ASoC: Intel: catpt: Overhaul volume and mute control operations
Subsystems (3)
Cezary Rojewski
maintainercover ASoC: Intel: catpt: Overhaul volume and mute control operations
Short summary first, longer description later:
- fix the return code for kctl->put() - currently the driver returns '0' even if changes were done
- lower power consumption for kctl operations by waking the DSP only when some streaming is done. No streaming? Cache the values and inform the AudioDSP firmware later.
- drop the existing code duplication between individual and master volume controls
The very first patch addresses synchronization problem that exists when an individual control and its paired stream are manipulated by a user simultaneously. As the refactor integrates the fix in its new code, most of it gets shuffled but in case of a "refactor problem" I've decided to have it separated and leading the series. This way the problem is fixed even if refactor, for whatever reason, would be reverted.
--
More of in-depth explanation for the refactor, taken from commit 2:
The catpt-driver's volume and mute control operations always return '0' regardless if a change occurred or not. To conform to ALSA's interface, value '1' shall be returned when a change occurred.
The second major point is power consumption. Existing control operations always wake the DSP even if no streams are running. In such case waking the DSP just for the sake of updating the volume (or mute) settings on the firmware side is a waste of power. The provided implementation caches the values and updates the settings only when streams are being opened for streaming or are already running.
As changing existing code is non-trivial, provide new operations instead. The put() operation, which interests us the most, takes the following shape:
// two values provided to put():
// @pin_id - which stream given control relates to
// @value_to_apply - the value from user
if (control->existing_val == value_to_apply)
return 0;
runtime_stream = get_running_stream(pin_id);
if (runtime_stream != NULL) {
ret = send_ipc();
if (ret)
return ret;
}
control->existing_val = value_to_apply;
return 1;Adheres to ALSA's expectation and avoids sending IPCs if there is no change to be made.
Cezary Rojewski (5):
ASoC: Intel: catpt: Synchronize stream access
ASoC: Intel: catpt: New volume and mute control operations
ASoC: Intel: catpt: Simplify procedure of applying user settings
ASoC: Intel: catpt: Do not wake DSP just for volume setup
ASoC: Intel: catpt: Migrate to the new control operations
sound/soc/intel/catpt/core.h | 2 +- sound/soc/intel/catpt/device.c | 2 +- sound/soc/intel/catpt/ipc.c | 3 + sound/soc/intel/catpt/loader.c | 2 + sound/soc/intel/catpt/messages.h | 3 + sound/soc/intel/catpt/pcm.c | 394 +++++++++++++------------------ 6 files changed, 174 insertions(+), 232 deletions(-)
Signature · 1 line
2.34.1
Cezary Rojewski
maintainerPATCH 1/5 ASoC: Intel: catpt: Synchronize stream access
Streams may have individual controls assigned to them e.g.: volume control in case of offload streams.
If such a stream is running and simultaneously its controls are being manipulated, both processes are touching the exact same descriptors - access to these must be synchronized. Replace spinlock with mutex as IPCs are non-atomic operations and add proper locking for all ->stream_list users.
