s390: Improve this_cpu operations
Subsystems (3)
Heiko Carstens
maintainerv2 cover s390: Improve this_cpu operations
v2:
- Add proper PERCPU_PTR cast to most patches to avoid tons of sparse warnings
- Add missing __packed attribute to insn structure [Sashiko [2]]
- Fix inverted if condition [Sashiko [2]]
- Add missing user_mode() check [Sashiko [2]]
- Move percpu_entry() call in front of irqentry_enter() call in all entry paths to avoid that potential this_cpu() operations overwrite the not-yet saved percpu code section indicator [Sashiko [2]]
[2] https://sashiko.dev/#/patchset/20260317195436.2276810-1-hca%40linux.ibm.com
v1:
This is a follow-up to Peter Zijlstra's in-kernel rseq RFC [1].
With the intended removal of PREEMPT_NONE this_cpu operations based on atomic instructions, guarded with preempt_disable()/preempt_enable() pairs, become more expensive: the preempt_disable() / preempt_enable() pairs are not optimized away anymore during compile time.
In particular the conditional call to preempt_schedule_notrace() after preempt_enable() adds additional code and register pressure.
To avoid this Peter suggested an in-kernel rseq approach. While this would certainly work, this series tries to come up with a solution which uses less instructions and doesn't require to repeat instruction sequences.
The idea is that this_cpu operations based on atomic instructions are guarded with mvyi instructions:
- The first mvyi instruction writes the register number, which contains the percpu address variable to lowcore. This also indicates that a percpu code section is executed.
- The first instruction following the mvyi instruction must be the ag instruction which adds the percpu offset to the percpu address register.
- Afterwards the atomic percpu operation follows.
- Then a second mvyi instruction writes a zero to lowcore, which indicates the end of the percpu code section.
- In case of an interrupt/exception/nmi the register number which was written to lowcore is copied to the exception frame (pt_regs), and a zero is written to lowcore.
- On return to the previous context it is checked if a percpu code section was executed (saved register number not zero), and if the process was migrated to a different cpu. If the percpu offset was already added to the percpu address register (instruction address does _not_ point to the ag instruction) the content of the percpu address register is adjusted so it points to percpu variable of the new cpu.
All of this seems to work, but of course it could still be broken since I missed some detail.
In total this series results in a kernel text size reduction of ~106kb. The number of preempt_schedule_notrace() call sites is reduced from 7089 to 1577.
Note: this comes without any huge performance analysis, however all microbenchmarks confirmed that the new code is at least as fast as the old code, like expected.
Heiko Carstens (9):
s390/percpu: Provide arch_raw_cpu_ptr()
s390/alternatives: Add new ALT_TYPE_PERCPU type s390/percpu: Infrastructure for more efficient this_cpu operations s390/percpu: Use new percpu code section for arch_this_cpu_add() s390/percpu: Use new percpu code section for arch_this_cpu_add_return() s390/percpu: Use new percpu code section for arch_this_cpu_[and|or]() s390/percpu: Provide arch_this_cpu_read() implementation s390/percpu: Provide arch_this_cpu_write() implementation s390/percpu: Remove one and two byte this_cpu operation implementation
arch/s390/boot/alternative.c | 7 + arch/s390/include/asm/alternative.h | 5 + arch/s390/include/asm/entry-percpu.h | 57 ++++++ arch/s390/include/asm/lowcore.h | 3 +- arch/s390/include/asm/percpu.h | 259 ++++++++++++++++++++++----- arch/s390/include/asm/ptrace.h | 2 + arch/s390/kernel/alternative.c | 25 ++- arch/s390/kernel/irq.c | 17 +- arch/s390/kernel/nmi.c | 3 + arch/s390/kernel/traps.c | 3 + 10 files changed, 330 insertions(+), 51 deletions(-) create mode 100644 arch/s390/include/asm/entry-percpu.h
Signature · 1 line
2.51.0
Heiko Carstens
maintainerPATCH v2 1/9 s390/percpu: Provide arch_raw_cpu_ptr()
Provide an s390 specific arch_raw_cpu_ptr() implementation which avoids the detour over get_lowcore() to get the lowcore pointer. The inline assembly is implemented with an alternative so that relocated lowcore (percpu offset is at a different address) is handled correctly.
This turns code like this
102f78: a7 39 00 00 lghi %r3,0 102f7c: e3 20 33 b8 00 08 ag %r2,952(%r3)
which adds the percpu offset to register r2 into a single instruction
102f7c: e3 20 33 b8 00 08 ag %r2,952(%r0)
and also avoids the need of a base register, thus reducing register pressure.
With defconfig bloat-o-meter -t provides this result:
add/remove: 12/26 grow/shrink: 183/3391 up/down: 14880/-41950 (-27070)
--- arch/s390/include/asm/percpu.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
arch/s390/include/asm/percpu.h +18 -0
@@ -12,6 +12,24 @@*/ #define __my_cpu_offset get_lowcore()->percpu_offset +#define arch_raw_cpu_ptr (_ptr) \ +({ \ + unsigned long lc_percpu, tcp_ptr__; \ + \ + tcp_ptr__ = (__force unsigned long)(_ptr); \ + lc_percpu = offsetof(struct lowcore, percpu_offset); \ + asm_inline volatile( \ + ALTERNATIVE("ag %[__ptr__],%[offzero](%%r0)\n", \ + "ag %[__ptr__],%[offalt](%%r0)\n", \ + ALT_FEATURE(MFEATURE_LOWCORE)) \ + : [__ptr__] "+d" (tcp_ptr__) \ + : [offzero] "i" (lc_percpu), \ + [offalt] "i" (lc_percpu + LOWCORE_ALT_ADDRESS), \ + "m" (((struct lowcore *)0)->percpu_offset) \ + : "cc"); \ + (TYPEOF_UNQUAL(*(_ptr)) __force __kernel *)tcp_ptr__; \ +}) +/* * We use a compare-and-swap loop since that uses less cpu cycles than * disabling and enabling interrupts like the generic variant would do.
