arm: Remove rel.dyn from SPL linker scripts
PATCH 1/1 arm: Remove rel.dyn from SPL linker scripts
As of v2026.01, no platforms contain any rel.dyn sections in their xPL phase images. Their inclusion in linker scripts initially was an oversight as part of taking the full U-Boot linker scripts and modifying them down. Then in commit 8b0ebe054bb3 ("arm: Update linker scripts to ensure appended device tree is aligned") these sections were used to force correct alignment for the device tree. This however, lead to a different problem.
That problem is that when we do not have a separate BSS section in SPL we instead would overlay the BSS with the rel.dyn section, in the common linker script case. This in turn lead to creating an incorrectly sized BSS "pad" file sometimes (depending on arbitrary changes within the rest of the binary itself). This in turn lead to the dtb being in the wrong location in the binary and not found at run time.
This commit fixes a few things:
- Remove the rel.dyn section from all ARM SPL linker scripts.
- In turn, this moves the dtb alignment statement in to another section.
- For ast2600 which uses CONFIG_POSITION_INDEPENDENT we need to keep the symbols however.
---
I sent this off-list to Fabio first to confirm it finally fixed things.
--- arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds | 8 -------- arch/arm/cpu/u-boot-spl.lds | 13 ++----------- arch/arm/mach-aspeed/ast2600/u-boot-spl.lds | 16 +++++++--------- board/davinci/da8xxevm/u-boot-spl-da850evm.lds | 9 ++------- 4 files changed, 11 insertions(+), 35 deletions(-)
arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds +0 -8
@@ -33,14 +33,6 @@ SECTIONS *(.data*) } - . = ALIGN(4); - - .rel.dyn : { - __rel_dyn_start = .; - *(.rel*) - __rel_dyn_end = .; - } - .bss : { . = ALIGN(4); __bss_start = .;
arch/arm/cpu/u-boot-spl.lds +2 -11
@@ -41,23 +41,14 @@ SECTIONS __binman_sym_start = .; KEEP(*(SORT(.binman_sym*))); __binman_sym_end = .; - } - - . = ALIGN(4); - - __image_copy_end = .; - - .rel.dyn : { - __rel_dyn_start = .; - *(.rel*) - __rel_dyn_end = .; . = ALIGN(8); } + __image_copy_end = .; _image_binary_end = .; _end = .; - .bss __rel_dyn_start (OVERLAY) : { + .bss : { __bss_start = .; *(.bss*) . = ALIGN(8);
arch/arm/mach-aspeed/ast2600/u-boot-spl.lds +7 -9
@@ -49,19 +49,17 @@ SECTIONS __binman_sym_start = .; KEEP(*(SORT(.binman_sym*))); __binman_sym_end = .; + . = ALIGN(8); } > .nor - . = ALIGN(4); + /* + * These platforms enable CONFIG_POSITION_INDEPENDENT and so need + * these names. The always however hold the same value. + */ + __rel_dyn_start = .; + __rel_dyn_end = .; __image_copy_end = .; - - .rel.dyn : { - __rel_dyn_start = .; - *(.rel*) - __rel_dyn_end = .; - . = ALIGN(8); - } > .nor - _end = .; _image_binary_end = .;
board/davinci/da8xxevm/u-boot-spl-da850evm.lds +2 -7
@@ -36,13 +36,8 @@ SECTIONS .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram . = ALIGN(4); - __u_boot_list : { KEEP(*(SORT(__u_boot_list*))); } >.sram - - . = ALIGN(4); - .rel.dyn : { - __rel_dyn_start = .; - *(.rel*) - __rel_dyn_end = .; + __u_boot_list : { + KEEP(*(SORT(__u_boot_list*))); . = ALIGN(8); } >.sram
Signature · 1 line
2.43.0
Quoted 112 lines
From: Tom Rini <[email protected]>
Sent: Wednesday, January 28, 2026 5:32 AMAs of v2026.01, no platforms contain any rel.dyn sections in their xPL phase images. Their inclusion in linker scripts initially was an oversight as part of taking the full U-Boot linker scripts and modifying them down. Then in commit
8b0ebe054bb3("arm: Update linker scripts to ensure appended device tree is aligned") these sections were used to force correct alignment for the device tree. This however, lead to a different problem.That problem is that when we do not have a separate BSS section in SPL we instead would overlay the BSS with the rel.dyn section, in the common linker script case. This in turn lead to creating an incorrectly sized BSS "pad" file sometimes (depending on arbitrary changes within the rest of the binary itself). This in turn lead to the dtb being in the wrong location in the binary and not found at run time.
