PCI: dwc: Code clean up and formatting improvements
Subsystems (5)
cover PCI: dwc: Code clean up and formatting improvements
This series contains two cleanup patches for the PCI DWC subsystem that improve code readability and maintainability without any functional changes.
The first patch addresses a naming issue where the "has_msi_ctrl" flag name was misleading. The flag specifically indicates when a platform uses the iMSI-RX module for MSI handling, rather than having any generic MSI controller. Renaming it to "uses_imsi_rx" makes the code's intent much clearer.
The second patch fixes a grammatical error and improves code formatting.
---
Qiang Yu (2):
PCI: dwc: Fix grammar and formatting in dw_pcie_remove_ext_capability()
PCI: dwc: Rename has_msi_ctrl to uses_imsi_rx for clarity
drivers/pci/controller/dwc/pcie-designware-host.c | 16 ++++++++-------- drivers/pci/controller/dwc/pcie-designware.c | 3 ++- drivers/pci/controller/dwc/pcie-designware.h | 2 +- drivers/pci/controller/dwc/pcie-qcom.c | 4 ++-- 4 files changed, 13 insertions(+), 12 deletions(-)
---
base-commit: 86291f774fe8524178446cb2c792939640b4970c
change-id: 20260121-remove_cap_clean_up-970b60cf595a
Best regards,
Signature · 1 line
Qiang Yu <[email protected]>
PATCH 1/2 PCI: dwc: Fix grammar and formatting in dw_pcie_remove_ext_capability()
Fix a grammatical error in the comment by changing "it's" to "its". Also add a blank line after the variable declaration for better code formatting.
--- drivers/pci/controller/dwc/pcie-designware.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/pci/controller/dwc/pcie-designware.c +2 -1
@@ -268,9 +268,10 @@ void dw_pcie_remove_ext_capability(struct dw_pcie *pci, u8 cap)return ; header =dw_pcie_readl_dbi (pci, cap_pos); +/* * If the first cap at offset PCI_CFG_SPACE_SIZE is removed, -* only set it's capid to zero as it cannot be skipped. +* only set its capid to zero as it cannot be skipped. */ if (cap_pos ==PCI_CFG_SPACE_SIZE ) {dw_pcie_dbi_ro_wr_en (pci);
Signature · 1 line
2.34.1
Re: [PATCH 1/2] PCI: dwc: Fix grammar and formatting in dw_pcie_remove_ext_capability()
Quoted 4 lines · Qiang Yu
Fix a grammatical error in the comment by changing "it's" to "its". Also add a blank line after the variable declaration for better code formatting.
Quoted 22 lines
Signed-off-by Qiang Yu <[email protected]>--- drivers/pci/controller/dwc/pcie-designware.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)drivers/pci/controller/dwc/pcie-designware.c +2
-1@@ -268,9 +268,10 @@ void dw_pcie_remove_ext_capability(struct dw_pcie *pci, u8 cap)return ; header =dw_pcie_readl_dbi (pci, cap_pos); +/* * If the first cap at offset PCI_CFG_SPACE_SIZE is removed, -* only set it's capid to zero as it cannot be skipped. +* only set its capid to zero as it cannot be skipped. */ if (cap_pos ==PCI_CFG_SPACE_SIZE ) {dw_pcie_dbi_ro_wr_en (pci);
PATCH 2/2 PCI: dwc: Rename has_msi_ctrl to uses_imsi_rx for clarity
In reply to Qiang YuThe current "has_msi_ctrl" flag name is misleading because it suggests the presence of any MSI controller, while it is specifically set for platforms that lack .msi_init() callback and don't have "msi-parent" or "msi-map" device tree properties, indicating they rely on the iMSI-RX module for MSI functionality.
Rename it to "uses_imsi_rx" to make the intent clear:
- When true: Platform uses the iMSI-RX module for MSI handling
- When false: Platform has other MSI controller support (ITS/MBI, custom handlers)
No functional changes, only improves code readability and eliminates naming confusion.
