Skip to contentSkip to conversation

KVM: x86: Fix UBSAN bool warnings in module parameters

PATCH Applied Gal Pressman 3 participants 5 messages Feb 25 – Mar 5

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v2 cover KVM: x86: Fix UBSAN bool warnings in module parameters

Several KVM module parameters use int to support a special -1 (auto) value, but rely on param_get_bool() for the sysfs getter. When userspace reads these parameters before the auto value is resolved, param_get_bool() interprets the int as a bool, triggering UBSAN "load of value 255 is not a valid value for type '_Bool'" warnings.

Fix both instances by implementing getter functions that handle the -1 case before falling through to param_get_bool().

Changelog -
v1->v2: https://lore.kernel.org/all/[email protected]/
* Show auto avic as 'N' (Naveen)

Gal Pressman (2):
KVM: SVM: Fix UBSAN warning when reading avic parameter
KVM: x86/mmu: Fix UBSAN warning when reading nx_huge_pages parameter

 arch/x86/kvm/mmu/mmu.c  |  5 +++++
 arch/x86/kvm/svm/avic.c | 13 ++++++++++++-
 2 files changed, 17 insertions(+), 1 deletion(-)
Signature · 1 line
2.52.0
#1 lore raw

PATCH v2 1/2 KVM: SVM: Fix UBSAN warning when reading avic parameter

The avic parameter is stored as an int to support the special value -1 (AVIC_AUTO_MODE), but the cited commit changed it from bool to int while keeping param_get_bool() as the getter function.
This causes UBSAN to report "load of value 255 is not a valid value for type '_Bool'" when the parameter is read via sysfs.

The issue happens in two scenarios:

1. During module load: There's a time window between when module parameters are registered, and when avic_hardware_setup() runs to resolve the value, where the value is -1.

2. On non-AMD systems: On non-AMD hardware, the kvm_is_svm_supported() check returns early. The avic_hardware_setup() function never runs, so avic remains -1.

Fix that by implementing a getter function that properly reads and converts the -1 value into a string.

Triggered by sos report:

  UBSAN: invalid-load in kernel/params.c:323:33
  load of value 255 is not a valid value for type '_Bool'
  CPU: 0 UID: 0 PID: 4667 Comm: sos Not tainted 6.19.0-rc5net_mlx5_1e86836 #1 NONE
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
  Call Trace:
   <TASK>
   dump_stack_lvl+0x69/0xa0
   ubsan_epilogue+0x5/0x2b
   __ubsan_handle_load_invalid_value.cold+0x47/0x4c
   ? lock_acquire+0x219/0x2c0
   param_get_bool.cold+0xf/0x14
   param_attr_show+0x51/0x80
   module_attr_show+0x19/0x30
   sysfs_kf_seq_show+0xac/0xf0
   seq_read_iter+0x100/0x410
   copy_splice_read+0x1b4/0x360
   splice_direct_to_actor+0xbd/0x270
   ? wait_for_space+0xb0/0xb0
   do_splice_direct+0x72/0xb0
   ? propagate_umount+0x870/0x870
   do_sendfile+0x3a3/0x470
   __x64_sys_sendfile64+0x5e/0xe0
   do_syscall_64+0x70/0x8c0
   entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes ca2967de5a5b ("KVM: SVM: Enable AVIC by default for Zen4+ if x2AVIC is support")
---
 arch/x86/kvm/svm/avic.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
arch/x86/kvm/svm/avic.c +12 -1
index 0f6c8596719b..ffacd619956b 100644
@@ -19,6 +19,7 @@
 #include <linux/amd-iommu.h>
 #include <linux/kvm_host.h>
 #include <linux/kvm_irqfd.h>
+#include <linux/sysfs.h>
 
 #include <asm/irq_remapping.h>
 #include <asm/msr.h>
@@ -76,10 +77,20 @@ static int avic_param_set(const char *val, const struct kernel_param *kp)
 	return param_set_bint(val, kp);
 }
 
+static int avic_param_get(char *buffer, const struct kernel_param *kp)
+{
+	int val = *(int *)kp->arg;
+
+	if (val == AVIC_AUTO_MODE)
+		return sysfs_emit(buffer, "N\n");
+
+	return param_get_bool(buffer, kp);
+}
+
 static const struct kernel_param_ops avic_ops = {
 	.flags = KERNEL_PARAM_OPS_FL_NOARG,
 	.set = avic_param_set,
-	.get = param_get_bool,
+	.get = avic_param_get,
 };
 
 /*
Signature · 1 line
2.52.0
Reviewed-by on v2 1/2
#2 lore raw

Re: [PATCH v2 1/2] KVM: SVM: Fix UBSAN warning when reading avic parameter

Quoted 45 lines · Gal Pressman

The avic parameter is stored as an int to support the special value -1 (AVIC_AUTO_MODE), but the cited commit changed it from bool to int while keeping param_get_bool() as the getter function.
This causes UBSAN to report "load of value 255 is not a valid value for type '_Bool'" when the parameter is read via sysfs.

