staging: rtl8723bs: refactor rtw_aes_decrypt() to reduce nesting
PATCH 1/1 staging: rtl8723bs: refactor rtw_aes_decrypt() to reduce nesting
Improve code readability by refactoring rtw_aes_decrypt() to use guard clauses and early exits. This reduces the maximum indentation level and flattens the logic flow for key assignment and decryption.
--- drivers/staging/rtl8723bs/core/rtw_security.c | 91 ++++++++++--------- 1 file changed, 46 insertions(+), 45 deletions(-)
drivers/staging/rtl8723bs/core/rtw_security.c +46 -45
@@ -1213,69 +1213,70 @@ u32 rtw_aes_decrypt(struct adapter *padapter, u8 *precvframe) pframe = (unsigned char *)((union recv_frame *)precvframe)->u.hdr.rx_data;/* 4 start to encrypt each fragment */ -if (prxattrib->encrypt == _AES_) { - stainfo =rtw_get_stainfo (&padapter->stapriv, &prxattrib->ta[0 ]); -if (stainfo) { -if (is_multicast_ether_addr (prxattrib->ra)) { -static unsigned long start; -static u32 no_gkey_bc_cnt; -static u32 no_gkey_mc_cnt; +if (prxattrib->encrypt != _AES_) + goto exit; -if (!psecuritypriv->binstallGrpkey) { - res = _FAIL; + stainfo =rtw_get_stainfo (&padapter->stapriv, &prxattrib->ta[0 ]); +if (!stainfo) { + res = _FAIL; + goto exit; + } +if (is_multicast_ether_addr (prxattrib->ra)) { +static unsigned long start; +static u32 no_gkey_bc_cnt; +static u32 no_gkey_mc_cnt; -if (start ==0 ) - start = jiffies; +if (!psecuritypriv->binstallGrpkey) { + res = _FAIL; -if (is_broadcast_mac_addr (prxattrib->ra)) - no_gkey_bc_cnt++; -else - no_gkey_mc_cnt++; +if (start ==0 ) + start = jiffies; -if (jiffies_to_msecs (jiffies - start) >1000 ) { -if (no_gkey_bc_cnt || no_gkey_mc_cnt) { -netdev_dbg (padapter->pnetdev, -FUNC_ADPT_FMT " no_gkey_bc_cnt:%u, no_gkey_mc_cnt:%u\n" , -FUNC_ADPT_ARG (padapter), - no_gkey_bc_cnt, - no_gkey_mc_cnt); - } - start = jiffies; - no_gkey_bc_cnt =0 ; - no_gkey_mc_cnt =0 ; - } - - goto exit; - } +if (is_broadcast_mac_addr (prxattrib->ra)) + no_gkey_bc_cnt++; +else + no_gkey_mc_cnt++; +if (jiffies_to_msecs (jiffies - start) >1000 ) {if (no_gkey_bc_cnt || no_gkey_mc_cnt) {netdev_dbg (padapter->pnetdev, -FUNC_ADPT_FMT " gkey installed. no_gkey_bc_cnt:%u, no_gkey_mc_cnt:%u\n" , -FUNC_ADPT_ARG (padapter), - no_gkey_bc_cnt, +FUNC_ADPT_FMT " no_gkey_bc_cnt:%u, no_gkey_mc_cnt:%u\n" , +FUNC_ADPT_ARG (padapter), no_gkey_bc_cnt, no_gkey_mc_cnt); } - start =0 ; + start = jiffies; no_gkey_bc_cnt =0 ; no_gkey_mc_cnt =0 ; - - prwskey = psecuritypriv->dot118021XGrpKey[prxattrib->key_index].skey; -if (psecuritypriv->dot118021XGrpKeyid != prxattrib->key_index) { - res = _FAIL; - goto exit; - } - }else { - prwskey = &stainfo->dot118021x_UncstKey.skey[0 ]; } - length = ((union recv_frame *)precvframe)->u.hdr.len - prxattrib->hdrlen - prxattrib->iv_len; + goto exit; + } - res =aes_decipher (prwskey, prxattrib->hdrlen, pframe, length); +if (no_gkey_bc_cnt || no_gkey_mc_cnt) { +netdev_dbg (padapter->pnetdev, +FUNC_ADPT_FMT " gkey installed. no_gkey_bc_cnt:%u, no_gkey_mc_cnt:%u\n" , +FUNC_ADPT_ARG (padapter), no_gkey_bc_cnt, + no_gkey_mc_cnt); + } + start =0 ; + no_gkey_bc_cnt =0 ; + no_gkey_mc_cnt =0 ; - }else { + prwskey = psecuritypriv->dot118021XGrpKey[prxattrib->key_index] + .skey; +if (psecuritypriv->dot118021XGrpKeyid != prxattrib->key_index) { res = _FAIL; + goto exit; } + }else { + prwskey = &stainfo->dot118021x_UncstKey.skey[0 ]; } + + length = ((union recv_frame *)precvframe)->u.hdr.len - + prxattrib->hdrlen - prxattrib->iv_len; + + res =aes_decipher (prwskey, prxattrib->hdrlen, pframe, length); + exit:return res; }
Signature · 1 line
2.34.1
Greg KH
maintainerQuoted 8 lines · Lin YuChen
Improve code readability by refactoring
rtw_aes_decrypt()to use guard clauses and early exits. This reduces the maximum indentation level and flattens the logic flow for key assignment and decryption.Signed-off-by Lin YuChen <[email protected]>--- drivers/staging/rtl8723bs/core/rtw_security.c | 91 ++++++++++--------- 1 file changed, 46 insertions(+), 45 deletions(-)
Please make this a patch series, moving the indentation in by one "level" at a time, otherwise this is impossible to review to verify that you have not changed the logic incorrectly here.