Signature · 1 line
2.51.0
Heiko Carstens
maintainerPATCH v2 2/9 s390/alternatives: Add new ALT_TYPE_PERCPU type
In reply to Heiko CarstensThe upcoming percpu section code uses two mviy instructions to guard the beginning and end of a percpu code section.
The first mviy instruction writes the register number, which contains the percpu address to lowcore. This indicates both the beginning of a percpu code section and which register contains the percpu address.
During compile time the mvyi instruction is generated in a way that its base register contains the percpu register, and the immediate field is zero. This needs to be patched so that the base register is zero, and the immediate field contains the register number. For example
101424: eb 00 23 c0 00 52 mviy 960(%r2),0
needs to be patched to
101424: eb 20 03 c0 00 52 mviy 960(%r0),2
Provide a new ALT_TYPE_PERCPU alternative type which handles this specific instruction patching. In addition it also handles the relocated lowcore case, where the displacement of the mviy instruction has a different value.
--- arch/s390/boot/alternative.c | 7 +++++++ arch/s390/include/asm/alternative.h | 5 +++++ arch/s390/kernel/alternative.c | 25 +++++++++++++++++++++++-- 3 files changed, 35 insertions(+), 2 deletions(-)
arch/s390/boot/alternative.c +7 -0
@@ -22,6 +22,9 @@ static void alt_debug_all(int type)case ALT_TYPE_SPEC : alt_debug.spec =1 ;break ; +case ALT_TYPE_PERCPU : + alt_debug.percpu =1 ; +break ; } }
@@ -115,6 +118,7 @@ void alt_debug_setup(char *str)alt_debug_all (ALT_TYPE_FACILITY );alt_debug_all (ALT_TYPE_FEATURE );alt_debug_all (ALT_TYPE_SPEC ); +alt_debug_all (ALT_TYPE_PERCPU );return ; }while (*str) {
@@ -130,6 +134,9 @@ void alt_debug_setup(char *str)case ALT_TYPE_SPEC :alt_debug_all (ALT_TYPE_SPEC );break ; +case ALT_TYPE_PERCPU : +alt_debug_all (ALT_TYPE_PERCPU ); +break ; }if (*str !=';' )break ;
arch/s390/include/asm/alternative.h +5 -0
@@ -34,6 +34,7 @@#define ALT_TYPE_FACILITY 0#define ALT_TYPE_FEATURE 1#define ALT_TYPE_SPEC 2 +#define ALT_TYPE_PERCPU 3#define ALT_DATA_SHIFT 0#define ALT_TYPE_SHIFT 20
@@ -51,6 +52,10 @@ ALT_TYPE_SPEC << ALT_TYPE_SHIFT | \ (facility) << ALT_DATA_SHIFT) +#define ALT_PERCPU (num) (ALT_CTX_EARLY << ALT_CTX_SHIFT | \ + ALT_TYPE_PERCPU << ALT_TYPE_SHIFT | \ + (num) << ALT_DATA_SHIFT) +#ifndef __ASSEMBLER__#include <linux/types.h>
arch/s390/kernel/alternative.c +23 -2
@@ -28,6 +28,7 @@ struct alt_debug {unsigned long facilities[MAX_FACILITY_BIT /BITS_PER_LONG ];unsigned long mfeatures[MAX_MFEATURE_BIT /BITS_PER_LONG ];int spec; +int percpu; };static struct alt_debug __bootdata_preserved (alt_debug );
@@ -48,8 +49,18 @@ static void alternative_dump(u8 *old, u8 *new, unsigned int len, unsigned int tya_debug ("[%d/%3d] %016lx: %s -> %s\n" , type, data, kptr, oinsn, ninsn); } +struct insn_siy { +u64 opc1 :8 ; +u64 i2 :8 ; +u64 b1 :4 ; +u64 dl1 :12 ; +u64 dh1 :8 ; +u64 opc2 :8 ; +} __packed; +void __apply_alternatives (struct alt_instr *start,struct alt_instr *end,unsigned int ctx) { +struct insn_siy insn_siy;struct alt_debug *d;struct alt_instr *a;bool debug, replace;
@@ -63,6 +74,8 @@ void __apply_alternatives(struct alt_instr *start, struct alt_instr *end, unsignfor (a = start; a < end; a++) {if (!(a->ctx & ctx))continue ; + old = (u8 *)&a->instr_offset + a->instr_offset; + new = (u8 *)&a->repl_offset + a->repl_offset;switch (a->type) {case ALT_TYPE_FACILITY : replace =test_facility (a->data);
@@ -76,14 +89,22 @@ void __apply_alternatives(struct alt_instr *start, struct alt_instr *end, unsign replace =nobp_enabled (); debug = d->spec;break ; +case ALT_TYPE_PERCPU : + replace = true; + insn_siy = *(struct insn_siy *)old; +if (test_machine_feature (MFEATURE_LOWCORE )) + insn_siy = *(struct insn_siy *)new; + insn_siy.i2 = insn_siy.b1; + insn_siy.b1 =0 ; + new = (u8 *)&insn_siy; + debug = d->percpu; +break ;default : replace = false; debug = false; }if (!replace)continue ; - old = (u8 *)&a->instr_offset + a->instr_offset; - new = (u8 *)&a->repl_offset + a->repl_offset;if (debug)alternative_dump (old, new, a->instrlen, a->type, a->data);s390_kernel_write (old, new, a->instrlen);
Signature · 1 line
2.51.0
Heiko Carstens
maintainerPATCH v2 3/9 s390/percpu: Infrastructure for more efficient this_cpu operations
In reply to Heiko CarstensWith the intended removal of PREEMPT_NONE this_cpu operations based on atomic instructions, guarded with preempt_disable()/preempt_enable() pairs become more expensive: the preempt_disable() / preempt_enable() pairs are not optimized away anymore during compile time.