--- drivers/pci/controller/dwc/pcie-designware-host.c | 16 ++++++++-------- drivers/pci/controller/dwc/pcie-designware.h | 2 +- drivers/pci/controller/dwc/pcie-qcom.c | 4 ++-- 3 files changed, 11 insertions(+), 11 deletions(-)
drivers/pci/controller/dwc/pcie-designware-host.c +8 -8
@@ -255,7 +255,7 @@ void dw_pcie_msi_init(struct dw_pcie_rp *pp)u64 msi_target = (u64 )pp->msi_data;u32 ctrl, num_ctrls; -if (!pci_msi_enabled () || !pp->has_msi_ctrl) +if (!pci_msi_enabled () || !pp->uses_imsi_rx)return ; num_ctrls = pp->num_vectors /MAX_MSI_IRQS_PER_CTRL ;
@@ -603,15 +603,15 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp) }if (pci_msi_enabled ()) { - pp->has_msi_ctrl = !(pp->ops->msi_init || + pp->uses_imsi_rx = !(pp->ops->msi_init ||of_property_present (np,"msi-parent" ) ||of_property_present (np,"msi-map" ));/* -* For the has_msi_ctrl case the default assignment is handled +* For the uses_imsi_rx case the default assignment is handled * in the dw_pcie_msi_host_init(). */ -if (!pp->has_msi_ctrl && !pp->num_vectors) { +if (!pp->uses_imsi_rx && !pp->num_vectors) { pp->num_vectors =MSI_DEF_NUM_VECTORS ; }else if (pp->num_vectors >MAX_MSI_IRQS ) {dev_err (dev,"Invalid number of vectors\n" );
@@ -623,7 +623,7 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp) ret = pp->ops->msi_init (pp);if (ret <0 ) goto err_deinit_host; - }else if (pp->has_msi_ctrl) { + }else if (pp->uses_imsi_rx) { ret =dw_pcie_msi_host_init (pp);if (ret <0 ) goto err_deinit_host;
@@ -701,7 +701,7 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)dw_pcie_edma_remove (pci); err_free_msi: -if (pp->has_msi_ctrl) +if (pp->uses_imsi_rx)dw_pcie_free_msi (pp); err_deinit_host:
@@ -729,7 +729,7 @@ void dw_pcie_host_deinit(struct dw_pcie_rp *pp)dw_pcie_edma_remove (pci); -if (pp->has_msi_ctrl) +if (pp->uses_imsi_rx)dw_pcie_free_msi (pp);if (pp->ops->deinit)
@@ -1130,7 +1130,7 @@ int dw_pcie_setup_rc(struct dw_pcie_rp *pp)* the MSI and MSI-X capabilities of the Root Port to allow the drivers * to fall back to INTx instead. */ -if (pp->has_msi_ctrl) { +if (pp->uses_imsi_rx) {dw_pcie_remove_capability (pci,PCI_CAP_ID_MSI );dw_pcie_remove_capability (pci,PCI_CAP_ID_MSIX ); }
drivers/pci/controller/dwc/pcie-designware.h +1 -1
@@ -416,7 +416,7 @@ struct dw_pcie_host_ops { };struct dw_pcie_rp { -bool has_msi_ctrl:1 ; +bool uses_imsi_rx:1 ;bool cfg0_io_shared:1 ;u64 cfg0_base;void __iomem *va_cfg0_base;
drivers/pci/controller/dwc/pcie-qcom.c +2 -2
@@ -1633,7 +1633,7 @@ static void qcom_pci_free_msi(void *ptr) {struct dw_pcie_rp *pp = (struct dw_pcie_rp *)ptr; -if (pp && pp->has_msi_ctrl) +if (pp && pp->uses_imsi_rx)dw_pcie_free_msi (pp); }
@@ -1657,7 +1657,7 @@ static int qcom_pcie_ecam_host_init(struct pci_config_window *cfg)if (ret)return ret; - pp->has_msi_ctrl = true; + pp->uses_imsi_rx = true;dw_pcie_msi_init (pp);return devm_add_action_or_reset (dev, qcom_pci_free_msi, pp);
Signature · 1 line
2.34.1
Re: [PATCH 2/2] PCI: dwc: Rename has_msi_ctrl to uses_imsi_rx for clarity
Hi Qiang,
Quoted 6 lines · Qiang Yu
The current "
has_msi_ctrl" flag name is misleading because it suggests the presence of any MSI controller, while it is specifically set for platforms that lack .msi_init() callback and don't have "msi-parent" or "msi-map" device tree properties, indicating they rely on the iMSI-RX module for MSI functionality.