The issue happens in two scenarios:

1. During module load: There's a time window between when module parameters are registered, and when avic_hardware_setup() runs to resolve the value, where the value is -1.

2. On non-AMD systems: On non-AMD hardware, the kvm_is_svm_supported() check returns early. The avic_hardware_setup() function never runs, so avic remains -1.

Fix that by implementing a getter function that properly reads and converts the -1 value into a string.

Triggered by sos report:

  UBSAN: invalid-load in kernel/params.c:323:33
  load of value 255 is not a valid value for type '_Bool'
  CPU: 0 UID: 0 PID: 4667 Comm: sos Not tainted 6.19.0-rc5net_mlx5_1e86836 #1 NONE
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
  Call Trace:
   <TASK>
   dump_stack_lvl+0x69/0xa0
   ubsan_epilogue+0x5/0x2b
   __ubsan_handle_load_invalid_value.cold+0x47/0x4c
   ? lock_acquire+0x219/0x2c0
   param_get_bool.cold+0xf/0x14
   param_attr_show+0x51/0x80
   module_attr_show+0x19/0x30
   sysfs_kf_seq_show+0xac/0xf0
   seq_read_iter+0x100/0x410
   copy_splice_read+0x1b4/0x360
   splice_direct_to_actor+0xbd/0x270
   ? wait_for_space+0xb0/0xb0
   do_splice_direct+0x72/0xb0
   ? propagate_umount+0x870/0x870
   do_sendfile+0x3a3/0x470
   __x64_sys_sendfile64+0x5e/0xe0
   do_syscall_64+0x70/0x8c0
   entry_SYSCALL_64_after_hwframe+0x4b/0x53
Quoted 6 lines
Fixes ca2967de5a5b ("KVM: SVM: Enable AVIC by default for Zen4+ if x2AVIC is support")
---
 arch/x86/kvm/svm/avic.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

LGTM.

- Naveen

#3 lore raw

PATCH v2 2/2 KVM: x86/mmu: Fix UBSAN warning when reading nx_huge_pages parameter

In reply to Gal Pressman

The nx_huge_pages parameter is stored as an int (initialized to -1 to indicate auto mode), but get_nx_huge_pages() calls param_get_bool() which expects a bool pointer.
This causes UBSAN to report "load of value 255 is not a valid value for type '_Bool'" when the parameter is read via sysfs during a narrow time window.

The issue occurs during module load: the module parameter is registered and its sysfs file becomes readable before the kvm_mmu_x86_module_init() function runs:

1. Module load begins, static variable initialized to -1
2. mod_sysfs_setup() creates /sys/module/kvm/parameters/nx_huge_pages
3. (Parameter readable, value = -1)
4. do_init_module() runs kvm_x86_init()
5. kvm_mmu_x86_module_init() resolves -1 to bool

If userspace (e.g., sos report) reads the parameter during step 3, param_get_bool() dereferences the int as a bool, triggering the UBSAN warning.

Fix that by properly reading and converting the -1 value into an 'auto' string.

Fixes b8e8c8303ff2 ("kvm: mmu: ITLB_MULTIHIT mitigation")
---
 arch/x86/kvm/mmu/mmu.c | 5 +++++
 1 file changed, 5 insertions(+)
arch/x86/kvm/mmu/mmu.c +5 -0
index 02c450686b4a..3644d1db8be1 100644
@@ -7488,9 +7488,14 @@ static void kvm_wake_nx_recovery_thread(struct kvm *kvm)
 
 static int get_nx_huge_pages(char *buffer, const struct kernel_param *kp)
 {
+	int val = *(int *)kp->arg;
+
 	if (nx_hugepage_mitigation_hard_disabled)
 		return sysfs_emit(buffer, "never\n");
 
+	if (val == -1)
+		return sysfs_emit(buffer, "auto\n");
+
 	return param_get_bool(buffer, kp);
 }
 
Signature · 1 line
2.52.0
maintainer Applied
#4 lore raw
In reply to Gal Pressman
Quoted 10 lines · Gal Pressman

Several KVM module parameters use int to support a special -1 (auto) value, but rely on param_get_bool() for the sysfs getter. When userspace reads these parameters before the auto value is resolved, param_get_bool() interprets the int as a bool, triggering UBSAN "load of value 255 is not a valid value for type '_Bool'" warnings.

Fix both instances by implementing getter functions that handle the -1 case before falling through to param_get_bool().

[...]

Applied patch 1 to kvm-x86 svm, and patch 2 to kvm-x86 mmu. Thanks!

[1/2] KVM: SVM: Fix UBSAN warning when reading avic parameter

      https://github.com/kvm-x86/linux/commit/2b1a59f7ef96
[2/2] KVM: x86/mmu: Fix UBSAN warning when reading nx_huge_pages parameter
      https://github.com/kvm-x86/linux/commit/1450ab08108c

--
https://github.com/kvm-x86/linux/tree/next