firmware: cs_dsp: Simplify suppressing log messages during KUnit testing
Subsystems (2)
Richard Fitzgerald
maintainerPATCH 1/1 firmware: cs_dsp: Simplify suppressing log messages during KUnit testing
Rework the way that kernel log messages are rate-limited or suppressed while running the cs_dsp KUnit tests.
Under normal conditions cs_dsp doesn't produce an unreasonable number of log messages, and state changes are relatively infrequent. But the KUnit tests run through a very large number of test cases, especially error cases, and this produces an unusually large amount of log output from cs_dsp.
The original fix for this in commit 10db9f6899dd ("firmware: cs_dsp:
rate-limit log messages in KUnit builds") was effective but not pretty. It involved different definitions of the log macros for KUnit and not-KUnit builds, and exported variables for the KUnit tests to disable log messages. I would have preferred to turn the log macros into real functions that can contain a KUNIT_STATIC_STUB_REDIRECT(), but the dev_xxx() macros don't have a version that take va_args, so they can't be wrapped by a function.
This patch enables the use of a KUNIT_STATIC_STUB_REDIRECT() instead of exported variables, and avoids the need for different definitions of the debug macros in KUnit and not-KUnit builds.
- A new function cs_dsp_can_emit_message() returns true if the messages can be emitted to the kernel log. In a normal not-KUnit build this function collapses to simply returning true. In KUnit builds it will rate-limit output, and this uses a single static rate limiter so it limits the overall rate across all cs_dsp log messages. The KUnit test can redirect it to change the suppression behavior.
- The cs_dsp debug message macros are changed to only call the dev_xxx() if cs_dsp_can_emit_message() returns true. These are still macros so there is no problem wrapping the dev_xxx(). For a normal not-KUnit build cs_dsp_can_emit_message() always returns true so these macros simplify down to being identical to calling dev_xxx() directly.
- The KUnit tests that cause a lot of cs_dsp messages now redirect cs_dsp_can_emit_message() to a local function. This returns false to suppress cs_dsp messages, unless DEBUG is defined for that test.
I have checked that for a x86_64 production (non-KUnit) build the disassembled cs_dsp.o is identical to what was generated from the original code. So the complier is correctly simplifying the cs_dsp_can_emit_message() and macros down to only the call to dev_xxx().
--- drivers/firmware/cirrus/cs_dsp.c | 68 ++++++++++--------- drivers/firmware/cirrus/cs_dsp.h | 4 +- .../firmware/cirrus/test/cs_dsp_test_bin.c | 21 +++--- .../cirrus/test/cs_dsp_test_bin_error.c | 19 +++--- .../firmware/cirrus/test/cs_dsp_test_wmfw.c | 25 ++++--- .../cirrus/test/cs_dsp_test_wmfw_error.c | 23 +++---- 6 files changed, 79 insertions(+), 81 deletions(-)
drivers/firmware/cirrus/cs_dsp.c +36 -32
@@ -9,6 +9,7 @@* Cirrus Logic International Semiconductor Ltd. */ +#include <kunit/static_stub.h> #include <kunit/visibility.h> #include <linux/cleanup.h> #include <linux/ctype.h>