Quoted 8 lines
Rename it to "
uses_imsi_rx" to make the intent clear:
- When true: Platform uses the iMSI-RX module for MSI handling
- When false: Platform has other MSI controller support (ITS/MBI, custom handlers)No functional changes, only improves code readability and eliminates naming confusion.
I love this patch, it's indeed confusing. But I noticed the naming seems inconsistency, for instance, there are already use_atu_msg, use_parent_dt_ranges, etc. Should we use use_imsi_rx instead?
But in any case,
Quoted 111 lines
Signed-off-by Qiang Yu <[email protected]>--- drivers/pci/controller/dwc/pcie-designware-host.c | 16 ++++++++-------- drivers/pci/controller/dwc/pcie-designware.h | 2 +- drivers/pci/controller/dwc/pcie-qcom.c | 4 ++-- 3 files changed, 11 insertions(+), 11 deletions(-)drivers/pci/controller/dwc/pcie-designware-host.c +8
-8@@ -255,7 +255,7 @@ void dw_pcie_msi_init(struct dw_pcie_rp *pp)u64 msi_target = (u64 )pp->msi_data;u32 ctrl, num_ctrls; -if (!pci_msi_enabled () || !pp->has_msi_ctrl) +if (!pci_msi_enabled () || !pp->uses_imsi_rx)return ; num_ctrls = pp->num_vectors /MAX_MSI_IRQS_PER_CTRL ;@@ -603,15 +603,15 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp) }if (pci_msi_enabled ()) { - pp->has_msi_ctrl = !(pp->ops->msi_init || + pp->uses_imsi_rx = !(pp->ops->msi_init ||of_property_present (np,"msi-parent" ) ||of_property_present (np,"msi-map" ));/* -* For the has_msi_ctrl case the default assignment is handled +* For the uses_imsi_rx case the default assignment is handled * in the dw_pcie_msi_host_init(). */ -if (!pp->has_msi_ctrl && !pp->num_vectors) { +if (!pp->uses_imsi_rx && !pp->num_vectors) { pp->num_vectors =MSI_DEF_NUM_VECTORS ; }else if (pp->num_vectors >MAX_MSI_IRQS ) {dev_err (dev,"Invalid number of vectors\n" );@@ -623,7 +623,7 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp) ret = pp->ops->msi_init (pp);if (ret <0 ) goto err_deinit_host; - }else if (pp->has_msi_ctrl) { + }else if (pp->uses_imsi_rx) { ret =dw_pcie_msi_host_init (pp);if (ret <0 ) goto err_deinit_host;@@ -701,7 +701,7 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)dw_pcie_edma_remove (pci); err_free_msi: -if (pp->has_msi_ctrl) +if (pp->uses_imsi_rx)dw_pcie_free_msi (pp); err_deinit_host:@@ -729,7 +729,7 @@ void dw_pcie_host_deinit(struct dw_pcie_rp *pp)dw_pcie_edma_remove (pci); -if (pp->has_msi_ctrl) +if (pp->uses_imsi_rx)dw_pcie_free_msi (pp);if (pp->ops->deinit)@@ -1130,7 +1130,7 @@ int dw_pcie_setup_rc(struct dw_pcie_rp *pp)* the MSI and MSI-X capabilities of the Root Port to allow the drivers * to fall back to INTx instead. */ -if (pp->has_msi_ctrl) { +if (pp->uses_imsi_rx) {dw_pcie_remove_capability (pci,PCI_CAP_ID_MSI );dw_pcie_remove_capability (pci,PCI_CAP_ID_MSIX ); }drivers/pci/controller/dwc/pcie-designware.h +1