--- sound/soc/intel/catpt/core.h | 2 +- sound/soc/intel/catpt/device.c | 2 +- sound/soc/intel/catpt/ipc.c | 3 +++ sound/soc/intel/catpt/loader.c | 2 ++ sound/soc/intel/catpt/pcm.c | 25 +++++++++++++++---------- 5 files changed, 22 insertions(+), 12 deletions(-)
sound/soc/intel/catpt/core.h +1 -1
@@ -96,7 +96,7 @@ struct catpt_dev {struct catpt_module_type modules[CATPT_MODULE_COUNT ];struct catpt_ssp_device_format devfmt[CATPT_SSP_COUNT ];struct list_head stream_list; -spinlock_t list_lock; +struct mutex stream_mutex;struct mutex clk_mutex;struct catpt_dx_context dx_ctx;
sound/soc/intel/catpt/device.c +1 -1
@@ -226,7 +226,7 @@ static void catpt_dev_init(struct catpt_dev *cdev, struct device *dev, cdev->spec = spec;init_completion (&cdev->fw_ready);INIT_LIST_HEAD (&cdev->stream_list); -spin_lock_init (&cdev->list_lock); +mutex_init (&cdev->stream_mutex);mutex_init (&cdev->clk_mutex);/*
sound/soc/intel/catpt/ipc.c +3 -0
@@ -5,6 +5,7 @@// Author: Cezary Rojewski <[email protected]> // +#include <linux/cleanup.h> #include <linux/irqreturn.h> #include "core.h" #include "messages.h"
@@ -151,6 +152,8 @@ catpt_dsp_notify_stream(struct catpt_dev *cdev, union catpt_notify_msg msg)struct catpt_notify_position pos;struct catpt_notify_glitch glitch; +guard (mutex)(&cdev->stream_mutex); + stream =catpt_stream_find (cdev, msg.stream_hw_id);if (!stream) { dev_warn(cdev->dev, "notify %d for non-existent stream %d\n",
sound/soc/intel/catpt/loader.c +2 -0
@@ -90,6 +90,7 @@ int catpt_store_streams_context(struct catpt_dev *cdev, struct dma_chan *chan) {struct catpt_stream_runtime *stream; +/* Lockless as no streams can be added or removed during D3 -> D0 transition. */ list_for_each_entry (stream, &cdev->stream_list, node) {u32 off, size;int ret;
@@ -180,6 +181,7 @@ catpt_restore_streams_context(struct catpt_dev *cdev, struct dma_chan *chan) {struct catpt_stream_runtime *stream; +/* Lockless as no streams can be added or removed during D3 -> D0 transition. */ list_for_each_entry (stream, &cdev->stream_list, node) {u32 off, size;int ret;
sound/soc/intel/catpt/pcm.c +15 -10
@@ -5,6 +5,7 @@// Author: Cezary Rojewski <[email protected]> // +#include <linux/cleanup.h> #include <linux/pm_runtime.h> #include <sound/soc.h> #include <sound/pcm_params.h>
@@ -97,12 +98,12 @@ catpt_get_stream_template(struct snd_pcm_substream *substream)return catpt_topology[type]; } +/* Caller responsible for holding ->stream_mutex. */ struct catpt_stream_runtime *catpt_stream_find (struct catpt_dev *cdev,u8 stream_hw_id) {struct catpt_stream_runtime *pos, *result =NULL ; -spin_lock (&cdev->list_lock);list_for_each_entry (pos, &cdev->stream_list, node) {if (pos->info.stream_hw_id == stream_hw_id) { result = pos;
@@ -110,7 +111,6 @@ catpt_stream_find(struct catpt_dev *cdev, u8 stream_hw_id) } } -spin_unlock (&cdev->list_lock);return result; }
@@ -286,10 +286,6 @@ static int catpt_dai_startup(struct snd_pcm_substream *substream,INIT_LIST_HEAD (&stream->node);snd_soc_dai_set_dma_data (dai, substream, stream); -spin_lock (&cdev->list_lock); -list_add_tail (&stream->node, &cdev->stream_list); -spin_unlock (&cdev->list_lock); -return 0 ; err_request:
@@ -307,10 +303,6 @@ static void catpt_dai_shutdown(struct snd_pcm_substream *substream, stream =snd_soc_dai_get_dma_data (dai, substream); -spin_lock (&cdev->list_lock); -list_del (&stream->node); -spin_unlock (&cdev->list_lock); -release_resource (stream->persistent);kfree (stream->persistent);catpt_dsp_update_srampge (cdev, &cdev->dram, cdev->spec->dram_mask);
@@ -410,12 +402,15 @@ static int catpt_dai_hw_params(struct snd_pcm_substream *substream,if (ret)return CATPT_IPC_RET (ret); +guard (mutex)(&cdev->stream_mutex); + ret =catpt_dai_apply_usettings (dai, stream);if (ret) {catpt_ipc_free_stream (cdev, stream->info.stream_hw_id);return ret; } +list_add_tail (&stream->node, &cdev->stream_list); stream->allocated = true;return 0 ; }
