Skip to contentSkip to conversation

tests/kms_pipe_crc_basic: add mst suspend-resume test

PATCH In review Kunal Joshi 3 participants 15 messages Apr 1

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover tests/kms_pipe_crc_basic: add mst suspend-resume test

This patch series introduces MST suspend-resume test to kms_pipe_crc_basic. The MST test validates there is no corruption/blank out across suspend/resume cycles for all possible subsets.

Kunal Joshi (6):
tests/intel/kms_mst_helper: Add kernel-doc for existing function tests/intel/kms_mst_helper: Add helper to check for MST outputs lib/igt_kms: Fix max_non_joiner_mode_found
lib/igt_kms: Export get_max_pipe_hdisplay as public helper tests/intel/kms_joiner: Require boundary mode for basic-max-non-joiner tests/kms_pipe_crc_basic: Add MST suspend-resume test

 lib/igt_kms.c                |  25 +--
 lib/igt_kms.h                |   1 +
 tests/intel/kms_joiner.c     |   4 +
 tests/intel/kms_mst_helper.c |  24 ++-
 tests/intel/kms_mst_helper.h |   1 +
 tests/kms_pipe_crc_basic.c   | 318 +++++++++++++++++++++++++++++++++++
 tests/meson.build            |   3 +
 7 files changed, 364 insertions(+), 12 deletions(-)
Signature · 1 line
2.48.1
#1 lore raw

PATCH 1/6 tests/intel/kms_mst_helper: Add kernel-doc for existing function

Convert the doc comment on igt_find_all_mst_output_in_topology to proper kernel-doc.

---
 tests/intel/kms_mst_helper.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
tests/intel/kms_mst_helper.c +3 -2
index aef74cd31..38859cffc 100644
@@ -5,11 +5,12 @@
 
 #include "kms_mst_helper.h"
 
-/*
+/**
+ * igt_find_all_mst_output_in_topology:
  * @drm_fd: DRM file descriptor
  * @display: pointer to #igt_display_t structure
  * @output: target output
- * @mst_outputs: filled with mst output of same toplogy as @output
+ * @mst_outputs: filled with mst output of same topology as @output
  * @num_mst_outputs: filled with count of mst outputs found in topology
  *
  * Iterates over all connected outputs and adds each DP MST
Signature · 1 line
2.48.1
#2 lore raw

PATCH 2/6 tests/intel/kms_mst_helper: Add helper to check for MST outputs

In reply to Kunal Joshi

Add igt_display_has_mst_output() to check if a display has at least one DP MST output connected. This is useful for tests that need to verify MST output availability before running.

---
 tests/intel/kms_mst_helper.c | 19 +++++++++++++++++++
 tests/intel/kms_mst_helper.h |  1 +
 2 files changed, 20 insertions(+)
tests/intel/kms_mst_helper.c +19 -0
index 38859cffc..1918c8d10 100644
@@ -47,3 +47,22 @@ int igt_find_all_mst_output_in_topology(int drm_fd, igt_display_t *display,
 	}
 	return 0;
 }
+
+/**
+ * igt_display_has_mst_output:
+ * @display: pointer to #igt_display_t structure
+ *
+ * Check if a display has at least one DP MST output connected.
+ *
+ * Returns: true if MST output is found, false otherwise
+ */
+bool igt_display_has_mst_output(igt_display_t *display)
+{
+	igt_output_t *output;
+
+	for_each_connected_output(display, output) {
+		if (igt_check_output_is_dp_mst(output))
+			return true;
+	}
+	return false;
+}
tests/intel/kms_mst_helper.h +1 -0
index 7391494ab..0e8ece0a0 100644
@@ -12,4 +12,5 @@ int igt_find_all_mst_output_in_topology(int drm_fd, igt_display_t *display,
 					igt_output_t *output,
 					igt_output_t *mst_outputs[],
 					int *num_mst_outputs);
+bool igt_display_has_mst_output(igt_display_t *display);
 #endif
Signature · 1 line
2.48.1
#3 lore raw

PATCH 3/6 lib/igt_kms: Fix max_non_joiner_mode_found

In reply to Kunal Joshi

Previously the function, instead of giving the highest possible mode the
connector could support, started the check by looking if the mode was
equal to max_pipe_hdisplay. There may be corner cases where a connector never supports the highest mode our source can drive (e.g. a 4K mode on a 5K-capable platform).

Fix this by iterating all modes and tracking the best one (highest hdisplay, then highest clock as a tiebreaker) that does not require a big joiner, as determined by igt_bigjoiner_possible(). This correctly handles connectors with any max resolution.

v2: Reword commit message (Suraj)

Fixes 3830ca6a5068 ("lib/igt_kms: Add support to check joiner mode limit")
---
 lib/igt_kms.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)
lib/igt_kms.c +11 -6
index 04b1f3972..dbd419a9b 100644
@@ -6979,21 +6979,26 @@ bool bigjoiner_mode_found(int drm_fd, drmModeConnector *connector,
  * false otherwise.
  */
 bool max_non_joiner_mode_found(int drm_fd, drmModeConnector *connector,
-			   int max_dotclock, drmModeModeInfo *mode)
+			       int max_dotclock, drmModeModeInfo *mode)
 {
-	int max_hdisplay = get_max_pipe_hdisplay(drm_fd);
+	bool found = false;
 
 	for (int i = 0; i < connector->count_modes; i++) {
 		drmModeModeInfo *current_mode = &connector->modes[i];
 
-		if (current_mode->hdisplay == max_hdisplay &&
-		    current_mode->clock < max_dotclock) {
+		if (igt_bigjoiner_possible(drm_fd, current_mode, max_dotclock))
+			continue;
+
+		if (!found ||
+		    current_mode->hdisplay > mode->hdisplay ||
+		    (current_mode->hdisplay == mode->hdisplay &&
+		     current_mode->clock > mode->clock)) {
 			*mode = *current_mode;
-			return true;
+			found = true;
 		}
 	}
 
-	return false;
+	return found;
 }
 
 /* TODO: Move these lib functions to the joiner-specific library file
Signature · 1 line
2.48.1
#4 lore raw

Re: [PATCH i-g-t 3/6] lib/igt_kms: Fix max_non_joiner_mode_found

Quoted 9 lines · Kunal Joshi

Previously the function, instead of giving the highest possible mode the
connector could support, started the check by looking if the mode was
equal to max_pipe_hdisplay. There may be corner cases where a connector never supports the highest mode our source can drive (e.g. a 4K mode on a 5K-capable platform).

Fix this by iterating all modes and tracking the best one (highest hdisplay, then highest clock as a tiebreaker) that does not require a big joiner, as determined by igt_bigjoiner_possible(). This correctly handles connectors with any max resolution.

I'm not requesting changes right now, but I keep wondering about having the joiner code in igt_kms.[ch] at all. It's an Intel implementation detail. Why is so much of that in the generic file instead of hidden in some Intel specific file or directory?

BR,
Jani.

Quoted 48 lines

v2: Reword commit message (Suraj)

Fixes 3830ca6a5068 ("lib/igt_kms: Add support to check joiner mode limit")
---
 lib/igt_kms.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)
lib/igt_kms.c +11 -6
index 04b1f3972..dbd419a9b 100644
@@ -6979,21 +6979,26 @@ bool bigjoiner_mode_found(int drm_fd, drmModeConnector *connector,
  * false otherwise.
  */
 bool max_non_joiner_mode_found(int drm_fd, drmModeConnector *connector,
-			   int max_dotclock, drmModeModeInfo *mode)
+			       int max_dotclock, drmModeModeInfo *mode)
 {
-	int max_hdisplay = get_max_pipe_hdisplay(drm_fd);
+	bool found = false;
 
 	for (int i = 0; i < connector->count_modes; i++) {
 		drmModeModeInfo *current_mode = &connector->modes[i];
 
-		if (current_mode->hdisplay == max_hdisplay &&
-		    current_mode->clock < max_dotclock) {
+		if (igt_bigjoiner_possible(drm_fd, current_mode, max_dotclock))
+			continue;
+
+		if (!found ||
+		    current_mode->hdisplay > mode->hdisplay ||
+		    (current_mode->hdisplay == mode->hdisplay &&
+		     current_mode->clock > mode->clock)) {
 			*mode = *current_mode;
-			return true;
+			found = true;
 		}
 	}
 
-	return false;
+	return found;
 }
 
 /* TODO: Move these lib functions to the joiner-specific library file
Signature · 1 line
Jani Nikula, Intel
#5 lore raw

Re: [PATCH i-g-t 3/6] lib/igt_kms: Fix max_non_joiner_mode_found

Hello Jani,

Quoted 10 lines · Jani Nikula
Quoted 9 lines · Kunal Joshi

Previously the function, instead of giving the highest possible mode the
connector could support, started the check by looking if the mode was
equal to max_pipe_hdisplay. There may be corner cases where a connector never supports the highest mode our source can drive (e.g. a 4K mode on a 5K-capable platform).

Fix this by iterating all modes and tracking the best one (highest hdisplay, then highest clock as a tiebreaker) that does not require a big joiner, as determined by igt_bigjoiner_possible(). This correctly handles connectors with any max resolution.

Quoted 7 lines

I'm not requesting changes right now, but I keep wondering about having the joiner code in igt_kms.[ch] at all. It's an Intel implementation detail. Why is so much of that in the generic file instead of hidden in some Intel specific file or directory?

BR,
Jani.

Yeah right,
We actually have a helper for joiner related function (kms_joiner_helper), Do you think that this approach makes sense to have feature helpers?

