ALSA: hda/realtek: Enable rear line-out pins on MSI EC79 (ALCS1200A)
PATCH 1/1 ALSA: hda/realtek: Enable rear line-out pins on MSI EC79 (ALCS1200A)
On MSI systems with subsystem ID 1462:ec79 using the Realtek ALCS1200A codec, the rear line-out pins (0x14, 0x15, 0x16) are parsed as line outputs but do not come up with active pin widget control after boot. This leaves analog output on the rear jacks unavailable until userspace manually reprograms the codec.
Add a board-specific fixup that disables line-out/speaker automute and forces pins 0x14, 0x15, and 0x16 to PIN_OUT during HDA_FIXUP_ACT_INIT, while also clearing the output amp mute on those nodes.
Tested-on: MSI X570 Gaming Pro WiFi (1462:ec79, ALCS1200A)
--- sound/hda/codecs/realtek/alc882.c | 38 +++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+)
sound/hda/codecs/realtek/alc882.c +38 -0
@@ -60,6 +60,7 @@ enum {ALC887_FIXUP_ASUS_AUDIO ,ALC887_FIXUP_ASUS_HMIC ,ALCS1200A_FIXUP_MIC_VREF , +ALCS1200A_FIXUP_MSI_EC79 , ALC888VD_FIXUP_MIC_100VREF, };
@@ -261,6 +262,36 @@ static void alc887_fixup_asus_jack(struct hda_codec *codec, spec->gen.hp_automute_hook = alc887_asus_hp_automute_hook; } +static void alcs1200a_fixup_msi_ec79 (struct hda_codec *codec, +const struct hda_fixup *fix,int action) +{ +struct alc_spec *spec = codec->spec; + +if (action ==HDA_FIXUP_ACT_PRE_PROBE ) { + spec->gen.automute_lo =0 ; + spec->gen.automute_speaker =0 ; +return ; + } + +if (action !=HDA_FIXUP_ACT_INIT ) +return ; + +/* Front / Surround / CLFE line-out pins */ +snd_hda_set_pin_ctl (codec,0x14 ,PIN_OUT ); +snd_hda_set_pin_ctl (codec,0x15 ,PIN_OUT ); +snd_hda_set_pin_ctl (codec,0x16 ,PIN_OUT ); + +/* Unmute both output amp channels on all three pins */ +snd_hda_codec_amp_update (codec,0x14 ,0 ,HDA_OUTPUT ,0 ,0x80 ,0 ); +snd_hda_codec_amp_update (codec,0x14 ,1 ,HDA_OUTPUT ,0 ,0x80 ,0 ); + +snd_hda_codec_amp_update (codec,0x15 ,0 ,HDA_OUTPUT ,0 ,0x80 ,0 ); +snd_hda_codec_amp_update (codec,0x15 ,1 ,HDA_OUTPUT ,0 ,0x80 ,0 ); + +snd_hda_codec_amp_update (codec,0x16 ,0 ,HDA_OUTPUT ,0 ,0x80 ,0 ); +snd_hda_codec_amp_update (codec,0x16 ,1 ,HDA_OUTPUT ,0 ,0x80 ,0 ); +} +static const struct hda_fixup alc882_fixups[] = { [ALC882_FIXUP_ABIT_AW9D_MAX ] = { .type =HDA_FIXUP_PINS ,
@@ -553,6 +584,12 @@ static const struct hda_fixup alc882_fixups[] = { {} } }, + [ALCS1200A_FIXUP_MSI_EC79] = { + .type = HDA_FIXUP_FUNC, + .v.func = alcs1200a_fixup_msi_ec79, + .chained = true, + .chain_id = ALCS1200A_FIXUP_MIC_VREF, + }, [ALC888VD_FIXUP_MIC_100VREF] = { .type = HDA_FIXUP_PINCTLS, .v.pins = (const struct hda_pintbl[]) {
@@ -636,6 +673,7 @@ static const struct hda_quirk alc882_fixup_tbl[] = {SND_PCI_QUIRK (0x1458 ,0xa0cd ,"Gigabyte X570 Aorus Master" ,ALC1220_FIXUP_GB_X570 ),SND_PCI_QUIRK (0x1458 ,0xa0ce ,"Gigabyte X570 Aorus Xtreme" ,ALC1220_FIXUP_GB_X570 ),SND_PCI_QUIRK (0x1458 ,0xa0d5 ,"Gigabyte X570S Aorus Master" ,ALC1220_FIXUP_GB_X570 ), +SND_PCI_QUIRK (0x1462 ,0xec79 ,"MSI ALCS1200A" ,ALCS1200A_FIXUP_MSI_EC79 ),SND_PCI_QUIRK (0x1462 ,0x11f7 ,"MSI-GE63" ,ALC1220_FIXUP_CLEVO_P950 ),SND_PCI_QUIRK (0x1462 ,0x1228 ,"MSI-GP63" ,ALC1220_FIXUP_CLEVO_P950 ), SND_PCI_QUIRK(0x1462, 0x1229, "MSI-GP73", ALC1220_FIXUP_CLEVO_P950),
Signature · 1 line
2.53.0
Quoted 7 lines · James Waschbisch
On MSI systems with subsystem ID 1462:ec79 using the Realtek ALCS1200A codec, the rear line-out pins (
0x14,0x15,0x16) are parsed as line outputs but do not come up with active pin widget control after boot. This leaves analog output on the rear jacks unavailable until userspace manually reprograms the codec.