@@ -430,6 +425,10 @@ static int catpt_dai_hw_free(struct snd_pcm_substream *substream,if (!stream->allocated)return 0 ; +mutex_lock (&cdev->stream_mutex); +list_del (&stream->node); +mutex_unlock (&cdev->stream_mutex); +catpt_ipc_reset_stream (cdev, stream->info.stream_hw_id);catpt_ipc_free_stream (cdev, stream->info.stream_hw_id);
@@ -910,6 +909,8 @@ static int catpt_stream_volume_get(struct snd_kcontrol *kcontrol,int ret;int i; +guard (mutex)(&cdev->stream_mutex); + stream =catpt_stream_find (cdev, pin_id);if (!stream) {for (i =0 ; i <CATPT_CHANNELS_MAX ; i++)
@@ -941,6 +942,8 @@ static int catpt_stream_volume_put(struct snd_kcontrol *kcontrol,long *ctlvol = (long *)kcontrol->private_value;int ret, i; +guard (mutex)(&cdev->stream_mutex); + stream =catpt_stream_find (cdev, pin_id);if (!stream) {for (i =0 ; i <CATPT_CHANNELS_MAX ; i++)
@@ -1017,6 +1020,8 @@ static int catpt_loopback_switch_put(struct snd_kcontrol *kcontrol,bool mute;int ret; +guard (mutex)(&cdev->stream_mutex); + mute = (bool )ucontrol->value.integer.value[0 ]; stream =catpt_stream_find (cdev,CATPT_PIN_ID_REFERENCE );if (!stream) {
Signature · 1 line
2.34.1
Cezary Rojewski
maintainerPATCH 2/5 ASoC: Intel: catpt: New volume and mute control operations
In reply to Cezary RojewskiThe catpt-driver's volume and mute control operations always return '0' regardless if a change occurred or not. To conform to ALSA's interface, value '1' shall be returned when a change occurred.
The second major point is power consumption. Existing control operations always wake the DSP even if no streams are running. In such case waking the DSP just for the sake of updating the volume (or mute) settings on the firmware side is a waste of power. The provided implementation caches the values and updates the settings only when streams are being opened for streaming or are already running.
As changing existing code is non-trivial, provide new operations instead. The put() operation, which interests us the most, takes the following shape:
// two values provided to put():
// pin_id - which stream given control relates to
// value_to_apply - the value from user
if (control->existing_val == value_to_apply)
return 0;
runtime_stream = get_running_stream(pin_id);
if (runtime_stream != NULL) {
ret = send_ipc();
if (ret)
return ret;
}
control->existing_val = value_to_apply;
return 1;Adheres to ALSA's expectation and avoids sending IPCs if there is no change to be made.
Two helpers which are part of the patch, catpt_stream_hw_id() and catpt_stream_volume_regs(), help differentiate between individual streams and the general MIXER stream. Translates to one pair of get()/put() instead of two pairs as done currently.
PIN_ID_INVALID is returned if given stream is not currently running - the constant is part of the firmware's API but remained unused by the driver.
--- sound/soc/intel/catpt/messages.h | 3 + sound/soc/intel/catpt/pcm.c | 149 +++++++++++++++++++++++++++++++ 2 files changed, 152 insertions(+)
sound/soc/intel/catpt/messages.h +3 -0
@@ -69,6 +69,7 @@ struct catpt_fw_version {int catpt_ipc_get_fw_version (struct catpt_dev *cdev,struct catpt_fw_version *version); +/* PIN_IDs represent both, individual streams and the general mixer. */ enum catpt_pin_id {CATPT_PIN_ID_SYSTEM =0 ,CATPT_PIN_ID_REFERENCE =1 ,
@@ -79,6 +80,8 @@ enum catpt_pin_id {CATPT_PIN_ID_MIXER =7 ,CATPT_PIN_ID_BLUETOOTH_CAPTURE =8 ,CATPT_PIN_ID_BLUETOOTH_RENDER =9 , +/* 10 is reserved */ + CATPT_PIN_ID_INVALID = 11, }; enum catpt_path_id {
sound/soc/intel/catpt/pcm.c +149 -0
173 lines not on this page · raw message
Signature · 1 line
2.34.1
Cezary Rojewski
maintainerPATCH 3/5 ASoC: Intel: catpt: Simplify procedure of applying user settings
In reply to Cezary RojewskiExisting catpt_dai_apply_usettings() applies all the individual control settings but why-what is covered behind if-statements. Refactor the operation into:
catpt_apply_controls()
|__ catpt_apply_volume()
|__ catpt_apply_mute()
to make it easy to understand why and what is going on. The update also enlists snd_ctl_find_id_mixer() for the query purpose, removing code duplication.
