Skip to contentSkip to conversation

FAILED: patch "[PATCH] scsi: qla2xxx: Fix bsg_done() causing double free" failed to apply to 5.10-stable tree

PATCH New [email protected] 2 participants 2 messages Feb 13 – Feb 14

Subsystems (3)
Stable branch SCSI QLogic QLA2XXX FC-SCSI driver
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x c2c68225b1456f4d0d393b5a8778d51bb0d5b1d0
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2026021341-remarry-footsore-fd7e@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From c2c68225b1456f4d0d393b5a8778d51bb0d5b1d0 Mon Sep 17 00:00:00 2001
From: Anil Gurumurthy <[email protected]>
Date: Wed, 10 Dec 2025 15:46:03 +0530
Subject: [PATCH] scsi: qla2xxx: Fix bsg_done() causing double free

Kernel panic observed on system,
[5353358.825191] BUG: unable to handle page fault for address: ff5f5e897b024000
[5353358.825194] #PF: supervisor write access in kernel mode
[5353358.825195] #PF: error_code(0x0002) - not-present page
[5353358.825196] PGD 100006067 P4D 0
[5353358.825198] Oops: 0002 [#1] PREEMPT SMP NOPTI
[5353358.825200] CPU: 5 PID: 2132085 Comm: qlafwupdate.sub Kdump: loaded Tainted: G        W    L    -------  ---  5.14.0-503.34.1.el9_5.x86_64 #1
[5353358.825203] Hardware name: HPE ProLiant DL360 Gen11/ProLiant DL360 Gen11, BIOS 2.44 01/17/2025
[5353358.825204] RIP: 0010:memcpy_erms+0x6/0x10
[5353358.825211] RSP: 0018:ff591da8f4f6b710 EFLAGS: 00010246
[5353358.825212] RAX: ff5f5e897b024000 RBX: 0000000000007090 RCX: 0000000000001000
[5353358.825213] RDX: 0000000000001000 RSI: ff591da8f4fed090 RDI: ff5f5e897b024000
[5353358.825214] RBP: 0000000000010000 R08: ff5f5e897b024000 R09: 0000000000000000
[5353358.825215] R10: ff46cf8c40517000 R11: 0000000000000001 R12: 0000000000008090
[5353358.825216] R13: ff591da8f4f6b720 R14: 0000000000001000 R15: 0000000000000000
[5353358.825218] FS:  00007f1e88d47740(0000) GS:ff46cf935f940000(0000) knlGS:0000000000000000
[5353358.825219] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[5353358.825220] CR2: ff5f5e897b024000 CR3: 0000000231532004 CR4: 0000000000771ef0
[5353358.825221] PKRU: 55555554
[5353358.825222] Call Trace:
[5353358.825223]  <TASK>
[5353358.825224]  ? show_trace_log_lvl+0x1c4/0x2df
[5353358.825229]  ? show_trace_log_lvl+0x1c4/0x2df
[5353358.825232]  ? sg_copy_buffer+0xc8/0x110
[5353358.825236]  ? __die_body.cold+0x8/0xd
[5353358.825238]  ? page_fault_oops+0x134/0x170
[5353358.825242]  ? kernelmode_fixup_or_oops+0x84/0x110
[5353358.825244]  ? exc_page_fault+0xa8/0x150
[5353358.825247]  ? asm_exc_page_fault+0x22/0x30
[5353358.825252]  ? memcpy_erms+0x6/0x10
[5353358.825253]  sg_copy_buffer+0xc8/0x110
[5353358.825259]  qla2x00_process_vendor_specific+0x652/0x1320 [qla2xxx]
[5353358.825317]  qla24xx_bsg_request+0x1b2/0x2d0 [qla2xxx]

Most routines in qla_bsg.c call bsg_done() only for success cases. However a few invoke it for failure case as well leading to a double free. Validate before calling bsg_done().

Cc [email protected]
Signed-off-by Anil Gurumurthy <[email protected]>
Signed-off-by Nilesh Javali <[email protected]>
Reviewed-by Himanshu Madhani <[email protected]>
Link https://patch.msgid.link/[email protected] open here
Signed-off-by Martin K. Petersen <[email protected]>
drivers/scsi/qla2xxx/qla_bsg.c +20 -13
index 8afa8a4b8ccb..2c44a379cb23 100644
@@ -1548,8 +1548,9 @@ qla2x00_update_optrom(struct bsg_job *bsg_job)
 	ha->optrom_buffer = NULL;
 	ha->optrom_state = QLA_SWAITING;
 	mutex_unlock(&ha->optrom_mutex);
-	bsg_job_done(bsg_job, bsg_reply->result,
-		       bsg_reply->reply_payload_rcv_len);
+	if (!rval)
+		bsg_job_done(bsg_job, bsg_reply->result,
+			     bsg_reply->reply_payload_rcv_len);
 	return rval;
 }
 

@@ -2638,8 +2639,9 @@ qla2x00_manage_host_stats(struct bsg_job *bsg_job)
 				    sizeof(struct ql_vnd_mng_host_stats_resp));
 
 	bsg_reply->result = DID_OK;
-	bsg_job_done(bsg_job, bsg_reply->result,
-		     bsg_reply->reply_payload_rcv_len);
+	if (!ret)
+		bsg_job_done(bsg_job, bsg_reply->result,
+			     bsg_reply->reply_payload_rcv_len);
 
 	return ret;
 }

@@ -2728,8 +2730,9 @@ qla2x00_get_host_stats(struct bsg_job *bsg_job)
 							       bsg_job->reply_payload.sg_cnt,
 							       data, response_len);
 	bsg_reply->result = DID_OK;
-	bsg_job_done(bsg_job, bsg_reply->result,
-		     bsg_reply->reply_payload_rcv_len);
+	if (!ret)
+		bsg_job_done(bsg_job, bsg_reply->result,
+			     bsg_reply->reply_payload_rcv_len);
 
 	kfree(data);
 host_stat_out:

@@ -2828,8 +2831,9 @@ qla2x00_get_tgt_stats(struct bsg_job *bsg_job)
 				    bsg_job->reply_payload.sg_cnt, data,
 				    response_len);
 	bsg_reply->result = DID_OK;
-	bsg_job_done(bsg_job, bsg_reply->result,
-		     bsg_reply->reply_payload_rcv_len);
+	if (!ret)
+		bsg_job_done(bsg_job, bsg_reply->result,
+			     bsg_reply->reply_payload_rcv_len);
 
 tgt_stat_out:
 	kfree(data);

@@ -2890,8 +2894,9 @@ qla2x00_manage_host_port(struct bsg_job *bsg_job)
 				    bsg_job->reply_payload.sg_cnt, &rsp_data,
 				    sizeof(struct ql_vnd_mng_host_port_resp));
 	bsg_reply->result = DID_OK;
-	bsg_job_done(bsg_job, bsg_reply->result,
-		     bsg_reply->reply_payload_rcv_len);
+	if (!ret)
+		bsg_job_done(bsg_job, bsg_reply->result,
+			     bsg_reply->reply_payload_rcv_len);
 
 	return ret;
 }

@@ -3272,7 +3277,8 @@ int qla2x00_mailbox_passthru(struct bsg_job *bsg_job)
 
 	bsg_job->reply_len = sizeof(*bsg_job->reply);
 	bsg_reply->result = DID_OK << 16;
-	bsg_job_done(bsg_job, bsg_reply->result, bsg_reply->reply_payload_rcv_len);
+	if (!ret)
+		bsg_job_done(bsg_job, bsg_reply->result, bsg_reply->reply_payload_rcv_len);
 
 	kfree(req_data);
 

@@ -3359,8 +3365,9 @@ static int qla28xx_validate_flash_image(struct bsg_job *bsg_job)
 	bsg_reply->result = DID_OK << 16;
 	bsg_reply->reply_payload_rcv_len = 0;
 	bsg_job->reply_len = sizeof(struct fc_bsg_reply);
-	bsg_job_done(bsg_job, bsg_reply->result,
-			bsg_reply->reply_payload_rcv_len);
+	if (!rval)
+		bsg_job_done(bsg_job, bsg_reply->result,
+			     bsg_reply->reply_payload_rcv_len);
 
 	return QLA_SUCCESS;
 }
maintainer
#1 lore raw

PATCH 1/1 scsi: qla2xxx: Fix bsg_done() causing double free

From: Anil Gurumurthy <[email protected]>

[ Upstream commit c2c68225b1456f4d0d393b5a8778d51bb0d5b1d0 ]

Kernel panic observed on system,
[5353358.825191] BUG: unable to handle page fault for address: ff5f5e897b024000
[5353358.825194] #PF: supervisor write access in kernel mode
[5353358.825195] #PF: error_code(0x0002) - not-present page
[5353358.825196] PGD 100006067 P4D 0
[5353358.825198] Oops: 0002 [#1] PREEMPT SMP NOPTI
[5353358.825200] CPU: 5 PID: 2132085 Comm: qlafwupdate.sub Kdump: loaded Tainted: G        W    L    -------  ---  5.14.0-503.34.1.el9_5.x86_64 #1
[5353358.825203] Hardware name: HPE ProLiant DL360 Gen11/ProLiant DL360 Gen11, BIOS 2.44 01/17/2025
[5353358.825204] RIP: 0010:memcpy_erms+0x6/0x10
[5353358.825211] RSP: 0018:ff591da8f4f6b710 EFLAGS: 00010246
[5353358.825212] RAX: ff5f5e897b024000 RBX: 0000000000007090 RCX: 0000000000001000
[5353358.825213] RDX: 0000000000001000 RSI: ff591da8f4fed090 RDI: ff5f5e897b024000
[5353358.825214] RBP: 0000000000010000 R08: ff5f5e897b024000 R09: 0000000000000000
[5353358.825215] R10: ff46cf8c40517000 R11: 0000000000000001 R12: 0000000000008090
[5353358.825216] R13: ff591da8f4f6b720 R14: 0000000000001000 R15: 0000000000000000
[5353358.825218] FS:  00007f1e88d47740(0000) GS:ff46cf935f940000(0000) knlGS:0000000000000000
[5353358.825219] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[5353358.825220] CR2: ff5f5e897b024000 CR3: 0000000231532004 CR4: 0000000000771ef0
[5353358.825221] PKRU: 55555554
[5353358.825222] Call Trace:
[5353358.825223]  <TASK>
[5353358.825224]  ? show_trace_log_lvl+0x1c4/0x2df
[5353358.825229]  ? show_trace_log_lvl+0x1c4/0x2df
[5353358.825232]  ? sg_copy_buffer+0xc8/0x110
[5353358.825236]  ? __die_body.cold+0x8/0xd
[5353358.825238]  ? page_fault_oops+0x134/0x170
[5353358.825242]  ? kernelmode_fixup_or_oops+0x84/0x110
[5353358.825244]  ? exc_page_fault+0xa8/0x150
[5353358.825247]  ? asm_exc_page_fault+0x22/0x30
[5353358.825252]  ? memcpy_erms+0x6/0x10
[5353358.825253]  sg_copy_buffer+0xc8/0x110
[5353358.825259]  qla2x00_process_vendor_specific+0x652/0x1320 [qla2xxx]
[5353358.825317]  qla24xx_bsg_request+0x1b2/0x2d0 [qla2xxx]

Most routines in qla_bsg.c call bsg_done() only for success cases. However a few invoke it for failure case as well leading to a double free. Validate before calling bsg_done().

Cc [email protected]
Signed-off-by Anil Gurumurthy <[email protected]>
Signed-off-by Nilesh Javali <[email protected]>
Reviewed-by Himanshu Madhani <[email protected]>
Link https://patch.msgid.link/[email protected] open here
Signed-off-by Martin K. Petersen <[email protected]>
[ applied only to qla2x00_update_optrom() ]
Signed-off-by Sasha Levin <[email protected]>
---
 drivers/scsi/qla2xxx/qla_bsg.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/scsi/qla2xxx/qla_bsg.c +3 -2
index 4324f4643e834..c37945ac9eca7 100644
@@ -1523,8 +1523,9 @@ qla2x00_update_optrom(struct bsg_job *bsg_job)
 	ha->optrom_buffer = NULL;
 	ha->optrom_state = QLA_SWAITING;
 	mutex_unlock(&ha->optrom_mutex);
-	bsg_job_done(bsg_job, bsg_reply->result,
-		       bsg_reply->reply_payload_rcv_len);
+	if (!rval)
+		bsg_job_done(bsg_job, bsg_reply->result,
+			     bsg_reply->reply_payload_rcv_len);
 	return rval;
 }
Signature · 1 line
2.51.0