Quoted 7 lines
Add a board-specific fixup that disables line-out/speaker automute and forces pins
0x14,0x15, and0x16toPIN_OUTduringHDA_FIXUP_ACT_INIT, while also clearing the output amp mute on those nodes.Tested-on: MSI X570 Gaming Pro WiFi (1462:ec79, ALCS1200A)
Signed-off-by James Waschbisch <[email protected]>
When this kind of changes like the manual amp updates or pin control fiddling are needed, usually something else is missing. Could you give alsa-info.sh output for further investigation? Run the script with --no-upload option and attach the output.
thanks,
Takashi
Quoted 77 lines
--- sound/hda/codecs/realtek/alc882.c | 38 +++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+)sound/hda/codecs/realtek/alc882.c +38
-0@@ -60,6 +60,7 @@ enum {ALC887_FIXUP_ASUS_AUDIO ,ALC887_FIXUP_ASUS_HMIC ,ALCS1200A_FIXUP_MIC_VREF , +ALCS1200A_FIXUP_MSI_EC79 , ALC888VD_FIXUP_MIC_100VREF, };@@ -261,6 +262,36 @@ static void alc887_fixup_asus_jack(struct hda_codec *codec, spec->gen.hp_automute_hook = alc887_asus_hp_automute_hook; } +static void alcs1200a_fixup_msi_ec79 (struct hda_codec *codec, +const struct hda_fixup *fix,int action) +{ +struct alc_spec *spec = codec->spec; + +if (action ==HDA_FIXUP_ACT_PRE_PROBE ) { + spec->gen.automute_lo =0 ; + spec->gen.automute_speaker =0 ; +return ; + } + +if (action !=HDA_FIXUP_ACT_INIT ) +return ; + +/* Front / Surround / CLFE line-out pins */ +snd_hda_set_pin_ctl (codec,0x14 ,PIN_OUT ); +snd_hda_set_pin_ctl (codec,0x15 ,PIN_OUT ); +snd_hda_set_pin_ctl (codec,0x16 ,PIN_OUT ); + +/* Unmute both output amp channels on all three pins */ +snd_hda_codec_amp_update (codec,0x14 ,0 ,HDA_OUTPUT ,0 ,0x80 ,0 ); +snd_hda_codec_amp_update (codec,0x14 ,1 ,HDA_OUTPUT ,0 ,0x80 ,0 ); + +snd_hda_codec_amp_update (codec,0x15 ,0 ,HDA_OUTPUT ,0 ,0x80 ,0 ); +snd_hda_codec_amp_update (codec,0x15 ,1 ,HDA_OUTPUT ,0 ,0x80 ,0 ); + +snd_hda_codec_amp_update (codec,0x16 ,0 ,HDA_OUTPUT ,0 ,0x80 ,0 ); +snd_hda_codec_amp_update (codec,0x16 ,1 ,HDA_OUTPUT ,0 ,0x80 ,0 ); +} +static const struct hda_fixup alc882_fixups[] = { [ALC882_FIXUP_ABIT_AW9D_MAX ] = { .type =HDA_FIXUP_PINS ,@@ -553,6 +584,12 @@ static const struct hda_fixup alc882_fixups[] = { {} } }, + [ALCS1200A_FIXUP_MSI_EC79] = { + .type = HDA_FIXUP_FUNC, + .v.func = alcs1200a_fixup_msi_ec79, + .chained = true, + .chain_id = ALCS1200A_FIXUP_MIC_VREF, + }, [ALC888VD_FIXUP_MIC_100VREF] = { .type = HDA_FIXUP_PINCTLS, .v.pins = (const struct hda_pintbl[]) {@@ -636,6 +673,7 @@ static const struct hda_quirk alc882_fixup_tbl[] = {SND_PCI_QUIRK (0x1458 ,0xa0cd ,"Gigabyte X570 Aorus Master" ,ALC1220_FIXUP_GB_X570 ),SND_PCI_QUIRK (0x1458 ,0xa0ce ,"Gigabyte X570 Aorus Xtreme" ,ALC1220_FIXUP_GB_X570 ),SND_PCI_QUIRK (0x1458 ,0xa0d5 ,"Gigabyte X570S Aorus Master" ,ALC1220_FIXUP_GB_X570 ), +SND_PCI_QUIRK (0x1462 ,0xec79 ,"MSI ALCS1200A" ,ALCS1200A_FIXUP_MSI_EC79 ),SND_PCI_QUIRK (0x1462 ,0x11f7 ,"MSI-GE63" ,ALC1220_FIXUP_CLEVO_P950 ),SND_PCI_QUIRK (0x1462 ,0x1228 ,"MSI-GP63" ,ALC1220_FIXUP_CLEVO_P950 ), SND_PCI_QUIRK(0x1462, 0x1229, "MSI-GP73", ALC1220_FIXUP_CLEVO_P950),Signature · 1 line
