linux: fix 'architectures' typo
PATCH 1/4 linux: fix 'architectures' typo
Found by codespell.
--- linux/Config.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
linux/Config.in +1 -1
@@ -473,7 +473,7 @@ config BR2_LINUX_KERNEL_CUSTOM_DTS_DIR match the vendor subdirectory used by the board in the kernel (e.g. arch/arm64/boot/dts/rockchip/). - While most architechtures make use of vendor subdirectories, + While most architectures make use of vendor subdirectories, like arm, arm64 and riscv, some architectures like powerpc and xtensa do not. In this case, BR2_LINUX_KERNEL_CUSTOM_DTS_DIR should point to
Signature · 6 lines
2.47.3 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH 2/4 boot/uboot: fix 'bootloader' typo
Found by codespell.
--- boot/uboot/Config.in | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
boot/uboot/Config.in +2 -2
@@ -685,7 +685,7 @@ config BR2_TARGET_UBOOT_ZYNQMP_PSU_INIT_FILE string "Custom psu_init_gpl file" depends on BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG help - On ZynqMP the booloader is responsible for some basic + On ZynqMP the bootloader is responsible for some basic initializations, such as enabling peripherals and configuring pinmuxes. The psu_init_gpl.c file (and, optionally, psu_init_gpl.h) contains the code for such
@@ -722,7 +722,7 @@ config BR2_TARGET_UBOOT_ZYNQ_PS7_INIT_FILE depends on BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG depends on BR2_TARGET_UBOOT_ZYNQ help - On Zynq the booloader is responsible for some basic + On Zynq the bootloader is responsible for some basic initializations, such as enabling peripherals and configuring pinmuxes. The ps7_init_gpl.c file (and, optionally, ps7_init_gpl.h) contains the code for such
Signature · 6 lines
2.47.3 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Thomas Perale via buildroot
AppliedRe: [Buildroot] [PATCH 2/4] boot/uboot: fix 'bootloader' typo
In reply of:
Quoted 3 lines
Found by codespell.
Signed-off-by Peter Korsgaard <[email protected]>
Applied to 2025.11.x. Thanks
Quoted 33 lines
--- boot/uboot/Config.in | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)boot/uboot/Config.in +2
-2@@ -685,7 +685,7 @@ config BR2_TARGET_UBOOT_ZYNQMP_PSU_INIT_FILE string "Custom psu_init_gpl file" depends on BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG help - On ZynqMP the booloader is responsible for some basic + On ZynqMP the bootloader is responsible for some basic initializations, such as enabling peripherals and configuring pinmuxes. The psu_init_gpl.c file (and, optionally, psu_init_gpl.h) contains the code for such@@ -722,7 +722,7 @@ config BR2_TARGET_UBOOT_ZYNQ_PS7_INIT_FILE depends on BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG depends on BR2_TARGET_UBOOT_ZYNQ help - On Zynq the booloader is responsible for some basic + On Zynq the bootloader is responsible for some basic initializations, such as enabling peripherals and configuring pinmuxes. The ps7_init_gpl.c file (and, optionally, ps7_init_gpl.h) contains the code for suchSignature · 6 lines
2.47.3 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH 3/4 boot/grub2: fix 'targeting' typo
In reply to Peter KorsgaardFound by codespell.
--- boot/grub2/Config.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
boot/grub2/Config.in +1 -1
@@ -118,7 +118,7 @@ config BR2_TARGET_GRUB2_LOONGARCH64_EFI depends on BR2_loongarch64 select BR2_TARGET_GRUB2_HAS_EFI_BOOT help - Select this option if the platform you're targetting is a + Select this option if the platform you're targeting is a 64bit LoongArch platform and you want to boot Grub 2 as an EFI application.
Signature · 6 lines
2.47.3 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Thomas Perale via buildroot
AppliedRe: [Buildroot] [PATCH 3/4] boot/grub2: fix 'targeting' typo
In reply of:
Quoted 3 lines
Found by codespell.
Signed-off-by Peter Korsgaard <[email protected]>
Applied to 2025.11.x. Thanks
Quoted 24 lines
--- boot/grub2/Config.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)boot/grub2/Config.in +1
-1@@ -118,7 +118,7 @@ config BR2_TARGET_GRUB2_LOONGARCH64_EFI depends on BR2_loongarch64 select BR2_TARGET_GRUB2_HAS_EFI_BOOT help - Select this option if the platform you're targetting is a + Select this option if the platform you're targeting is a 64bit LoongArch platform and you want to boot Grub 2 as an EFI application.Signature · 6 lines
2.47.3 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH 4/4 arch/Config.in.arc: fix 'operations' typo
In reply to Peter KorsgaardFound by codespell.
--- arch/Config.in.arc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/Config.in.arc +1 -1
@@ -31,7 +31,7 @@ config BR2_archs38_full bool "ARC HS38 with Quad MAC & FPU" help Fully featured ARC HS with additional support for - - Dual- and quad multiply and MC oprations + - Dual- and quad multiply and MC operations - Double-precision FPU It corresponds to "hs38_slc_full" ARC HS template in
Signature · 6 lines
2.47.3 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Thomas Perale via buildroot
AppliedRe: [Buildroot] [PATCH 4/4] arch/Config.in.arc: fix 'operations' typo
In reply of:
Quoted 3 lines
Found by codespell.
Signed-off-by Peter Korsgaard <[email protected]>
Applied to 2025.02.x & 2025.11.x. Thanks
Quoted 24 lines
--- arch/Config.in.arc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/Config.in.arc +1
-1@@ -31,7 +31,7 @@ config BR2_archs38_full bool "ARC HS38 with Quad MAC & FPU" help Fully featured ARC HS with additional support for - - Dual- and quad multiply and MC oprations + - Dual- and quad multiply and MC operations - Double-precision FPU It corresponds to "hs38_slc_full" ARC HS template inSignature · 6 lines
2.47.3 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Quoted 3 lines · Peter Korsgaard
Found by codespell.
Signed-off-by Peter Korsgaard <[email protected]>
Series applied to master, thanks.
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Thomas Perale via buildroot
AppliedIn reply of:
Quoted 3 lines
Found by codespell.
Signed-off-by Peter Korsgaard <[email protected]>
Applied to 2025.02.x & 2025.11.x. Thanks
Quoted 24 lines
--- linux/Config.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)linux/Config.in +1
-1@@ -473,7 +473,7 @@ config BR2_LINUX_KERNEL_CUSTOM_DTS_DIR match the vendor subdirectory used by the board in the kernel (e.g. arch/arm64/boot/dts/rockchip/). - While most architechtures make use of vendor subdirectories, + While most architectures make use of vendor subdirectories, like arm, arm64 and riscv, some architectures like powerpc and xtensa do not. In this case, BR2_LINUX_KERNEL_CUSTOM_DTS_DIR should point toSignature · 6 lines
2.47.3 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot