Skip to contentSkip to conversation

perf: marvell: Add CN20K DDR PMU support

PATCH Superseded Geetha sowjanya 2 participants 6 messages Apr 1 – Apr 2

Subsystems (2)

v3 of 8 Superseded Latest is v8 →

lore
Share & tools
lore
#0 lore raw

v3 cover perf: marvell: Add CN20K DDR PMU support

This series adds support for the Marvell CN20K DRAM Subsystem (DSS) performance monitor in the existing marvell_cn10k_ddr_pmu driver, and documents the device tree binding for the new compatible string.

The CN20K PMU provides eight programmable counters and two fixed counters (DDR reads and writes). Patch 1 adds the devicetree schema for "marvell,cn20k-ddr-pmu". Patch 2 wires OF and ACPI (MRVL000B) match entries, adds CN20K register offsets and event maps, and refactors platform data to use silicon variant flags.

Changes in v2:
- Fixed YAML syntax error triggered by a tab character in the examples section, which caused dt_binding_check to fail.

Changes in v1:
- Added a description field to the binding.
- Simplified the compatible property using 'const' instead of 'items/enum'.
- Updated the example node name to include a unit-address matching the reg base.

Geetha sowjanya (2):
dt-bindings: perf: marvell: Document CN20K DDR PMU
perf: marvell: Add CN20K DDR PMU support

 .../bindings/perf/marvell-cn20k-ddr.yaml      |  37 ++++
 drivers/perf/marvell_cn10k_ddr_pmu.c          | 186 ++++++++++++++++--
 2 files changed, 207 insertions(+), 16 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/perf/marvell-cn20k-ddr.yaml
Signature · 1 line
2.25.1
#1 lore raw

PATCH v3 1/2 dt-bindings: perf: marvell: Document CN20K DDR PMU

Add a devicetree binding for the Marvell CN20K DDR performance monitor block, including the marvell,cn20k-ddr-pmu compatible string and the required MMIO reg region.

---
 .../bindings/perf/marvell-cn20k-ddr.yaml      | 39 +++++++++++++++++++
 1 file changed, 39 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/perf/marvell-cn20k-ddr.yaml
Documentation/devicetree/bindings/perf/marvell-cn20k-ddr.yaml new file +39 -0
new file mode 100644
index 000000000000..fa757017d66e
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/marvell-cn20k-ddr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell CN20K DDR performance monitor
+
+description:
+  Performance Monitoring Unit (PMU) for the DDR controller
+  in Marvell CN20K SoCs.
+
+maintainers:
+  - Geetha sowjanya <[email protected]>
+
+properties:
+  compatible:
+    const: marvell,cn20k-ddr-pmu
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ddr-pmu@c200000000 {
+            compatible = "marvell,cn20k-ddr-pmu";
+            reg = <0xc200 0x00000000 0x0 0x100000>;
+        };
+    };
Signature · 1 line
2.25.1
#2 lore raw

Re: [PATCH v3 1/2] dt-bindings: perf: marvell: Document CN20K DDR PMU

Quoted 3 lines · Geetha sowjanya

Add a devicetree binding for the Marvell CN20K DDR performance monitor block, including the marvell,cn20k-ddr-pmu compatible string and the required MMIO reg region.

You just repeated the diff. No need, we can read the diff, but what we cannot read is the hardware you are here describing.

Quoted 4 lines
---
 .../bindings/perf/marvell-cn20k-ddr.yaml      | 39 +++++++++++++++++++

So you did not test v1. You did not test v2.

Did you finally test this one before sending?

Quoted 17 lines
 1 file changed, 39 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/perf/marvell-cn20k-ddr.yaml
Documentation/devicetree/bindings/perf/marvell-cn20k-ddr.yaml new file +8 -0
new file mode 100644
index 000000000000..fa757017d66e
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/marvell-cn20k-ddr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell CN20K DDR performance monitor
+

Documentation/devicetree/bindings/perf/marvell-cn20k-ddr.yaml line 18

Quoted 10 lines
Documentation/devicetree/bindings/perf/marvell-cn20k-ddr.yaml new file +10 -0
+description:
+  Performance Monitoring Unit (PMU) for the DDR controller
+  in Marvell CN20K SoCs.
+
+maintainers:
+  - Geetha sowjanya <[email protected]>
+
+properties:
+  compatible:
+    const: marvell,cn20k-ddr-pmu

There is no such thing as marvell,cn20k in upstream. What's that?

