arm64: dts: ti: k3-am69-aquila: Fix DP enable GPIO
cover arm64: dts: ti: k3-am69-aquila: Fix DP enable GPIO
From: Franz Schnyder <[email protected]>
Correct the DP regulator enable GPIO to index 21 on Clover and Dev board. The 3.3V DP regulator was not being enabled by the assigned GPIO, as it is routed to GPIO index 21 and not 37, which was causing instability with displays connected over DP or via an active DP-to-HDMI adapter.
Franz Schnyder (2):
arm64: dts: ti: k3-am69-aquila-dev: Fix DP regulator enable GPIO
arm64: dts: ti: k3-am69-aquila-clover: Fix DP regulator enable GPIO
arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts | 2 +- arch/arm64/boot/dts/ti/k3-am69-aquila-dev.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
Signature · 1 line
2.43.0
PATCH 1/2 arm64: dts: ti: k3-am69-aquila-dev: Fix DP regulator enable GPIO
From: Franz Schnyder <[email protected]>
Correct the DP regulator enable GPIO to index 21.
The 3.3V DP regulator was not being enabled by the assigned GPIO, as it is routed to GPIO index 21 and not 37, which was causing instability with displays connected over DP or via an active DP-to-HDMI adapter.
--- arch/arm64/boot/dts/ti/k3-am69-aquila-dev.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/ti/k3-am69-aquila-dev.dts +1 -1
@@ -33,7 +33,7 @@ reg_3v3_dp: regulator-3v3-dp { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_21_dp>; /* Aquila GPIO_21_DP (AQUILA B57) */ - gpio = <&main_gpio0 37 GPIO_ACTIVE_HIGH>; + gpio = <&main_gpio0 21 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-max-microvolt = <3300000>; regulator-min-microvolt = <3300000>;
Signature · 1 line
2.43.0
PATCH 2/2 arm64: dts: ti: k3-am69-aquila-clover: Fix DP regulator enable GPIO
In reply to Franz SchnyderFrom: Franz Schnyder <[email protected]>
Correct the DP regulator enable GPIO to index 21.
The 3.3V DP regulator was not being enabled by the assigned GPIO, as it is routed to GPIO index 21 and not 37, which was causing instability with displays connected over DP or via an active DP-to-HDMI adapter.
--- arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts +1 -1
@@ -26,7 +26,7 @@ reg_3v3_dp: regulator-3v3-dp { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_21_dp>; /* Aquila GPIO_21_DP (AQUILA B57) */ - gpio = <&main_gpio0 37 GPIO_ACTIVE_HIGH>; + gpio = <&main_gpio0 21 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-max-microvolt = <3300000>; regulator-min-microvolt = <3300000>;
Signature · 1 line
2.43.0
Quoted 6 lines · Franz Schnyder
From: Franz Schnyder <[email protected]>
Correct the DP regulator enable GPIO to index 21 on Clover and Dev board. The 3.3V DP regulator was not being enabled by the assigned GPIO, as it is routed to GPIO index 21 and not 37, which was causing instability with displays connected over DP or via an active DP-to-HDMI adapter.
Hi Franz Schnyder,
Quoted 10 lines · Franz Schnyder
Correct the DP regulator enable GPIO to index 21 on Clover and Dev board. The 3.3V DP regulator was not being enabled by the assigned GPIO, as it is routed to GPIO index 21 and not 37, which was causing instability with displays connected over DP or via an active DP-to-HDMI adapter.
Franz Schnyder (2):
arm64: dts: ti: k3-am69-aquila-dev: Fix DP regulator enable GPIO
arm64: dts: ti: k3-am69-aquila-clover: Fix DP regulator enable GPIO[...]
I have applied the following to branch ti-k3-dts-next on [1]. Thank you!
[1/2] arm64: dts: ti: k3-am69-aquila-dev: Fix DP regulator enable GPIO
commit: 222191225e69711089ecade3b98d79757d51e907
[2/2] arm64: dts: ti: k3-am69-aquila-clover: Fix DP regulator enable GPIO
commit: 8cfb2e517113543e0de9e8df5754d5e09cb3627eAll being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh