Skip to contentSkip to conversation

arm64: dts: broadcom: ns2-svk: Rename at25 node to eeprom

PATCH In review Lee Yongjun 2 participants 2 messages Jan 29 – Jan 30

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 arm64: dts: broadcom: ns2-svk: Rename at25 node to eeprom

The AT25 EEPROM node on the Northstar 2 SVK board uses a non-standard node name, which triggers dtbs_check warnings.

Update the node to follow the dt-schema by renaming the node from at25@0 to eeprom@0.

Note that other legacy property updates (byte-len, page-size, addr-mode) are handled by a separate patch.

---
Changes in v2:
- Dropped property updates (size, pagesize, etc) as they are handled by another patch.
- Renamed the node as requested by the maintainer.

 arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts +1 -1
index 5939d342aec7..ce1b099a8804 100644
@@ -127,7 +127,7 @@ slic@0 {
 &ssp1 {
 	status = "okay";
 
-	at25@0 {
+	eeprom@0 {
 		compatible = "atmel,at25";
 		reg = <0>;
 		spi-max-frequency = <5000000>;
Signature · 1 line
2.34.1
Acked-by on v2 1/1
#1 lore raw
Quoted 36 lines · Lee Yongjun

The AT25 EEPROM node on the Northstar 2 SVK board uses a non-standard node name, which triggers dtbs_check warnings.

Update the node to follow the dt-schema by renaming the node from at25@0 to eeprom@0.

Note that other legacy property updates (byte-len, page-size, addr-mode) are handled by a separate patch.

---
Changes in v2:
- Dropped property updates (size, pagesize, etc) as they are handled by
another patch.
- Renamed the node as requested by the maintainer.

 arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts +1 -2
index 5939d342aec7..ce1b099a8804 100644
@@ -127,7 +127,7 @@ slic@0 {
 &ssp1 {
        status = "okay";
 
-       at25@0 {
+       eeprom@0 {
                compatible = "atmel,at25";
                reg = <0>;
                spi-max-frequency = <5000000>;
--

2.34.1

Quoted 1 line

Looks fine to me. Thanks.