Would you want to review this as-is? :)
thanks,
greg k-h
v2 cover staging: rtl8723bs: refactor rtw_aes_decrypt()
This series refactors rtw_aes_decrypt() to reduce nesting levels by using guard clauses. As requested by Greg, the refactoring is split into two steps to make the logic changes easier to verify.
Patch 1: Introduce guard clause for AES encryption check. Patch 2: Introduce guard clause for stainfo check.
Lin YuChen (2):
staging: rtl8723bs: use guard clause for AES check
staging: rtl8723bs: use guard clause for stainfo check
drivers/staging/rtl8723bs/core/rtw_security.c | 91 +++++++++---------- 1 file changed, 45 insertions(+), 46 deletions(-)
Signature · 1 line
2.34.1
PATCH v2 1/2 staging: rtl8723bs: use guard clause for AES check
Refactor the AES encryption check by using a guard clause to reduce the indentation level of the subsequent logic.
--- drivers/staging/rtl8723bs/core/rtw_security.c | 107 +++++++++--------- 1 file changed, 55 insertions(+), 52 deletions(-)
drivers/staging/rtl8723bs/core/rtw_security.c +55 -52
@@ -1213,68 +1213,71 @@ u32 rtw_aes_decrypt(struct adapter *padapter, u8 *precvframe) pframe = (unsigned char *)((union recv_frame *)precvframe)->u.hdr.rx_data;/* 4 start to encrypt each fragment */ -if (prxattrib->encrypt == _AES_) { - stainfo =rtw_get_stainfo (&padapter->stapriv, &prxattrib->ta[0 ]); -if (stainfo) { -if (is_multicast_ether_addr (prxattrib->ra)) { -static unsigned long start; -static u32 no_gkey_bc_cnt; -static u32 no_gkey_mc_cnt; - -if (!psecuritypriv->binstallGrpkey) { - res = _FAIL; +if (prxattrib->encrypt != _AES_) + goto exit; + stainfo =rtw_get_stainfo (&padapter->stapriv, &prxattrib->ta[0 ]); +if (stainfo) { +if (is_multicast_ether_addr (prxattrib->ra)) { +static unsigned long start; +static u32 no_gkey_bc_cnt; +static u32 no_gkey_mc_cnt; + +if (!psecuritypriv->binstallGrpkey) { + res = _FAIL; -if (start ==0 ) - start = jiffies; +if (start ==0 ) + start = jiffies; -if (is_broadcast_mac_addr (prxattrib->ra)) - no_gkey_bc_cnt++; -else - no_gkey_mc_cnt++; - -if (jiffies_to_msecs (jiffies - start) >1000 ) { -if (no_gkey_bc_cnt || no_gkey_mc_cnt) { -netdev_dbg (padapter->pnetdev, -FUNC_ADPT_FMT " no_gkey_bc_cnt:%u, no_gkey_mc_cnt:%u\n" , -FUNC_ADPT_ARG (padapter), - no_gkey_bc_cnt, - no_gkey_mc_cnt); - } - start = jiffies; - no_gkey_bc_cnt =0 ; - no_gkey_mc_cnt =0 ; +if (is_broadcast_mac_addr (prxattrib->ra)) + no_gkey_bc_cnt++; +else + no_gkey_mc_cnt++; + +if (jiffies_to_msecs (jiffies - start) >1000 ) { +if (no_gkey_bc_cnt || no_gkey_mc_cnt) { +netdev_dbg (padapter->pnetdev, +FUNC_ADPT_FMT " no_gkey_bc_cnt:%u, no_gkey_mc_cnt:%u\n" , +FUNC_ADPT_ARG (padapter), no_gkey_bc_cnt, + no_gkey_mc_cnt); } - - goto exit; + start = jiffies; + no_gkey_bc_cnt =0 ; + no_gkey_mc_cnt =0 ; } -if (no_gkey_bc_cnt || no_gkey_mc_cnt) { -netdev_dbg (padapter->pnetdev, -FUNC_ADPT_FMT " gkey installed. no_gkey_bc_cnt:%u, no_gkey_mc_cnt:%u\n" , -FUNC_ADPT_ARG (padapter), - no_gkey_bc_cnt, - no_gkey_mc_cnt); - } - start =0 ; - no_gkey_bc_cnt =0 ; - no_gkey_mc_cnt =0 ; + goto exit; + } - prwskey = psecuritypriv->dot118021XGrpKey[prxattrib->key_index].skey; -if (psecuritypriv->dot118021XGrpKeyid != prxattrib->key_index) { - res = _FAIL; - goto exit; - } - }else { - prwskey = &stainfo->dot118021x_UncstKey.skey[0 ]; +if (no_gkey_bc_cnt || no_gkey_mc_cnt) { +netdev_dbg (padapter->pnetdev, +FUNC_ADPT_FMT " gkey installed. no_gkey_bc_cnt:%u, no_gkey_mc_cnt:%u\n" , +FUNC_ADPT_ARG (padapter), no_gkey_bc_cnt, + no_gkey_mc_cnt); + } + start =0 ; + no_gkey_bc_cnt =0 ; + no_gkey_mc_cnt =0 ; + + prwskey = + psecuritypriv + ->dot118021XGrpKey[prxattrib->key_index] + .skey; +if (psecuritypriv->dot118021XGrpKeyid != + prxattrib->key_index) { + res = _FAIL; + goto exit; } + }else { + prwskey = &stainfo->dot118021x_UncstKey.skey[0 ]; + } - length = ((union recv_frame *)precvframe)->u.hdr.len - prxattrib->hdrlen - prxattrib->iv_len; + length = ((union recv_frame *)precvframe)->u.hdr.len - + prxattrib->hdrlen - prxattrib->iv_len; - res =aes_decipher (prwskey, prxattrib->hdrlen, pframe, length); + res =aes_decipher (prwskey, prxattrib->hdrlen, pframe, length); - }else { - res = _FAIL; - } + }else { + res = _FAIL; } exit:return res;
Signature · 1 line
2.34.1
Re: [PATCH v2 1/2] staging: rtl8723bs: use guard clause for AES check
Quoted 5 lines · Lin YuChen
Refactor the AES encryption check by using a guard clause to reduce the indentation level of the subsequent logic.
Signed-off-by Lin YuChen <[email protected]>---
Let's do it a little bit differently. See the other email I just sent to v1.
regards,
dan carpenter
v3 cover staging: rtl8723bs: refactor rtw_aes_decrypt()
This series refactors rtw_aes_decrypt() to improve code readability by reducing nesting levels through the use of guard clauses.
Changes in v3:
- Follow Dan Carpenter's suggestion to use direct returns (e.g., return _SUCCESS or _FAIL) instead of "goto exit" for the newly introduced guard clauses.
- Revert unrelated line-breaking and formatting changes to ensure the patch remains focused strictly on the refactoring of indentation levels, as advised by Dan.
- Keep the two-step patch series structure requested by Greg KH.
Changes in v2:
- Split the refactor into a two-patch series to make logic verification easier, as requested by Greg KH.
Lin YuChen (2):
staging: rtl8723bs: use guard clause for AES check
staging: rtl8723bs: use guard clause for stainfo check
drivers/staging/rtl8723bs/core/rtw_security.c | 86 +++++++++---------- 1 file changed, 42 insertions(+), 44 deletions(-)
Signature · 1 line
2.34.1
PATCH v3 1/2 staging: rtl8723bs: use guard clause for AES check
Refactor the AES encryption check by using a guard clause to reduce the indentation level of the subsequent logic.
---
v3: Use "return _SUCCESS" instead of "goto exit".
v2: This is a new patch split from the original v1.
drivers/staging/rtl8723bs/core/rtw_security.c | 104 +++++++++--------- 1 file changed, 52 insertions(+), 52 deletions(-)
drivers/staging/rtl8723bs/core/rtw_security.c +52 -52
@@ -1213,68 +1213,68 @@ u32 rtw_aes_decrypt(struct adapter *padapter, u8 *precvframe) pframe = (unsigned char *)((union recv_frame *)precvframe)->u.hdr.rx_data;/* 4 start to encrypt each fragment */ -if (prxattrib->encrypt == _AES_) { - stainfo =rtw_get_stainfo (&padapter->stapriv, &prxattrib->ta[0 ]); -if (stainfo) { -if (is_multicast_ether_addr (prxattrib->ra)) { -static unsigned long start; -static u32 no_gkey_bc_cnt; -static u32 no_gkey_mc_cnt; - -if (!psecuritypriv->binstallGrpkey) { - res = _FAIL; - -if (start ==0 ) - start = jiffies; +if (prxattrib->encrypt != _AES_) +return _SUCCESS; + stainfo =rtw_get_stainfo (&padapter->stapriv, &prxattrib->ta[0 ]); +if (stainfo) { +if (is_multicast_ether_addr (prxattrib->ra)) { +static unsigned long start; +static u32 no_gkey_bc_cnt; +static u32 no_gkey_mc_cnt; + +if (!psecuritypriv->binstallGrpkey) { + res = _FAIL; -if (is_broadcast_mac_addr (prxattrib->ra)) - no_gkey_bc_cnt++; -else - no_gkey_mc_cnt++; +if (start ==0 ) + start = jiffies; -if (jiffies_to_msecs (jiffies - start) >1000 ) { -if (no_gkey_bc_cnt || no_gkey_mc_cnt) { -netdev_dbg (padapter->pnetdev, -FUNC_ADPT_FMT " no_gkey_bc_cnt:%u, no_gkey_mc_cnt:%u\n" , -FUNC_ADPT_ARG (padapter), - no_gkey_bc_cnt, - no_gkey_mc_cnt); - } - start = jiffies; - no_gkey_bc_cnt =0 ; - no_gkey_mc_cnt =0 ; +if (is_broadcast_mac_addr (prxattrib->ra)) + no_gkey_bc_cnt++; +else + no_gkey_mc_cnt++; + +if (jiffies_to_msecs (jiffies - start) >1000 ) { +if (no_gkey_bc_cnt || no_gkey_mc_cnt) { +netdev_dbg (padapter->pnetdev, +FUNC_ADPT_FMT " no_gkey_bc_cnt:%u, no_gkey_mc_cnt:%u\n" , +FUNC_ADPT_ARG (padapter), + no_gkey_bc_cnt, + no_gkey_mc_cnt); } - - goto exit; + start = jiffies; + no_gkey_bc_cnt =0 ; + no_gkey_mc_cnt =0 ; } -if (no_gkey_bc_cnt || no_gkey_mc_cnt) { -netdev_dbg (padapter->pnetdev, -FUNC_ADPT_FMT " gkey installed. no_gkey_bc_cnt:%u, no_gkey_mc_cnt:%u\n" , -FUNC_ADPT_ARG (padapter), - no_gkey_bc_cnt, - no_gkey_mc_cnt); - } - start =0 ; - no_gkey_bc_cnt =0 ; - no_gkey_mc_cnt =0 ; - - prwskey = psecuritypriv->dot118021XGrpKey[prxattrib->key_index].skey; -if (psecuritypriv->dot118021XGrpKeyid != prxattrib->key_index) { - res = _FAIL; - goto exit; - } - }else { - prwskey = &stainfo->dot118021x_UncstKey.skey[0 ]; + goto exit; } - length = ((union recv_frame *)precvframe)->u.hdr.len - prxattrib->hdrlen - prxattrib->iv_len; - - res =aes_decipher (prwskey, prxattrib->hdrlen, pframe, length); +if (no_gkey_bc_cnt || no_gkey_mc_cnt) { +netdev_dbg (padapter->pnetdev, +FUNC_ADPT_FMT " gkey installed. no_gkey_bc_cnt:%u, no_gkey_mc_cnt:%u\n" , +FUNC_ADPT_ARG (padapter), + no_gkey_bc_cnt, + no_gkey_mc_cnt); + } + start =0 ; + no_gkey_bc_cnt =0 ; + no_gkey_mc_cnt =0 ; + prwskey = psecuritypriv->dot118021XGrpKey[prxattrib->key_index].skey; +if (psecuritypriv->dot118021XGrpKeyid != prxattrib->key_index) { + res = _FAIL; + goto exit; + } }else { - res = _FAIL; + prwskey = &stainfo->dot118021x_UncstKey.skey[0 ]; } + + length = ((union recv_frame *)precvframe)->u.hdr.len - prxattrib->hdrlen - prxattrib->iv_len; + + res =aes_decipher (prwskey, prxattrib->hdrlen, pframe, length); + + }else { + res = _FAIL; } exit:return res;
Signature · 1 line
2.34.1
PATCH v3 2/2 staging: rtl8723bs: use guard clause for stainfo check
In reply to Lin YuChenContinue the refactor of rtw_aes_decrypt() by introducing a guard clause for the stainfo check. This allows the subsequent multicast and unicast decryption logic to be moved one indentation level to the left, further improving code readability.