This commit fixes a few things:
- Remove the rel.dyn section from all ARM SPL linker scripts.
- In turn, this moves the dtb alignment statement in to another section.
- For ast2600 which usesCONFIG_POSITION_INDEPENDENTwe need to keep the
symbols however.Tested-by Fabio Estevam <[email protected]>Reported-by Fabio Estevam <[email protected]>Co-developed-by Ilias Apalodimas <[email protected]>Signed-off-by Tom Rini <[email protected]>---
I sent this off-list to Fabio first to confirm it finally fixed things.Cc "Chia-Wei, Wang" <[email protected]>Cc Adam Ford <[email protected]>--- arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds | 8 -------- arch/arm/cpu/u-boot-spl.lds | 13 ++----------- arch/arm/mach-aspeed/ast2600/u-boot-spl.lds | 16 +++++++--------- board/davinci/da8xxevm/u-boot-spl-da850evm.lds | 9 ++------- 4 files changed, 11 insertions(+), 35 deletions(-)arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds +0
-8@@ -33,14 +33,6 @@ SECTIONS *(.data*) } - . = ALIGN(4); - - .rel.dyn : { - __rel_dyn_start = .; - *(.rel*) - __rel_dyn_end = .; - } - .bss : { . = ALIGN(4); __bss_start = .;arch/arm/cpu/u-boot-spl.lds index renamed from arch/arm/cpu/u-boot-spl.lds +0
-0
d780a5060774..c578c3ebf821100644arch/arm/cpu/u-boot-spl.lds +2
-11@@ -41,23 +41,14 @@ SECTIONS __binman_sym_start = .; KEEP(*(SORT(.binman_sym*))); __binman_sym_end = .; - } - - . = ALIGN(4); - - __image_copy_end = .; - - .rel.dyn : { - __rel_dyn_start = .; - *(.rel*) - __rel_dyn_end = .; . = ALIGN(8); } + __image_copy_end = .; _image_binary_end = .; _end = .; - .bss __rel_dyn_start (OVERLAY) : { + .bss : { __bss_start = .; *(.bss*) . = ALIGN(8);arch/arm/mach-aspeed/ast2600/u-boot-spl.lds +7
-2@@ -49,19 +49,17 @@ SECTIONS __binman_sym_start = .; KEEP(*(SORT(.binman_sym*))); __binman_sym_end = .; + . = ALIGN(8); } > .nor - . = ALIGN(4); + /* + * These platforms enable CONFIG_POSITION_INDEPENDENT and so need + * these names. The always however hold the same value. + */ + __rel_dyn_start = .; + __rel_dyn_end = .; __image_copy_end = .; -
arch/arm/mach-aspeed/ast2600/u-boot-spl.lds SECTIONS · line 65
Quoted 10 lines
arch/arm/mach-aspeed/ast2600/u-boot-spl.lds +0
-7- .rel.dyn : { - __rel_dyn_start = .; - *(.rel*) - __rel_dyn_end = .; - . = ALIGN(8); - } > .nor - _end = .; _image_binary_end = .;
Thanks for the fix.
Aspeed enables PIE mainly for the U-Boot execution. For SPL, the symbols should be fine to be the same.