Thanks and Regards
Kunal Joshi

Quoted 49 lines
Quoted 49 lines

v2: Reword commit message (Suraj)

Fixes 3830ca6a5068 ("lib/igt_kms: Add support to check joiner mode limit")
---
  lib/igt_kms.c | 17 +++++++++++------
  1 file changed, 11 insertions(+), 6 deletions(-)
lib/igt_kms.c +11 -6
index 04b1f3972..dbd419a9b 100644
@@ -6979,21 +6979,26 @@ bool bigjoiner_mode_found(int drm_fd, drmModeConnector *connector,
   * false otherwise.
   */
  bool max_non_joiner_mode_found(int drm_fd, drmModeConnector *connector,
-			   int max_dotclock, drmModeModeInfo *mode)
+			       int max_dotclock, drmModeModeInfo *mode)
  {
-	int max_hdisplay = get_max_pipe_hdisplay(drm_fd);
+	bool found = false;
 
  	for (int i = 0; i < connector->count_modes; i++) {
  		drmModeModeInfo *current_mode = &connector->modes[i];
 
-		if (current_mode->hdisplay == max_hdisplay &&
-		    current_mode->clock < max_dotclock) {
+		if (igt_bigjoiner_possible(drm_fd, current_mode, max_dotclock))
+			continue;
+
+		if (!found ||
+		    current_mode->hdisplay > mode->hdisplay ||
+		    (current_mode->hdisplay == mode->hdisplay &&
+		     current_mode->clock > mode->clock)) {
  			*mode = *current_mode;
-			return true;
+			found = true;
  		}
  	}
 
-	return false;
+	return found;
  }
 
  /* TODO: Move these lib functions to the joiner-specific library file
#6 lore raw

PATCH 4/6 lib/igt_kms: Export get_max_pipe_hdisplay as public helper

In reply to Kunal Joshi

Rename the static get_max_pipe_hdisplay to igt_get_max_pipe_hdisplay and export it as a public API. This function returns the maximum hdisplay a single pipe can drive. Tests like basic-max-non-joiner need this value to distinguish outputs that can reach the single-pipe boundary from those that cannot

---
 lib/igt_kms.c | 8 ++++----
 lib/igt_kms.h | 1 +
 2 files changed, 5 insertions(+), 4 deletions(-)
lib/igt_kms.c +4 -4
index dbd419a9b..961538932 100644
@@ -6907,12 +6907,12 @@ int igt_get_current_cdclk(int fd)
 }
 
 /**
- * get_max_hdisplay:
+ * igt_get_max_pipe_hdisplay:
  * @drm_fd: drm file descriptor
  *
  * Returns: The maximum hdisplay supported per pipe.
  */
-static int get_max_pipe_hdisplay(int drm_fd)
+int igt_get_max_pipe_hdisplay(int drm_fd)
 {
 	int dev_id = intel_get_drm_devid(drm_fd);
 
@@ -6933,7 +6933,7 @@ static int get_max_pipe_hdisplay(int drm_fd)
  */
 bool igt_bigjoiner_possible(int drm_fd, drmModeModeInfo *mode, int max_dotclock)
 {
-	return (mode->hdisplay > get_max_pipe_hdisplay(drm_fd) ||
+	return (mode->hdisplay > igt_get_max_pipe_hdisplay(drm_fd) ||
 		mode->clock > max_dotclock);
 }
 
@@ -7047,7 +7047,7 @@ bool igt_is_joiner_enabled_for_pipe(int drmfd, enum pipe pipe)
  */
 bool igt_ultrajoiner_possible(int drm_fd, drmModeModeInfo *mode, int max_dotclock)
 {
-	return (mode->hdisplay > 2 * get_max_pipe_hdisplay(drm_fd) ||
+	return (mode->hdisplay > 2 * igt_get_max_pipe_hdisplay(drm_fd) ||
 		mode->clock > 2 * max_dotclock);
 }
 
lib/igt_kms.h +1 -0
index f994d91d3..2b5196c90 100644
@@ -1236,6 +1236,7 @@ void igt_sort_connector_modes(drmModeConnector *connector,
 bool igt_max_bpc_constraint(igt_display_t *display, igt_crtc_t *crtc,
 			    igt_output_t *output, int bpc);
 int igt_get_max_dotclock(int fd);
+int igt_get_max_pipe_hdisplay(int drm_fd);
 int igt_get_max_cdclk(int fd);
 int igt_get_current_cdclk(int fd);
 bool igt_bigjoiner_possible(int drm_fd, drmModeModeInfo *mode, int max_dotclock);
Signature · 1 line
2.48.1
#7 lore raw

Re: [PATCH i-g-t 4/6] lib/igt_kms: Export get_max_pipe_hdisplay as public helper

Quoted 18 lines · Kunal Joshi

Rename the static get_max_pipe_hdisplay to igt_get_max_pipe_hdisplay and export it as a public API. This function returns the maximum hdisplay a single pipe can drive. Tests like basic-max-non-joiner need this value to distinguish outputs that can reach the single-pipe boundary from those that cannot