-1@@ -416,7 +416,7 @@ struct dw_pcie_host_ops { };struct dw_pcie_rp { -bool has_msi_ctrl:1 ; +bool uses_imsi_rx:1 ;bool cfg0_io_shared:1 ;u64 cfg0_base;void __iomem *va_cfg0_base;drivers/pci/controller/dwc/pcie-qcom.c +2
-2@@ -1633,7 +1633,7 @@ static void qcom_pci_free_msi(void *ptr) {struct dw_pcie_rp *pp = (struct dw_pcie_rp *)ptr; -if (pp && pp->has_msi_ctrl) +if (pp && pp->uses_imsi_rx)dw_pcie_free_msi (pp); }@@ -1657,7 +1657,7 @@ static int qcom_pcie_ecam_host_init(struct pci_config_window *cfg)if (ret)return ret; - pp->has_msi_ctrl = true; + pp->uses_imsi_rx = true;dw_pcie_msi_init (pp);return devm_add_action_or_reset (dev, qcom_pci_free_msi, pp);
Re: [PATCH 2/2] PCI: dwc: Rename has_msi_ctrl to uses_imsi_rx for clarity
Quoted 14 lines · Shawn Lin
Hi Qiang,
Quoted 11 lines · Qiang Yu
The current "
has_msi_ctrl" flag name is misleading because it suggests the presence of any MSI controller, while it is specifically set for platforms that lack .msi_init() callback and don't have "msi-parent" or "msi-map" device tree properties, indicating they rely on the iMSI-RX module for MSI functionality.Rename it to "
uses_imsi_rx" to make the intent clear:
- When true: Platform uses the iMSI-RX module for MSI handling
- When false: Platform has other MSI controller support (ITS/MBI, custom handlers)
Quoted 7 lines
Quoted 3 lines
No functional changes, only improves code readability and eliminates naming confusion.
I love this patch, it's indeed confusing. But I noticed the naming seems inconsistency, for instance, there are already
use_atu_msg,use_parent_dt_ranges, etc. Should we useuse_imsi_rxinstead?
Thank you. You are right. Use_imsi_rx is more consistency.
- Qiang Yu
Quoted 102 lines
But in any case,
Reviewed-by Shawn Lin <[email protected]>Quoted 97 lines
Signed-off-by Qiang Yu <[email protected]>--- drivers/pci/controller/dwc/pcie-designware-host.c | 16 ++++++++-------- drivers/pci/controller/dwc/pcie-designware.h | 2 +- drivers/pci/controller/dwc/pcie-qcom.c | 4 ++-- 3 files changed, 11 insertions(+), 11 deletions(-)drivers/pci/controller/dwc/pcie-designware-host.c +8
-8@@ -255,7 +255,7 @@ void dw_pcie_msi_init(struct dw_pcie_rp *pp)u64 msi_target = (u64 )pp->msi_data;u32 ctrl, num_ctrls; -if (!pci_msi_enabled () || !pp->has_msi_ctrl) +if (!pci_msi_enabled () || !pp->uses_imsi_rx)return ; num_ctrls = pp->num_vectors /MAX_MSI_IRQS_PER_CTRL ;@@ -603,15 +603,15 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp) }if (pci_msi_enabled ()) { - pp->has_msi_ctrl = !(pp->ops->msi_init || + pp->uses_imsi_rx = !