In particular the conditional call to preempt_schedule_notrace() after preempt_enable() adds additional code and register pressure.
E.g. this simple C code sequence
DEFINE_PER_CPU(long, foo);
long bar(long a) { return this_cpu_add_return(foo, a); }
generates this code:
11a976: eb af f0 68 00 24 stmg %r10,%r15,104(%r15) 11a97c: b9 04 00 ef lgr %r14,%r15 11a980: b9 04 00 b2 lgr %r11,%r2 11a984: e3 f0 ff c8 ff 71 lay %r15,-56(%r15) 11a98a: e3 e0 f0 98 00 24 stg %r14,152(%r15) 11a990: eb 01 03 a8 00 6a asi 936,1 <- __preempt_count_add(1) 11a996: c0 10 00 d2 ac b5 larl %r1,1b70300 <- address of percpu var 11a9a0: e3 10 23 b8 00 08 ag %r1,952 <- add percpu offset 11a9a6: eb ab 10 00 00 e8 laag %r10,%r11,0(%r1) <- atomic op 11a9ac: eb ff 03 a8 00 6e alsi 936,-1 <- __preempt_count_dec_and_test() 11a9b2: a7 54 00 05 jnhe 11a9bc <bar+0x4c> 11a9b6: c0 e5 00 76 d1 bd brasl %r14,ff4d30 <preempt_schedule_notrace> 11a9bc: b9 e8 b0 2a agrk %r2,%r10,%r11 11a9c0: eb af f0 a0 00 04 lmg %r10,%r15,160(%r15) 11a9c6 07 fe br %r14
Even though the above example is more or less the worst case, since the branch to preempt_schedule_notrace() requires a stackframe, which otherwise wouldn't be necessary, there is also the conditional jnhe branch instruction.
Get rid of the conditional branch with the following code sequence:
11a8e6: c0 30 00 d0 c5 0d larl %r3,1b33300 11a8ec: b9 04 00 43 lgr %r4,%r3 11a8f0: eb 00 43 c0 00 52 mviy 960,4 11a8f6: e3 40 03 b8 00 08 ag %r4,952 11a8fc: eb 52 40 00 00 e8 laag %r5,%r2,0(%r4) 11a902: eb 00 03 c0 00 52 mviy 960,0 11a908: b9 08 00 25 agr %r2,%r5 11a90c 07 fe br %r14
The general idea is that this_cpu operations based on atomic instructions are guarded with mvyi instructions:
- The first mvyi instruction writes the register number, which contains the percpu address variable to lowcore. This also indicates that a percpu code section is executed.
- The first instruction following the mvyi instruction must be the ag instruction which adds the percpu offset to the percpu address register.
- Afterwards the atomic percpu operation follows.
- Then a second mvyi instruction writes a zero to lowcore, which indicates the end of the percpu code section.
- In case of an interrupt/exception/nmi the register number which was written to lowcore is copied to the exception frame (pt_regs), and a zero is written to lowcore.
- On return to the previous context it is checked if a percpu code section was executed (saved register number not zero), and if the process was migrated to a different cpu. If the percpu offset was already added to the percpu address register (instruction address does _not_ point to the ag instruction) the content of the percpu address register is adjusted so it points to percpu variable of the new cpu.