Best regards,
Krzysztof

#3 lore raw

RE: [EXTERNAL] Re: [PATCH v3 1/2] dt-bindings: perf: marvell: Document CN20K DDR PMU

Quoted 12 lines

-----Original Message-----
From: Krzysztof Kozlowski <[email protected]>
Sent: Thursday, April 2, 2026 12:47 PM
To: Geethasowjanya Akula <[email protected]>
Cc: [email protected]; [email protected]; linux-arm- [email protected]; [email protected]; [email protected]; [email protected]; [email protected]
Subject: [EXTERNAL] Re: [PATCH v3 1/2] dt-bindings: perf: marvell: Document CN20K DDR PMU

Quoted 8 lines
Quoted 3 lines · Geetha sowjanya

Add a devicetree binding for the Marvell CN20K DDR performance monitor block, including the marvell,cn20k-ddr-pmu compatible string and the required MMIO reg region.

You just repeated the diff. No need, we can read the diff, but what we cannot read is the hardware you are here describing.

Thank you for the review.
You are correct — the commit message and cover letter did not had sufficient hardware context beyond what is already present in the diff.
CN20K is the successor to CN10K, and the DDR PMU hardware block is functionally identical to the CN10K DDR PMU, with only minor register offset differences. This series extends the existing CN10K ddr driver to support CN20K by accounting for those offset changes.
I will update the commit description to clearly document the DDR PMU hardware, its relationship to the CN10K implementation.

Quoted 8 lines
Quoted 4 lines
---
 .../bindings/perf/marvell-cn20k-ddr.yaml      | 39 +++++++++++++++++++

So you did not test v1. You did not test v2.

Did you finally test this one before sending?

Yes, this version has been validated by running make dt_binding_check and boot-tested on a CN20K simulator.

Quoted 33 lines
Quoted 13 lines
 1 file changed, 39 insertions(+)
 create mode 100644

Documentation/devicetree/bindings/perf/marvell-cn20k-ddr.yaml

diff --git a/Documentation/devicetree/bindings/perf/marvell-cn20k-ddr.yaml b/Documentation/devicetree/bindings/perf/marvell-cn20k-ddr.yaml new file mode 100644
index 000000000000..fa757017d66e

Documentation/devicetree/bindings/perf/marvell-cn20k-ddr.yaml line 5

Quoted 5 lines
Documentation/devicetree/bindings/perf/marvell-cn20k-ddr.yaml new file +5 -0
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
+---
+$id:
+https://urldefense.proofpoint.com/v2/url?u=http-3A__devicetree.org_sc
+hemas_perf_marvell-2Dcn20k-2Dddr.yaml-

23&d=DwIBaQ&c=nKjWec2b6R0mOyPaz

Quoted 1 line

+7xtfQ&r=UiEt_nUeYFctu7JVLXVlXDhTmq_EAfooaZEYInfGuEQ&m=DMPRMbcsa CQDqOv

Quoted 1 line

+Hx1f-Oqls-

X7ZqhI8W9wFel75rh79c2Z0SJ936gMxT4qaMiA5&s=fLAYBOTd64cW4cp0e

Documentation/devicetree/bindings/perf/marvell-cn20k-ddr.yaml

Quoted 4 lines
Documentation/devicetree/bindings/perf/marvell-cn20k-ddr.yaml new file +4 -0
+b-wxZI6vgY49R2E8M7EUoCk8y4&e=
+$schema:
+https://urldefense.proofpoint.com/v2/url?u=http-3A__devicetree.org_me
+ta-2Dschemas_core.yaml-

23&d=DwIBaQ&c=nKjWec2b6R0mOyPaz7xtfQ&r=UiEt_nU

Quoted 1 line

+eYFctu7JVLXVlXDhTmq_EAfooaZEYInfGuEQ&m=DMPRMbcsaCQDqOvHx1f-

Oqls-X7Zqh

Quoted 1 line

+I8W9wFel75rh79c2Z0SJ936gMxT4qaMiA5&s=VeGgq23L-

AbFpFxV4e15wgUvn0yEbUDP

Quoted 17 lines
Quoted 4 lines
Documentation/devicetree/bindings/perf/marvell-cn20k-ddr.yaml new file +4 -0
+xDzNa-1cJ94&e=
+
+title: Marvell CN20K DDR performance monitor
+

Documentation/devicetree/bindings/perf/marvell-cn20k-ddr.yaml line 18

Quoted 10 lines
Documentation/devicetree/bindings/perf/marvell-cn20k-ddr.yaml new file +10 -0
+description:
+  Performance Monitoring Unit (PMU) for the DDR controller
+  in Marvell CN20K SoCs.
+
+maintainers:
+  - Geetha sowjanya <[email protected]>
+
+properties:
+  compatible:
+    const: marvell,cn20k-ddr-pmu

There is no such thing as marvell,cn20k in upstream. What's that?

CN20K is the successor to CN10K . Will also re‑check CN20K naming against existing upstream Marvell SoC compatibles.

Quoted 2 lines

Best regards,
Krzysztof

Thanks,
Geetha.

#4 lore raw

Re: [PATCH v3 1/2] dt-bindings: perf: marvell: Document CN20K DDR PMU

In reply to Geetha sowjanya
Quoted 9 lines · Geetha sowjanya

Add a devicetree binding for the Marvell CN20K DDR performance monitor block, including the marvell,cn20k-ddr-pmu compatible string and the required MMIO reg region.

---
 .../bindings/perf/marvell-cn20k-ddr.yaml      | 39 +++++++++++++++++++
 1 file changed, 39 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/perf/marvell-cn20k-ddr.yaml

I forgot:

Filename must match compatible.

Best regards,
Krzysztof

#5 lore raw

PATCH v3 2/2 perf: marvell: Add CN20K DDR PMU support

In reply to Geetha sowjanya

The CN20K DRAM Subsystem exposes eight programmable performance counters and two fixed counters for DDR read and write traffic. Software selects events for the programmable counters from traffic at the DDR PHY interface, the CHI interconnect, or inside the DDR controller.

Add CN20K register offsets, event maps, and sysfs attributes; match the device via OF (marvell,cn20k-ddr-pmu) and ACPI (MRVL000B). Represent the SoC variant in platform data with bit flags so CN20K can reuse the Odyssey PMU code path where appropriate.

---
 drivers/perf/marvell_cn10k_ddr_pmu.c | 187 ++++++++++++++++++++++++---
 1 file changed, 171 insertions(+), 16 deletions(-)
drivers/perf/marvell_cn10k_ddr_pmu.c +171 -16
index 72ac17efd846..7e2e1823b009 100644
@@ -13,31 +13,43 @@
 #include <linux/hrtimer.h>
 #include <linux/acpi.h>
 #include <linux/platform_device.h>
+#include <linux/bits.h>
+
+/* SoC variant flags for struct ddr_pmu_platform_data (mutually exclusive in pdata) */
+#define IS_CN10K	BIT(0)
+#define IS_ODY		BIT(1)
+#define IS_CN20K	BIT(2)
 
 /* Performance Counters Operating Mode Control Registers */
 #define CN10K_DDRC_PERF_CNT_OP_MODE_CTRL	0x8020
 #define ODY_DDRC_PERF_CNT_OP_MODE_CTRL		0x20020
+#define CN20K_DDRC_PERF_CNT_OP_MODE_CTRL	0x20000
 #define OP_MODE_CTRL_VAL_MANUAL	0x1
 
 /* Performance Counters Start Operation Control Registers */
 #define CN10K_DDRC_PERF_CNT_START_OP_CTRL	0x8028
 #define ODY_DDRC_PERF_CNT_START_OP_CTRL		0x200A0
+#define CN20K_DDRC_PERF_CNT_START_OP_CTRL	0x20080
 #define START_OP_CTRL_VAL_START		0x1ULL
 #define START_OP_CTRL_VAL_ACTIVE	0x2
 
 /* Performance Counters End Operation Control Registers */
 #define CN10K_DDRC_PERF_CNT_END_OP_CTRL	0x8030
 #define ODY_DDRC_PERF_CNT_END_OP_CTRL	0x200E0
+#define CN20K_DDRC_PERF_CNT_END_OP_CTRL	0x200C0
 #define END_OP_CTRL_VAL_END		0x1ULL
 
 /* Performance Counters End Status Registers */
 #define CN10K_DDRC_PERF_CNT_END_STATUS		0x8038
 #define ODY_DDRC_PERF_CNT_END_STATUS		0x20120
+#define CN20K_DDRC_PERF_CNT_END_STATUS		0x20100
 #define END_STATUS_VAL_END_TIMER_MODE_END	0x1
 