--- sound/soc/intel/catpt/pcm.c | 64 +++++++++++++++++++------------------ 1 file changed, 33 insertions(+), 31 deletions(-)
sound/soc/intel/catpt/pcm.c +33 -31
@@ -359,46 +359,48 @@ struct catpt_control_data {long volumes[CATPT_CHANNELS_MAX ]; }; -static int catpt_dai_apply_usettings (struct snd_soc_dai *dai, -struct catpt_stream_runtime *stream) +static int catpt_apply_volume (struct catpt_dev *cdev,struct snd_soc_card *card,const char *name) { -struct snd_soc_component *component = dai->component; -struct snd_kcontrol *pos; -struct catpt_dev *cdev =dev_get_drvdata (dai->dev); -const char *name; +struct snd_kcontrol *kctl =snd_ctl_find_id_mixer (card->snd_card, name); +struct catpt_control_data *data; + +if (!kctl) +return -ENOENT ; + data = (struct catpt_control_data *)kctl->private_value; + +return catpt_set_dspvol (cdev, data->pin_id, data->volumes); +} + +static int catpt_apply_mute (struct catpt_dev *cdev,struct snd_soc_card *card) +{ +struct snd_kcontrol *kctl =snd_ctl_find_id_mixer (card->snd_card,"Loopback Mute" ); +bool mute;int ret; -u32 id = stream->info.stream_hw_id; -/* only selected streams have individual controls */ -switch (id) { +if (!kctl) +return -ENOENT ; + mute = *(bool *)kctl->private_value; + + ret =catpt_ipc_mute_loopback (cdev,CATPT_PIN_ID_REFERENCE , mute); +return CATPT_IPC_RET (ret); +} + +static int catpt_apply_controls (struct catpt_dev *cdev,struct snd_soc_card *card, +struct catpt_stream_runtime *stream) +{ +/* Only selected streams have individual controls. */ +switch (stream->info.stream_hw_id) {case CATPT_PIN_ID_OFFLOAD1 : - name ="Media0 Playback Volume" ; -break ; +return catpt_apply_volume (cdev, card,"Media0 Playback Volume" );case CATPT_PIN_ID_OFFLOAD2 : - name ="Media1 Playback Volume" ; -break ; +return catpt_apply_volume (cdev, card,"Media1 Playback Volume" );case CATPT_PIN_ID_CAPTURE1 : - name ="Mic Capture Volume" ; -break ; +return catpt_apply_volume (cdev, card,"Mic Capture Volume" );case CATPT_PIN_ID_REFERENCE : - name ="Loopback Mute" ; -break ; +return catpt_apply_mute (cdev, card);default :return 0 ; } - -list_for_each_entry (pos, &component->card->snd_card->controls, list) { -if (pos->private_data == component && - !strncmp (name, pos->id.name,sizeof (pos->id.name))) -break ; - } -if (list_entry_is_head (pos, &component->card->snd_card->controls, list)) -return -ENOENT ; - -if (stream->template->type !=CATPT_STRM_TYPE_LOOPBACK ) -return catpt_set_dspvol (cdev, id, (long *)pos->private_value); - ret =catpt_ipc_mute_loopback (cdev, id, *(bool *)pos->private_value); -return CATPT_IPC_RET (ret); } static int catpt_dai_hw_params(struct snd_pcm_substream *substream,
@@ -449,7 +451,7 @@ static int catpt_dai_hw_params(struct snd_pcm_substream *substream,guard (mutex)(&cdev->stream_mutex); - ret =catpt_dai_apply_usettings (dai, stream); + ret =catpt_apply_controls (cdev, dai->component->card, stream);if (ret) {catpt_ipc_free_stream (cdev, stream->info.stream_hw_id);return ret;
Signature · 1 line
2.34.1
Cezary Rojewski
maintainerPATCH 4/5 ASoC: Intel: catpt: Do not wake DSP just for volume setup
In reply to Cezary RojewskiWith the new control-operations in place, the controls no longer wake the DSP just for the sake of updating volume (or mute) settings on the firmware side. The values are cached and actual update occurs only when streams are being opened for streaming or are already running. In those cases the DSP must already be woken up and we avoid unnecessary power consumption.