--- arch/s390/include/asm/entry-percpu.h | 57 ++++++++++++++++++++++++++++ arch/s390/include/asm/lowcore.h | 3 +- arch/s390/include/asm/percpu.h | 54 ++++++++++++++++++++++++++ arch/s390/include/asm/ptrace.h | 2 + arch/s390/kernel/irq.c | 17 +++++++-- arch/s390/kernel/nmi.c | 3 ++ arch/s390/kernel/traps.c | 3 ++ 7 files changed, 134 insertions(+), 5 deletions(-) create mode 100644 arch/s390/include/asm/entry-percpu.h
arch/s390/include/asm/entry-percpu.h new file +57 -0
@@ -0,0 +1,57 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef ARCH_S390_ENTRY_PERCPU_H +#define ARCH_S390_ENTRY_PERCPU_H + +#include <linux/percpu.h> +#include <asm/lowcore.h> +#include <asm/ptrace.h> +#include <asm/asm-offsets.h> + +static __always_inline void percpu_entry(struct pt_regs *regs) +{ +struct lowcore *lc =get_lowcore (); + +if (user_mode (regs)) +return ; + regs->cpu = lc->cpu_nr; + regs->percpu_register = lc->percpu_register; + lc->percpu_register =0 ; +} + +static __always_inline void percpu_exit(struct pt_regs *regs) +{ +struct lowcore *lc =get_lowcore (); +unsigned int insn, disp; +unsigned char reg; + +if (user_mode (regs)) +return ; + reg = regs->percpu_register; +if (!reg) +return ; + lc->percpu_register = reg; +if (regs->cpu == lc->cpu_nr) +return ; +/* +* Within a percpu code section and process has been migrated to +* a different CPU. Check if the percpu base register needs to be +* updated. This is the case if the PSW does not point to the ADD +* instruction within the section +* - AG %rx,percpu_offset_in_lowcore(%r0,%r0) +* which adds the percpu offset to the percpu base register. +*/ +if ((*(u16 *)psw_bits (regs->psw).ia &0xff0f ) !=0xe300 ) + goto fixup; + disp = offsetof(struct lowcore , percpu_offset); +if (machine_has_relocated_lowcore ()) + disp +=LOWCORE_ALT_ADDRESS ; + insn = (disp &0xff000 ) >>4 | (disp &0x00fff ) <<16 |0x8 ; +if (*(u32 *)(psw_bits (regs->psw).ia +2 ) != insn) +return ; +fixup: +/* Fixup percpu base register */ + regs->gprs[reg] -= __per_cpu_offset[regs->cpu]; + regs->gprs[reg] += lc->percpu_offset; +} + +#endif
arch/s390/include/asm/lowcore.h +2 -1
@@ -165,7 +165,8 @@ struct lowcore {__u32 spinlock_index;/* 0x03b0 */ __u8 pad_0x03b4[0x03b8 -0x03b4 ];/* 0x03b4 */ __u64 percpu_offset;/* 0x03b8 */ -__u8 pad_0x03c0[0x0400 -0x03c0 ];/* 0x03c0 */ +__u8 percpu_register;/* 0x03c0 */ +__u8 pad_0x03c1[0x0400 -0x03c1 ];/* 0x03c1 */ __u32 return_lpswe;/* 0x0400 */ __u32 return_mcck_lpswe;/* 0x0404 */
arch/s390/include/asm/percpu.h +54 -0
60 lines not on this page · raw message
arch/s390/include/asm/ptrace.h +2 -0
@@ -134,6 +134,8 @@ struct pt_regs { };unsigned long flags;unsigned long last_break; +unsigned int cpu; +unsigned char percpu_register; };/*
arch/s390/kernel/irq.c +13 -4
@@ -33,6 +33,7 @@#include <asm/softirq_stack.h> #include <asm/vtime.h> #include <asm/asm.h> +#include <asm/entry-percpu.h> #include "entry.h" DEFINE_PER_CPU_SHARED_ALIGNED(struct irq_stat, irq_stat);
@@ -142,10 +143,13 @@ static int irq_pending(struct pt_regs *regs) void noinstr do_io_irq(struct pt_regs *regs) { -irqentry_state_t state =irqentry_enter (regs); -struct pt_regs *old_regs =set_irq_regs (regs); +struct pt_regs *old_regs; +irqentry_state_t state;bool from_idle; +percpu_entry (regs); + state =irqentry_enter (regs); + old_regs =set_irq_regs (regs); from_idle =test_and_clear_cpu_flag (CIF_ENABLED_WAIT );if (from_idle)update_timer_idle ();
@@ -177,14 +181,18 @@ void noinstr do_io_irq(struct pt_regs *regs)if (from_idle) regs->psw.mask &= ~(PSW_MASK_EXT |PSW_MASK_IO |PSW_MASK_WAIT ); +percpu_exit (regs); } void noinstr do_ext_irq(struct pt_regs *regs) { -irqentry_state_t state =irqentry_enter (regs); -struct pt_regs *old_regs =set_irq_regs (regs); +struct pt_regs *old_regs; +irqentry_state_t state;bool from_idle; +percpu_entry (regs); + state =irqentry_enter (regs); + old_regs =set_irq_regs (regs); from_idle =test_and_clear_cpu_flag (CIF_ENABLED_WAIT );if (from_idle)update_timer_idle ();
@@ -212,6 +220,7 @@ void noinstr do_ext_irq(struct pt_regs *regs)if (from_idle) regs->psw.mask &= ~(PSW_MASK_EXT |PSW_MASK_IO |PSW_MASK_WAIT ); +percpu_exit (regs); }static void show_msi_interrupt (struct seq_file *p,int irq)
arch/s390/kernel/nmi.c +3 -0
@@ -22,6 +22,7 @@#include <linux/module.h> #include <linux/sched/signal.h> #include <linux/kvm_host.h> +#include <asm/entry-percpu.h> #include <asm/lowcore.h> #include <asm/ctlreg.h> #include <asm/fpu.h>
@@ -374,6 +375,7 @@ void notrace s390_do_machine_check(struct pt_regs *regs)unsigned long mcck_dam_code;int mcck_pending =0 ; +percpu_entry (regs); irq_state =irqentry_nmi_enter (regs);if (user_mode (regs))
@@ -496,6 +498,7 @@ void notrace s390_do_machine_check(struct pt_regs *regs)schedule_mcck_handler ();irqentry_nmi_exit (regs, irq_state); +percpu_exit (regs); }NOKPROBE_SYMBOL (s390_do_machine_check);
arch/s390/kernel/traps.c +3 -0
@@ -24,6 +24,7 @@#include <linux/entry-common.h> #include <linux/kmsan.h> #include <linux/bug.h> +#include <asm/entry-percpu.h> #include <asm/asm-extable.h> #include <asm/irqflags.h> #include <asm/ptrace.h>
@@ -349,6 +350,7 @@ void noinstr __do_pgm_check(struct pt_regs *regs) current->thread.gmap_int_code = regs->int_code &0xffff ;return ; } +percpu_entry (regs); state =irqentry_enter (regs);if (user_mode (regs)) {update_timer_sys ();
@@ -386,6 +388,7 @@ void noinstr __do_pgm_check(struct pt_regs *regs) out:local_irq_disable ();irqentry_exit (regs, state); +percpu_exit (regs); }/*
Signature · 1 line
2.51.0
Heiko Carstens
maintainerPATCH v2 4/9 s390/percpu: Use new percpu code section for arch_this_cpu_add()
In reply to Heiko CarstensConvert arch_this_cpu_add() to make use of the new percpu code section infrastructure.
