firmware/tegra: add COMPILE_TEST
Subsystems (2)
PATCH v3 1/1 firmware/tegra: add COMPILE_TEST
For this driver specifically, there's no arch specific stuff needed.
Build the tegra clk stuff as tegra_bpmp_init_clocks is defined there. CLK_TEGRA_BPMP also depends on TEGRA_BPMP.
Signed-off-by Rosen Penev <[email protected]>
---
v3: add a Kconfig symbol instead.
v2: also build the tegra clk stuff.
drivers/clk/Kconfig | 7 +++++++ drivers/clk/Makefile | 2 +- drivers/firmware/tegra/Kconfig | 4 ++-- 3 files changed, 10 insertions(+), 3 deletions(-)
drivers/clk/Kconfig +7 -0
@@ -335,6 +335,13 @@ config CLK_LS1028A_PLLDIG features of the PLL are currently supported by the driver. By default, configured bypass mode with this PLL. +config CLK_TEGRA + bool "Clock driver for Nvidia Tegra platforms" + depends on ARCH_TEGRA || COMPILE_TEST + help + This adds the clock driver support for Nvidia Tegra platforms + using common clock framework. + config COMMON_CLK_XGENE bool "Clock driver for APM XGene SoC" default ARCH_XGENE
drivers/clk/Makefile +1 -1
@@ -154,7 +154,7 @@ obj-$(CONFIG_ARCH_STM32) += stm32/ obj-y += starfive/ obj-$(CONFIG_ARCH_SUNXI) += sunxi/ obj-y += sunxi-ng/ -obj-$(CONFIG_ARCH_TEGRA) += tegra/ +obj-$(CONFIG_CLK_TEGRA) += tegra/ obj-y += tenstorrent/ obj-$(CONFIG_ARCH_THEAD) += thead/ obj-y += ti/
drivers/firmware/tegra/Kconfig +2 -2
@@ -3,7 +3,7 @@ menu "Tegra firmware driver" config TEGRA_IVC bool "Tegra IVC protocol" if COMPILE_TEST - depends on ARCH_TEGRA + depends on ARCH_TEGRA || COMPILE_TEST help IVC (Inter-VM Communication) protocol is part of the IPC (Inter Processor Communication) framework on Tegra. It maintains the
@@ -13,7 +13,7 @@ config TEGRA_IVC config TEGRA_BPMP bool "Tegra BPMP driver" - depends on ARCH_TEGRA && TEGRA_HSP_MBOX + depends on (ARCH_TEGRA && TEGRA_HSP_MBOX) || COMPILE_TEST depends on !CPU_BIG_ENDIAN select TEGRA_IVC help
--
2.53.0