Skip to contentSkip to conversation

staging: iio: ad7816: Replace sprintf with sysfs_emit

PATCH In review Bruno Martins 2 participants 2 messages Mar 1 – Mar 2

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 staging: iio: ad7816: Replace sprintf with sysfs_emit

As stated in Documentation/filesystems/sysfs.rst:
'New implementations of show() methods should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space.'

Replace sprintf with sysfs_emit in the following sysfs show functions:
- ad7816_show_mode()
- ad7816_show_available_modes()
- ad7816_show_channel()
- ad7816_show_value()
- ad7816_show_oti()

---
 drivers/staging/iio/adc/ad7816.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
drivers/staging/iio/adc/ad7816.c +8 -8
index 172acf135f3b..0e32a2295990 100644
@@ -124,8 +124,8 @@ static ssize_t ad7816_show_mode(struct device *dev,
 	struct ad7816_chip_info *chip = iio_priv(indio_dev);
 
 	if (chip->mode)
-		return sprintf(buf, "power-save\n");
-	return sprintf(buf, "full\n");
+		return sysfs_emit(buf, "power-save\n");
+	return sysfs_emit(buf, "full\n");
 }
 
 static ssize_t ad7816_store_mode(struct device *dev,
@@ -156,7 +156,7 @@ static ssize_t ad7816_show_available_modes(struct device *dev,
 					   struct device_attribute *attr,
 					   char *buf)
 {
-	return sprintf(buf, "full\npower-save\n");
+	return sysfs_emit(buf, "full\npower-save\n");
 }
 
 static IIO_DEVICE_ATTR(available_modes, 0444, ad7816_show_available_modes,
@@ -169,7 +169,7 @@ static ssize_t ad7816_show_channel(struct device *dev,
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7816_chip_info *chip = iio_priv(indio_dev);
 
-	return sprintf(buf, "%d\n", chip->channel_id);
+	return sysfs_emit(buf, "%d\n", chip->channel_id);
 }
 
 static ssize_t ad7816_store_channel(struct device *dev,
@@ -231,9 +231,9 @@ static ssize_t ad7816_show_value(struct device *dev,
 		data &= AD7816_TEMP_FLOAT_MASK;
 		if (value < 0)
 			data = BIT(AD7816_TEMP_FLOAT_OFFSET) - data;
-		return sprintf(buf, "%d.%.2d\n", value, data * 25);
+		return sysfs_emit(buf, "%d.%.2d\n", value, data * 25);
 	}
-	return sprintf(buf, "%u\n", data);
+	return sysfs_emit(buf, "%u\n", data);
 }
 
 static IIO_DEVICE_ATTR(value, 0444, ad7816_show_value, NULL, 0);
@@ -281,9 +281,9 @@ static ssize_t ad7816_show_oti(struct device *dev,
 		value = AD7816_BOUND_VALUE_MIN +
 			(chip->oti_data[chip->channel_id] -
 			AD7816_BOUND_VALUE_BASE);
-		return sprintf(buf, "%d\n", value);
+		return sysfs_emit(buf, "%d\n", value);
 	}
-	return sprintf(buf, "%u\n", chip->oti_data[chip->channel_id]);
+	return sysfs_emit(buf, "%u\n", chip->oti_data[chip->channel_id]);
 }
 
 static inline ssize_t ad7816_set_oti(struct device *dev,
Signature · 1 line
2.47.3
maintainer
#1 lore raw
Quoted 4 lines · On Sun, 01 Mar 2026 21:28:26 +0000 Bruno Martins <[email protected]> wrote:

As stated in Documentation/filesystems/sysfs.rst:
'New implementations of show() methods should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space.'

Quoted 8 lines

Replace sprintf with sysfs_emit in the following sysfs show functions:
- ad7816_show_mode()
- ad7816_show_available_modes()
- ad7816_show_channel()
- ad7816_show_value()
- ad7816_show_oti()

Hi Bruno,

I've applied this but want to note that the majority if not all of these are non standard ABI that will ultimately need to be replaced with standard IIO ABI as part of getting this driver ready to move out of staging.

Still, in the meantime your patch removes some bad practice that might get copied so fair enough!

Applied to the testing branch of iio.git which will become togreg once the bots have let me know if they found anything.

Jonathan

Quoted 61 lines
---
 drivers/staging/iio/adc/ad7816.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
drivers/staging/iio/adc/ad7816.c +8 -8
index 172acf135f3b..0e32a2295990 100644
@@ -124,8 +124,8 @@ static ssize_t ad7816_show_mode(struct device *dev,
 	struct ad7816_chip_info *chip = iio_priv(indio_dev);
 
 	if (chip->mode)
-		return sprintf(buf, "power-save\n");
-	return sprintf(buf, "full\n");
+		return sysfs_emit(buf, "power-save\n");
+	return sysfs_emit(buf, "full\n");
 }
 
 static ssize_t ad7816_store_mode(struct device *dev,
@@ -156,7 +156,7 @@ static ssize_t ad7816_show_available_modes(struct device *dev,
 					   struct device_attribute *attr,
 					   char *buf)
 {
-	return sprintf(buf, "full\npower-save\n");
+	return sysfs_emit(buf, "full\npower-save\n");
 }
 
 static IIO_DEVICE_ATTR(available_modes, 0444, ad7816_show_available_modes,
@@ -169,7 +169,7 @@ static ssize_t ad7816_show_channel(struct device *dev,
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7816_chip_info *chip = iio_priv(indio_dev);
 
-	return sprintf(buf, "%d\n", chip->channel_id);
+	return sysfs_emit(buf, "%d\n", chip->channel_id);
 }
 
 static ssize_t ad7816_store_channel(struct device *dev,
@@ -231,9 +231,9 @@ static ssize_t ad7816_show_value(struct device *dev,
 		data &= AD7816_TEMP_FLOAT_MASK;
 		if (value < 0)
 			data = BIT(AD7816_TEMP_FLOAT_OFFSET) - data;
-		return sprintf(buf, "%d.%.2d\n", value, data * 25);
+		return sysfs_emit(buf, "%d.%.2d\n", value, data * 25);
 	}
-	return sprintf(buf, "%u\n", data);
+	return sysfs_emit(buf, "%u\n", data);
 }
 
 static IIO_DEVICE_ATTR(value, 0444, ad7816_show_value, NULL, 0);
@@ -281,9 +281,9 @@ static ssize_t ad7816_show_oti(struct device *dev,
 		value = AD7816_BOUND_VALUE_MIN +
 			(chip->oti_data[chip->channel_id] -
 			AD7816_BOUND_VALUE_BASE);
-		return sprintf(buf, "%d\n", value);
+		return sysfs_emit(buf, "%d\n", value);
 	}
-	return sprintf(buf, "%u\n", chip->oti_data[chip->channel_id]);
+	return sysfs_emit(buf, "%u\n", chip->oti_data[chip->channel_id]);
 }
 
 static inline ssize_t ad7816_set_oti(struct device *dev,