---
v3: Use "return _FAIL" instead of "res = _FAIL; goto exit" for the stainfo
guard clause.
v3: Revert unrelated formatting and line-breaking changes (e.g., in
netdev_dbg calls) to keep the diff focused only on indentation changes, as suggested by Dan Carpenter.
v2: Split the refactoring into a separate patch to make it easier to
verify logic changes.
drivers/staging/rtl8723bs/core/rtw_security.c | 96 +++++++++---------- 1 file changed, 47 insertions(+), 49 deletions(-)
drivers/staging/rtl8723bs/core/rtw_security.c +47 -49
@@ -1216,66 +1216,64 @@ u32 rtw_aes_decrypt(struct adapter *padapter, u8 *precvframe)if (prxattrib->encrypt != _AES_)return _SUCCESS; stainfo =rtw_get_stainfo (&padapter->stapriv, &prxattrib->ta[0 ]); -if (stainfo) { -if (is_multicast_ether_addr (prxattrib->ra)) { -static unsigned long start; -static u32 no_gkey_bc_cnt; -static u32 no_gkey_mc_cnt; - -if (!psecuritypriv->binstallGrpkey) { - res = _FAIL; +if (stainfo) +return _FAIL; +if (is_multicast_ether_addr (prxattrib->ra)) { +static unsigned long start; +static u32 no_gkey_bc_cnt; +static u32 no_gkey_mc_cnt; -if (start ==0 ) - start = jiffies; +if (!psecuritypriv->binstallGrpkey) { + res = _FAIL; -if (is_broadcast_mac_addr (prxattrib->ra)) - no_gkey_bc_cnt++; -else - no_gkey_mc_cnt++; - -if (jiffies_to_msecs (jiffies - start) >1000 ) { -if (no_gkey_bc_cnt || no_gkey_mc_cnt) { -netdev_dbg (padapter->pnetdev, -FUNC_ADPT_FMT " no_gkey_bc_cnt:%u, no_gkey_mc_cnt:%u\n" , -FUNC_ADPT_ARG (padapter), - no_gkey_bc_cnt, - no_gkey_mc_cnt); - } - start = jiffies; - no_gkey_bc_cnt =0 ; - no_gkey_mc_cnt =0 ; - } +if (start ==0 ) + start = jiffies; - goto exit; - } +if (is_broadcast_mac_addr (prxattrib->ra)) + no_gkey_bc_cnt++; +else + no_gkey_mc_cnt++; -if (no_gkey_bc_cnt || no_gkey_mc_cnt) { -netdev_dbg (padapter->pnetdev, -FUNC_ADPT_FMT " gkey installed. no_gkey_bc_cnt:%u, no_gkey_mc_cnt:%u\n" , -FUNC_ADPT_ARG (padapter), - no_gkey_bc_cnt, - no_gkey_mc_cnt); +if (jiffies_to_msecs (jiffies - start) >1000 ) { +if (no_gkey_bc_cnt || no_gkey_mc_cnt) { +netdev_dbg (padapter->pnetdev, +FUNC_ADPT_FMT " no_gkey_bc_cnt:%u, no_gkey_mc_cnt:%u\n" , +FUNC_ADPT_ARG (padapter), + no_gkey_bc_cnt, + no_gkey_mc_cnt); + } + start = jiffies; + no_gkey_bc_cnt =0 ; + no_gkey_mc_cnt =0 ; } - start =0 ; - no_gkey_bc_cnt =0 ; - no_gkey_mc_cnt =0 ; - prwskey = psecuritypriv->dot118021XGrpKey[prxattrib->key_index].skey; -if (psecuritypriv->dot118021XGrpKeyid != prxattrib->key_index) { - res = _FAIL; - goto exit; - } - }else { - prwskey = &stainfo->dot118021x_UncstKey.skey[0 ]; + goto exit; } - length = ((union recv_frame *)precvframe)->u.hdr.len - prxattrib->hdrlen - prxattrib->iv_len; - - res =aes_decipher (prwskey, prxattrib->hdrlen, pframe, length); +if (no_gkey_bc_cnt || no_gkey_mc_cnt) { +netdev_dbg (padapter->pnetdev, +FUNC_ADPT_FMT " gkey installed. no_gkey_bc_cnt:%u, no_gkey_mc_cnt:%u\n" , +FUNC_ADPT_ARG (padapter), + no_gkey_bc_cnt, + no_gkey_mc_cnt); + } + start =0 ; + no_gkey_bc_cnt =0 ; + no_gkey_mc_cnt =0 ; + prwskey = psecuritypriv->dot118021XGrpKey[prxattrib->key_index].skey; +if (psecuritypriv->dot118021XGrpKeyid != prxattrib->key_index) { + res = _FAIL; + goto exit; + } }else { - res = _FAIL; + prwskey = &stainfo->dot118021x_UncstKey.skey[0 ]; } + + length = ((union recv_frame *)precvframe)->u.hdr.len - prxattrib->hdrlen - prxattrib->iv_len; + + res =aes_decipher (prwskey, prxattrib->hdrlen, pframe, length); + exit:return res; }
Signature · 1 line
2.34.1
Re: [PATCH v3 0/2] staging: rtl8723bs: refactor rtw_aes_decrypt()
In reply to Lin YuChenQuoted 10 lines · Lin YuChen
This series refactors
rtw_aes_decrypt()to improve code readability by reducing nesting levels through the use of guard clauses.Changes in v3:
- Follow Dan Carpenter's suggestion to use direct returns (e.g., return_SUCCESSor_FAIL) instead of "goto exit" for the newly introduced guard clauses.