With this the text size of the kernel image is reduced by ~76kb (defconfig). Also more than 5300 generated preempt_schedule_notrace() function calls within the kernel image (modules not counted) are removed.
With:
DEFINE_PER_CPU(long, foo);
void bar(long a) { this_cpu_add(foo, a); }
Old arch_this_cpu_add() looks like this:
00000000000000c0 <bar>:
c0: c0 04 00 00 00 00 jgnop c0 <bar>
c6: eb 01 03 a8 00 6a asi 936,1
cc: c4 18 00 00 00 00 lgrl %r1,cc <bar+0xc>
ce: R_390_GOTENT foo+0x2
d2: e3 10 03 b8 00 08 ag %r1,952
d8: eb 22 10 00 00 e8 laag %r2,%r2,0(%r1)
de: eb ff 03 a8 00 6e alsi 936,-1
e4: a7 a4 00 05 jhe ee <bar+0x2e>
e8: c0 f4 00 00 00 00 jg e8 <bar+0x28>
ea: R_390_PC32DBL __s390_indirect_jump_r14+0x2
ee: c0 f4 00 00 00 00 jg ee <bar+0x2e>
f0: R_390_PLT32DBL preempt_schedule_notrace+0x2New arch_this_cpu_add() looks like this:
00000000000000c0 <bar>:
c0: c0 04 00 00 00 00 jgnop c0 <bar>
c6: c4 38 00 00 00 00 lgrl %r3,c6 <bar+0x6>
c8: R_390_GOTENT foo+0x2
cc: b9 04 00 43 lgr %r4,%r3
d0: eb 00 43 c0 00 52 mviy 960(%r4),0
d6: e3 40 03 b8 00 08 ag %r4,952
dc: eb 52 40 00 00 e8 laag %r5,%r2,0(%r4)
e2: eb 00 03 c0 00 52 mviy 960,0
e8: c0 f4 00 00 00 00 jg e8 <bar+0x28>
ea: R_390_PC32DBL __s390_indirect_jump_r14+0x2Note that the conditional function call is removed.
--- arch/s390/include/asm/percpu.h | 65 ++++++++++++++++++++++------------ 1 file changed, 43 insertions(+), 22 deletions(-)
arch/s390/include/asm/percpu.h +43 -22
@@ -127,28 +127,49 @@#else /* MARCH_HAS_Z196_FEATURES */ -#define arch_this_cpu_add (pcp, val, op1, op2, szcast) \ -{ \ - typedef typeof(pcp) pcp_op_T__; \ - pcp_op_T__ val__ = (val); \ - pcp_op_T__ old__, *ptr__; \ - preempt_disable_notrace(); \ - ptr__ = raw_cpu_ptr(&(pcp)); \ - if (__builtin_constant_p(val__) && \ - ((szcast)val__ > -129) && ((szcast)val__ < 128)) { \ - asm volatile( \ - op2 " %[ptr__],%[val__]" \ - : [ptr__] "+Q" (*ptr__) \ - : [val__] "i" ((szcast)val__) \ - : "cc"); \ - } else { \ - asm volatile( \ - op1 " %[old__],%[val__],%[ptr__]" \ - : [old__] "=d" (old__), [ptr__] "+Q" (*ptr__) \ - : [val__] "d" (val__) \ - : "cc"); \ - } \ - preempt_enable_notrace(); \ +#define arch_this_cpu_add (pcp, val, op1, op2, szcast) \ +{ \ + unsigned long lc_pcpr, lc_pcpo; \ + typedef typeof(pcp) pcp_op_T__; \ + pcp_op_T__ val__ = (val); \ + pcp_op_T__ old__, *ptr__; \ + \ + lc_pcpr = offsetof(struct lowcore, percpu_register); \ + lc_pcpo = offsetof(struct lowcore, percpu_offset); \ + ptr__ = PERCPU_PTR(&(pcp)); \ + if (__builtin_constant_p(val__) && \ + ((szcast)val__ > -129) && ((szcast)val__ < 128)) { \ + asm volatile( \ + MVIY_PERCPU("%[disppcpr]", "%[dispaltpcpr]", "%[ptr__]")\ + AG_ALT("%[disppcpo]", "%[dispaltpcpo]", "%[ptr__]") \ + op2 " 0(%[ptr__]),%[val__]\n" \ + MVIY_ALT("%[disppcpr]", "%[dispaltpcpr]", "%%r0") \ + : [ptr__] "+&a" (ptr__), "+m" (*ptr__), \ + "=m" (((struct lowcore *)0)->percpu_register) \ + : [val__] "i" ((szcast)val__), \ + [disppcpr] "i" (lc_pcpr), \ + [disppcpo] "i" (lc_pcpo), \ + [dispaltpcpr] "i" (lc_pcpr + LOWCORE_ALT_ADDRESS), \ + [dispaltpcpo] "i" (lc_pcpo + LOWCORE_ALT_ADDRESS), \ + "m" (((struct lowcore *)0)->percpu_offset) \ + : "cc"); \ + } else { \ + asm volatile( \ + MVIY_PERCPU("%[disppcpr]", "%[dispaltpcpr]", "%[ptr__]")\ + AG_ALT("%[disppcpo]", "%[dispaltpcpo]", "%[ptr__]") \ + op1 " %[old__],%[val__],0(%[ptr__])\n" \ + MVIY_ALT("%[disppcpr]", "%[dispaltpcpr]", "%%r0") \ + : [old__] "=&d" (old__), \ + [ptr__] "+&a" (ptr__), "+m" (*ptr__), \ + "=m" (((struct lowcore *)0)->percpu_register) \ + : [val__] "d" (val__), \ + [disppcpr] "i" (lc_pcpr), \ + [disppcpo] "i" (lc_pcpo), \ + [dispaltpcpr] "i" (lc_pcpr + LOWCORE_ALT_ADDRESS), \ + [dispaltpcpo] "i" (lc_pcpo + LOWCORE_ALT_ADDRESS), \ + "m" (((struct lowcore *)0)->percpu_offset) \ + : "cc"); \ + } \ }#define this_cpu_add_4 (pcp, val) arch_this_cpu_add(pcp, val, "laa", "asi", int)
Signature · 1 line
2.51.0
Heiko Carstens
maintainerPATCH v2 5/9 s390/percpu: Use new percpu code section for arch_this_cpu_add_return()
In reply to Heiko CarstensConvert arch_this_cpu_add_return() to make use of the new percpu code section infrastructure.
With this the text size of the kernel image is reduced by ~4k (defconfig). Also 66 generated preempt_schedule_notrace() function calls within the kernel image (modules not counted) are removed.
--- arch/s390/include/asm/percpu.h | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-)
arch/s390/include/asm/percpu.h +19 -7
@@ -177,17 +177,29 @@#define arch_this_cpu_add_return (pcp, val, op) \ ({ \ + unsigned long lc_pcpr, lc_pcpo; \ typedef typeof(pcp) pcp_op_T__; \ pcp_op_T__ val__ = (val); \ pcp_op_T__ old__, *ptr__; \ - preempt_disable_notrace(); \ - ptr__ = raw_cpu_ptr(&(pcp)); \ - asm volatile( \ - op " %[old__],%[val__],%[ptr__]" \ - : [old__] "=d" (old__), [ptr__] "+Q" (*ptr__) \ - : [val__] "d" (val__) \ + \ + lc_pcpr = offsetof(struct lowcore, percpu_register); \ + lc_pcpo = offsetof(struct lowcore, percpu_offset); \ + ptr__ = PERCPU_PTR(&(pcp)); \ + asm_inline volatile( \ + MVIY_PERCPU("%[disppcpr]", "%[dispaltpcpr]", "%[ptr__]")\ + AG_ALT("%[disppcpo]", "%[dispaltpcpo]", "%[ptr__]") \ + op " %[old__],%[val__],0(%[ptr__])\n" \ + MVIY_ALT("%[disppcpr]", "%[dispaltpcpr]", "%%r0") \ + : [old__] "=&d" (old__), \ + [ptr__] "+&a" (ptr__), "+m" (*ptr__), \ + "=m" (((struct lowcore *)0)->percpu_register) \ + : [val__] "d" (val__), \ + [disppcpr] "i" (lc_pcpr), \ + [disppcpo] "i" (lc_pcpo), \ + [dispaltpcpr] "i" (lc_pcpr + LOWCORE_ALT_ADDRESS), \ + [dispaltpcpo] "i" (lc_pcpo + LOWCORE_ALT_ADDRESS), \ + "m" (((struct lowcore *)0)->percpu_offset) \ : "cc"); \ - preempt_enable_notrace(); \ old__ + val__; \ })
Signature · 1 line
2.51.0
Heiko Carstens
maintainerPATCH v2 6/9 s390/percpu: Use new percpu code section for arch_this_cpu_[and|or]()
In reply to Heiko CarstensConvert arch_this_cpu_[and|or]() to make use of the new percpu code section infrastructure.
There is no user of this_cpu_and() and only one user of this_cpu_or() within the kernel. Therefore this conversion has hardly any effect, and also removes only preempt_schedule_notrace() function call.
--- arch/s390/include/asm/percpu.h | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-)
arch/s390/include/asm/percpu.h +19 -7
@@ -208,17 +208,29 @@#define arch_this_cpu_to_op (pcp, val, op) \ { \ + unsigned long lc_pcpr, lc_pcpo; \ typedef typeof(pcp) pcp_op_T__; \ pcp_op_T__ val__ = (val); \ pcp_op_T__ old__, *ptr__; \ - preempt_disable_notrace(); \ - ptr__ = raw_cpu_ptr(&(pcp)); \ - asm volatile( \ - op " %[old__],%[val__],%[ptr__]" \ - : [old__] "=d" (old__), [ptr__] "+Q" (*ptr__) \ - : [val__] "d" (val__) \ + \ + lc_pcpr = offsetof(struct lowcore, percpu_register); \ + lc_pcpo = offsetof(struct lowcore, percpu_offset); \ + ptr__ = PERCPU_PTR(&(pcp)); \ + asm_inline volatile( \ + MVIY_PERCPU("%[disppcpr]", "%[dispaltpcpr]", "%[ptr__]")\ + AG_ALT("%[disppcpo]", "%[dispaltpcpo]", "%[ptr__]") \ + op " %[old__],%[val__],0(%[ptr__])\n" \ + MVIY_ALT("%[disppcpr]", "%[dispaltpcpr]", "%%r0") \ + : [old__] "=&d" (old__), \ + [ptr__] "+&a" (ptr__), "+m" (*ptr__), \ + "=m" (((struct lowcore *)0)->percpu_register) \ + : [val__] "d" (val__), \ + [disppcpr] "i" (lc_pcpr), \ + [disppcpo] "i" (lc_pcpo), \ + [dispaltpcpr] "i" (lc_pcpr + LOWCORE_ALT_ADDRESS), \ + [dispaltpcpo] "i" (lc_pcpo + LOWCORE_ALT_ADDRESS), \ + "m" (((struct lowcore *)0)->percpu_offset) \ : "cc"); \ - preempt_enable_notrace(); \ }#define this_cpu_and_4 (pcp, val) arch_this_cpu_to_op(pcp, val, "lan")
Signature · 1 line
2.51.0
Heiko Carstens
maintainerPATCH v2 7/9 s390/percpu: Provide arch_this_cpu_read() implementation
In reply to Heiko CarstensProvide an s390 specific implementation of arch_this_cpu_read() instead of the generic variant. The generic variant uses preempt_disable() / preempt_enable() pair and READ_ONCE().
