spi: cadence-xspi: support suspend/resume
PATCH 1/1 spi: cadence-xspi: support suspend/resume
Add system wide suspend and resume support, the suspend hook implementation is straightforward, just call spi_controller_suspend() While the resume hook implementation is a bit complex, we need to redo something which is done during probe, such as enable the interrupts, setup clk and config the phy for mrvl hw overlay.
--- drivers/spi/spi-cadence-xspi.c | 29 ++++++++++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-)
drivers/spi/spi-cadence-xspi.c +28 -1
@@ -350,6 +350,7 @@ static const int cdns_mrvl_xspi_clk_div_list[] = {struct cdns_xspi_dev {struct platform_device *pdev; +struct spi_controller *host;struct device *dev;void __iomem *iobase;
@@ -1159,9 +1160,10 @@ static int cdns_xspi_probe(struct platform_device *pdev) } host->bus_num =-1 ; -platform_set_drvdata (pdev, host); +platform_set_drvdata (pdev, cdns_xspi); cdns_xspi->pdev = pdev; + cdns_xspi->host = host; cdns_xspi->dev = &pdev->dev; cdns_xspi->cur_cs =0 ;
@@ -1250,6 +1252,30 @@ static int cdns_xspi_probe(struct platform_device *pdev)return 0 ; } +static int cdns_xspi_suspend (struct device *dev) +{ +struct cdns_xspi_dev *cdns_xspi =dev_get_drvdata (dev); + +return spi_controller_suspend (cdns_xspi->host); +} + +static int cdns_xspi_resume (struct device *dev) +{ +struct cdns_xspi_dev *cdns_xspi =dev_get_drvdata (dev); + +if (cdns_xspi->driver_data->mrvl_hw_overlay) { +cdns_mrvl_xspi_setup_clock (cdns_xspi,MRVL_DEFAULT_CLK ); +cdns_xspi_configure_phy (cdns_xspi); + } + + cdns_xspi->set_interrupts_handler (cdns_xspi, false); + +return spi_controller_resume (cdns_xspi->host); +} + +static DEFINE_SIMPLE_DEV_PM_OPS(cdns_xspi_pm_ops, + cdns_xspi_suspend, cdns_xspi_resume); +static const struct of_device_id cdns_xspi_of_match[] = { { .compatible ="cdns,xspi-nor" ,
@@ -1268,6 +1294,7 @@ static struct platform_driver cdns_xspi_platform_driver = { .driver = { .name = CDNS_XSPI_NAME, .of_match_table = cdns_xspi_of_match, + .pm = pm_sleep_ptr(&cdns_xspi_pm_ops), }, };
Signature · 1 line
2.51.0
Mark Brown
maintainerQuoted 8 lines · Jisheng Zhang
Add system wide suspend and resume support, the suspend hook implementation is straightforward, just call
spi_controller_suspend()While the resume hook implementation is a bit complex, we need to redo something which is done during probe, such as enable the interrupts, setup clk and config the phy for mrvl hw overlay.[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
Thanks!
[1/1] spi: cadence-xspi: support suspend/resume
commit: db6a59cfcc9364dec501993690a320d916ae3904
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark