Skip to contentSkip to conversation

i2c: designware-platdrv: refactor error handling and simplify cleanup

PATCH Superseded Artem Shimko 2 participants 3 messages Jan 23

Subsystems (3)

v5 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

PATCH v5 2/2 i2c: designware-platdrv: refactor error handling and simplify cleanup

Streamline the probe error handling by replacing goto statements with direct returns and using dev_err_probe() for consistent error reporting. This results in more linear and readable control flow.

Remove the explicit reset_control_assert() call from the driver's remove function, as the reset controller is acquired with devm_reset_control_get_optional_exclusive_deasserted() which manages the reset state automatically through devm resource management.

---
 drivers/i2c/busses/i2c-designware-platdrv.c | 37 +++++++--------------
 1 file changed, 12 insertions(+), 25 deletions(-)
drivers/i2c/busses/i2c-designware-platdrv.c +12 -25
index ab960458b5a8..74246fcd5138 100644
@@ -233,32 +233,26 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 
 	ret = i2c_dw_fw_parse_and_configure(dev);
 	if (ret)
-		goto exit_reset;
+		return ret;
 
 	ret = i2c_dw_probe_lock_support(dev);
-	if (ret) {
-		dev_err_probe(device, ret, "failed to probe lock support\n");
-		goto exit_reset;
-	}
+	if (ret)
+		return dev_err_probe(device, ret, "failed to probe lock support\n");
 
 	i2c_dw_configure(dev);
 
 	/* Optional interface clock */
 	dev->pclk = devm_clk_get_optional(device, "pclk");
-	if (IS_ERR(dev->pclk)) {
-		ret = dev_err_probe(device, PTR_ERR(dev->pclk), "failed to acquire pclk\n");
-		goto exit_reset;
-	}
+	if (IS_ERR(dev->pclk))
+		return dev_err_probe(device, PTR_ERR(dev->pclk), "failed to acquire pclk\n");
 
 	dev->clk = devm_clk_get_optional(device, NULL);
-	if (IS_ERR(dev->clk)) {
-		ret = dev_err_probe(device, PTR_ERR(dev->clk), "failed to acquire clock\n");
-		goto exit_reset;
-	}
+	if (IS_ERR(dev->clk))
+		return dev_err_probe(device, PTR_ERR(dev->clk), "failed to acquire clock\n");
 
 	ret = i2c_dw_prepare_clk(dev, true);
 	if (ret)
-		goto exit_reset;
+		return ret;
 
 	if (dev->clk) {
 		struct i2c_timings *t = &dev->timings;
@@ -298,17 +292,12 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	pm_runtime_enable(device);
 
 	ret = i2c_dw_probe(dev);
-	if (ret)
-		goto exit_probe;
+	if (ret) {
+		dw_i2c_plat_pm_cleanup(dev);
+		i2c_dw_prepare_clk(dev, false);
+	}
 
 	return ret;
-
-exit_probe:
-	dw_i2c_plat_pm_cleanup(dev);
-	i2c_dw_prepare_clk(dev, false);
-exit_reset:
-	reset_control_assert(dev->rst);
-	return ret;
 }
 
 static void dw_i2c_plat_remove(struct platform_device *pdev)
@@ -327,8 +316,6 @@ static void dw_i2c_plat_remove(struct platform_device *pdev)
 	dw_i2c_plat_pm_cleanup(dev);
 
 	i2c_dw_prepare_clk(dev, false);
-
-	reset_control_assert(dev->rst);
 }
 
 static const struct of_device_id dw_i2c_of_match[] = {
Signature · 1 line
2.43.0
#1 lore raw
Quoted 8 lines · Artem Shimko

Streamline the probe error handling by replacing goto statements with direct returns and using dev_err_probe() for consistent error reporting. This results in more linear and readable control flow.

Remove the explicit reset_control_assert() call from the driver's remove function, as the reset controller is acquired with devm_reset_control_get_optional_exclusive_deasserted() which manages the reset state automatically through devm resource management.

This change belongs in patch 1, same with the assert in the probe error path.

regards
Philipp

#2 lore raw
Quoted 6 lines · Philipp Zabel
Quoted 4 lines · Artem Shimko

Streamline the probe error handling by replacing goto statements with direct returns and using dev_err_probe() for consistent error reporting. This results in more linear and readable control flow.

Quoted 7 lines
Quoted 4 lines

Remove the explicit reset_control_assert() call from the driver's remove function, as the reset controller is acquired with devm_reset_control_get_optional_exclusive_deasserted() which manages the reset state automatically through devm resource management.

This change belongs in patch 1, same with the assert in the probe error path.

Hi Philipp,

You're absolutely right. I misunderstood Andy's earlier feedback in [1]. He was specifically referring to separating the dw_i2c_plat_pm_cleanup change into its own patch, not the reset_control_assert() changes.

I'll fix it.

Thank you.

[1] https://lore.kernel.org/all/[email protected]/T/#u

Regards,
artem