(pp->ops->msi_init ||of_property_present (np,"msi-parent" ) ||of_property_present (np,"msi-map" ));/* -* For the has_msi_ctrl case the default assignment is handled +* For the uses_imsi_rx case the default assignment is handled * in the dw_pcie_msi_host_init(). */ -if (!pp->has_msi_ctrl && !pp->num_vectors) { +if (!pp->uses_imsi_rx && !pp->num_vectors) { pp->num_vectors =MSI_DEF_NUM_VECTORS ; }else if (pp->num_vectors >MAX_MSI_IRQS ) {dev_err (dev,"Invalid number of vectors\n" );@@ -623,7 +623,7 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp) ret = pp->ops->msi_init (pp);if (ret <0 ) goto err_deinit_host; - }else if (pp->has_msi_ctrl) { + }else if (pp->uses_imsi_rx) { ret =dw_pcie_msi_host_init (pp);if (ret <0 ) goto err_deinit_host;@@ -701,7 +701,7 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)dw_pcie_edma_remove (pci); err_free_msi: -if (pp->has_msi_ctrl) +if (pp->uses_imsi_rx)dw_pcie_free_msi (pp); err_deinit_host:@@ -729,7 +729,7 @@ void dw_pcie_host_deinit(struct dw_pcie_rp *pp)dw_pcie_edma_remove (pci); -if (pp->has_msi_ctrl) +if (pp->uses_imsi_rx)dw_pcie_free_msi (pp);if (pp->ops->deinit)@@ -1130,7 +1130,7 @@ int dw_pcie_setup_rc(struct dw_pcie_rp *pp)* the MSI and MSI-X capabilities of the Root Port to allow the drivers * to fall back to INTx instead. */ -if (pp->has_msi_ctrl) { +if (pp->uses_imsi_rx) {dw_pcie_remove_capability (pci,PCI_CAP_ID_MSI );dw_pcie_remove_capability (pci,PCI_CAP_ID_MSIX ); }drivers/pci/controller/dwc/pcie-designware.h +1
-1@@ -416,7 +416,7 @@ struct dw_pcie_host_ops { };struct dw_pcie_rp { -bool has_msi_ctrl:1 ; +bool uses_imsi_rx:1 ;bool cfg0_io_shared:1 ;u64 cfg0_base;void __iomem *va_cfg0_base;drivers/pci/controller/dwc/pcie-qcom.c +2
-2@@ -1633,7 +1633,7 @@ static void qcom_pci_free_msi(void *ptr) {struct dw_pcie_rp *pp = (struct dw_pcie_rp *)ptr; -if (pp && pp->has_msi_ctrl) +if (pp && pp->uses_imsi_rx)dw_pcie_free_msi (pp); }@@ -1657,7 +1657,7 @@ static int qcom_pcie_ecam_host_init(struct pci_config_window *cfg)if (ret)return ret; - pp->has_msi_ctrl = true; + pp->uses_imsi_rx = true;dw_pcie_msi_init (pp);return devm_add_action_or_reset (dev, qcom_pci_free_msi, pp);
Manivannan Sadhasivam
maintainerRe: [PATCH 2/2] PCI: dwc: Rename has_msi_ctrl to uses_imsi_rx for clarity
Quoted 19 lines · Qiang Yu
Quoted 18 lines · Shawn Lin
Hi Qiang,
Quoted 14 lines · Qiang Yu
The current "
has_msi_ctrl" flag name is misleading because it suggests the presence of any MSI controller, while it is specifically set for platforms that lack .msi_init() callback and don't have "msi-parent" or "msi-map" device tree properties, indicating they rely on the iMSI-RX module for MSI functionality.Rename it to "
uses_imsi_rx" to make the intent clear:
- When true: Platform uses the iMSI-RX module for MSI handling
- When false: Platform has other MSI controller support (ITS/MBI, custom handlers)No functional changes, only improves code readability and eliminates naming confusion.
Quoted 6 lines
Quoted 3 lines
I love this patch, it's indeed confusing. But I noticed the naming seems inconsistency, for instance, there are already
use_atu_msg,use_parent_dt_ranges, etc. Should we useuse_imsi_rxinstead?Thank you. You are right.
Use_imsi_rxis more consistency.
Ammended this change while applying, thanks Shawn!