 /* Performance Counters Configuration Registers */
 #define CN10K_DDRC_PERF_CFG_BASE		0x8040
 #define ODY_DDRC_PERF_CFG_BASE			0x20160
+#define CN20K_DDRC_PERF_CFG_BASE		0x20140
+#define CN20K_DDRC_PERF_CFG1_BASE		0x20180
 
 /* 8 Generic event counter + 2 fixed event counters */
 #define DDRC_PERF_NUM_GEN_COUNTERS	8
@@ -61,6 +73,23 @@
  * DO NOT change these event-id numbers, they are used to
  * program event bitmap in h/w.
  */
+
+/* CN20K specific events */
+#define EVENT_PERF_OP_IS_RD16			61
+#define EVENT_PERF_OP_IS_RD32			60
+#define EVENT_PERF_OP_IS_WR16			59
+#define EVENT_PERF_OP_IS_WR32			58
+#define EVENT_OP_IS_ENTER_DSM			44
+#define EVENT_OP_IS_RFM				43
+
+#define EVENT_CN20K_OP_IS_TCR_MRR			50
+#define EVENT_CN20K_OP_IS_DQSOSC_MRR			49
+#define EVENT_CN20K_OP_IS_DQSOSC_MPC			48
+#define EVENT_CN20K_VISIBLE_WIN_LIMIT_REACHED_WR	47
+#define EVENT_CN20K_VISIBLE_WIN_LIMIT_REACHED_RD	46
+#define EVENT_CN20K_OP_IS_ZQLATCH			21
+#define EVENT_CN20K_OP_IS_ZQSTART			22
+
 #define EVENT_DFI_CMD_IS_RETRY			61
 #define EVENT_RD_UC_ECC_ERROR			60
 #define EVENT_RD_CRC_ERROR			59
@@ -87,6 +116,9 @@
 #define EVENT_OP_IS_SPEC_REF			41
 #define EVENT_OP_IS_CRIT_REF			40
 #define EVENT_OP_IS_REFRESH			39
+#define EVENT_OP_IS_CAS_WCK_SUS			38
+#define EVENT_OP_IS_CAS_WS_OFF			37
+#define EVENT_OP_IS_CAS_WS			36
 #define EVENT_OP_IS_ENTER_MPSM			35
 #define EVENT_OP_IS_ENTER_POWERDOWN		31
 #define EVENT_OP_IS_ENTER_SELFREF		27
@@ -183,8 +215,8 @@ struct ddr_pmu_platform_data {
 	u64 cnt_freerun_clr;
 	u64 cnt_value_wr_op;
 	u64 cnt_value_rd_op;
-	bool is_cn10k;
-	bool is_ody;
+	u64 cfg1_base;
+	unsigned int silicon_flags; /* IS_CN10K, IS_ODY, or IS_CN20K */
 };
 
 static ssize_t cn10k_ddr_pmu_event_show(struct device *dev,
@@ -336,6 +368,80 @@ static struct attribute *odyssey_ddr_perf_events_attrs[] = {
 	NULL
 };
 
+static struct attribute *cn20k_ddr_perf_events_attrs[] = {
+	/* Programmable */
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_hif_rd_or_wr_access, EVENT_HIF_RD_OR_WR),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_hif_wr_access, EVENT_HIF_WR),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_hif_rd_access, EVENT_HIF_RD),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_hif_rmw_access, EVENT_HIF_RMW),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_hif_pri_rdaccess, EVENT_HIF_HI_PRI_RD),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_rd_bypass_access, EVENT_READ_BYPASS),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_act_bypass_access, EVENT_ACT_BYPASS),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_dfi_wr_data_access,
+				 EVENT_DFI_WR_DATA_CYCLES),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_dfi_rd_data_access,
+				 EVENT_DFI_RD_DATA_CYCLES),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_hpri_sched_rd_crit_access,
+				 EVENT_HPR_XACT_WHEN_CRITICAL),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_lpri_sched_rd_crit_access,
+				 EVENT_LPR_XACT_WHEN_CRITICAL),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_wr_trxn_crit_access,
+				 EVENT_WR_XACT_WHEN_CRITICAL),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_cam_active_access, EVENT_OP_IS_ACTIVATE),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_cam_rd_or_wr_access,
+				 EVENT_OP_IS_RD_OR_WR),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_cam_rd_active_access,
+				 EVENT_OP_IS_RD_ACTIVATE),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_cam_read, EVENT_OP_IS_RD),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_cam_write, EVENT_OP_IS_WR),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_cam_mwr, EVENT_OP_IS_MWR),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_precharge, EVENT_OP_IS_PRECHARGE),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_precharge_for_rdwr,
+				 EVENT_PRECHARGE_FOR_RDWR),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_precharge_for_other,
+				 EVENT_PRECHARGE_FOR_OTHER),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_rdwr_transitions, EVENT_RDWR_TRANSITIONS),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_write_combine, EVENT_WRITE_COMBINE),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_war_hazard, EVENT_WAR_HAZARD),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_raw_hazard, EVENT_RAW_HAZARD),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_waw_hazard, EVENT_WAW_HAZARD),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_enter_selfref, EVENT_OP_IS_ENTER_SELFREF),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_enter_powerdown,
+				 EVENT_OP_IS_ENTER_POWERDOWN),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_cas_ws, EVENT_OP_IS_CAS_WS),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_cas_ws_off, EVENT_OP_IS_CAS_WS_OFF),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_cas_wck_sus, EVENT_OP_IS_CAS_WCK_SUS),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_refresh, EVENT_OP_IS_REFRESH),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_crit_ref, EVENT_OP_IS_CRIT_REF),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_spec_ref, EVENT_OP_IS_SPEC_REF),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_load_mode, EVENT_OP_IS_LOAD_MODE),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_rfm, EVENT_OP_IS_RFM),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_enter_dsm, EVENT_OP_IS_ENTER_DSM),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_dfi_cycles, EVENT_DFI_CYCLES),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_win_limit_reached_rd,
+				 EVENT_CN20K_VISIBLE_WIN_LIMIT_REACHED_RD),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_win_limit_reached_wr,
+				 EVENT_CN20K_VISIBLE_WIN_LIMIT_REACHED_WR),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_dqsosc_mpc, EVENT_CN20K_OP_IS_DQSOSC_MPC),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_dqsosc_mrr, EVENT_CN20K_OP_IS_DQSOSC_MRR),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_tcr_mrr, EVENT_CN20K_OP_IS_TCR_MRR),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_zqstart, EVENT_CN20K_OP_IS_ZQSTART),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_zqlatch, EVENT_CN20K_OP_IS_ZQLATCH),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_read16, EVENT_PERF_OP_IS_RD16),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_read32, EVENT_PERF_OP_IS_RD32),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_write16, EVENT_PERF_OP_IS_WR16),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_write32, EVENT_PERF_OP_IS_WR32),
+	/* Free run event counters */
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_ddr_reads, EVENT_DDR_READS),
+	CN10K_DDR_PMU_EVENT_ATTR(ddr_ddr_writes, EVENT_DDR_WRITES),
+	NULL
+};
+
+static struct attribute_group cn20k_ddr_perf_events_attr_group = {
+	.name = "events",
+	.attrs = cn20k_ddr_perf_events_attrs,
+};
+
 static struct attribute_group odyssey_ddr_perf_events_attr_group = {
 	.name = "events",
 	.attrs = odyssey_ddr_perf_events_attrs,
@@ -393,6 +499,13 @@ static const struct attribute_group *odyssey_attr_groups[] = {
 	NULL
 };
 
+static const struct attribute_group *cn20k_attr_groups[] = {
+	&cn20k_ddr_perf_events_attr_group,
+	&cn10k_ddr_perf_format_attr_group,
+	&cn10k_ddr_perf_cpumask_attr_group,
+	NULL
+};
+
 /* Default poll timeout is 100 sec, which is very sufficient for
  * 48 bit counter incremented max at 5.6 GT/s, which may take many
  * hours to overflow.
@@ -412,7 +525,7 @@ static int ddr_perf_get_event_bitmap(int eventid, u64 *event_bitmap,
 
 	switch (eventid) {
 	case EVENT_DFI_PARITY_POISON ...EVENT_DFI_CMD_IS_RETRY:
-		if (!ddr_pmu->p_data->is_ody) {
+		if (!(ddr_pmu->p_data->silicon_flags & IS_ODY)) {
 			err = -EINVAL;
 			break;
 		}
@@ -524,9 +637,9 @@ static void cn10k_ddr_perf_counter_enable(struct cn10k_ddr_pmu *pmu,
 					  int counter, bool enable)
 {
 	const struct ddr_pmu_platform_data *p_data = pmu->p_data;
+	unsigned int silicon_flags = pmu->p_data->silicon_flags;
 	u64 ctrl_reg = pmu->p_data->cnt_op_mode_ctrl;
 	const struct ddr_pmu_ops *ops = pmu->ops;
-	bool is_ody = pmu->p_data->is_ody;
 	u32 reg;
 	u64 val;
 
@@ -546,7 +659,7 @@ static void cn10k_ddr_perf_counter_enable(struct cn10k_ddr_pmu *pmu,
 
 		writeq_relaxed(val, pmu->base + reg);
 
-		if (is_ody) {
+		if (silicon_flags & IS_ODY) {
 			if (enable) {
 				/*
 				 * Setup the PMU counter to work in
@@ -621,6 +734,7 @@ static int cn10k_ddr_perf_event_add(struct perf_event *event, int flags)
 {
 	struct cn10k_ddr_pmu *pmu = to_cn10k_ddr_pmu(event->pmu);
 	const struct ddr_pmu_platform_data *p_data = pmu->p_data;
+	unsigned int silicon_flags = pmu->p_data->silicon_flags;
 	const struct ddr_pmu_ops *ops = pmu->ops;
 	struct hw_perf_event *hwc = &event->hw;
 	u8 config = event->attr.config;
@@ -642,10 +756,17 @@ static int cn10k_ddr_perf_event_add(struct perf_event *event, int flags)
 	if (counter < DDRC_PERF_NUM_GEN_COUNTERS) {
 		/* Generic counters, configure event id */
 		reg_offset = DDRC_PERF_CFG(p_data->cfg_base, counter);
-		ret = ddr_perf_get_event_bitmap(config, &val, pmu);
-		if (ret)
-			return ret;
 
+		if (silicon_flags & IS_CN20K) {
+			val =  (1ULL << (config - 1));
+			if (config == EVENT_CN20K_OP_IS_ZQSTART ||
+			    config == EVENT_CN20K_OP_IS_ZQLATCH)
+				reg_offset = DDRC_PERF_CFG(p_data->cfg1_base, counter);
+		} else {
+			ret = ddr_perf_get_event_bitmap(config, &val, pmu);
+			if (ret)
+				return ret;
+		}
 		writeq_relaxed(val, pmu->base + reg_offset);
 	} else {
 		/* fixed event counter, clear counter value */
@@ -952,7 +1073,25 @@ static const struct ddr_pmu_platform_data cn10k_ddr_pmu_pdata = {
 	.cnt_freerun_clr = 0,
 	.cnt_value_wr_op = CN10K_DDRC_PERF_CNT_VALUE_WR_OP,
 	.cnt_value_rd_op = CN10K_DDRC_PERF_CNT_VALUE_RD_OP,
-	.is_cn10k = TRUE,
+	.silicon_flags = IS_CN10K,
+};
+
+static const struct ddr_pmu_platform_data cn20k_ddr_pmu_pdata = {
+	.counter_overflow_val = 0,
+	.counter_max_val = GENMASK_ULL(63, 0),
+	.cnt_base = ODY_DDRC_PERF_CNT_VALUE_BASE,
+	.cfg_base = CN20K_DDRC_PERF_CFG_BASE,
+	.cfg1_base = CN20K_DDRC_PERF_CFG1_BASE,
+	.cnt_op_mode_ctrl = CN20K_DDRC_PERF_CNT_OP_MODE_CTRL,
+	.cnt_start_op_ctrl = CN20K_DDRC_PERF_CNT_START_OP_CTRL,
+	.cnt_end_op_ctrl = CN20K_DDRC_PERF_CNT_END_OP_CTRL,
+	.cnt_end_status = CN20K_DDRC_PERF_CNT_END_STATUS,
+	.cnt_freerun_en = 0,
+	.cnt_freerun_ctrl = ODY_DDRC_PERF_CNT_FREERUN_CTRL,
+	.cnt_freerun_clr = ODY_DDRC_PERF_CNT_FREERUN_CLR,
+	.cnt_value_wr_op = ODY_DDRC_PERF_CNT_VALUE_WR_OP,
+	.cnt_value_rd_op = ODY_DDRC_PERF_CNT_VALUE_RD_OP,
+	.silicon_flags = IS_CN20K,
 };
 #endif
 
@@ -979,7 +1118,7 @@ static const struct ddr_pmu_platform_data odyssey_ddr_pmu_pdata = {
 	.cnt_freerun_clr = ODY_DDRC_PERF_CNT_FREERUN_CLR,
 	.cnt_value_wr_op = ODY_DDRC_PERF_CNT_VALUE_WR_OP,
 	.cnt_value_rd_op = ODY_DDRC_PERF_CNT_VALUE_RD_OP,
-	.is_ody = TRUE,
+	.silicon_flags = IS_ODY,
 };
 #endif
 
@@ -989,8 +1128,7 @@ static int cn10k_ddr_perf_probe(struct platform_device *pdev)
 	struct cn10k_ddr_pmu *ddr_pmu;
 	struct resource *res;
 	void __iomem *base;
-	bool is_cn10k;
-	bool is_ody;
+	unsigned int silicon_flags;
 	char *name;
 	int ret;
 
@@ -1014,10 +1152,9 @@ static int cn10k_ddr_perf_probe(struct platform_device *pdev)
 	ddr_pmu->base = base;
 
 	ddr_pmu->p_data = dev_data;
-	is_cn10k = ddr_pmu->p_data->is_cn10k;
-	is_ody = ddr_pmu->p_data->is_ody;
+	silicon_flags = ddr_pmu->p_data->silicon_flags;
 
-	if (is_cn10k) {
+	if (silicon_flags & IS_CN10K) {
 		ddr_pmu->ops = &ddr_pmu_ops;
 		/* Setup the PMU counter to work in manual mode */
 		writeq_relaxed(OP_MODE_CTRL_VAL_MANUAL, ddr_pmu->base +
@@ -1039,7 +1176,7 @@ static int cn10k_ddr_perf_probe(struct platform_device *pdev)
 		};
 	}
 
-	if (is_ody) {
+	if (silicon_flags & IS_ODY) {
 		ddr_pmu->ops = &ddr_pmu_ody_ops;
 
 		ddr_pmu->pmu = (struct pmu) {
@@ -1056,6 +1193,22 @@ static int cn10k_ddr_perf_probe(struct platform_device *pdev)
 		};
 	}
 
+	if (silicon_flags & IS_CN20K) {
+		ddr_pmu->ops = &ddr_pmu_ody_ops;
+
+		ddr_pmu->pmu = (struct pmu) {
+			.module       = THIS_MODULE,
+			.capabilities = PERF_PMU_CAP_NO_EXCLUDE,
+			.task_ctx_nr = perf_invalid_context,
+			.attr_groups = cn20k_attr_groups,
+			.event_init  = cn10k_ddr_perf_event_init,
+			.add         = cn10k_ddr_perf_event_add,
+			.del         = cn10k_ddr_perf_event_del,
+			.start       = cn10k_ddr_perf_event_start,
+			.stop        = cn10k_ddr_perf_event_stop,
+			.read        = cn10k_ddr_perf_event_update,
+		};
+	}
 	/* Choose this cpu to collect perf data */
 	ddr_pmu->cpu = raw_smp_processor_id();
 
@@ -1098,6 +1251,7 @@ static void cn10k_ddr_perf_remove(struct platform_device *pdev)
 #ifdef CONFIG_OF
 static const struct of_device_id cn10k_ddr_pmu_of_match[] = {
 	{ .compatible = "marvell,cn10k-ddr-pmu", .data = &cn10k_ddr_pmu_pdata },
+	{ .compatible = "marvell,cn20k-ddr-pmu", .data = &cn20k_ddr_pmu_pdata },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, cn10k_ddr_pmu_of_match);
@@ -1107,6 +1261,7 @@ MODULE_DEVICE_TABLE(of, cn10k_ddr_pmu_of_match);
 static const struct acpi_device_id cn10k_ddr_pmu_acpi_match[] = {
 	{"MRVL000A", (kernel_ulong_t)&cn10k_ddr_pmu_pdata },
 	{"MRVL000C", (kernel_ulong_t)&odyssey_ddr_pmu_pdata},
+	{"MRVL000B", (kernel_ulong_t)&cn20k_ddr_pmu_pdata},
 	{},
 };
 MODULE_DEVICE_TABLE(acpi, cn10k_ddr_pmu_acpi_match);
Signature · 1 line
2.25.1