@@ -18,6 +19,7 @@#include <linux/minmax.h> #include <linux/module.h> #include <linux/moduleparam.h> +#include <linux/ratelimit.h> #include <linux/seq_file.h> #include <linux/slab.h> #include <linux/vmalloc.h>
@@ -30,45 +32,47 @@/* * When the KUnit test is running the error-case tests will cause a lot * of messages. Rate-limit to prevent overflowing the kernel log buffer -* during KUnit test runs. +* during KUnit test runs and allow the test to redirect this function. +* In normal (not KUnit) builds this collapses to only return true. */ -#if IS_ENABLED (CONFIG_FW_CS_DSP_KUNIT_TEST ) -bool cs_dsp_suppress_err_messages; -EXPORT_SYMBOL_IF_KUNIT (cs_dsp_suppress_err_messages); +VISIBLE_IF_KUNIT bool cs_dsp_can_emit_message(void) +{ +KUNIT_STATIC_STUB_REDIRECT (cs_dsp_can_emit_message); -bool cs_dsp_suppress_warn_messages; -EXPORT_SYMBOL_IF_KUNIT (cs_dsp_suppress_warn_messages); +if (IS_ENABLED (CONFIG_FW_CS_DSP_KUNIT_TEST )) { + static DEFINE_RATELIMIT_STATE(_rs, + DEFAULT_RATELIMIT_INTERVAL, + DEFAULT_RATELIMIT_BURST); +return __ratelimit (&_rs); + } -bool cs_dsp_suppress_info_messages; -EXPORT_SYMBOL_IF_KUNIT (cs_dsp_suppress_info_messages); +return true; +} +EXPORT_SYMBOL_IF_KUNIT (cs_dsp_can_emit_message); -#define cs_dsp_err (_dsp, fmt, ...) \ - do { \ - if (!cs_dsp_suppress_err_messages) \ - dev_err_ratelimited(_dsp->dev, "%s: " fmt, _dsp->name, ##__VA_ARGS__); \ +#define cs_dsp_err (_dsp, fmt, ...) \ + do { \ + if (cs_dsp_can_emit_message()) \ + dev_err(_dsp->dev, "%s: " fmt, _dsp->name, ##__VA_ARGS__); \ } while (false) -#define cs_dsp_warn (_dsp, fmt, ...) \ - do { \ - if (!cs_dsp_suppress_warn_messages) \ - dev_warn_ratelimited(_dsp->dev, "%s: " fmt, _dsp->name, ##__VA_ARGS__); \ + +#define cs_dsp_warn (_dsp, fmt, ...) \ + do { \ + if (cs_dsp_can_emit_message()) \ + dev_warn(_dsp->dev, "%s: " fmt, _dsp->name, ##__VA_ARGS__); \ + } while (false) + +#define cs_dsp_info (_dsp, fmt, ...) \ + do { \ + if (cs_dsp_can_emit_message()) \ + dev_info(_dsp->dev, "%s: " fmt, _dsp->name, ##__VA_ARGS__); \ } while (false) -#define cs_dsp_info (_dsp, fmt, ...) \ - do { \ - if (!cs_dsp_suppress_info_messages) \ - dev_info_ratelimited(_dsp->dev, "%s: " fmt, _dsp->name, ##__VA_ARGS__); \ + +#define cs_dsp_dbg (_dsp, fmt, ...) \ + do { \ + if (cs_dsp_can_emit_message()) \ + dev_dbg(_dsp->dev, "%s: " fmt, _dsp->name, ##__VA_ARGS__); \ } while (false) -#define cs_dsp_dbg (_dsp, fmt, ...) \ - dev_dbg_ratelimited(_dsp->dev, "%s: " fmt, _dsp->name, ##__VA_ARGS__) -#else -#define cs_dsp_err (_dsp, fmt, ...) \ - dev_err(_dsp->dev, "%s: " fmt, _dsp->name, ##__VA_ARGS__) -#define cs_dsp_warn (_dsp, fmt, ...) \ - dev_warn(_dsp->dev, "%s: " fmt, _dsp->name, ##__VA_ARGS__) -#define cs_dsp_info (_dsp, fmt, ...) \ - dev_info(_dsp->dev, "%s: " fmt, _dsp->name, ##__VA_ARGS__) -#define cs_dsp_dbg (_dsp, fmt, ...) \ - dev_dbg(_dsp->dev, "%s: " fmt, _dsp->name, ##__VA_ARGS__) -#endif #define ADSP1_CONTROL_1 0x00#define ADSP1_CONTROL_2 0x02
drivers/firmware/cirrus/cs_dsp.h +1 -3
@@ -10,9 +10,7 @@#define FW_CS_DSP_H #if IS_ENABLED (CONFIG_KUNIT ) -extern bool cs_dsp_suppress_err_messages; -extern bool cs_dsp_suppress_warn_messages; -extern bool cs_dsp_suppress_info_messages; +bool cs_dsp_can_emit_message (void );#endif #endif /* ifndef FW_CS_DSP_H */
drivers/firmware/cirrus/test/cs_dsp_test_bin.c +12 -9
@@ -7,6 +7,7 @@#include <kunit/device.h> #include <kunit/resource.h> +#include <kunit/static_stub.h> #include <kunit/test.h> #include <linux/build_bug.h> #include <linux/firmware/cirrus/cs_dsp.h>
@@ -2155,6 +2156,15 @@ static void bin_patch_name_and_info(struct kunit *test)KUNIT_EXPECT_EQ (test, reg_val, payload_data); } +static bool cs_dsp_bin_test_can_emit_message_hook (void ) +{ +#if defined(DEBUG ) +return true; +#else +return false; +#endif +} +static int cs_dsp_bin_test_common_init (struct kunit *test,struct cs_dsp *dsp,int wmdr_ver) {
@@ -2239,16 +2249,12 @@ static int cs_dsp_bin_test_common_init(struct kunit *test, struct cs_dsp *dsp,* The large number of test cases will cause an unusually large amount * of dev_info() messages from cs_dsp, so suppress these. */ - cs_dsp_suppress_info_messages = true; +kunit_activate_static_stub (test, cs_dsp_can_emit_message, + cs_dsp_bin_test_can_emit_message_hook);return 0 ; } -static void cs_dsp_bin_test_exit (struct kunit *test) -{ - cs_dsp_suppress_info_messages = false; -} -static int cs_dsp_bin_test_halo_init_common (struct kunit *test,int wmdr_ver) {struct cs_dsp *dsp;
@@ -2833,7 +2839,6 @@ static struct kunit_case cs_dsp_bin_test_cases_adsp2[] = {static struct kunit_suite cs_dsp_bin_test_halo = { .name ="cs_dsp_bin_halo" , .init = cs_dsp_bin_test_halo_init, - .exit = cs_dsp_bin_test_exit, .test_cases = cs_dsp_bin_test_cases_halo, .attr.speed =KUNIT_SPEED_SLOW , };
@@ -2848,7 +2853,6 @@ static struct kunit_suite cs_dsp_bin_test_halo_wmdr3 = {static struct kunit_suite cs_dsp_bin_test_adsp2_32bit = { .name ="cs_dsp_bin_adsp2_32bit" , .init = cs_dsp_bin_test_adsp2_32bit_init, - .exit = cs_dsp_bin_test_exit, .test_cases = cs_dsp_bin_test_cases_adsp2, .attr.speed =KUNIT_SPEED_SLOW , };
@@ -2856,7 +2860,6 @@ static struct kunit_suite cs_dsp_bin_test_adsp2_32bit = {static struct kunit_suite cs_dsp_bin_test_adsp2_16bit = { .name ="cs_dsp_bin_adsp2_16bit" , .init = cs_dsp_bin_test_adsp2_16bit_init, - .exit = cs_dsp_bin_test_exit, .test_cases = cs_dsp_bin_test_cases_adsp2, .attr.speed =KUNIT_SPEED_SLOW , };
drivers/firmware/cirrus/test/cs_dsp_test_bin_error.c +9 -10
@@ -8,6 +8,7 @@#include <kunit/device.h> #include <kunit/resource.h> +#include <kunit/static_stub.h> #include <kunit/test.h> #include <linux/build_bug.h> #include <linux/firmware/cirrus/cs_dsp.h>
@@ -380,11 +381,13 @@ static void bin_block_payload_len_garbage(struct kunit *test) 0); } -static void cs_dsp_bin_err_test_exit (struct kunit *test) +static bool cs_dsp_bin_err_test_can_emit_message_hook (void ) { - cs_dsp_suppress_err_messages = false; - cs_dsp_suppress_warn_messages = false; - cs_dsp_suppress_info_messages = false; +#if defined(DEBUG ) +return true; +#else +return false; +#endif } static int cs_dsp_bin_err_test_common_init(struct kunit *test, struct cs_dsp *dsp,
