Skip to contentSkip to conversation

arm64: dts: ti: k3-am62a7-sk: Add bootph-all tag to vqmmc

PATCH Applied Judith Mendez 2 participants 2 messages Mar 24 – May 5

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm64: dts: ti: k3-am62a7-sk: Add bootph-all tag to vqmmc

Add bootph-all property to vqmmc voltage regulator node and its corresponding pinmux node to make it available during all boot phases. This allows to run tuning early in SPL stages of boot.

Fixes 8f023012eb4a ("arm64: dts: ti: k3-am62a: Enable UHS mode support for SD cards")
---
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 2 ++
 1 file changed, 2 insertions(+)
arch/arm64/boot/dts/ti/k3-am62a7-sk.dts +2 -0
index b1a6f10adf26..a085613cf123 100644
@@ -154,6 +154,7 @@ vddshv_sdio: regulator-5 {
 		gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
 		states = <1800000 0x0>,
 			 <3300000 0x1>;
+		bootph-all;
 	};
 
 	leds {
@@ -400,6 +401,7 @@ vddshv_sdio_pins_default: vddshv-sdio-default-pins {
 		pinctrl-single,pins = <
 			AM62AX_IOPAD(0x07c, PIN_OUTPUT, 7) /* (N22) GPMC0_CLK.GPIO0_31 */
 		>;
+		bootph-all;
 	};
 
 	main_ecap0_pins_default: main-ecap0-default-pins {
Signature · 1 line
2.53.0
maintainer Applied
#1 lore raw

Hi Judith Mendez,

Quoted 3 lines · Judith Mendez

Add bootph-all property to vqmmc voltage regulator node and its corresponding pinmux node to make it available during all boot phases. This allows to run tuning early in SPL stages of boot.

I have applied the following to branch ti-k3-dts-next on [1]. Thank you!

[1/1] arm64: dts: ti: k3-am62a7-sk: Add bootph-all tag to vqmmc

      commit: d8fe8442366ffd8306575028bda92389d0dfb674

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git

Signature · 4 lines
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D
https://ti.com/opensource