Get rid of the preempt_disable() / preempt_enable() pairs by providing an own variant which makes use of the new percpu code section infrastructure.
With this the text size of the kernel image is reduced by ~1k (defconfig). Also 87 generated preempt_schedule_notrace() function calls within the kernel image (modules not counted) are removed.
--- arch/s390/include/asm/percpu.h | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)
arch/s390/include/asm/percpu.h +31 -0
@@ -240,6 +240,37 @@#endif /* MARCH_HAS_Z196_FEATURES */ +#define arch_this_cpu_read (pcp, op) \ +({ \ + unsigned long lc_pcpr, lc_pcpo; \ + typedef typeof(pcp) pcp_op_T__; \ + pcp_op_T__ val__, *ptr__; \ + \ + lc_pcpr = offsetof(struct lowcore, percpu_register); \ + lc_pcpo = offsetof(struct lowcore, percpu_offset); \ + ptr__ = PERCPU_PTR(&(pcp)); \ + asm_inline volatile( \ + MVIY_PERCPU("%[disppcpr]", "%[dispaltpcpr]", "%[ptr__]")\ + AG_ALT("%[disppcpo]", "%[dispaltpcpo]", "%[ptr__]") \ + op " %[val__],0(%[ptr__])\n" \ + MVIY_ALT("%[disppcpr]", "%[dispaltpcpr]", "%%r0") \ + : [val__] "=&d" (val__), [ptr__] "+&a" (ptr__), \ + "=m" (((struct lowcore *)0)->percpu_register) \ + : [disppcpr] "i" (lc_pcpr), \ + [disppcpo] "i" (lc_pcpo), \ + [dispaltpcpr] "i" (lc_pcpr + LOWCORE_ALT_ADDRESS), \ + [dispaltpcpo] "i" (lc_pcpo + LOWCORE_ALT_ADDRESS), \ + "m" (*ptr__), \ + "m" (((struct lowcore *)0)->percpu_offset) \ + : "cc"); \ + val__; \ +}) + +#define this_cpu_read_1 (pcp) arch_this_cpu_read(pcp, "ic") +#define this_cpu_read_2 (pcp) arch_this_cpu_read(pcp, "lh") +#define this_cpu_read_4 (pcp) arch_this_cpu_read(pcp, "l") +#define this_cpu_read_8 (pcp) arch_this_cpu_read(pcp, "lg") +#define arch_this_cpu_cmpxchg (pcp, oval, nval) \ ({ \ typedef typeof(pcp) pcp_op_T__; \
Signature · 1 line
2.51.0
Heiko Carstens
maintainerPATCH v2 8/9 s390/percpu: Provide arch_this_cpu_write() implementation
In reply to Heiko CarstensProvide an s390 specific implementation of arch_this_cpu_write() instead of the generic variant. The generic variant uses a quite expensive raw_local_irq_save() / raw_local_irq_restore() pair.
Get rid of this by providing an own variant which makes use of the new percpu code section infrastructure.
With this the text size of the kernel image is reduced by ~1k (defconfig).