@@ -482,9 +485,8 @@ static int cs_dsp_bin_err_test_common_init(struct kunit *test, struct cs_dsp *ds* Testing error conditions can produce a lot of log output * from cs_dsp error messages, so suppress messages. */ - cs_dsp_suppress_err_messages = true; - cs_dsp_suppress_warn_messages = true; - cs_dsp_suppress_info_messages = true; +kunit_activate_static_stub (test, cs_dsp_can_emit_message, + cs_dsp_bin_err_test_can_emit_message_hook);return 0 ; }
@@ -584,7 +586,6 @@ static struct kunit_case cs_dsp_bin_err_test_cases[] = {static struct kunit_suite cs_dsp_bin_err_test_halo = { .name ="cs_dsp_bin_err_halo" , .init = cs_dsp_bin_err_test_halo_init, - .exit = cs_dsp_bin_err_test_exit, .test_cases = cs_dsp_bin_err_test_cases, .attr.speed =KUNIT_SPEED_SLOW , };
@@ -592,7 +593,6 @@ static struct kunit_suite cs_dsp_bin_err_test_halo = {static struct kunit_suite cs_dsp_bin_err_test_adsp2_32bit = { .name ="cs_dsp_bin_err_adsp2_32bit" , .init = cs_dsp_bin_err_test_adsp2_32bit_init, - .exit = cs_dsp_bin_err_test_exit, .test_cases = cs_dsp_bin_err_test_cases, .attr.speed =KUNIT_SPEED_SLOW , };
@@ -600,7 +600,6 @@ static struct kunit_suite cs_dsp_bin_err_test_adsp2_32bit = {static struct kunit_suite cs_dsp_bin_err_test_adsp2_16bit = { .name ="cs_dsp_bin_err_adsp2_16bit" , .init = cs_dsp_bin_err_test_adsp2_16bit_init, - .exit = cs_dsp_bin_err_test_exit, .test_cases = cs_dsp_bin_err_test_cases, .attr.speed =KUNIT_SPEED_SLOW , };
drivers/firmware/cirrus/test/cs_dsp_test_wmfw.c +12 -13
@@ -8,6 +8,7 @@#include <kunit/device.h> #include <kunit/resource.h> +#include <kunit/static_stub.h> #include <kunit/test.h> #include <linux/build_bug.h> #include <linux/firmware/cirrus/cs_dsp.h>
@@ -1775,6 +1776,15 @@ static void wmfw_load_with_info(struct kunit *test)KUNIT_EXPECT_MEMEQ (test, readback, payload_data, payload_size_bytes); } +static bool cs_dsp_wmfw_test_can_emit_message_hook (void ) +{ +#if defined(DEBUG ) +return true; +#else +return false; +#endif +} +static int cs_dsp_wmfw_test_common_init (struct kunit *test,struct cs_dsp *dsp,int wmfw_version) {
@@ -1863,16 +1873,12 @@ static int cs_dsp_wmfw_test_common_init(struct kunit *test, struct cs_dsp *dsp,* The large number of test cases will cause an unusually large amount * of dev_info() messages from cs_dsp, so suppress these. */ - cs_dsp_suppress_info_messages = true; +kunit_activate_static_stub (test, cs_dsp_can_emit_message, + cs_dsp_wmfw_test_can_emit_message_hook);return 0 ; } -static void cs_dsp_wmfw_test_exit (struct kunit *test) -{ - cs_dsp_suppress_info_messages = false; -} -static int cs_dsp_wmfw_test_halo_init (struct kunit *test) {struct cs_dsp *dsp;
@@ -2180,7 +2186,6 @@ static struct kunit_case cs_dsp_wmfw_test_cases_adsp2[] = {static struct kunit_suite cs_dsp_wmfw_test_halo = { .name ="cs_dsp_wmfwV3_halo" , .init = cs_dsp_wmfw_test_halo_init, - .exit = cs_dsp_wmfw_test_exit, .test_cases = cs_dsp_wmfw_test_cases_halo, .attr.speed =KUNIT_SPEED_SLOW , };
@@ -2188,7 +2193,6 @@ static struct kunit_suite cs_dsp_wmfw_test_halo = {static struct kunit_suite cs_dsp_wmfw_test_adsp2_32bit_wmfw0 = { .name ="cs_dsp_wmfwV0_adsp2_32bit" , .init = cs_dsp_wmfw_test_adsp2_32bit_wmfw0_init, - .exit = cs_dsp_wmfw_test_exit, .test_cases = cs_dsp_wmfw_test_cases_adsp2, .attr.speed =KUNIT_SPEED_SLOW , };
@@ -2196,7 +2200,6 @@ static struct kunit_suite cs_dsp_wmfw_test_adsp2_32bit_wmfw0 = {static struct kunit_suite cs_dsp_wmfw_test_adsp2_32bit_wmfw1 = { .name ="cs_dsp_wmfwV1_adsp2_32bit" , .init = cs_dsp_wmfw_test_adsp2_32bit_wmfw1_init, - .exit = cs_dsp_wmfw_test_exit, .test_cases = cs_dsp_wmfw_test_cases_adsp2, .attr.speed =KUNIT_SPEED_SLOW , };
@@ -2204,7 +2207,6 @@ static struct kunit_suite cs_dsp_wmfw_test_adsp2_32bit_wmfw1 = {static struct kunit_suite cs_dsp_wmfw_test_adsp2_32bit_wmfw2 = { .name ="cs_dsp_wmfwV2_adsp2_32bit" , .init = cs_dsp_wmfw_test_adsp2_32bit_wmfw2_init, - .exit = cs_dsp_wmfw_test_exit, .test_cases = cs_dsp_wmfw_test_cases_adsp2, .attr.speed =KUNIT_SPEED_SLOW , };
@@ -2212,7 +2214,6 @@ static struct kunit_suite cs_dsp_wmfw_test_adsp2_32bit_wmfw2 = {static struct kunit_suite cs_dsp_wmfw_test_adsp2_16bit_wmfw0 = { .name ="cs_dsp_wmfwV0_adsp2_16bit" , .init = cs_dsp_wmfw_test_adsp2_16bit_wmfw0_init, - .exit = cs_dsp_wmfw_test_exit, .test_cases = cs_dsp_wmfw_test_cases_adsp2, .attr.speed =KUNIT_SPEED_SLOW , };
@@ -2220,7 +2221,6 @@ static struct kunit_suite cs_dsp_wmfw_test_adsp2_16bit_wmfw0 = {static struct kunit_suite cs_dsp_wmfw_test_adsp2_16bit_wmfw1 = { .name ="cs_dsp_wmfwV1_adsp2_16bit" , .init = cs_dsp_wmfw_test_adsp2_16bit_wmfw1_init, - .exit = cs_dsp_wmfw_test_exit, .test_cases = cs_dsp_wmfw_test_cases_adsp2, .attr.speed =KUNIT_SPEED_SLOW , };
@@ -2228,7 +2228,6 @@ static struct kunit_suite cs_dsp_wmfw_test_adsp2_16bit_wmfw1 = {static struct kunit_suite cs_dsp_wmfw_test_adsp2_16bit_wmfw2 = { .name ="cs_dsp_wmfwV2_adsp2_16bit" , .init = cs_dsp_wmfw_test_adsp2_16bit_wmfw2_init, - .exit = cs_dsp_wmfw_test_exit, .test_cases = cs_dsp_wmfw_test_cases_adsp2, .attr.speed =KUNIT_SPEED_SLOW , };
drivers/firmware/cirrus/test/cs_dsp_test_wmfw_error.c +9 -14
@@ -8,6 +8,7 @@#include <kunit/device.h> #include <kunit/resource.h> +#include <kunit/static_stub.h> #include <kunit/test.h> #include <linux/build_bug.h> #include <linux/firmware/cirrus/cs_dsp.h>
@@ -989,11 +990,13 @@ static void wmfw_v2_coeff_description_exceeds_block(struct kunit *test) -EOVERFLOW); } -static void cs_dsp_wmfw_err_test_exit (struct kunit *test) +static bool cs_dsp_wmfw_err_test_can_emit_message_hook (void ) { - cs_dsp_suppress_err_messages = false; - cs_dsp_suppress_warn_messages = false; - cs_dsp_suppress_info_messages = false; +#if defined(DEBUG ) +return true; +#else +return false; +#endif } static int cs_dsp_wmfw_err_test_common_init(struct kunit *test, struct cs_dsp *dsp,
@@ -1080,9 +1083,8 @@ static int cs_dsp_wmfw_err_test_common_init(struct kunit *test, struct cs_dsp *d* Testing error conditions can produce a lot of log output * from cs_dsp error messages, so suppress messages. */ - cs_dsp_suppress_err_messages = true; - cs_dsp_suppress_warn_messages = true; - cs_dsp_suppress_info_messages = true; +kunit_activate_static_stub (test, cs_dsp_can_emit_message, + cs_dsp_wmfw_err_test_can_emit_message_hook);return 0 ; }
@@ -1304,7 +1306,6 @@ static struct kunit_case cs_dsp_wmfw_err_test_cases_v3[] = {static struct kunit_suite cs_dsp_wmfw_err_test_halo = { .name ="cs_dsp_wmfwV3_err_halo" , .init = cs_dsp_wmfw_err_test_halo_init, - .exit = cs_dsp_wmfw_err_test_exit, .test_cases = cs_dsp_wmfw_err_test_cases_v3, .attr.speed =KUNIT_SPEED_SLOW , };
@@ -1312,7 +1313,6 @@ static struct kunit_suite cs_dsp_wmfw_err_test_halo = {static struct kunit_suite cs_dsp_wmfw_err_test_adsp2_32bit_wmfw0 = { .name ="cs_dsp_wmfwV0_err_adsp2_32bit" , .init = cs_dsp_wmfw_err_test_adsp2_32bit_wmfw0_init, - .exit = cs_dsp_wmfw_err_test_exit, .test_cases = cs_dsp_wmfw_err_test_cases_v0, .attr.speed =KUNIT_SPEED_SLOW , };
@@ -1320,7 +1320,6 @@ static struct kunit_suite cs_dsp_wmfw_err_test_adsp2_32bit_wmfw0 = {static struct kunit_suite cs_dsp_wmfw_err_test_adsp2_32bit_wmfw1 = { .name ="cs_dsp_wmfwV1_err_adsp2_32bit" , .init = cs_dsp_wmfw_err_test_adsp2_32bit_wmfw1_init, - .exit = cs_dsp_wmfw_err_test_exit, .test_cases = cs_dsp_wmfw_err_test_cases_v1, .attr.speed =KUNIT_SPEED_SLOW , };
@@ -1328,7 +1327,6 @@ static struct kunit_suite cs_dsp_wmfw_err_test_adsp2_32bit_wmfw1 = {static struct kunit_suite cs_dsp_wmfw_err_test_adsp2_32bit_wmfw2 = { .name ="cs_dsp_wmfwV2_err_adsp2_32bit" , .init = cs_dsp_wmfw_err_test_adsp2_32bit_wmfw2_init, - .exit = cs_dsp_wmfw_err_test_exit, .test_cases = cs_dsp_wmfw_err_test_cases_v2, .attr.speed =KUNIT_SPEED_SLOW , };
@@ -1336,7 +1334,6 @@ static struct kunit_suite cs_dsp_wmfw_err_test_adsp2_32bit_wmfw2 = {static struct kunit_suite cs_dsp_wmfw_err_test_adsp2_16bit_wmfw0 = { .name ="cs_dsp_wmfwV0_err_adsp2_16bit" , .init = cs_dsp_wmfw_err_test_adsp2_16bit_wmfw0_init, - .exit = cs_dsp_wmfw_err_test_exit, .test_cases = cs_dsp_wmfw_err_test_cases_v0, .attr.speed =KUNIT_SPEED_SLOW , };
@@ -1344,7 +1341,6 @@ static struct kunit_suite cs_dsp_wmfw_err_test_adsp2_16bit_wmfw0 = {static struct kunit_suite cs_dsp_wmfw_err_test_adsp2_16bit_wmfw1 = { .name ="cs_dsp_wmfwV1_err_adsp2_16bit" , .init = cs_dsp_wmfw_err_test_adsp2_16bit_wmfw1_init, - .exit = cs_dsp_wmfw_err_test_exit, .test_cases = cs_dsp_wmfw_err_test_cases_v1, .attr.speed =KUNIT_SPEED_SLOW , };
@@ -1352,7 +1348,6 @@ static struct kunit_suite cs_dsp_wmfw_err_test_adsp2_16bit_wmfw1 = {static struct kunit_suite cs_dsp_wmfw_err_test_adsp2_16bit_wmfw2 = { .name ="cs_dsp_wmfwV2_err_adsp2_16bit" , .init = cs_dsp_wmfw_err_test_adsp2_16bit_wmfw2_init, - .exit = cs_dsp_wmfw_err_test_exit, .test_cases = cs_dsp_wmfw_err_test_cases_v2, .attr.speed =KUNIT_SPEED_SLOW , };
Signature · 1 line
2.47.3
Quoted 10 lines · Richard Fitzgerald
Rework the way that kernel log messages are rate-limited or suppressed while running the
cs_dspKUnit tests.Under normal conditions
cs_dspdoesn't produce an unreasonable number of log messages, and state changes are relatively infrequent. But the KUnit tests run through a very large number of test cases, especially error cases, and this produces an unusually large amount of log output fromcs_dsp.[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] firmware: cs_dsp: Simplify suppressing log messages during KUnit testing
commit: 9be71d462c33b1a00acfa4ab8f0f5332ed592817
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark