FAILED: patch "[PATCH] selftests: mptcp: join: check RM_ADDR not sent over same" failed to apply to 6.1-stable tree
Subsystems (4)
[email protected]
maintainerThe patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 560edd99b5f58b2d4bbe3c8e51e1eed68d887b0e
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2026030947-outcome-ferris-731b@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 560edd99b5f58b2d4bbe3c8e51e1eed68d887b0e Mon Sep 17 00:00:00 2001
From: "Matthieu Baerts (NGI0)" <[email protected]>
Date: Tue, 3 Mar 2026 11:56:04 +0100
Subject: [PATCH] selftests: mptcp: join: check RM_ADDR not sent over same
subflow
This validates the previous commit: RM_ADDR were sent over the first found active subflow which could be the same as the one being removed. It is more likely to loose this notification.
For this check, RM_ADDR are explicitly dropped when trying to send them over the initial subflow, when removing the endpoint attached to it. If it is dropped, the test will complain because some RM_ADDR have not been received.
Note that only the RM_ADDR are dropped, to allow the linked subflow to be quickly and cleanly closed. To only drop those RM_ADDR, a cBPF byte code is used. If the IPTables commands fail, that's OK, the tests will continue to pass, but not validate this part. This can be ignored:
another subtest fully depends on such command, and will be marked as skipped.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID.
tools/testing/selftests/net/mptcp/mptcp_join.sh +36 -0
@@ -104,6 +104,24 @@ CBPF_MPTCP_SUBOPTION_ADD_ADDR="14, 6 0 0 65535, 6 0 0 0" +# IPv4: TCP hdr of 48B, a first suboption of 12B (DACK8), the RM_ADDR suboption +# generated using "nfbpf_compile '(ip[32] & 0xf0) == 0xc0 && ip[53] == 0x0c && +# (ip[66] & 0xf0) == 0x40'" +CBPF_MPTCP_SUBOPTION_RM_ADDR="13, + 48 0 0 0, + 84 0 0 240, + 21 0 9 64, + 48 0 0 32, + 84 0 0 240, + 21 0 6 192, + 48 0 0 53, + 21 0 4 12, + 48 0 0 66, + 84 0 0 240, + 21 0 1 64, + 6 0 0 65535, + 6 0 0 0" + init_partial() { capout=$(mktemp)
@@ -4217,6 +4235,14 @@ endpoint_tests() chk_subflow_nr "after no reject" 3 chk_mptcp_info subflows 2 subflows 2 + # To make sure RM_ADDR are sent over a different subflow, but + # allow the rest to quickly and cleanly close the subflow + local ipt=1 + ip netns exec "${ns2}" ${iptables} -I OUTPUT -s "10.0.1.2" \ + -p tcp -m tcp --tcp-option 30 \ + -m bpf --bytecode \ + "$CBPF_MPTCP_SUBOPTION_RM_ADDR" \ + -j DROP || ipt=0 local i for i in $(seq 3); do pm_nl_del_endpoint $ns2 1 10.0.1.2
@@ -4229,6 +4255,7 @@ endpoint_tests() chk_subflow_nr "after re-add id 0 ($i)" 3 chk_mptcp_info subflows 3 subflows 3 done + [ ${ipt} = 1 ] && ip netns exec "${ns2}" ${iptables} -D OUTPUT 1 mptcp_lib_kill_group_wait $tests_pid
@@ -4288,11 +4315,20 @@ endpoint_tests() chk_mptcp_info subflows 2 subflows 2 chk_mptcp_info add_addr_signal 2 add_addr_accepted 2 + # To make sure RM_ADDR are sent over a different subflow, but + # allow the rest to quickly and cleanly close the subflow + local ipt=1 + ip netns exec "${ns1}" ${iptables} -I OUTPUT -s "10.0.1.1" \ + -p tcp -m tcp --tcp-option 30 \ + -m bpf --bytecode \ + "$CBPF_MPTCP_SUBOPTION_RM_ADDR" \ + -j DROP || ipt=0 pm_nl_del_endpoint $ns1 42 10.0.1.1 sleep 0.5 chk_subflow_nr "after delete ID 0" 2 chk_mptcp_info subflows 2 subflows 2 chk_mptcp_info add_addr_signal 2 add_addr_accepted 2 + [ ${ipt} = 1 ] && ip netns exec "${ns1}" ${iptables} -D OUTPUT 1 pm_nl_add_endpoint $ns1 10.0.1.1 id 99 flags signal wait_mpj 4
Sasha Levin
maintainerPATCH 1/1 selftests: mptcp: join: check RM_ADDR not sent over same subflow
From: "Matthieu Baerts (NGI0)" <[email protected]>
[ Upstream commit 560edd99b5f58b2d4bbe3c8e51e1eed68d887b0e ]
This validates the previous commit: RM_ADDR were sent over the first found active subflow which could be the same as the one being removed. It is more likely to loose this notification.
