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)lib/efi_selftest/efi_selftest_block_device.c +7
-0@@ -404,6 +404,18 @@ static int execute(void) part_info->system);return EFI_ST_FAILURE ; } +/* The first partition starts at LBA 1 on the test image */ +if (part_info->info.mbr.start_sect !=1 ) { +efi_st_error ("MBR start sector %d, expected 1\n" , + part_info->info.mbr.start_sect); +return EFI_ST_FAILURE ; + } +/* The partition type is FAT12 (0x01) in the test image */
Quoted 9 lines
lib/efi_selftest/efi_selftest_block_device.c static int execute(void) · line 418
Quoted 5 lines
lib/efi_selftest/efi_selftest_block_device.c +5
-0+if (part_info->info.mbr.sys_ind !=0x01 ) { +efi_st_error ("MBR system indicator %d, expected 1\n" , + part_info->info.mbr.sys_ind); +return EFI_ST_FAILURE ; + }How about defining a static variable with all fields and using
memcmp()to check them all?
Makes sense. I'll do that in v2 as well. Thanks!
Quoted 4 lines
Best regards
Heinrich
Signature · 5 lines
Best regards, Javier Martinez Canillas Core Platforms Red Hat