2.53.0
Hello,
alsa-info output attached (--no-upload). Note: this was captured after applying a userspace workaround that forces pin-ctls=0x40 (PIN_OUT) on NID 0x14. Let me know if you'd prefer a capture from a clean boot state. Thanks,
Quoted 105 lines · Takashi Iwai
Quoted 7 lines · James Waschbisch
On MSI systems with subsystem ID 1462:ec79 using the Realtek ALCS1200A codec, the rear line-out pins (
0x14,0x15,0x16) are parsed as line outputs but do not come up with active pin widget control after boot. This leaves analog output on the rear jacks unavailable until userspace manually reprograms the codec.Quoted 7 lines
Add a board-specific fixup that disables line-out/speaker automute and forces pins
0x14,0x15, and0x16toPIN_OUTduringHDA_FIXUP_ACT_INIT, while also clearing the output amp mute on those nodes.Tested-on: MSI X570 Gaming Pro WiFi (1462:ec79, ALCS1200A)
Signed-off-by James Waschbisch <[email protected]>When this kind of changes like the manual amp updates or pin control fiddling are needed, usually something else is missing. Could you give
alsa-info.shoutput for further investigation? Run the script with --no-upload option and attach the output.thanks,
Takashi
Quoted 77 lines
--- sound/hda/codecs/realtek/alc882.c | 38 +++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+)sound/hda/codecs/realtek/alc882.c +38
-0@@ -60,6 +60,7 @@ enum {ALC887_FIXUP_ASUS_AUDIO ,ALC887_FIXUP_ASUS_HMIC ,ALCS1200A_FIXUP_MIC_VREF , +ALCS1200A_FIXUP_MSI_EC79 , ALC888VD_FIXUP_MIC_100VREF, };@@ -261,6 +262,36 @@ static void alc887_fixup_asus_jack(struct hda_codec *codec, spec->gen.hp_automute_hook = alc887_asus_hp_automute_hook; } +static void alcs1200a_fixup_msi_ec79 (struct hda_codec *codec, +const struct hda_fixup *fix,int action) +{ +struct alc_spec *spec = codec->spec; + +if (action ==HDA_FIXUP_ACT_PRE_PROBE ) { + spec->gen.automute_lo =0 ; + spec->gen.automute_speaker =0 ; +return ; + } + +if (action !=HDA_FIXUP_ACT_INIT ) +return ; + +/* Front / Surround / CLFE line-out pins */ +snd_hda_set_pin_ctl (codec,0x14 ,PIN_OUT ); +snd_hda_set_pin_ctl (codec,0x15 ,PIN_OUT ); +snd_hda_set_pin_ctl (codec,0x16 ,PIN_OUT ); + +/* Unmute both output amp channels on all three pins */ +snd_hda_codec_amp_update (codec,0x14 ,0 ,HDA_OUTPUT ,0 ,0x80 ,0 ); +snd_hda_codec_amp_update (codec,0x14 ,1 ,HDA_OUTPUT ,0 ,0x80 ,0 ); + +snd_hda_codec_amp_update (codec,0x15 ,0 ,HDA_OUTPUT ,0 ,0x80 ,0 ); +snd_hda_codec_amp_update (codec,0x15 ,1 ,HDA_OUTPUT ,0 ,0x80 ,0 ); + +snd_hda_codec_amp_update (codec,0x16 ,0 ,HDA_OUTPUT ,0 ,0x80 ,0 ); +snd_hda_codec_amp_update (codec,0x16 ,1 ,HDA_OUTPUT ,0 ,0x80 ,0 ); +} +static const struct hda_fixup alc882_fixups[] = { [ALC882_FIXUP_ABIT_AW9D_MAX ] = { .type =HDA_FIXUP_PINS ,@@ -553,6 +584,12 @@ static const struct hda_fixup alc882_fixups[] = { {} } }, + [ALCS1200A_FIXUP_MSI_EC79] = { + .type = HDA_FIXUP_FUNC, + .v.func = alcs1200a_fixup_msi_ec79, + .chained = true, + .chain_id = ALCS1200A_FIXUP_MIC_VREF, + }, [ALC888VD_FIXUP_MIC_100VREF] = { .type = HDA_FIXUP_PINCTLS, .v.pins = (const struct hda_pintbl[]) {@@ -636,6 +673,7 @@ static const struct hda_quirk alc882_fixup_tbl[] = {SND_PCI_QUIRK (0x1458 ,0xa0cd ,"Gigabyte X570 Aorus Master" ,ALC1220_FIXUP_GB_X570 ),SND_PCI_QUIRK (0x1458 ,0xa0ce ,"Gigabyte X570 Aorus Xtreme" ,ALC1220_FIXUP_GB_X570 ),SND_PCI_QUIRK (0x1458 ,0xa0d5 ,"Gigabyte X570S Aorus Master" ,ALC1220_FIXUP_GB_X570 ), +SND_PCI_QUIRK (0x1462 ,0xec79 ,"MSI ALCS1200A" ,ALCS1200A_FIXUP_MSI_EC79 ),SND_PCI_QUIRK (0x1462 ,0x11f7 ,"MSI-GE63" ,ALC1220_FIXUP_CLEVO_P950 ),SND_PCI_QUIRK (0x1462 ,0x1228 ,"MSI-GP63" ,ALC1220_FIXUP_CLEVO_P950 ), SND_PCI_QUIRK(0x1462, 0x1229, "MSI-GP73", ALC1220_FIXUP_CLEVO_P950),Signature · 1 line
2.53.0
Quoted 7 lines · James
Hello,
alsa-info output attached (--no-upload). Note: this was captured after applying a userspace workaround that
forces pin-ctls=0x40 (PIN_OUT) on NID0x14. Let me know if you'd prefer a capture from a clean boot state.
Yes, please give the clean state, too.
thanks,
Takashi
Quoted 116 lines
Thanks,
Signed-off-by James Waschbisch <[email protected]>On Mon, Mar 16, 2026, at 12:08 PM, Takashi Iwai wrote:
On Sun, 15 Mar 2026 11:19:50 +0100, James Waschbisch wrote: > > On MSI systems with subsystem ID 1462:ec79 using the Realtek ALCS1200A > codec, the rear line-out pins (0x14, 0x15, 0x16) are parsed as line > outputs but do not come up with active pin widget control after boot. > This leaves analog output on the rear jacks unavailable until userspace > manually reprograms the codec. > > Add a board-specific fixup that disables line-out/speaker automute and > forces pins 0x14, 0x15, and 0x16 to PIN_OUT during HDA_FIXUP_ACT_INIT, > while also clearing the output amp mute on those nodes. > > Tested-on: MSI X570 Gaming Pro WiFi (1462:ec79, ALCS1200A) > > Signed-off-by: James Waschbisch <[email protected]> When this kind of changes like the manual amp updates or pin control fiddling are needed, usually something else is missing. Could you give alsa-info.sh output for further investigation? Run the script with --no-upload option and attach the output. thanks, Takashi > --- > sound/hda/codecs/realtek/alc882.c | 38 +++++++++++++++++++++++++++++++ > 1 file changed, 38 insertions(+) > > diff --git a/sound/hda/codecs/realtek/alc882.c b/sound/hda/codecs/ realtek/alc882.c > index 529fecd5b..2bf266a25 100644 > --- a/sound/hda/codecs/realtek/alc882.c > +++ b/sound/hda/codecs/realtek/alc882.c > @@ -60,6 +60,7 @@ enum { > ALC887_FIXUP_ASUS_AUDIO, > ALC887_FIXUP_ASUS_HMIC, > ALCS1200A_FIXUP_MIC_VREF, > + ALCS1200A_FIXUP_MSI_EC79, > ALC888VD_FIXUP_MIC_100VREF, > }; > > @@ -261,6 +262,36 @@ static void alc887_fixup_asus_jack(struct hda_codec *codec, > spec->gen.hp_automute_hook = alc887_asus_hp_automute_hook; > } > > +static void alcs1200a_fixup_msi_ec79(struct hda_codec *codec, > + const struct hda_fixup *fix, int action) > +{ > + struct alc_spec *spec = codec->spec; > + > + if (action == HDA_FIXUP_ACT_PRE_PROBE) { > + spec->gen.automute_lo = 0; > + spec->gen.automute_speaker = 0; > + return; > + } > + > + if (action != HDA_FIXUP_ACT_INIT) > + return; > + > + /* Front / Surround / CLFE line-out pins */ > + snd_hda_set_pin_ctl(codec, 0x14, PIN_OUT); > + snd_hda_set_pin_ctl(codec, 0x15, PIN_OUT); > + snd_hda_set_pin_ctl(codec, 0x16, PIN_OUT); > + > + /* Unmute both output amp channels on all three pins */ > + snd_hda_codec_amp_update(codec, 0x14, 0, HDA_OUTPUT, 0, 0x80, 0); > + snd_hda_codec_amp_update(codec, 0x14, 1, HDA_OUTPUT, 0, 0x80, 0); > + > + snd_hda_codec_amp_update(codec, 0x15, 0, HDA_OUTPUT, 0, 0x80, 0); > + snd_hda_codec_amp_update(codec, 0x15, 1, HDA_OUTPUT, 0, 0x80, 0); > + > + snd_hda_codec_amp_update(codec, 0x16, 0, HDA_OUTPUT, 0, 0x80, 0); > + snd_hda_codec_amp_update(codec, 0x16, 1, HDA_OUTPUT, 0, 0x80, 0); > +} > + > static const struct hda_fixup alc882_fixups[] = { > [ALC882_FIXUP_ABIT_AW9D_MAX] = { > .type = HDA_FIXUP_PINS, > @@ -553,6 +584,12 @@ static const struct hda_fixup alc882_fixups[] = { > {} > } > }, > + [ALCS1200A_FIXUP_MSI_EC79] = { > + .type = HDA_FIXUP_FUNC, > + .v.func = alcs1200a_fixup_msi_ec79, > + .chained = true, > + .chain_id = ALCS1200A_FIXUP_MIC_VREF, > + }, > [ALC888VD_FIXUP_MIC_100VREF] = { > .type = HDA_FIXUP_PINCTLS, > .v.pins = (const struct hda_pintbl[]) { > @@ -636,6 +673,7 @@ static const struct hda_quirk alc882_fixup_tbl[] = { > SND_PCI_QUIRK(0x1458, 0xa0cd, "Gigabyte X570 Aorus Master", ALC1220_FIXUP_GB_X570), > SND_PCI_QUIRK(0x1458, 0xa0ce, "Gigabyte X570 Aorus Xtreme", ALC1220_FIXUP_GB_X570), > SND_PCI_QUIRK(0x1458, 0xa0d5, "Gigabyte X570S Aorus Master", ALC1220_FIXUP_GB_X570), > + SND_PCI_QUIRK(0x1462, 0xec79, "MSI ALCS1200A", ALCS1200A_FIXUP_MSI_EC79), > SND_PCI_QUIRK(0x1462, 0x11f7, "MSI-GE63", ALC1220_FIXUP_CLEVO_P950), > SND_PCI_QUIRK(0x1462, 0x1228, "MSI-GP63", ALC1220_FIXUP_CLEVO_P950), > SND_PCI_QUIRK(0x1462, 0x1229, "MSI-GP73", ALC1220_FIXUP_CLEVO_P950), > -- > 2.53.0 >
Quoted 5 lines · Takashi Iwai
Quoted 2 lines · James
Quoted 7 lines
Quoted 5 lines
Hello,
alsa-info output attached (--no-upload). Note: this was captured after applying a userspace workaround that
forces pin-ctls=0x40 (PIN_OUT) on NID0x14. Let me know if you'd prefer a capture from a clean boot state.Yes, please give the clean state, too.
... and I noticed that you didn't enable the proper codec drivers? Are CONFIG_SND_HDA_CODEC_ALC* enabled?
thanks,
Takashi
Quoted 122 lines
thanks,
Takashi
Quoted 116 lines
Thanks,
Signed-off-by James Waschbisch <[email protected]>On Mon, Mar 16, 2026, at 12:08 PM, Takashi Iwai wrote:
On Sun, 15 Mar 2026 11:19:50 +0100, James Waschbisch wrote: > > On MSI systems with subsystem ID 1462:ec79 using the Realtek ALCS1200A > codec, the rear line-out pins (0x14, 0x15, 0x16) are parsed as line > outputs but do not come up with active pin widget control after boot. > This leaves analog output on the rear jacks unavailable until userspace > manually reprograms the codec. > > Add a board-specific fixup that disables line-out/speaker automute and > forces pins 0x14, 0x15, and 0x16 to PIN_OUT during HDA_FIXUP_ACT_INIT, > while also clearing the output amp mute on those nodes. > > Tested-on: MSI X570 Gaming Pro WiFi (1462:ec79, ALCS1200A) > > Signed-off-by: James Waschbisch <[email protected]> When this kind of changes like the manual amp updates or pin control fiddling are needed, usually something else is missing. Could you give alsa-info.sh output for further investigation? Run the script with --no-upload option and attach the output. thanks, Takashi > --- > sound/hda/codecs/realtek/alc882.c | 38 +++++++++++++++++++++++++++++++ > 1 file changed, 38 insertions(+) > > diff --git a/sound/hda/codecs/realtek/alc882.c b/sound/hda/codecs/ realtek/alc882.c > index 529fecd5b..2bf266a25 100644 > --- a/sound/hda/codecs/realtek/alc882.c > +++ b/sound/hda/codecs/realtek/alc882.c > @@ -60,6 +60,7 @@ enum { > ALC887_FIXUP_ASUS_AUDIO, > ALC887_FIXUP_ASUS_HMIC, > ALCS1200A_FIXUP_MIC_VREF, > + ALCS1200A_FIXUP_MSI_EC79, > ALC888VD_FIXUP_MIC_100VREF, > }; > > @@ -261,6 +262,36 @@ static void alc887_fixup_asus_jack(struct hda_codec *codec, > spec->gen.hp_automute_hook = alc887_asus_hp_automute_hook; > } > > +static void alcs1200a_fixup_msi_ec79(struct hda_codec *codec, > + const struct hda_fixup *fix, int action) > +{ > + struct alc_spec *spec = codec->spec; > + > + if (action == HDA_FIXUP_ACT_PRE_PROBE) { > + spec->gen.automute_lo = 0; > + spec->gen.automute_speaker = 0; > + return; > + } > + > + if (action != HDA_FIXUP_ACT_INIT) > + return; > + > + /* Front / Surround / CLFE line-out pins */ > + snd_hda_set_pin_ctl(codec, 0x14, PIN_OUT); > + snd_hda_set_pin_ctl(codec, 0x15, PIN_OUT); > + snd_hda_set_pin_ctl(codec, 0x16, PIN_OUT); > + > + /* Unmute both output amp channels on all three pins */ > + snd_hda_codec_amp_update(codec, 0x14, 0, HDA_OUTPUT, 0, 0x80, 0); > + snd_hda_codec_amp_update(codec, 0x14, 1, HDA_OUTPUT, 0, 0x80, 0); > + > + snd_hda_codec_amp_update(codec, 0x15, 0, HDA_OUTPUT, 0, 0x80, 0); > + snd_hda_codec_amp_update(codec, 0x15, 1, HDA_OUTPUT, 0, 0x80, 0); > + > + snd_hda_codec_amp_update(codec, 0x16, 0, HDA_OUTPUT, 0, 0x80, 0); > + snd_hda_codec_amp_update(codec, 0x16, 1, HDA_OUTPUT, 0, 0x80, 0); > +} > + > static const struct hda_fixup alc882_fixups[] = { > [ALC882_FIXUP_ABIT_AW9D_MAX] = { > .type = HDA_FIXUP_PINS, > @@ -553,6 +584,12 @@ static const struct hda_fixup