For this check, RM_ADDR are explicitly dropped when trying to send them over the initial subflow, when removing the endpoint attached to it. If it is dropped, the test will complain because some RM_ADDR have not been received.
Note that only the RM_ADDR are dropped, to allow the linked subflow to be quickly and cleanly closed. To only drop those RM_ADDR, a cBPF byte code is used. If the IPTables commands fail, that's OK, the tests will continue to pass, but not validate this part. This can be ignored:
another subtest fully depends on such command, and will be marked as skipped.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests, but it validates the previous fix for an issue introduced by this commit ID.
--- .../testing/selftests/net/mptcp/mptcp_join.sh | 36 +++++++++++++++++++ 1 file changed, 36 insertions(+)
tools/testing/selftests/net/mptcp/mptcp_join.sh +36 -0
@@ -64,6 +64,24 @@ CBPF_MPTCP_SUBOPTION_ADD_ADDR="14, 6 0 0 65535, 6 0 0 0" +# IPv4: TCP hdr of 48B, a first suboption of 12B (DACK8), the RM_ADDR suboption +# generated using "nfbpf_compile '(ip[32] & 0xf0) == 0xc0 && ip[53] == 0x0c && +# (ip[66] & 0xf0) == 0x40'" +CBPF_MPTCP_SUBOPTION_RM_ADDR="13, + 48 0 0 0, + 84 0 0 240, + 21 0 9 64, + 48 0 0 32, + 84 0 0 240, + 21 0 6 192, + 48 0 0 53, + 21 0 4 12, + 48 0 0 66, + 84 0 0 240, + 21 0 1 64, + 6 0 0 65535, + 6 0 0 0" + init_partial() { capout=$(mktemp)
@@ -3455,6 +3473,14 @@ endpoint_tests() wait_mpj $ns2 chk_subflow_nr "" "after no reject" 3 + # To make sure RM_ADDR are sent over a different subflow, but + # allow the rest to quickly and cleanly close the subflow + local ipt=1 + ip netns exec "${ns2}" ${iptables} -I OUTPUT -s "10.0.1.2" \ + -p tcp -m tcp --tcp-option 30 \ + -m bpf --bytecode \ + "$CBPF_MPTCP_SUBOPTION_RM_ADDR" \ + -j DROP || ipt=0 local i for i in $(seq 3); do pm_nl_del_endpoint $ns2 1 10.0.1.2
@@ -3465,6 +3491,7 @@ endpoint_tests() wait_mpj $ns2 chk_subflow_nr "" "after re-add id 0 ($i)" 3 done + [ ${ipt} = 1 ] && ip netns exec "${ns2}" ${iptables} -D OUTPUT 1 kill_wait "${tests_pid}" kill_events_pids
@@ -3514,9 +3541,18 @@ endpoint_tests() wait_mpj $ns2 chk_subflow_nr "" "after re-add" 3 + # To make sure RM_ADDR are sent over a different subflow, but + # allow the rest to quickly and cleanly close the subflow + local ipt=1 + ip netns exec "${ns1}" ${iptables} -I OUTPUT -s "10.0.1.1" \ + -p tcp -m tcp --tcp-option 30 \ + -m bpf --bytecode \ + "$CBPF_MPTCP_SUBOPTION_RM_ADDR" \ + -j DROP || ipt=0 pm_nl_del_endpoint $ns1 42 10.0.1.1 sleep 0.5 chk_subflow_nr "" "after delete ID 0" 2 + [ ${ipt} = 1 ] && ip netns exec "${ns1}" ${iptables} -D OUTPUT 1 pm_nl_add_endpoint $ns1 10.0.1.1 id 99 flags signal wait_mpj $ns2
Signature · 1 line
2.51.0