Quoted 127 lines · ChiaWei Wang
Quoted 112 lines
From: Tom Rini <[email protected]>
Sent: Wednesday, January 28, 2026 5:32 AMAs of v2026.01, no platforms contain any rel.dyn sections in their xPL phase images. Their inclusion in linker scripts initially was an oversight as part of taking the full U-Boot linker scripts and modifying them down. Then in commit
8b0ebe054bb3("arm: Update linker scripts to ensure appended device tree is aligned") these sections were used to force correct alignment for the device tree. This however, lead to a different problem.That problem is that when we do not have a separate BSS section in SPL we instead would overlay the BSS with the rel.dyn section, in the common linker script case. This in turn lead to creating an incorrectly sized BSS "pad" file sometimes (depending on arbitrary changes within the rest of the binary itself). This in turn lead to the dtb being in the wrong location in the binary and not found at run time.
This commit fixes a few things:
- Remove the rel.dyn section from all ARM SPL linker scripts.
- In turn, this moves the dtb alignment statement in to another section.
- For ast2600 which usesCONFIG_POSITION_INDEPENDENTwe need to keep the
symbols however.Tested-by Fabio Estevam <[email protected]>Reported-by Fabio Estevam <[email protected]>Co-developed-by Ilias Apalodimas <[email protected]>Signed-off-by Tom Rini <[email protected]>---
I sent this off-list to Fabio first to confirm it finally fixed things.Cc "Chia-Wei, Wang" <[email protected]>Cc Adam Ford <[email protected]>--- arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds | 8 -------- arch/arm/cpu/u-boot-spl.lds | 13 ++----------- arch/arm/mach-aspeed/ast2600/u-boot-spl.lds | 16 +++++++--------- board/davinci/da8xxevm/u-boot-spl-da850evm.lds | 9 ++------- 4 files changed, 11 insertions(+), 35 deletions(-)arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds +0
-8@@ -33,14 +33,6 @@ SECTIONS *(.data*) } - . = ALIGN(4); - - .rel.dyn : { - __rel_dyn_start = .; - *(.rel*) - __rel_dyn_end = .; - } - .bss : { . = ALIGN(4); __bss_start = .;arch/arm/cpu/u-boot-spl.lds index renamed from arch/arm/cpu/u-boot-spl.lds +0
-0
d780a5060774..c578c3ebf821100644arch/arm/cpu/u-boot-spl.lds +2
-11@@ -41,23 +41,14 @@ SECTIONS __binman_sym_start = .; KEEP(*(SORT(.binman_sym*))); __binman_sym_end = .; - } - - . = ALIGN(4); - - __image_copy_end = .; - - .rel.dyn : { - __rel_dyn_start = .; - *(.rel*) - __rel_dyn_end = .; . = ALIGN(8); } + __image_copy_end = .; _image_binary_end = .; _end = .; - .bss __rel_dyn_start (OVERLAY) : { + .bss : { __bss_start = .; *(.bss*) . = ALIGN(8);arch/arm/mach-aspeed/ast2600/u-boot-spl.lds +7
-2@@ -49,19 +49,17 @@ SECTIONS __binman_sym_start = .; KEEP(*(SORT(.binman_sym*))); __binman_sym_end = .; + . = ALIGN(8); } > .nor - . = ALIGN(4); + /* + * These platforms enable CONFIG_POSITION_INDEPENDENT and so need + * these names. The always however hold the same value. + */ + __rel_dyn_start = .; + __rel_dyn_end = .; __image_copy_end = .; -arch/arm/mach-aspeed/ast2600/u-boot-spl.lds SECTIONS · line 65
Quoted 10 lines
arch/arm/mach-aspeed/ast2600/u-boot-spl.lds +0
-7- .rel.dyn : { - __rel_dyn_start = .; - *(.rel*) - __rel_dyn_end = .; - . = ALIGN(8); - } > .nor - _end = .; _image_binary_end = .;Thanks for the fix.
Aspeed enables PIE mainly for the U-Boot execution. For SPL, the symbols should be fine to be the same.
Quoted 1 line
Reviewed-by "Chia-Wei, Wang" <[email protected]>
Thanks. Does SPL really execute from address 0x0 on this platform? What confused me for a moment when looking in to this is that we have a non-zero CONFIG_TEXT_BASE but CONFIG_SPL_TEXT_BASE=0x0
Signature · 1 line
Tom
Quoted 138 lines
From: Tom Rini <[email protected]>
Sent: Wednesday, January 28, 2026 10:31 PMQuoted 12 lines · ChiaWei Wang
Quoted 12 lines
From: Tom Rini <[email protected]>
Sent: Wednesday, January 28, 2026 5:32 AMAs of v2026.01, no platforms contain any rel.dyn sections in their xPL phase images. Their inclusion in linker scripts initially was an oversight as part of taking the full U-Boot linker scripts and modifying them down. Then in commit
8b0ebe054bb3("arm: Update linker scripts to ensure appended device tree is
aligned") these sections were used to force correct alignment for the device tree. This however, lead to a different problem.Quoted 4 lines
Quoted 4 lines
That problem is that when we do not have a separate BSS section in SPL we instead would overlay the BSS with the rel.dyn section, in the common linker script case. This in turn lead to creating an incorrectly sized BSS "pad" file sometimes (depending on arbitrary changes
within the rest of the binary itself).
Quoted 7 lines
Quoted 7 lines
This in turn lead to the dtb being in the wrong location in the binary and not found at run time.
This commit fixes a few things:
- Remove the rel.dyn section from all ARM SPL linker scripts.
- In turn, this moves the dtb alignment statement in to another section.
- For ast2600 which usesCONFIG_POSITION_INDEPENDENTwe need tokeep
Quoted 82 lines
Quoted 82 lines
the
symbols however.Tested-by Fabio Estevam <[email protected]>Reported-by Fabio Estevam <[email protected]>Co-developed-by Ilias Apalodimas <[email protected]>Signed-off-by Tom Rini <[email protected]>---
I sent this off-list to Fabio first to confirm it finally fixed things.Cc "Chia-Wei, Wang" <[email protected]>Cc Adam Ford <[email protected]>--- arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds | 8 -------- arch/arm/cpu/u-boot-spl.lds | 13 ++----------- arch/arm/mach-aspeed/ast2600/u-boot-spl.lds | 16 +++++++--------- board/davinci/da8xxevm/u-boot-spl-da850evm.lds | 9 ++------- 4 files changed, 11 insertions(+), 35 deletions(-)arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds +0
-8@@ -33,14 +33,6 @@ SECTIONS *(.data*) } - . = ALIGN(4); - - .rel.dyn : { - __rel_dyn_start = .; - *(.rel*) - __rel_dyn_end = .; - } - .bss : { . = ALIGN(4); __bss_start = .;(quoted diff) +0
-0
b/arch/arm/cpu/u-boot-spl.ldsindexd780a5060774..c578c3ebf821100644arch/arm/cpu/u-boot-spl.lds +2
-11@@ -41,23 +41,14 @@ SECTIONS __binman_sym_start = .; KEEP(*(SORT(.binman_sym*))); __binman_sym_end = .; - } - - . = ALIGN(4); - - __image_copy_end = .; - - .rel.dyn : { - __rel_dyn_start = .; - *(.rel*) - __rel_dyn_end = .; . = ALIGN(8); } + __image_copy_end = .; _image_binary_end = .; _end = .; - .bss __rel_dyn_start (OVERLAY) : { + .bss : { __bss_start = .; *(.bss*) . = ALIGN(8);arch/arm/mach-aspeed/ast2600/u-boot-spl.lds +1
-0@@ -49,19 +49,17 @@ SECTIONS __binman_sym_start = .; KEEP(*(SORT(.binman_sym*))); __binman_sym_end = .; + . = ALIGN(8); } > .norQuoted 3 lines
arch/arm/mach-aspeed/ast2600/u-boot-spl.lds SECTIONS
Quoted 3 lines
arch/arm/mach-aspeed/ast2600/u-boot-spl.lds +2
-1- . = ALIGN(4); + /* + * These platforms enable CONFIG_POSITION_INDEPENDENT and soneed
Quoted 22 lines
Quoted 7 lines
arch/arm/mach-aspeed/ast2600/u-boot-spl.lds +4
-1+ * these names. The always however hold the same value. + */ + __rel_dyn_start = .; + __rel_dyn_end = .; __image_copy_end = .; -arch/arm/mach-aspeed/ast2600/u-boot-spl.lds SECTIONS · line 65
Quoted 10 lines
arch/arm/mach-aspeed/ast2600/u-boot-spl.lds +0
-7- .rel.dyn : { - __rel_dyn_start = .; - *(.rel*) - __rel_dyn_end = .; - . = ALIGN(8); - } > .nor - _end = .; _image_binary_end = .;Thanks for the fix.
Aspeed enables PIE mainly for the U-Boot execution. For SPL, the symbols should be fine to be the same.
Quoted 5 lines
Quoted 1 line
Reviewed-by "Chia-Wei, Wang" <[email protected]>Thanks. Does SPL really execute from address
0x0on this platform? What confused me for a moment when looking in to this is that we have a non-zeroCONFIG_TEXT_BASEbutCONFIG_SPL_TEXT_BASE=0x0
Yes, SPL executes from address 0x0.
This is backed by the configurable bus address decoding.
Depending on the boot media, ROM will configure the bus setting so that 0x0 will be decoded to either SRAM or SPI NOR Flash for XIP.
Regards,
Chiawei
Quoted 140 lines · ChiaWei Wang
Quoted 140 lines
From: Tom Rini <[email protected]>
Sent: Wednesday, January 28, 2026 10:31 PMQuoted 12 lines · ChiaWei Wang
Quoted 12 lines
From: Tom Rini <[email protected]>
Sent: Wednesday, January 28, 2026 5:32 AMAs of v2026.01, no platforms contain any rel.dyn sections in their xPL phase images. Their inclusion in linker scripts initially was an oversight as part of taking the full U-Boot linker scripts and modifying them down. Then in commit
8b0ebe054bb3("arm: Update linker scripts to ensure appended device tree is
aligned") these sections were used to force correct alignment for the device tree. This however, lead to a different problem.Quoted 4 lines
Quoted 4 lines
That problem is that when we do not have a separate BSS section in SPL we instead would overlay the BSS with the rel.dyn section, in the common linker script case. This in turn lead to creating an incorrectly sized BSS "pad" file sometimes (depending on arbitrary changes
within the rest of the binary itself).
Quoted 7 lines
Quoted 7 lines
This in turn lead to the dtb being in the wrong location in the binary and not found at run time.
This commit fixes a few things:
- Remove the rel.dyn section from all ARM SPL linker scripts.
- In turn, this moves the dtb alignment statement in to another section.
- For ast2600 which usesCONFIG_POSITION_INDEPENDENTwe need tokeep
Quoted 82 lines
Quoted 82 lines
the
symbols however.Tested-by Fabio Estevam <[email protected]>Reported-by Fabio Estevam <[email protected]>Co-developed-by Ilias Apalodimas <[email protected]>Signed-off-by Tom Rini <[email protected]>---
I sent this off-list to Fabio first to confirm it finally fixed things.Cc "Chia-Wei, Wang" <[email protected]>Cc Adam Ford <[email protected]>--- arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds | 8 -------- arch/arm/cpu/u-boot-spl.lds | 13 ++----------- arch/arm/mach-aspeed/ast2600/u-boot-spl.lds | 16 +++++++--------- board/davinci/da8xxevm/u-boot-spl-da850evm.lds | 9 ++------- 4 files changed, 11 insertions(+), 35 deletions(-)arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds +0
-8@@ -33,14 +33,6 @@ SECTIONS *(.data*) } - . = ALIGN(4); - - .rel.dyn : { - __rel_dyn_start = .; - *(.rel*) - __rel_dyn_end = .; - } - .bss : { . = ALIGN(4); __bss_start = .;(quoted diff) +0
-0
b/arch/arm/cpu/u-boot-spl.ldsindexd780a5060774..c578c3ebf821100644arch/arm/cpu/u-boot-spl.lds +2
-11@@ -41,23 +41,14 @@ SECTIONS __binman_sym_start = .; KEEP(*(SORT(.binman_sym*))); __binman_sym_end = .; - } - - . = ALIGN(4); - - __image_copy_end = .; - - .rel.dyn : { - __rel_dyn_start = .; - *(.rel*) - __rel_dyn_end = .; . = ALIGN(8); } + __image_copy_end = .; _image_binary_end = .; _end = .; - .bss __rel_dyn_start (OVERLAY) : { + .bss : { __bss_start = .; *(.bss*) . = ALIGN(8);arch/arm/mach-aspeed/ast2600/u-boot-spl.lds +1
-0@@ -49,19 +49,17 @@ SECTIONS __binman_sym_start = .; KEEP(*(SORT(.binman_sym*))); __binman_sym_end = .; + . = ALIGN(8); } > .norQuoted 3 lines
arch/arm/mach-aspeed/ast2600/u-boot-spl.lds SECTIONS
Quoted 3 lines
arch/arm/mach-aspeed/ast2600/u-boot-spl.lds +2
-1- . = ALIGN(4); + /* + * These platforms enable CONFIG_POSITION_INDEPENDENT and soneed
Quoted 23 lines
Quoted 7 lines
arch/arm/mach-aspeed/ast2600/u-boot-spl.lds +4
-1+ * these names. The always however hold the same value. + */ + __rel_dyn_start = .; + __rel_dyn_end = .; __image_copy_end = .; -arch/arm/mach-aspeed/ast2600/u-boot-spl.lds SECTIONS · line 65
Quoted 10 lines
arch/arm/mach-aspeed/ast2600/u-boot-spl.lds +0
-7- .rel.dyn : { - __rel_dyn_start = .; - *(.rel*) - __rel_dyn_end = .; - . = ALIGN(8); - } > .nor - _end = .; _image_binary_end = .;Thanks for the fix.
Aspeed enables PIE mainly for the U-Boot execution. For SPL, the symbols should be fine to be the same.Reviewed-by "Chia-Wei, Wang" <[email protected]>
Quoted 8 lines
Quoted 3 lines
Thanks. Does SPL really execute from address
0x0on this platform? What confused me for a moment when looking in to this is that we have a non-zeroCONFIG_TEXT_BASEbutCONFIG_SPL_TEXT_BASE=0x0Yes, SPL executes from address
0x0.
This is backed by the configurable bus address decoding. Depending on the boot media, ROM will configure the bus setting so that0x0will be decoded to either SRAM or SPI NOR Flash for XIP.
Ah, neat! It would be nice to have that in the board docs someday ;)
Signature · 1 line
Tom
Quoted 9 lines · Tom Rini
As of v2026.01, no platforms contain any rel.dyn sections in their xPL phase images. Their inclusion in linker scripts initially was an oversight as part of taking the full U-Boot linker scripts and modifying them down. Then in commit
8b0ebe054bb3("arm: Update linker scripts to ensure appended device tree is aligned") these sections were used to force correct alignment for the device tree. This however, lead to a different problem.[...]
Applied to u-boot/master, thanks!
[1/1] arm: Remove rel.dyn from SPL linker scripts
commit: 5ffc1dcc26d3df9e2b192151936cb98014fb6e49
Signature · 1 line
Tom