--- sound/soc/intel/catpt/pcm.c | 9 +++++++++ 1 file changed, 9 insertions(+)
sound/soc/intel/catpt/pcm.c +9 -0
@@ -388,6 +388,15 @@ static int catpt_apply_mute(struct catpt_dev *cdev, struct snd_soc_card *card)static int catpt_apply_controls (struct catpt_dev *cdev,struct snd_soc_card *card,struct catpt_stream_runtime *stream) { +int ret; + +/* Update the master volume when the first stream is opened. */ +if (list_empty (&cdev->stream_list)) { + ret =catpt_apply_volume (cdev, card,"Master Playback Volume" ); +if (ret) +return ret; + } +/* Only selected streams have individual controls. */ switch (stream->info.stream_hw_id) {case CATPT_PIN_ID_OFFLOAD1 :
Signature · 1 line
2.34.1
Cezary Rojewski
maintainerPATCH 5/5 ASoC: Intel: catpt: Migrate to the new control operations
In reply to Cezary RojewskiSwitch to the new implementation and remove all unused code. The change effectively causes the control put() operations to return '1' if a change occurred, '0' if no change was made or error otherwise.
The second effect of the update is reducing the power consumption. With the new control-operations in place, the controls no longer wake the DSP just for the sake of updating volume (or mute) settings on the firmware side. The values are cached and actual update occurs only when streams are being opened for streaming or are already running.
--- sound/soc/intel/catpt/pcm.c | 243 +----------------------------------- 1 file changed, 6 insertions(+), 237 deletions(-)
sound/soc/intel/catpt/pcm.c +6 -237
@@ -160,32 +160,6 @@ static void catpt_stream_read_position(struct catpt_dev *cdev,memcpy_fromio (pos, cdev->lpe_ba + stream->info.read_pos_regaddr,sizeof (*pos)); } -static u32 catpt_stream_volume (struct catpt_dev *cdev, -struct catpt_stream_runtime *stream,u32 channel) -{ -u32 volume, offset; - -if (channel >=CATPT_CHANNELS_MAX ) - channel =0 ; - - offset = stream->info.volume_regaddr[channel]; -memcpy_fromio (&volume, cdev->lpe_ba + offset,sizeof (volume)); -return volume; -} - -static u32 catpt_mixer_volume (struct catpt_dev *cdev, -struct catpt_mixer_stream_info *info,u32 channel) -{ -u32 volume, offset; - -if (channel >=CATPT_CHANNELS_MAX ) - channel =0 ; - - offset = info->volume_regaddr[channel]; -memcpy_fromio (&volume, cdev->lpe_ba + offset,sizeof (volume)); -return volume; -} -static void catpt_arrange_page_table (struct snd_pcm_substream *substream,struct snd_dma_buffer *pgtbl) {
@@ -911,7 +885,6 @@ static int catpt_volume_info(struct snd_kcontrol *kcontrol,return 0 ; } -__maybe_unused static int catpt_volume_get (struct snd_kcontrol *kctl,struct snd_ctl_elem_value *uctl) {struct snd_soc_component *component =snd_kcontrol_chip (kctl);
@@ -938,7 +911,6 @@ static int catpt_volume_get(struct snd_kcontrol *kctl, struct snd_ctl_elem_valuereturn 0 ; } -__maybe_unused static int catpt_volume_put (struct snd_kcontrol *kctl,struct snd_ctl_elem_value *uctl) {struct snd_soc_component *component =snd_kcontrol_chip (kctl);
@@ -967,14 +939,12 @@ static int catpt_volume_put(struct snd_kcontrol *kctl, struct snd_ctl_elem_valuereturn 1 ; } -__maybe_unused static int catpt_loopback_mute_get (struct snd_kcontrol *kctl,struct snd_ctl_elem_value *uctl) { uctl->value.integer.value[0 ] = *(bool *)kctl->private_value;return 0 ; } -__maybe_unused static int catpt_loopback_mute_put (struct snd_kcontrol *kctl,struct snd_ctl_elem_value *uctl) {struct snd_soc_component *component =snd_kcontrol_chip (kctl);