- Mani
Quoted 103 lines
- Qiang Yu
Quoted 102 lines
But in any case,
Reviewed-by Shawn Lin <[email protected]>Quoted 97 lines
Signed-off-by Qiang Yu <[email protected]>--- drivers/pci/controller/dwc/pcie-designware-host.c | 16 ++++++++-------- drivers/pci/controller/dwc/pcie-designware.h | 2 +- drivers/pci/controller/dwc/pcie-qcom.c | 4 ++-- 3 files changed, 11 insertions(+), 11 deletions(-)drivers/pci/controller/dwc/pcie-designware-host.c +8
-8@@ -255,7 +255,7 @@ void dw_pcie_msi_init(struct dw_pcie_rp *pp)u64 msi_target = (u64 )pp->msi_data;u32 ctrl, num_ctrls; -if (!pci_msi_enabled () || !pp->has_msi_ctrl) +if (!pci_msi_enabled () || !pp->uses_imsi_rx)return ; num_ctrls = pp->num_vectors /MAX_MSI_IRQS_PER_CTRL ;@@ -603,15 +603,15 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp) }if (pci_msi_enabled ()) { - pp->has_msi_ctrl = !(pp->ops->msi_init || + pp->uses_imsi_rx = !(pp->ops->msi_init ||of_property_present (np,"msi-parent" ) ||of_property_present (np,"msi-map" ));/* -* For the has_msi_ctrl case the default assignment is handled +* For the uses_imsi_rx case the default assignment is handled * in the dw_pcie_msi_host_init(). */ -if (!pp->has_msi_ctrl && !pp->num_vectors) { +if (!pp->uses_imsi_rx && !pp->num_vectors) { pp->num_vectors =MSI_DEF_NUM_VECTORS ; }else if (pp->num_vectors >MAX_MSI_IRQS ) {dev_err (dev,"Invalid number of vectors\n" );@@ -623,7 +623,7 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp) ret = pp->ops->msi_init (pp);if (ret <0 ) goto err_deinit_host; - }else if (pp->has_msi_ctrl) { + }else if (pp->uses_imsi_rx) { ret =dw_pcie_msi_host_init (pp);if (ret <0 ) goto err_deinit_host;@@ -701,7 +701,7 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)dw_pcie_edma_remove (pci); err_free_msi: -if (pp->has_msi_ctrl) +if (pp->uses_imsi_rx)dw_pcie_free_msi (pp); err_deinit_host:@@ -729,7 +729,7 @@ void dw_pcie_host_deinit(struct dw_pcie_rp *pp)dw_pcie_edma_remove (pci); -if (pp->has_msi_ctrl) +if (pp->uses_imsi_rx)dw_pcie_free_msi (pp);if (pp->ops->deinit)@@ -1130,7 +1130,7 @@ int dw_pcie_setup_rc(struct dw_pcie_rp *pp)* the MSI and MSI-X capabilities of the Root Port to allow the drivers * to fall back to INTx instead. */ -if (pp->has_msi_ctrl) { +if (pp->uses_imsi_rx) {dw_pcie_remove_capability (pci,PCI_CAP_ID_MSI );dw_pcie_remove_capability (pci,PCI_CAP_ID_MSIX ); }drivers/pci/controller/dwc/pcie-designware.h +1
-1@@ -416,7 +416,7 @@ struct dw_pcie_host_ops { };struct dw_pcie_rp { -bool has_msi_ctrl:1 ; +bool uses_imsi_rx:1 ;bool cfg0_io_shared:1 ;u64 cfg0_base;void __iomem *va_cfg0_base;drivers/pci/controller/dwc/pcie-qcom.c +2
-2@@ -1633,7 +1633,7 @@ static void qcom_pci_free_msi(void *ptr) {struct dw_pcie_rp *pp = (struct dw_pcie_rp *)ptr; -if (pp && pp->has_msi_ctrl) +if (pp && pp->uses_imsi_rx)dw_pcie_free_msi (pp); }@@ -1657,7 +1657,7 @@ static int qcom_pcie_ecam_host_init(struct pci_config_window *cfg)if (ret)return ret; - pp->has_msi_ctrl = true; + pp->uses_imsi_rx = true;dw_pcie_msi_init (pp);return devm_add_action_or_reset (dev, qcom_pci_free_msi, pp);
Signature · 1 line
மணிவண்ணன் சதாசிவம்
Manivannan Sadhasivam
AppliedQuoted 11 lines · Qiang Yu
This series contains two cleanup patches for the PCI DWC subsystem that improve code readability and maintainability without any functional changes.
The first patch addresses a naming issue where the "
has_msi_ctrl" flag name was misleading. The flag specifically indicates when a platform uses the iMSI-RX module for MSI handling, rather than having any generic MSI controller. Renaming it to "uses_imsi_rx" makes the code's intent much clearer.[...]
Applied, thanks!
[1/2] PCI: dwc: Fix grammar and formatting in dw_pcie_remove_ext_capability()
commit: 8a214f64554ce4da91f35e7d3b8eaa9674f5154d
[2/2] PCI: dwc: Rename has_msi_ctrl to uses_imsi_rx for clarity
commit: 0ecd890e3cf54a0586247b9a384702703277e4fdBest regards,
Signature · 1 line
Manivannan Sadhasivam <[email protected]>