--- arch/s390/include/asm/percpu.h | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+)
arch/s390/include/asm/percpu.h +32 -0
@@ -271,6 +271,38 @@#define this_cpu_read_4 (pcp) arch_this_cpu_read(pcp, "l")#define this_cpu_read_8 (pcp) arch_this_cpu_read(pcp, "lg") +#define arch_this_cpu_write (pcp, val, op) \ +{ \ + unsigned long lc_pcpr, lc_pcpo; \ + typedef typeof(pcp) pcp_op_T__; \ + pcp_op_T__ val__ = (val); \ + pcp_op_T__ old__, *ptr__; \ + \ + lc_pcpr = offsetof(struct lowcore, percpu_register); \ + lc_pcpo = offsetof(struct lowcore, percpu_offset); \ + ptr__ = PERCPU_PTR(&(pcp)); \ + asm_inline volatile( \ + MVIY_PERCPU("%[disppcpr]", "%[dispaltpcpr]", "%[ptr__]")\ + AG_ALT("%[disppcpo]", "%[dispaltpcpo]", "%[ptr__]") \ + op " %[val__],0(%[ptr__])\n" \ + MVIY_ALT("%[disppcpr]", "%[dispaltpcpr]", "%%r0") \ + : [old__] "=&d" (old__), \ + [ptr__] "+&a" (ptr__), "=m" (*ptr__), \ + "=m" (((struct lowcore *)0)->percpu_register) \ + : [val__] "d" (val__), \ + [disppcpr] "i" (lc_pcpr), \ + [disppcpo] "i" (lc_pcpo), \ + [dispaltpcpr] "i" (lc_pcpr + LOWCORE_ALT_ADDRESS), \ + [dispaltpcpo] "i" (lc_pcpo + LOWCORE_ALT_ADDRESS), \ + "m" (((struct lowcore *)0)->percpu_offset) \ + : "cc"); \ +} + +#define this_cpu_write_1 (pcp, val) arch_this_cpu_write(pcp, val, "stc") +#define this_cpu_write_2 (pcp, val) arch_this_cpu_write(pcp, val, "sth") +#define this_cpu_write_4 (pcp, val) arch_this_cpu_write(pcp, val, "st") +#define this_cpu_write_8 (pcp, val) arch_this_cpu_write(pcp, val, "stg") +#define arch_this_cpu_cmpxchg (pcp, oval, nval) \ ({ \ typedef typeof(pcp) pcp_op_T__; \
Signature · 1 line
2.51.0
Heiko Carstens
maintainerPATCH v2 9/9 s390/percpu: Remove one and two byte this_cpu operation implementation
In reply to Heiko CarstensThere are no one and two byte this_cpu operations within the kernel (defconfig). However even if there would be the s390 implementation, which uses a cmpxchg loop, generates a very large code sequence due to the lack of native one and two byte cmpxchg instructions.
Remove the s390 implementation and use the generic implementation.
--- arch/s390/include/asm/percpu.h | 9 --------- 1 file changed, 9 deletions(-)
arch/s390/include/asm/percpu.h +0 -9
@@ -51,15 +51,6 @@ new__; \ }) -#define this_cpu_add_1 (pcp, val) arch_this_cpu_to_op_simple(pcp, val, +) -#define this_cpu_add_2 (pcp, val) arch_this_cpu_to_op_simple(pcp, val, +) -#define this_cpu_add_return_1 (pcp, val) arch_this_cpu_to_op_simple(pcp, val, +) -#define this_cpu_add_return_2 (pcp, val) arch_this_cpu_to_op_simple(pcp, val, +) -#define this_cpu_and_1 (pcp, val) arch_this_cpu_to_op_simple(pcp, val, &) -#define this_cpu_and_2 (pcp, val) arch_this_cpu_to_op_simple(pcp, val, &) -#define this_cpu_or_1 (pcp, val) arch_this_cpu_to_op_simple(pcp, val, |) -#define this_cpu_or_2 (pcp, val) arch_this_cpu_to_op_simple(pcp, val, |) -/* * Macros to be used for percpu code section based on atomic instructions. *
Signature · 1 line
2.51.0
Quoted 7 lines · Heiko Carstens
v2:
- Add proper
PERCPU_PTRcast to most patches to avoid tons of sparse warnings- Add missing
__packedattribute to insn structure [Sashiko [2]]
Quoted 7 lines
- Fix inverted if condition [Sashiko [2]]
- Add missing
user_mode()check [Sashiko [2]]- Move
percpu_entry()call in front ofirqentry_enter()call in all entry paths to avoid that potentialthis_cpu()operations overwrite the not-yet saved percpu code section indicator [Sashiko [2]]
Would it make sense to add arch hooks to irqentry_{enter,exit}() ?
Heiko Carstens
maintainerQuoted 10 lines · Peter Zijlstra
Quoted 9 lines · Heiko Carstens
v2:
- Add proper
PERCPU_PTRcast to most patches to avoid tons of sparse warnings- Add missing
__packedattribute to insn structure [Sashiko [2]]- Fix inverted if condition [Sashiko [2]]
Quoted 7 lines
Quoted 5 lines
- Add missing
user_mode()check [Sashiko [2]]- Move
percpu_entry()call in front ofirqentry_enter()call in all entry paths to avoid that potentialthis_cpu()operations overwrite the not-yet saved percpu code section indicator [Sashiko [2]]Would it make sense to add arch hooks to irqentry_{enter,exit}() ?
I guess it would make sense to have some architecture hook which allows to run code on all entry/exit paths instead of duplicating the code n times.
But apparently my code seems to have more bugs (e.g. I didn't consider kprobes which would make the instruction comparison not work). So this has to wait until I'm back after vacation.
Quoted 19 lines · Heiko Carstens
Quoted 10 lines · Peter Zijlstra
Quoted 9 lines · Heiko Carstens
v2:
- Add proper
PERCPU_PTRcast to most patches to avoid tons of sparse warnings- Add missing
__packedattribute to insn structure [Sashiko [2]]- Fix inverted if condition [Sashiko [2]]
Quoted 7 lines
Quoted 5 lines
- Add missing
user_mode()check [Sashiko [2]]- Move
percpu_entry()call in front ofirqentry_enter()call in all entry paths to avoid that potentialthis_cpu()operations overwrite the not-yet saved percpu code section indicator [Sashiko [2]]Would it make sense to add arch hooks to irqentry_{enter,exit}() ?
Quoted 7 lines
I guess it would make sense to have some architecture hook which allows to run code on all entry/exit paths instead of duplicating the code n times.
But apparently my code seems to have more bugs (e.g. I didn't consider kprobes which would make the instruction comparison not work). So this has to wait until I'm back after vacation.
My vote is to reject kprobes in these regions :-) Anyway, enjoy the time off!