@@ -1002,195 +972,6 @@ static int catpt_loopback_mute_put(struct snd_kcontrol *kctl, struct snd_ctl_elereturn 1 ; } -static int catpt_mixer_volume_get (struct snd_kcontrol *kcontrol, -struct snd_ctl_elem_value *ucontrol) -{ -struct snd_soc_component *component =snd_kcontrol_chip (kcontrol); -struct catpt_dev *cdev =dev_get_drvdata (component->dev); -u32 dspvol; -int ret; -int i; - - ret =pm_runtime_resume_and_get (cdev->dev); -if (ret) -return ret; - -for (i =0 ; i <CATPT_CHANNELS_MAX ; i++) { - dspvol =catpt_mixer_volume (cdev, &cdev->mixer, i); - ucontrol->value.integer.value[i] =dspvol_to_ctlvol (dspvol); - } - -pm_runtime_put_autosuspend (cdev->dev); - -return 0 ; -} - -static int catpt_mixer_volume_put (struct snd_kcontrol *kcontrol, -struct snd_ctl_elem_value *ucontrol) -{ -struct snd_soc_component *component =snd_kcontrol_chip (kcontrol); -struct catpt_dev *cdev =dev_get_drvdata (component->dev); -int ret; - - ret =pm_runtime_resume_and_get (cdev->dev); -if (ret) -return ret; - - ret =catpt_set_dspvol (cdev, cdev->mixer.mixer_hw_id, - ucontrol->value.integer.value); - -pm_runtime_put_autosuspend (cdev->dev); - -return ret; -} - -static int catpt_stream_volume_get (struct snd_kcontrol *kcontrol, -struct snd_ctl_elem_value *ucontrol, -enum catpt_pin_id pin_id) -{ -struct snd_soc_component *component =snd_kcontrol_chip (kcontrol); -struct catpt_stream_runtime *stream; -struct catpt_dev *cdev =dev_get_drvdata (component->dev); -long *ctlvol = (long *)kcontrol->private_value; -u32 dspvol; -int ret; -int i; - -guard (mutex)(&cdev->stream_mutex); - - stream =catpt_stream_find (cdev, pin_id); -if (!stream) { -for (i =0 ; i <CATPT_CHANNELS_MAX ; i++) - ucontrol->value.integer.value[i] = ctlvol[i]; -return 0 ; - } - - ret =pm_runtime_resume_and_get (cdev->dev); -if (ret) -return ret; - -for (i =0 ; i <CATPT_CHANNELS_MAX ; i++) { - dspvol =catpt_stream_volume (cdev, stream, i); - ucontrol->value.integer.value[i] =dspvol_to_ctlvol (dspvol); - } - -pm_runtime_put_autosuspend (cdev->dev); - -return 0 ; -} - -static int catpt_stream_volume_put (struct snd_kcontrol *kcontrol, -struct snd_ctl_elem_value *ucontrol, -enum catpt_pin_id pin_id) -{ -struct snd_soc_component *component =snd_kcontrol_chip (kcontrol); -struct catpt_stream_runtime *stream; -struct catpt_dev *cdev =dev_get_drvdata (component->dev); -long *ctlvol = (long *)kcontrol->private_value; -int ret, i; - -guard (mutex)(&cdev->stream_mutex); - - stream =catpt_stream_find (cdev, pin_id); -if (!stream) { -for (i =0 ; i <CATPT_CHANNELS_MAX ; i++) - ctlvol[i] = ucontrol->value.integer.value[i]; -return 0 ; - } - - ret =pm_runtime_resume_and_get (cdev->dev); -if (ret) -return ret; - - ret =catpt_set_dspvol (cdev, stream->info.stream_hw_id, - ucontrol->value.integer.value); - -pm_runtime_put_autosuspend (cdev->dev); - -if (ret) -return ret; - -for (i =0 ; i <CATPT_CHANNELS_MAX ; i++) - ctlvol[i] = ucontrol->value.integer.value[i]; -return 0 ; -} - -static int catpt_offload1_volume_get (struct snd_kcontrol *kctl, -struct snd_ctl_elem_value *uctl) -{ -return catpt_stream_volume_get (kctl, uctl,CATPT_PIN_ID_OFFLOAD1 ); -} - -static int catpt_offload1_volume_put (struct snd_kcontrol *kctl, -struct snd_ctl_elem_value *uctl) -{ -return catpt_stream_volume_put (kctl, uctl,CATPT_PIN_ID_OFFLOAD1 ); -} - -static int catpt_offload2_volume_get (struct snd_kcontrol *kctl, -struct snd_ctl_elem_value *uctl) -{ -return catpt_stream_volume_get (kctl, uctl,CATPT_PIN_ID_OFFLOAD2 ); -} - -static int catpt_offload2_volume_put (struct snd_kcontrol *kctl, -struct snd_ctl_elem_value *uctl) -{ -return catpt_stream_volume_put (kctl, uctl,CATPT_PIN_ID_OFFLOAD2 ); -} - -static int catpt_capture_volume_get (struct snd_kcontrol *kctl, -struct snd_ctl_elem_value *uctl) -{ -return catpt_stream_volume_get (kctl, uctl,CATPT_PIN_ID_CAPTURE1 ); -} - -static int catpt_capture_volume_put (struct snd_kcontrol *kctl, -struct snd_ctl_elem_value *uctl) -{ -return catpt_stream_volume_put (kctl, uctl,CATPT_PIN_ID_CAPTURE1 ); -} - -static int catpt_loopback_switch_get (struct snd_kcontrol *kcontrol, -struct snd_ctl_elem_value *ucontrol) -{ - ucontrol->value.integer.value[0 ] = *(bool *)kcontrol->private_value; -return 0 ; -} - -static int catpt_loopback_switch_put (struct snd_kcontrol *kcontrol, -struct snd_ctl_elem_value *ucontrol) -{ -struct snd_soc_component *component =snd_kcontrol_chip (kcontrol); -struct catpt_stream_runtime *stream; -struct catpt_dev *cdev =dev_get_drvdata (component->dev); -bool mute; -int ret; - -guard (mutex)(&cdev->stream_mutex); - - mute = (bool )ucontrol->value.integer.value[0 ]; - stream =catpt_stream_find (cdev,CATPT_PIN_ID_REFERENCE ); -if (!stream) { - *(bool *)kcontrol->private_value = mute; -return 0 ; - } - - ret =pm_runtime_resume_and_get (cdev->dev); -if (ret) -return ret; - - ret =catpt_ipc_mute_loopback (cdev, stream->info.stream_hw_id, mute); - -pm_runtime_put_autosuspend (cdev->dev); - -if (ret) -return CATPT_IPC_RET (ret); - - *(bool *)kcontrol->private_value = mute; -return 0 ; -} -static int catpt_waves_switch_get (struct snd_kcontrol *kcontrol,struct snd_ctl_elem_value *ucontrol) {
@@ -1219,7 +1000,7 @@ static int catpt_waves_param_put(struct snd_kcontrol *kcontrol, static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(catpt_volume_tlv, -9000, 300, 1); -#define CATPT_VOLUME_CTL2 (kname, pname) { \ +#define CATPT_VOLUME_CTL (kname, pname) { \ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ .name = kname, \ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \
@@ -1232,27 +1013,15 @@ static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(catpt_volume_tlv, -9000, 300, 1); &(struct catpt_control_data) { CATPT_PIN_ID_##pname } \ } -#define CATPT_VOLUME_CTL (kname, sname) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ - .name = (kname), \ - .