PCI: endpoint: pci-epf-test: Allow overriding default BAR sizes
Subsystems (3)
PATCH v3 1/1 PCI: endpoint: pci-epf-test: Allow overriding default BAR sizes
Add bar{0,1,2,3,4,5}_size attributes in configfs, so that the user is not restricted to run pci-epf-test with the hardcoded BAR size values defined in pci-epf-test.c.
This code is shamelessly more or less copy pasted from pci-epf-vntb.c
Reviewed-by Frank Li <[email protected]>
Tested-by Koichiro Den <[email protected]>
Signed-off-by Niklas Cassel <[email protected]>
---
Changes since V2:
-Document that BAR sizes can only be changed before binding the EPF to an
EPC.
-Make the code return -EINVAL if trying to change a BAR size after binding
the EPF to an EPC.
Documentation/PCI/endpoint/pci-test-howto.rst | 19 ++++ drivers/pci/endpoint/functions/pci-epf-test.c | 99 ++++++++++++++++++- 2 files changed, 116 insertions(+), 2 deletions(-)
Documentation/PCI/endpoint/pci-test-howto.rst +19 -0
@@ -84,6 +84,25 @@ device, the following commands can be used:: # echo 32 > functions/pci_epf_test/func1/msi_interrupts # echo 2048 > functions/pci_epf_test/func1/msix_interrupts +By default, pci-epf-test uses the following BAR sizes:: + + # grep . functions/pci_epf_test/func1/pci_epf_test.0/bar?_size + functions/pci_epf_test/func1/pci_epf_test.0/bar0_size:131072 + functions/pci_epf_test/func1/pci_epf_test.0/bar1_size:131072 + functions/pci_epf_test/func1/pci_epf_test.0/bar2_size:131072 + functions/pci_epf_test/func1/pci_epf_test.0/bar3_size:131072 + functions/pci_epf_test/func1/pci_epf_test.0/bar4_size:131072 + functions/pci_epf_test/func1/pci_epf_test.0/bar5_size:1048576 + +The user can override a default value using e.g.:: + # echo 1048576 > functions/pci_epf_test/func1/pci_epf_test.0/bar1_size + +Overriding the default BAR sizes can only be done before binding the +pci-epf-test device to a PCI endpoint controller driver. + +Note: Some endpoint controllers might have fixed size BARs, or reserved BARs, +for such controllers, the corresponding BAR size in configfs will be ignored. + Binding pci-epf-test Device to EP Controller --------------------------------------------
drivers/pci/endpoint/functions/pci-epf-test.c +97 -2
147 lines not on this page · raw message
base-commit: 0ebf8e7943e01b2c38c199228f51adbb89c02425
Signature · 1 line
2.52.0