Skip to contentSkip to conversation

clk: qcom: dispcc-sm8250: use shared ops on the mdss vsync clk

RFC PATCH New Val Packett 1 participant 1 message Mar 7

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

RFC PATCH 1/1 clk: qcom: dispcc-sm8250: use shared ops on the mdss vsync clk

mdss_gdsc can get stuck on boot due to RCGs being left on from last boot. As a fix, commit 01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration") introduced a callback to ensure the RCG is off upon init. However, the fix depends on all shared RCGs being marked as such in code.

For SM8150/SC8180X/SM8250 the MDSS vsync clock was using regular ops, unlike the same clock in the SC7180 code. This was causing display to frequently fail to initialize after rebooting on the Surface Pro X. Fix by using shared ops for this clock.

Fixes 80a18f4a8567 ("clk: qcom: Add display clock controller driver for SM8150 and SM8250")

---
This seems to help with the "mdss_gdsc status stuck at 'off'" issue on the Surface Pro X
(https://github.com/linux-surface/surface-pro-x/issues/51), at least I've just rebooted like 8 times in a row (with this applied and without removing the panel enable GPIO) and it's working fine, initialized every time.

I'm still kinda doubting myself though because I *only* saw it use shared ops on sc7180, but not on *every* other SoC. What's up with that? o.0

Thanks,
~val

---
 drivers/clk/qcom/dispcc-sm8250.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/qcom/dispcc-sm8250.c +1 -1
index 8f433e1e7028..cdfdb2cfb02b 100644
@@ -632,7 +632,7 @@ static struct clk_rcg2 disp_cc_mdss_vsync_clk_src = {
 		.parent_data = disp_cc_parent_data_1,
 		.num_parents = ARRAY_SIZE(disp_cc_parent_data_1),
 		.flags = CLK_SET_RATE_PARENT,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_shared_ops,
 	},
 };
 
Signature · 1 line
2.52.0