- Revert unrelated line-breaking and formatting changes to ensure the patch remains focused strictly on the refactoring of indentation levels, as advised by Dan.
Thanks.
You don't have to do this if you don't want, but unrelated to your patch but the last two bytes of &le_tmp64 in rtw_BIP_verify() should be initialized. Just set it to zero at the start of the function. Otherwise it's an uninitialized variable.
drivers/staging/rtl8723bs/core/rtw_security.c:1308 rtw_BIP_verify() warn: not copying enough bytes for '&le_tmp64' (8 vs 6 bytes)
regards,
dan carpenter
Re: [PATCH v3 0/2] staging: rtl8723bs: refactor rtw_aes_decrypt()
Quoted 5 lines · Dan Carpenter
Thanks.
Reviewed-by Dan Carpenter <[email protected]>
Thanks for the Reviewed-by!
Quoted 9 lines
You don't have to do this if you don't want, but unrelated to your patch but the last two bytes of
&le_tmp64inrtw_BIP_verify()should be initialized. Just set it to zero at the start of the function. Otherwise it's an uninitialized variable.
drivers/staging/rtl8723bs/core/rtw_security.c:1308rtw_BIP_verify()warn: not copying enough bytes for '&le_tmp64' (8 vs 6 bytes)regards,
dan carpenter
I will send a separate patch to initialize le_tmp64 in rtw_BIP_verify() as you suggested.
Regards,
Lin YuChen
PATCH v2 2/2 staging: rtl8723bs: use guard clause for stainfo check
In reply to Lin YuChenContinue the refactor of rtw_aes_decrypt() by introducing a guard clause for the stainfo check. This allows the subsequent multicast and unicast decryption logic to be moved one indentation level to the left, further improving code readability.
--- drivers/staging/rtl8723bs/core/rtw_security.c | 100 +++++++++--------- 1 file changed, 48 insertions(+), 52 deletions(-)
drivers/staging/rtl8723bs/core/rtw_security.c +48 -52
@@ -1216,69 +1216,65 @@ u32 rtw_aes_decrypt(struct adapter *padapter, u8 *precvframe)if (prxattrib->encrypt != _AES_) goto exit; stainfo =rtw_get_stainfo (&padapter->stapriv, &prxattrib->ta[0 ]); -if (stainfo) { -if (is_multicast_ether_addr (prxattrib->ra)) { -static unsigned long start; -static u32 no_gkey_bc_cnt; -static u32 no_gkey_mc_cnt; +if (!stainfo) { + res = _FAIL; + goto exit; + } +if (is_multicast_ether_addr (prxattrib->ra)) { +static unsigned long start; +static u32 no_gkey_bc_cnt; +static u32 no_gkey_mc_cnt; -if (!psecuritypriv->binstallGrpkey) { - res = _FAIL; +if (!psecuritypriv->binstallGrpkey) { + res = _FAIL; -if (start ==0 ) - start = jiffies; +if (start ==0 ) + start = jiffies; -if (is_broadcast_mac_addr (prxattrib->ra)) - no_gkey_bc_cnt++; -else - no_gkey_mc_cnt++; - -if (jiffies_to_msecs (jiffies - start) >1000 ) { -if (no_gkey_bc_cnt || no_gkey_mc_cnt) { -netdev_dbg (padapter->pnetdev, -FUNC_ADPT_FMT " no_gkey_bc_cnt:%u, no_gkey_mc_cnt:%u\n" , -FUNC_ADPT_ARG (padapter), no_gkey_bc_cnt, - no_gkey_mc_cnt); - } - start = jiffies; - no_gkey_bc_cnt =0 ; - no_gkey_mc_cnt =0 ; - } +if (is_broadcast_mac_addr (prxattrib->ra)) + no_gkey_bc_cnt++; +else + no_gkey_mc_cnt++; - goto exit; +if (jiffies_to_msecs (jiffies - start) >1000 ) { +if (no_gkey_bc_cnt || no_gkey_mc_cnt) { +netdev_dbg (padapter->pnetdev, +FUNC_ADPT_FMT " no_gkey_bc_cnt:%u, no_gkey_mc_cnt:%u\n" , +FUNC_ADPT_ARG (padapter), no_gkey_bc_cnt, + no_gkey_mc_cnt); + } + start = jiffies; + no_gkey_bc_cnt =0 ; + no_gkey_mc_cnt =0 ; } -if (no_gkey_bc_cnt || no_gkey_mc_cnt) { -netdev_dbg (padapter->pnetdev, -FUNC_ADPT_FMT " gkey