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ - SNDRV_CTL_ELEM_ACCESS_READWRITE, \ - .info = catpt_volume_info, \ - .get = catpt_##sname##_volume_get, \ - .put = catpt_##sname##_volume_put, \ - .tlv.p = catpt_volume_tlv, \ - .private_value = (unsigned long) \ - &(long[CATPT_CHANNELS_MAX]) {0} } -static const struct snd_kcontrol_new component_kcontrols[] = {/* Master volume (mixer stream) */ -CATPT_VOLUME_CTL ("Master Playback Volume" , mixer), +CATPT_VOLUME_CTL ("Master Playback Volume" ,MIXER ),/* Individual volume controls for offload and capture */ -CATPT_VOLUME_CTL ("Media0 Playback Volume" , offload1), -CATPT_VOLUME_CTL ("Media1 Playback Volume" , offload2), -CATPT_VOLUME_CTL ("Mic Capture Volume" , capture), +CATPT_VOLUME_CTL ("Media0 Playback Volume" ,OFFLOAD1 ), +CATPT_VOLUME_CTL ("Media1 Playback Volume" ,OFFLOAD2 ), +CATPT_VOLUME_CTL ("Mic Capture Volume" ,CAPTURE1 ),SOC_SINGLE_BOOL_EXT ("Loopback Mute" , (unsigned long )&(bool [1 ]) {0 }, - catpt_loopback_switch_get, catpt_loopback_switch_put), + catpt_loopback_mute_get, catpt_loopback_mute_put),/* Enable or disable WAVES module */ SOC_SINGLE_BOOL_EXT ("Waves Switch" ,0 , catpt_waves_switch_get, catpt_waves_switch_put),
Signature · 1 line
2.34.1
Mark Brown
maintainerQuoted 11 lines · Cezary Rojewski
Short summary first, longer description later:
- fix the return code for
kctl->put()- currently the driver returns '0' even if changes were done
- lower power consumption for kctl operations by waking the DSP only when some streaming is done. No streaming? Cache the values and inform the AudioDSP firmware later.
- drop the existing code duplication between individual and master volume controls[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/5] ASoC: Intel: catpt: Synchronize stream access
commit: b0b49c77bddac75db79f7c2c6ec0b07d61864f2f
[2/5] ASoC: Intel: catpt: New volume and mute control operations
commit: d16b942aa7fa6135a44d156246d98e50b5a0aad3
[3/5] ASoC: Intel: catpt: Simplify procedure of applying user settings
commit: 2464febd81e4c98f78466462da938ed2f8c37e17
[4/5] ASoC: Intel: catpt: Do not wake DSP just for volume setup
commit: 150badf73e9a10cf646d07353b41117ea90f67ae
[5/5] ASoC: Intel: catpt: Migrate to the new control operations
commit: 8a99ccb032d670eae2b1ea89174e06a60d2d3fc2All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Mark Brown
maintainerQuoted 12 lines · Cezary Rojewski
ASoC: Intel: catpt: Overhaul volume and mute control operations
Short summary first, longer description later:
- fix the return code for
kctl->put()- currently the driver returns '0' even if changes were done
- lower power consumption for kctl operations by waking the DSP only when some streaming is done. No streaming? Cache the values and inform the AudioDSP firmware later.
- drop the existing code duplication between individual and master volume controls
Quoted 1 line
[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-7.1
Thanks!
[1/5] ASoC: Intel: catpt: Synchronize stream access
https://git.kernel.org/broonie/misc/c/b0b49c77bdda [2/5] ASoC: Intel: catpt: New volume and mute control operations https://git.kernel.org/broonie/misc/c/d16b942aa7fa [3/5] ASoC: Intel: catpt: Simplify procedure of applying user settings https://git.kernel.org/broonie/misc/c/2464febd81e4 [4/5] ASoC: Intel: catpt: Do not wake DSP just for volume setup https://git.kernel.org/broonie/misc/c/150badf73e9a [5/5] ASoC: Intel: catpt: Migrate to the new control operations https://git.kernel.org/broonie/misc/c/8a99ccb032d6
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark