poll: fix LTP check warnings and improve poll01 validation
PATCH 1/1 poll: fix LTP check warnings and improve poll01 validation
Remove extra blank lines, mark helper functions as static, and fix documentation comments starting with '/*\'.
Add explicit checks for poll() return value and validate that no unexpected revents bits are set for POLLIN and POLLOUT cases.
--- testcases/kernel/syscalls/poll/poll01.c | 24 ++++++++++++++++++------ testcases/kernel/syscalls/poll/poll02.c | 4 ++-- 2 files changed, 20 insertions(+), 8 deletions(-)
testcases/kernel/syscalls/poll/poll01.c +18 -6
@@ -5,7 +5,7 @@* Copyright (C) 2015 Cyril Hrubis <[email protected]> */ -/* +/*\ * Check that poll() works for POLLOUT and POLLIN and that revents is set * correctly. */
@@ -34,11 +34,14 @@ static void verify_pollout(void)return ; } -if (outfds[0 ].revents !=POLLOUT ) { -tst_res (TFAIL |TTERRNO ,"poll() failed to set POLLOUT" ); +if (TST_RET !=1 ) { +tst_res (TFAIL ,"Unexpected poll() return value %ld in POLLOUT" ,TST_RET );return ; } +TST_EXP_EXPR (outfds[0 ].revents &POLLOUT ); +TST_EXP_EXPR ((outfds[0 ].revents & ~POLLOUT ) ==0 ); +tst_res (TPASS ,"poll() POLLOUT" ); }
@@ -60,11 +63,20 @@ static void verify_pollin(void) goto end; } -if (infds[0 ].revents !=POLLIN ) { -tst_res (TFAIL ,"poll() failed to set POLLIN" ); +if (TST_RET !=1 ) { +tst_res (TFAIL ,"Unexpected poll() return value %ld in POLLIN" ,TST_RET ); goto end; } +if (!(infds[0 ].revents &POLLIN )) { +tst_res (TFAIL ,"infds[0].revents & POLLIN" ); + goto end; + } + +if (!((infds[0 ].revents & ~POLLIN ) ==0 )) { +tst_res (TFAIL ,"infds[0].revents & ~POLLIN) == 0" ); + goto end; + }tst_res (TPASS ,"poll() POLLIN" );
@@ -72,7 +84,7 @@ end:SAFE_READ (1 , fildes[0 ], read_buf,sizeof (write_buf)); } -void verify_poll (unsigned int n) +static void verify_poll (unsigned int n) {switch (n) {case 0 :
testcases/kernel/syscalls/poll/poll02.c +2 -2
@@ -3,7 +3,7 @@* Copyright (C) 2015-2017 Cyril Hrubis <[email protected]> */ -/* +/*\ * Check that poll() timeouts correctly. */ #include <errno.h>
@@ -15,7 +15,7 @@static int fds[2 ]; -int sample_fn (int clk_id,long long usec) +static int sample_fn (int clk_id,long long usec) {unsigned int sleep_ms = usec /1000 ;
--
2.43.0
Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp
Hi Jinseok,
Quoted 5 lines
Remove extra blank lines, mark helper functions as static, and fix documentation comments starting with '/*\'.
Add explicit checks for
poll()return value and validate that no unexpected revents bits are set for POLLIN and POLLOUT cases.
FYI we already do check for unexpected revents bits, see below.
Quoted 11 lines
Signed-off-by Jinseok Kim <[email protected]>--- testcases/kernel/syscalls/poll/poll01.c | 24 ++++++++++++++++++------ testcases/kernel/syscalls/poll/poll02.c | 4 ++-- 2 files changed, 20 insertions(+), 8 deletions(-)testcases/kernel/syscalls/poll/poll01.c +0
-0
testcases/kernel/syscalls/poll/poll01.c line 9
Quoted 6 lines
testcases/kernel/syscalls/poll/poll01.c +1
-1@@ -5,7 +5,7 @@* Copyright (C) 2015 Cyril Hrubis <[email protected]> */ -/* +/*\ * Check that poll() works for POLLOUT and POLLIN and that revents is set
While you at it, could you please use form :manpage:poll(2)
because that links in our docs [1] into manpage [2].
[1] https://linux-test-project.readthedocs.io/en/latest/users/test_catalog.html
[2] https://man7.org/linux/man-pages/man2/poll.2.html
testcases/kernel/syscalls/poll/poll01.c static void verify_pollout(void) · line 40
Quoted 12 lines
testcases/kernel/syscalls/poll/poll01.c +2
-2* correctly. */ @@ -34,11 +34,14 @@ static void verify_pollout(void)return ; } -if (outfds[0 ].revents !=POLLOUT ) { -tst_res (TFAIL |TTERRNO ,"poll() failed to set POLLOUT" ); +if (TST_RET !=1 ) { +tst_res (TFAIL ,"Unexpected poll() return value %ld in POLLOUT" ,TST_RET );return ; }
Checking for TST_RET != 1 is probably a wanted improvement.
But how about test both with TST_EXP_VAL()?
TST_EXP_VAL(poll(outfds, 1, -1), 1); if (!TST_PASS) return;
testcases/kernel/syscalls/poll/poll01.c static void verify_pollout(void) · line 43
Quoted 2 lines
testcases/kernel/syscalls/poll/poll01.c +2
-0+TST_EXP_EXPR (outfds[0 ].revents &POLLOUT ); +TST_EXP_EXPR ((outfds[0 ].revents & ~POLLOUT ) ==0 );
This is equivalent of existing code:
if (outfds[0].revents != POLLOUT) {
tst_res(TFAIL | TTERRNO, "poll() failed to set POLLOUT");
}Maybe the message could be more precise (it also fails if revents contains POLLOUT and something else, but that might be obvious). Also it could print the actual revents value (but TST_EXP_EXPR() don't print it either).
I don't have strong opinion which variant is better.
But if you use TST_EXP_EXPR() ...
testcases/kernel/syscalls/poll/poll01.c static void verify_pollout(void) · line 45
Quoted 2 lines
testcases/kernel/syscalls/poll/poll01.c +1
-0+tst_res (TPASS ,"poll() POLLOUT" );
... then this TPASS is redundant and misleading - it would be printed also on the failure because you don't skip it on failure.
Quoted 6 lines
testcases/kernel/syscalls/poll/poll01.c +0
-0}@@ -60,11 +63,20 @@ static void verify_pollin(void) goto end; }
testcases/kernel/syscalls/poll/poll01.c static void verify_pollin(void) · line 73
Quoted 10 lines
testcases/kernel/syscalls/poll/poll01.c +5
-2-if (infds[0 ].revents !=POLLIN ) { -tst_res (TFAIL ,"poll() failed to set POLLIN" ); +if (TST_RET !=1 ) { +tst_res (TFAIL ,"Unexpected poll() return value %ld in POLLIN" ,TST_RET ); goto end; } +if (!(infds[0 ].revents &POLLIN )) { +tst_res (TFAIL ,"infds[0].revents & POLLIN" ); + goto end;
NOTE: you could use TST_EXP_EXPR():
SAFE_WRITE(SAFE_WRITE_ALL, fildes[1], write_buf, sizeof(write_buf)); TST_EXP_VAL(poll(infds, 1, -1), 1); if (!TST_PASS) goto end; TST_EXP_EXPR(infds[0].revents & POLLIN); TST_EXP_EXPR((infds[0].revents & ~POLLIN) == 0);
end:
SAFE_READ(1, fildes[0], read_buf, sizeof(write_buf));
Kind regards,
Petr
Quoted 23 lines
testcases/kernel/syscalls/poll/poll01.c +7
-1+ } + +if (!((infds[0 ].revents & ~POLLIN ) ==0 )) { +tst_res (TFAIL ,"infds[0].revents & ~POLLIN) == 0" ); + goto end; + }tst_res (TPASS ,"poll() POLLIN" );@@ -72,7 +84,7 @@ end:SAFE_READ (1 , fildes[0 ], read_buf,sizeof (write_buf)); } -void verify_poll (unsigned int n) +static void verify_poll (unsigned int n) {switch (n) {case 0 :testcases/kernel/syscalls/poll/poll02.c +0
-0
testcases/kernel/syscalls/poll/poll02.c line 7
Quoted 6 lines
testcases/kernel/syscalls/poll/poll02.c +1
-1@@ -3,7 +3,7 @@* Copyright (C) 2015-2017 Cyril Hrubis <[email protected]> */ -/* +/*\ * Check that poll() timeouts correctly.
And here please as well:
:manpage:poll(2)
Quoted 10 lines
testcases/kernel/syscalls/poll/poll02.c +1
-1*/ #include <errno.h> @@ -15,7 +15,7 @@static int fds[2 ]; -int sample_fn (int clk_id,long long usec) +static int sample_fn (int clk_id,long long usec) {unsigned int sleep_ms = usec /1000 ;
Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp
PATCH v2 1/1 poll: fix make check findings and improve poll01 validation
Remove extra blank lines, mark helper functions as static, and fix documentation comments starting with '/*\'.
Use :manpage:poll(2) in the documentation comments to link to the man page.
Add explicit checks for poll() return value and tighten revents validation for POLLIN and POLLOUT cases.
--- testcases/kernel/syscalls/poll/poll01.c | 37 ++++++++----------------- testcases/kernel/syscalls/poll/poll02.c | 6 ++-- 2 files changed, 14 insertions(+), 29 deletions(-)
testcases/kernel/syscalls/poll/poll01.c +11 -26
@@ -5,8 +5,8 @@* Copyright (C) 2015 Cyril Hrubis <[email protected]> */ -/* -* Check that poll() works for POLLOUT and POLLIN and that revents is set +/*\ +* Check that :manpage:`poll(2)` works for POLLOUT and POLLIN and that revents is set * correctly. */ #include <unistd.h>
@@ -27,19 +27,12 @@ static void verify_pollout(void) {.fd = fildes[1], .events = POLLOUT}, }; -TEST (poll (outfds,1 ,-1 )); - -if (TST_RET ==-1 ) { -tst_res (TFAIL |TTERRNO ,"poll() POLLOUT failed" ); -return ; - } - -if (outfds[0 ].revents !=POLLOUT ) { -tst_res (TFAIL |TTERRNO ,"poll() failed to set POLLOUT" ); +TST_EXP_VAL (poll (outfds,1 ,-1 ),1 ); +if (!TST_PASS )return ; - } -tst_res (TPASS ,"poll() POLLOUT" ); +TST_EXP_EXPR (outfds[0 ].revents &POLLOUT ); +TST_EXP_EXPR ((outfds[0 ].revents & ~POLLOUT ) ==0 ); }static void verify_pollin (void )
@@ -53,26 +46,18 @@ static void verify_pollin(void)SAFE_WRITE (SAFE_WRITE_ALL , fildes[1 ], write_buf,sizeof (write_buf)); -TEST (poll (infds,1 ,-1 )); - -if (TST_RET ==-1 ) { -tst_res (TFAIL |TTERRNO ,"poll() POLLIN failed" ); - goto end; - } - -if (infds[0 ].revents !=POLLIN ) { -tst_res (TFAIL ,"poll() failed to set POLLIN" ); +TST_EXP_VAL (poll (infds,1 ,-1 ),1 ); +if (!TST_PASS ) goto end; - } - -tst_res (TPASS ,"poll() POLLIN" ); +TST_EXP_EXPR (infds[0 ].revents &POLLIN ); +TST_EXP_EXPR ((infds[0 ].revents & ~POLLIN ) ==0 ); end:SAFE_READ (1 , fildes[0 ], read_buf,sizeof (write_buf)); } -void verify_poll (unsigned int n) +static void verify_poll (unsigned int n) {switch (n) {case 0 :
testcases/kernel/syscalls/poll/poll02.c +3 -3
@@ -3,8 +3,8 @@* Copyright (C) 2015-2017 Cyril Hrubis <[email protected]> */ -/* -* Check that poll() timeouts correctly. +/*\ +* Check that :manpage:`poll(2)` timeouts correctly. */ #include <errno.h> #include <fcntl.h>
@@ -15,7 +15,7 @@static int fds[2 ]; -int sample_fn (int clk_id,long long usec) +static int sample_fn (int clk_id,long long usec) {unsigned int sleep_ms = usec /1000 ;
--
2.43.0
Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp
Re: [LTP] [PATCH v2] poll: fix make check findings and improve poll01 validation
Hi Jinseok,
thanks, merged!
Kind regards,
Petr
Signature · 1 line
Mailing list info: https://lists.linux.it/listinfo/ltp