installed. no_gkey_bc_cnt:%u, no_gkey_mc_cnt:%u\n" , -FUNC_ADPT_ARG (padapter), no_gkey_bc_cnt, - no_gkey_mc_cnt); - } - start =0 ; - no_gkey_bc_cnt =0 ; - no_gkey_mc_cnt =0 ; - - prwskey = - psecuritypriv - ->dot118021XGrpKey[prxattrib->key_index] - .skey; -if (psecuritypriv->dot118021XGrpKeyid != - prxattrib->key_index) { - res = _FAIL; - goto exit; - } - }else { - prwskey = &stainfo->dot118021x_UncstKey.skey[0 ]; + goto exit; } - length = ((union recv_frame *)precvframe)->u.hdr.len - - prxattrib->hdrlen - prxattrib->iv_len; - - res =aes_decipher (prwskey, prxattrib->hdrlen, pframe, length); +if (no_gkey_bc_cnt || no_gkey_mc_cnt) { +netdev_dbg (padapter->pnetdev, +FUNC_ADPT_FMT " gkey installed. no_gkey_bc_cnt:%u, no_gkey_mc_cnt:%u\n" , +FUNC_ADPT_ARG (padapter), no_gkey_bc_cnt, + no_gkey_mc_cnt); + } + start =0 ; + no_gkey_bc_cnt =0 ; + no_gkey_mc_cnt =0 ; + prwskey = psecuritypriv->dot118021XGrpKey[prxattrib->key_index] + .skey; +if (psecuritypriv->dot118021XGrpKeyid != prxattrib->key_index) { + res = _FAIL; + goto exit; + } }else { - res = _FAIL; + prwskey = &stainfo->dot118021x_UncstKey.skey[0 ]; } + + length = ((union recv_frame *)precvframe)->u.hdr.len - + prxattrib->hdrlen - prxattrib->iv_len; + + res =aes_decipher (prwskey, prxattrib->hdrlen, pframe, length); exit:return res; }
Signature · 1 line
2.34.1
What often happens is that I write a review email and then decide not to send it. I probably would have merged your patch as-is, but since Greg has decided not to then we as well fix this as well.
Quoted 16 lines · Lin YuChen
Improve code readability by refactoring
rtw_aes_decrypt()to use guard clauses and early exits. This reduces the maximum indentation level and flattens the logic flow for key assignment and decryption.Signed-off-by Lin YuChen <[email protected]>--- drivers/staging/rtl8723bs/core/rtw_security.c | 91 ++++++++++--------- 1 file changed, 46 insertions(+), 45 deletions(-)drivers/staging/rtl8723bs/core/rtw_security.c +0
-0@@ -1213,69 +1213,70 @@ u32 rtw_aes_decrypt(struct adapter *padapter, u8 *precvframe) pframe = (unsigned char *)((union recv_frame *)precvframe)->u.hdr.rx_data;
drivers/staging/rtl8723bs/core/rtw_security.c u32 rtw_aes_decrypt(struct adapter *padapter, u8 *precvframe) · line 1217
Quoted 10 lines
drivers/staging/rtl8723bs/core/rtw_security.c +2
-7/* 4 start to encrypt each fragment */ -if (prxattrib->encrypt == _AES_) { - stainfo =rtw_get_stainfo (&padapter->stapriv, &prxattrib->ta[0 ]); -if (stainfo) { -if (is_multicast_ether_addr (prxattrib->ra)) { -static unsigned long start; -static u32 no_gkey_bc_cnt; -static u32 no_gkey_mc_cnt; +if (prxattrib->encrypt != _AES_) + goto exit;
Just return directly. When I'm reading this patch, I have to think "Oh, what does goto exit do?" So I scroll down to the bottom, and I see it returns res. So then I scroll up here and I think "what is res?" but it's not included in the email. Compare that to just doing "return _SUCCESS;" where anyone can instantly see what it does without scrolling up and down and changing to a different window.
drivers/staging/rtl8723bs/core/rtw_security.c u32 rtw_aes_decrypt(struct adapter *padapter, u8 *precvframe) · line 1223
Quoted 8 lines
drivers/staging/rtl8723bs/core/rtw_security.c +5
-2-if (!psecuritypriv->binstallGrpkey) { - res = _FAIL; + stainfo =rtw_get_stainfo (&padapter->stapriv, &prxattrib->ta[0 ]); +if (!stainfo) { + res = _FAIL; + goto exit; + }
Same. Just return directly.
Quoted 21 lines
drivers/staging/rtl8723bs/core/rtw_security.c +8
-10+if (is_multicast_ether_addr (prxattrib->ra)) { +static unsigned long start; +static u32 no_gkey_bc_cnt; +static u32 no_gkey_mc_cnt; -if (start ==0 ) - start = jiffies; +if (!psecuritypriv->binstallGrpkey) { + res = _FAIL; -if (is_broadcast_mac_addr (prxattrib->ra)) - no_gkey_bc_cnt++; -else - no_gkey_mc_cnt++; +if (start ==0 ) + start = jiffies; -if (jiffies_to_msecs (jiffies - start) >1000 ) { -if (no_gkey_bc_cnt || no_gkey_mc_cnt) { - netdev_dbg(padapter->pnetdev, - FUNC_ADPT_FMT " no_gkey_bc_cnt:%u, no_gkey_mc_cnt:%u\n",
drivers/staging/rtl8723bs/core/rtw_security.c u32 rtw_aes_decrypt(struct adapter *padapter, u8 *precvframe) · line 1248
Quoted 10 lines
drivers/staging/rtl8723bs/core/rtw_security.c +0
-10-FUNC_ADPT_ARG (padapter), - no_gkey_bc_cnt, - no_gkey_mc_cnt); - } - start = jiffies; - no_gkey_bc_cnt =0 ; - no_gkey_mc_cnt =0 ; - } - - goto exit;
Leave this goto exit because changing it would be an unrelated change. The line is that adding a new goto is related because you were either going to add a return or a goto. Changing existing code is an unrelated change and we want to leave those lines as-is except for pulling them in a tab.
Quoted 48 lines
drivers/staging/rtl8723bs/core/rtw_security.c +21
-16- } +if (is_broadcast_mac_addr (prxattrib->ra)) + no_gkey_bc_cnt++; +else + no_gkey_mc_cnt++; +if (jiffies_to_msecs (jiffies - start) >1000 ) {if (no_gkey_bc_cnt || no_gkey_mc_cnt) {netdev_dbg (padapter->pnetdev, -FUNC_ADPT_FMT " gkey installed. no_gkey_bc_cnt:%u, no_gkey_mc_cnt:%u\n" , -FUNC_ADPT_ARG (padapter), - no_gkey_bc_cnt, +FUNC_ADPT_FMT " no_gkey_bc_cnt:%u, no_gkey_mc_cnt:%u\n" , +FUNC_ADPT_ARG (padapter), no_gkey_bc_cnt, no_gkey_mc_cnt); } - start =0 ; + start = jiffies; no_gkey_bc_cnt =0 ; no_gkey_mc_cnt =0 ; - - prwskey = psecuritypriv->dot118021XGrpKey[prxattrib->key_index].skey; -if (psecuritypriv->dot118021XGrpKeyid != prxattrib->key_index) { - res = _FAIL; - goto exit; - } - }else { - prwskey = &stainfo->dot118021x_UncstKey.skey[0 ]; } - length = ((union recv_frame *)precvframe)->u.hdr.len - prxattrib->hdrlen - prxattrib->iv_len; + goto exit; + } - res =aes_decipher (prwskey, prxattrib->hdrlen, pframe, length); +if (no_gkey_bc_cnt || no_gkey_mc_cnt) { +netdev_dbg (padapter->pnetdev, +FUNC_ADPT_FMT " gkey installed. no_gkey_bc_cnt:%u, no_gkey_mc_cnt:%u\n" , +FUNC_ADPT_ARG (padapter), no_gkey_bc_cnt, + no_gkey_mc_cnt); + } + start =0 ; + no_gkey_bc_cnt =0 ; + no_gkey_mc_cnt =0 ; - }else { + prwskey = psecuritypriv->dot118021XGrpKey[prxattrib->key_index] + .skey;
drivers/staging/rtl8723bs/core/rtw_security.c u32 rtw_aes_decrypt(struct adapter *padapter, u8 *precvframe) · line 1276
Quoted 10 lines
drivers/staging/rtl8723bs/core/rtw_security.c +7
-0+if (psecuritypriv->dot118021XGrpKeyid != prxattrib->key_index) { res = _FAIL; + goto exit; } + }else { + prwskey = &stainfo->dot118021x_UncstKey.skey[0 ]; } + + length = ((union recv_frame *)precvframe)->u.hdr.len - + prxattrib->hdrlen - prxattrib->iv_len;
Checkpatch wants you to break this line up, but it wasn't broken up in the original code so that's an unrelated change.
regards,
dan carpenter
Quoted 8 lines
drivers/staging/rtl8723bs/core/rtw_security.c +3
-0+ + res =aes_decipher (prwskey, prxattrib->hdrlen, pframe, length); + exit:return res; }Signature · 1 line
2.34.1