alc882_fixups[] = { > {} > } > }, > + [ALCS1200A_FIXUP_MSI_EC79] = { > + .type = HDA_FIXUP_FUNC, > + .v.func = alcs1200a_fixup_msi_ec79, > + .chained = true, > + .chain_id = ALCS1200A_FIXUP_MIC_VREF, > + }, > [ALC888VD_FIXUP_MIC_100VREF] = { > .type = HDA_FIXUP_PINCTLS, > .v.pins = (const struct hda_pintbl[]) { > @@ -636,6 +673,7 @@ static const struct hda_quirk alc882_fixup_tbl[] = { > SND_PCI_QUIRK(0x1458, 0xa0cd, "Gigabyte X570 Aorus Master", ALC1220_FIXUP_GB_X570), > SND_PCI_QUIRK(0x1458, 0xa0ce, "Gigabyte X570 Aorus Xtreme", ALC1220_FIXUP_GB_X570), > SND_PCI_QUIRK(0x1458, 0xa0d5, "Gigabyte X570S Aorus Master", ALC1220_FIXUP_GB_X570), > + SND_PCI_QUIRK(0x1462, 0xec79, "MSI ALCS1200A", ALCS1200A_FIXUP_MSI_EC79), > SND_PCI_QUIRK(0x1462, 0x11f7, "MSI-GE63", ALC1220_FIXUP_CLEVO_P950), > SND_PCI_QUIRK(0x1462, 0x1228, "MSI-GP63", ALC1220_FIXUP_CLEVO_P950), > SND_PCI_QUIRK(0x1462, 0x1229, "MSI-GP73", ALC1220_FIXUP_CLEVO_P950), > -- > 2.53.0 >
Hello,
Attached is a clean state dump with my modifications removed. I think the previous alsa-info dump was misleading as some kernel modifications were still left over from my testing and causing the wrong module to load, but I now have a clean install of the kernel and have disabled my userspace patch.
Quoted 146 lines · Takashi Iwai
Quoted 5 lines · Takashi Iwai
Quoted 2 lines · James
Quoted 7 lines
Quoted 5 lines
Hello,
alsa-info output attached (--no-upload). Note: this was captured after applying a userspace workaround that
forces pin-ctls=0x40 (PIN_OUT) on NID0x14. Let me know if you'd prefer a capture from a clean boot state.Yes, please give the clean state, too.
... and I noticed that you didn't enable the proper codec drivers? Are CONFIG_SND_HDA_CODEC_ALC* enabled?
thanks,
Takashi
Quoted 122 lines
thanks,
Takashi
Quoted 116 lines
Thanks,
Signed-off-by James Waschbisch <[email protected]>On Mon, Mar 16, 2026, at 12:08 PM, Takashi Iwai wrote:
On Sun, 15 Mar 2026 11:19:50 +0100, James Waschbisch wrote: > > On MSI systems with subsystem ID 1462:ec79 using the Realtek ALCS1200A > codec, the rear line-out pins (0x14, 0x15, 0x16) are parsed as line > outputs but do not come up with active pin widget control after boot. > This leaves analog output on the rear jacks unavailable until userspace > manually reprograms the codec. > > Add a board-specific fixup that disables line-out/speaker automute and > forces pins 0x14, 0x15, and 0x16 to PIN_OUT during HDA_FIXUP_ACT_INIT, > while also clearing the output amp mute on those nodes. > > Tested-on: MSI X570 Gaming Pro WiFi (1462:ec79, ALCS1200A) > > Signed-off-by: James Waschbisch <[email protected]> When this kind of changes like the manual amp updates or pin control fiddling are needed, usually something else is missing. Could you give alsa-info.sh output for further investigation? Run the script with --no-upload option and attach the output. thanks, Takashi > --- > sound/hda/codecs/realtek/alc882.c | 38 +++++++++++++++++++++++++++++++ > 1 file changed, 38 insertions(+) > > diff --git a/sound/hda/codecs/realtek/alc882.c b/sound/hda/codecs/ realtek/alc882.c > index 529fecd5b..2bf266a25 100644 > --- a/sound/hda/codecs/realtek/alc882.c > +++ b/sound/hda/codecs/realtek/alc882.c > @@ -60,6 +60,7 @@ enum { > ALC887_FIXUP_ASUS_AUDIO, > ALC887_FIXUP_ASUS_HMIC, > ALCS1200A_FIXUP_MIC_VREF, > + ALCS1200A_FIXUP_MSI_EC79, > ALC888VD_FIXUP_MIC_100VREF, > }; > > @@ -261,6 +262,36 @@ static void alc887_fixup_asus_jack(struct hda_codec *codec, > spec->gen.hp_automute_hook = alc887_asus_hp_automute_hook; > } > > +static void alcs1200a_fixup_msi_ec79(struct hda_codec *codec, > + const struct hda_fixup *fix, int action) > +{ > + struct alc_spec *spec = codec->spec; > + > + if (action == HDA_FIXUP_ACT_PRE_PROBE) { > + spec->gen.automute_lo = 0; > + spec->gen.automute_speaker = 0; > + return; > + } > + > + if (action != HDA_FIXUP_ACT_INIT) > + return; > + > + /* Front / Surround / CLFE line-out pins */ > + snd_hda_set_pin_ctl(codec, 0x14, PIN_OUT); > + snd_hda_set_pin_ctl(codec, 0x15, PIN_OUT); > + snd_hda_set_pin_ctl(codec, 0x16, PIN_OUT); > + > + /* Unmute both output amp channels on all three pins */ > + snd_hda_codec_amp_update(codec, 0x14, 0, HDA_OUTPUT, 0, 0x80, 0); > + snd_hda_codec_amp_update(codec, 0x14, 1, HDA_OUTPUT, 0, 0x80, 0); > + > + snd_hda_codec_amp_update(codec, 0x15, 0, HDA_OUTPUT, 0, 0x80, 0); > + snd_hda_codec_amp_update(codec, 0x15, 1, HDA_OUTPUT, 0, 0x80, 0); > + > + snd_hda_codec_amp_update(codec, 0x16, 0, HDA_OUTPUT, 0, 0x80, 0); > + snd_hda_codec_amp_update(codec, 0x16, 1, HDA_OUTPUT, 0, 0x80, 0); > +} > + > static const struct hda_fixup alc882_fixups[] = { > [ALC882_FIXUP_ABIT_AW9D_MAX] = { > .type = HDA_FIXUP_PINS, > @@ -553,6 +584,12 @@ static const struct hda_fixup alc882_fixups[] = { > {} > } > }, > + [ALCS1200A_FIXUP_MSI_EC79] = { > + .type = HDA_FIXUP_FUNC, > + .v.func = alcs1200a_fixup_msi_ec79, > + .chained = true, > + .chain_id = ALCS1200A_FIXUP_MIC_VREF, > + }, > [ALC888VD_FIXUP_MIC_100VREF] = { > .type = HDA_FIXUP_PINCTLS, > .v.pins = (const struct hda_pintbl[]) { > @@ -636,6 +673,7 @@ static const struct hda_quirk alc882_fixup_tbl[] = { > SND_PCI_QUIRK(0x1458, 0xa0cd, "Gigabyte X570 Aorus Master", ALC1220_FIXUP_GB_X570), > SND_PCI_QUIRK(0x1458, 0xa0ce, "Gigabyte X570 Aorus Xtreme", ALC1220_FIXUP_GB_X570), > SND_PCI_QUIRK(0x1458, 0xa0d5, "Gigabyte X570S Aorus Master", ALC1220_FIXUP_GB_X570), > + SND_PCI_QUIRK(0x1462, 0xec79, "MSI ALCS1200A", ALCS1200A_FIXUP_MSI_EC79), > SND_PCI_QUIRK(0x1462, 0x11f7, "MSI-GE63", ALC1220_FIXUP_CLEVO_P950), > SND_PCI_QUIRK(0x1462, 0x1228, "MSI-GP63", ALC1220_FIXUP_CLEVO_P950), > SND_PCI_QUIRK(0x1462, 0x1229, "MSI-GP73", ALC1220_FIXUP_CLEVO_P950), > -- > 2.53.0 >
Quoted 7 lines · James
Hello,
Attached is a clean state dump with my modifications removed. I think the previous alsa-info dump was misleading as some kernel modifications were still left over from my testing and causing the wrong module to load, but I now have a clean install of the kernel and have disabled my userspace patch.
Thanks, this looks better.
And, could you elaborate what exactly doesn't work with the unpatched kernel? It looks like that the driver probes fine and recognizes NIDs 0x14, 0x15 and 0x16 properly. Isn't it just a matter of your mixer setup?
Takashi