---
 lib/igt_kms.c | 8 ++++----
 lib/igt_kms.h | 1 +
 2 files changed, 5 insertions(+), 4 deletions(-)
lib/igt_kms.c +0 -0
index dbd419a9b..961538932 100644
@@ -6907,12 +6907,12 @@ int igt_get_current_cdclk(int fd)
 }

lib/igt_kms.c int igt_get_current_cdclk(int fd) · line 6915

Quoted 10 lines
lib/igt_kms.c +2 -2
 
 /**
- * get_max_hdisplay:
+ * igt_get_max_pipe_hdisplay:
  * @drm_fd: drm file descriptor
  *
  * Returns: The maximum hdisplay supported per pipe.
  */
-static int get_max_pipe_hdisplay(int drm_fd)
+int igt_get_max_pipe_hdisplay(int drm_fd)

This is purely about Intel limitations, isn't it? The name is misleading for anything else.

BR,
Jani.

Quoted 33 lines
lib/igt_kms.c +2 -2
 {
 	int dev_id = intel_get_drm_devid(drm_fd);
 
@@ -6933,7 +6933,7 @@ static int get_max_pipe_hdisplay(int drm_fd)
  */
 bool igt_bigjoiner_possible(int drm_fd, drmModeModeInfo *mode, int max_dotclock)
 {
-	return (mode->hdisplay > get_max_pipe_hdisplay(drm_fd) ||
+	return (mode->hdisplay > igt_get_max_pipe_hdisplay(drm_fd) ||
 		mode->clock > max_dotclock);
 }
 
@@ -7047,7 +7047,7 @@ bool igt_is_joiner_enabled_for_pipe(int drmfd, enum pipe pipe)
  */
 bool igt_ultrajoiner_possible(int drm_fd, drmModeModeInfo *mode, int max_dotclock)
 {
-	return (mode->hdisplay > 2 * get_max_pipe_hdisplay(drm_fd) ||
+	return (mode->hdisplay > 2 * igt_get_max_pipe_hdisplay(drm_fd) ||
 		mode->clock > 2 * max_dotclock);
 }
 
lib/igt_kms.h +1 -0
index f994d91d3..2b5196c90 100644
@@ -1236,6 +1236,7 @@ void igt_sort_connector_modes(drmModeConnector *connector,
 bool igt_max_bpc_constraint(igt_display_t *display, igt_crtc_t *crtc,
 			    igt_output_t *output, int bpc);
 int igt_get_max_dotclock(int fd);
+int igt_get_max_pipe_hdisplay(int drm_fd);
 int igt_get_max_cdclk(int fd);
 int igt_get_current_cdclk(int fd);
 bool igt_bigjoiner_possible(int drm_fd, drmModeModeInfo *mode, int max_dotclock);
Signature · 1 line
Jani Nikula, Intel
#8 lore raw

Re: [PATCH i-g-t 4/6] lib/igt_kms: Export get_max_pipe_hdisplay as public helper

Hello Jani,

Quoted 32 lines · Jani Nikula
Quoted 18 lines · Kunal Joshi

Rename the static get_max_pipe_hdisplay to igt_get_max_pipe_hdisplay and export it as a public API. This function returns the maximum hdisplay a single pipe can drive. Tests like basic-max-non-joiner need this value to distinguish outputs that can reach the single-pipe boundary from those that cannot

---
  lib/igt_kms.c | 8 ++++----
  lib/igt_kms.h | 1 +
  2 files changed, 5 insertions(+), 4 deletions(-)
lib/igt_kms.c +0 -0
index dbd419a9b..961538932 100644
@@ -6907,12 +6907,12 @@ int igt_get_current_cdclk(int fd)
  }

lib/igt_kms.c int igt_get_current_cdclk(int fd) · line 6915

Quoted 10 lines
lib/igt_kms.c +2 -2
 
  /**
- * get_max_hdisplay:
+ * igt_get_max_pipe_hdisplay:
   * @drm_fd: drm file descriptor
   *
   * Returns: The maximum hdisplay supported per pipe.
   */
-static int get_max_pipe_hdisplay(int drm_fd)
+int igt_get_max_pipe_hdisplay(int drm_fd)

This is purely about Intel limitations, isn't it? The name is misleading for anything else.

Quoted 2 lines

BR,
Jani.

Correct, Will add intel prefix.

Thanks and Regards
Kunal Joshi

Quoted 34 lines
Quoted 34 lines
lib/igt_kms.c +2 -2
  {
  	int dev_id = intel_get_drm_devid(drm_fd);
 
@@ -6933,7 +6933,7 @@ static int get_max_pipe_hdisplay(int drm_fd)
   */
  bool igt_bigjoiner_possible(int drm_fd, drmModeModeInfo *mode, int max_dotclock)
  {
-	return (mode->hdisplay > get_max_pipe_hdisplay(drm_fd) ||
+	return (mode->hdisplay > igt_get_max_pipe_hdisplay(drm_fd) ||
  		mode->clock > max_dotclock);
  }
 
@@ -7047,7 +7047,7 @@ bool igt_is_joiner_enabled_for_pipe(int drmfd, enum pipe pipe)
   */
  bool igt_ultrajoiner_possible(int drm_fd, drmModeModeInfo *mode, int max_dotclock)
  {
-	return (mode->hdisplay > 2 * get_max_pipe_hdisplay(drm_fd) ||
+	return (mode->hdisplay > 2 * igt_get_max_pipe_hdisplay(drm_fd) ||
  		mode->clock > 2 * max_dotclock);
  }
 
lib/igt_kms.h +1 -0
index f994d91d3..2b5196c90 100644
@@ -1236,6 +1236,7 @@ void igt_sort_connector_modes(drmModeConnector *connector,
  bool igt_max_bpc_constraint(igt_display_t *display, igt_crtc_t *crtc,
  			    igt_output_t *output, int bpc);
  int igt_get_max_dotclock(int fd);
+int igt_get_max_pipe_hdisplay(int drm_fd);
  int igt_get_max_cdclk(int fd);
  int igt_get_current_cdclk(int fd);
  bool igt_bigjoiner_possible(int drm_fd, drmModeModeInfo *mode, int max_dotclock);
#9 lore raw

PATCH 5/6 tests/intel/kms_joiner: Require boundary mode for basic-max-non-joiner

In reply to Kunal Joshi

Skip when the returned mode's hdisplay is below the platform's single-pipe limit.

---
 tests/intel/kms_joiner.c | 4 ++++
 1 file changed, 4 insertions(+)
tests/intel/kms_joiner.c +4 -0
index 86226a3ba..5f3914ca1 100644
@@ -572,6 +572,7 @@ static void test_ultra_joiner(data_t *data, bool invalid_pipe, bool two_display,
 static void test_basic_max_non_joiner(data_t *data)
 {
 	igt_display_t *display = &data->display;
+	int max_hdisplay = igt_get_max_pipe_hdisplay(data->drm_fd);
 	int count;
 	enum pipe pipe;
 	igt_output_t **outputs, *output;
@@ -597,6 +598,9 @@ static void test_basic_max_non_joiner(data_t *data)
 				igt_require(max_non_joiner_mode_found(data->drm_fd,
 								      output->config.connector,
 								      max_dotclock, &mode));
+				igt_require_f(mode.hdisplay >= max_hdisplay,
+					      "Max non-joiner mode %dx%d below single-pipe limit %d\n",
+					      mode.hdisplay, mode.vdisplay, max_hdisplay);
 				igt_output_override_mode(output, &mode);
 				igt_info("Appplying mode = %dx%d@%d\n", mode.hdisplay,
 					 mode.vdisplay, mode.vrefresh);
Signature · 1 line
2.48.1
#10 lore raw

PATCH 6/6 tests/kms_pipe_crc_basic: Add MST suspend-resume test

In reply to Kunal Joshi

Add a new subtest mst-suspend-read-crc that verifies MST outputs preserve display content (via CRC comparison) across S3 suspend/resume.

The test enumerates all connected DP MST topologies, and for each root connector exercises all non-empty subsets of the discovered MST outputs. For each subset it:
- Assigns pipes and selects non-joiner modes
- Fits modes within bandwidth constraints
- Creates green FBs, commits, and collects pre-suspend CRCs
- Suspends to memory and resumes
- Collects post-suspend CRCs and asserts they match

v2:
- Add error handling for igt_pipe_crc_new (Thasleem)
- Improve log format with index for clarity (Thasleem)
- Order declarations in decreasing line length (Thasleem)
- Add print message when no MST found (Thasleem)
- Add bounds check for idx in subset loop (Thasleem)
- Use igt_crtc_crc_new() instead of igt_pipe_crc_new() (Ville)

v3:
- framebuffers missing in commit (Bilal)

v4:
- Drop cleanup framework

v5:
- Use igt_debug instead of igt_info for CRC logging (Thasleem)
- Remove comments (Suraj)
- Remove double vblank waits before/after suspend (Suraj)
- Rename variable (Thasleem)
- Two-pass approach (Suraj)

---
 tests/kms_pipe_crc_basic.c | 318 +++++++++++++++++++++++++++++++++++++
 tests/meson.build          |   3 +
 2 files changed, 321 insertions(+)
tests/kms_pipe_crc_basic.c +318 -0
index 42e141545..d8369807e 100644
@@ -32,7 +32,10 @@
 
 #include "igt.h"
 #include "igt_sysfs.h"
+#include "intel/kms_mst_helper.h"
+#include "intel/kms_joiner_helper.h"
 #include <errno.h>
+#include <limits.h>
 #include <stdbool.h>
 #include <stdio.h>
 #include <string.h>
@@ -77,6 +80,11 @@
  *              CRTC does not cause issues.
  */
 
+/**
+ * SUBTEST: mst-suspend-read-crc
+ * Description: MST suspend test for pipe CRC reads.
+ */
+
 static bool extended;
 static int active_crtcs[IGT_MAX_PIPES];
 static uint32_t last_crtc_index;
@@ -96,6 +104,310 @@ static struct {
 	{ .r = 0.0, .g = 1.0, .b = 1.0 },
 };
 
+#define MAX_MST_OUTPUT	3
+
+struct mst_root_info {
+	int root_id;
+	igt_output_t *mst_outputs[IGT_MAX_PIPES];
+	int num_mst;
+};
+
+static void collect_single_crc(igt_crtc_t *crtc, igt_crc_t *crc)
+{
+	igt_pipe_crc_t *pipe_crc;
+
+	pipe_crc = igt_crtc_crc_new(crtc, IGT_PIPE_CRC_SOURCE_AUTO);
+	igt_assert(pipe_crc);
+	igt_pipe_crc_collect_crc(pipe_crc, crc);
+	igt_pipe_crc_free(pipe_crc);
+}
+
+static void collect_crc_for_active_outputs(igt_output_t **outputs,
+					   int num_outputs,
+					   igt_crc_t *crcs,
+					   bool post_suspend)
+{
+	int i;
+
+	for (i = 0; i < num_outputs; i++) {
+		igt_output_t *output = outputs[i];
+		igt_crtc_t *crtc = igt_output_get_driving_crtc(output);
+
+		if (post_suspend)
+			igt_require_f(crtc,
+				      "POST-SUSPEND: no driving CRTC for %s (topology changed?)\n",
+				      output->name);
+		else
+			igt_assert_f(crtc,
+				     "PRE-SUSPEND: no driving CRTC for %s (bad pipe assignment?)\n",
+				     output->name);
+
+		collect_single_crc(crtc, &crcs[i]);
+	}
+}
+
+static void wait_for_vblanks(igt_output_t **outputs, int num_outputs,
+			     bool post_suspend)
+{
+	int i;
+
+	for (i = 0; i < num_outputs; i++) {
+		igt_crtc_t *crtc = igt_output_get_driving_crtc(outputs[i]);
+
+		if (post_suspend)
+			igt_require_f(crtc,
+				      "POST-SUSPEND: no driving CRTC for %s during vblank wait (topology changed?)\n",
+				      outputs[i]->name);
+		else
+			igt_assert_f(crtc,
+				     "PRE-SUSPEND: no driving CRTC for %s during vblank wait (bad pipe assignment?)\n",
+				     outputs[i]->name);
+
+		igt_wait_for_vblank(crtc);
+	}
+}
+
+static void log_crc_for_outputs(igt_output_t **outputs, int num_outputs,
+				igt_crc_t *crcs, const char *stage)
+{
+	int i;
+
+	for (i = 0; i < num_outputs; i++) {
+		igt_output_t *o = outputs[i];
+		drmModeModeInfo *m = igt_output_get_mode(o);
+		char *s = igt_crc_to_string(&crcs[i]);
+		igt_crtc_t *crtc = igt_output_get_driving_crtc(o);
+
+		igt_debug("[%d] %s: output %s -> crtc %s, CRC %s, mode %dx%d@%d\n",
+			  i, stage, o->name,
+			  igt_crtc_name(crtc),
+			  s,
+			  m ? m->hdisplay : -1,
+			  m ? m->vdisplay : -1,
+			  m ? m->vrefresh : 0);
+		free(s);
+	}
+}
+
+static void select_non_joiner_modes(int drm_fd, igt_output_t **outputs,
+				    int num_outputs)
+{
+	int max_dotclock = igt_get_max_dotclock(drm_fd);
+	int i;
+
+	if (max_dotclock <= 0)
+		max_dotclock = INT_MAX;
+
+	for (i = 0; i < num_outputs; i++) {
+		igt_output_t *output = outputs[i];
+		drmModeModeInfo non_joiner_mode;
+
+		igt_require_f(max_non_joiner_mode_found(drm_fd,
+							output->config.connector,
+							max_dotclock,
+							&non_joiner_mode),
+			      "No non-joiner mode found for %s\n",
+			      output->name);
+		igt_output_override_mode(output, &non_joiner_mode);
+	}
+}
+
+static void create_fbs_for_outputs(int drm_fd, igt_output_t **outputs,
+				   int num_outputs, struct igt_fb *fbs)
+{
+	int i;
+
+	for (i = 0; i < num_outputs; i++) {
+		igt_output_t *output = outputs[i];
+		drmModeModeInfo *mode = igt_output_get_mode(output);
+		igt_plane_t *primary;
+
+		igt_require_f(mode, "No mode available for output %s\n", output->name);
+
+		primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
+
+		igt_create_color_fb(drm_fd,
+				    mode->hdisplay, mode->vdisplay,
+				    DRM_FORMAT_XRGB8888,
+				    DRM_FORMAT_MOD_LINEAR,
+				    0.0, 1.0, 0.0,
+				    &fbs[i]);
+		igt_plane_set_fb(primary, &fbs[i]);
+	}
+}
+
+static void run_mst_subset_and_verify(igt_display_t *display,
+				      igt_output_t **active_outputs,
+				      int num_active,
+				      int n_crtcs,
+				      uint32_t master_pipes_mask,
+				      uint32_t valid_pipes_mask)
+{
+	igt_crc_t pre_crcs[MAX_MST_OUTPUT];
+	igt_crc_t post_crcs[MAX_MST_OUTPUT];
+	struct igt_fb fbs[MAX_MST_OUTPUT];
+	uint32_t used_pipes_mask = 0;
+	enum igt_suspend_test stest = SUSPEND_TEST_NONE;
+	int drm_fd = display->drm_fd;
+	int i;
+
+	igt_require_f(num_active <= n_crtcs,
+		      "Not enough crtcs for MST subset\n");
+
+	igt_require(igt_assign_pipes_for_outputs(drm_fd,
+						 active_outputs,
+						 num_active,
+						 n_crtcs,
+						 &used_pipes_mask,
+						 master_pipes_mask,
+						 valid_pipes_mask));
+
+	select_non_joiner_modes(drm_fd, active_outputs, num_active);
+
+	igt_require_f(igt_fit_modes_in_bw(display),
+		      "Unable to fit modes in bw\n");
+
+	create_fbs_for_outputs(drm_fd, active_outputs, num_active, fbs);
+
+	igt_display_commit2(display, COMMIT_ATOMIC);
+
+	/* rtcwake cmd is not supported on MTK devices */
+	if (is_mtk_device(drm_fd))
+		stest = SUSPEND_TEST_DEVICES;
+
+	igt_info("MST subset: %d outputs, n_crtcs=%d\n",
+		 num_active, n_crtcs);
+
+	wait_for_vblanks(active_outputs, num_active, false);
+
+	collect_crc_for_active_outputs(active_outputs,
+				       num_active,
+				       pre_crcs, false);
+
+	log_crc_for_outputs(active_outputs, num_active, pre_crcs, "PRE-SUSPEND");
+
+	igt_system_suspend_autoresume(SUSPEND_STATE_MEM, stest);
+
+	wait_for_vblanks(active_outputs, num_active, true);
+
+	collect_crc_for_active_outputs(active_outputs,
+				       num_active,
+				       post_crcs, true);
+
+	log_crc_for_outputs(active_outputs, num_active, post_crcs, "POST-SUSPEND");
+
+	for (i = 0; i < num_active; i++)
+		igt_assert_crc_equal(&pre_crcs[i], &post_crcs[i]);
+
+	/* Detach FBs from planes and remove them to leave a clean state */
+	for (i = 0; i < num_active; i++) {
+		igt_plane_t *primary =
+			igt_output_get_plane_type(active_outputs[i],
+						  DRM_PLANE_TYPE_PRIMARY);
+		igt_plane_set_fb(primary, NULL);
+		igt_remove_fb(drm_fd, &fbs[i]);
+	}
+}
+
+static int discover_mst_roots(igt_display_t *display,
+			      struct mst_root_info *roots)
+{
+	igt_output_t *output;
+	int drm_fd = display->drm_fd;
+	int num_roots = 0;
+	int ret, i;
+
+	for_each_connected_output(display, output) {
+		bool root_seen = false;
+		int root_id;
+
+		root_id = igt_get_dp_mst_connector_id(output);
+		if (root_id < 0)
+			continue;
+
+		for (i = 0; i < num_roots; i++)
+			if (roots[i].root_id == root_id)
+				root_seen = true;
+
+		if (root_seen)
+			continue;
+
+		if (num_roots >= IGT_MAX_PIPES)
+			break;
+
+		roots[num_roots].root_id = root_id;
+		roots[num_roots].num_mst = 0;
+		ret = igt_find_all_mst_output_in_topology(drm_fd,
+							  display, output,
+							  roots[num_roots].mst_outputs,
+							  &roots[num_roots].num_mst);
+		igt_require(ret == 0);
+
+		if (roots[num_roots].num_mst == 0)
+			continue;
+
+		if (roots[num_roots].num_mst > MAX_MST_OUTPUT)
+			roots[num_roots].num_mst = MAX_MST_OUTPUT;
+
+		num_roots++;
+	}
+
+	return num_roots;
+}
+
+static void mst_suspend_read_crc(igt_display_t *display)
+{
+	struct mst_root_info roots[IGT_MAX_PIPES];
+	igt_output_t *active_outputs[MAX_MST_OUTPUT];
+	uint32_t valid_pipes_mask = 0;
+	uint32_t master_pipes_mask;
+	int n_crtcs = igt_display_n_crtcs(display);
+	int num_roots, num_active, i;
+	igt_crtc_t *crtc;
+
+	for_each_crtc(display, crtc)
+		valid_pipes_mask |= BIT(crtc->pipe);
+
+	igt_set_all_master_pipes_for_platform(display, &master_pipes_mask);
+
+	num_roots = discover_mst_roots(display, roots);
+	igt_require_f(num_roots > 0, "No MST roots found\n");
+
+	for (i = 0; i < num_roots; i++) {
+		igt_dynamic_f("mst-root-%d", roots[i].root_id) {
+			int mask;
+
+			for (mask = 1; mask < (1 << roots[i].num_mst); mask++) {
+				int bit, idx = 0;
+
+				for (bit = 0; bit < roots[i].num_mst; bit++) {
+					if (!(mask & (1 << bit)))
+						continue;
+
+					if (idx >= MAX_MST_OUTPUT)
+						break;
+
+					active_outputs[idx++] =
+						roots[i].mst_outputs[bit];
+				}
+
+				num_active = idx;
+				if (!num_active)
+					continue;
+
+				igt_display_reset(display);
+
+				run_mst_subset_and_verify(display,
+							  active_outputs,
+							  num_active,
+							  n_crtcs,
+							  master_pipes_mask,
+							  valid_pipes_mask);
+			}
+		}
+	}
+}
+
 static bool simulation_constraint(igt_crtc_t *crtc)
 {
 	if (igt_run_in_simulation() && !extended &&
@@ -525,6 +837,12 @@ int igt_main_args("e", NULL, help_str, opt_handler, NULL)
 		}
 	}
 
+	igt_describe("MST suspend test for pipe CRC reads.");
+	igt_subtest_with_dynamic("mst-suspend-read-crc") {
+		igt_require(igt_display_has_mst_output(&data.display));
+		mst_suspend_read_crc(&data.display);
+	}
+
 	igt_fixture() {
 		igt_display_fini(&data.display);
 		drm_close_driver(data.drm_fd);
tests/meson.build +3 -0
index cecb4a8ae..a1e42755e 100644
@@ -402,6 +402,9 @@ extra_sources = {
            join_paths ('intel', 'kms_joiner_helper.c') ],
 	'kms_dsc': [ join_paths ('intel', 'kms_dsc_helper.c') ],
 	'kms_joiner': [ join_paths ('intel', 'kms_joiner_helper.c') ],
+	'kms_pipe_crc_basic': [
+           join_paths ('intel', 'kms_mst_helper.c'),
+           join_paths ('intel', 'kms_joiner_helper.c') ],
 	'kms_psr2_sf':  [ join_paths ('intel', 'kms_dsc_helper.c') ],
 }
 
Signature · 1 line
2.48.1
#11 lore raw

Re: [PATCH i-g-t 6/6] tests/kms_pipe_crc_basic: Add MST suspend-resume test

Quoted 11 lines · Kunal Joshi

Add a new subtest mst-suspend-read-crc that verifies MST outputs preserve display content (via CRC comparison) across S3 suspend/resume.

The test enumerates all connected DP MST topologies, and for each root connector exercises all non-empty subsets of the discovered MST outputs. For each subset it:
- Assigns pipes and selects non-joiner modes
- Fits modes within bandwidth constraints
- Creates green FBs, commits, and collects pre-suspend CRCs
- Suspends to memory and resumes
- Collects post-suspend CRCs and asserts they match

tests/kms_pipe_crc_basic.c is supposed to be the basic CRC test. Adding MST to it is fine, I guess, but adding all the Intel specific joiner stuff here seems questionable.

IMO basically anything that needs to know anything about the concept of "pipes" (as opposed to CRTCs and CRTC indexes) should be inside tests/intel or minimized within checks for Intel devices.

BR,
Jani.

Quoted 393 lines

v2:
- Add error handling for igt_pipe_crc_new (Thasleem)
- Improve log format with index for clarity (Thasleem)
- Order declarations in decreasing line length (Thasleem)
- Add print message when no MST found (Thasleem)
- Add bounds check for idx in subset loop (Thasleem)
- Use igt_crtc_crc_new() instead of igt_pipe_crc_new() (Ville)

v3:
- framebuffers missing in commit (Bilal)

v4:
- Drop cleanup framework

v5:
- Use igt_debug instead of igt_info for CRC logging (Thasleem)
- Remove comments (Suraj)
- Remove double vblank waits before/after suspend (Suraj)
- Rename variable (Thasleem)
- Two-pass approach (Suraj)

---
 tests/kms_pipe_crc_basic.c | 318 +++++++++++++++++++++++++++++++++++++
 tests/meson.build          |   3 +
 2 files changed, 321 insertions(+)
tests/kms_pipe_crc_basic.c +318 -0
index 42e141545..d8369807e 100644
@@ -32,7 +32,10 @@
 
 #include "igt.h"
 #include "igt_sysfs.h"
+#include "intel/kms_mst_helper.h"
+#include "intel/kms_joiner_helper.h"
 #include <errno.h>
+#include <limits.h>
 #include <stdbool.h>
 #include <stdio.h>
 #include <string.h>
@@ -77,6 +80,11 @@
  *              CRTC does not cause issues.
  */
 
+/**
+ * SUBTEST: mst-suspend-read-crc
+ * Description: MST suspend test for pipe CRC reads.
+ */
+
 static bool extended;
 static int active_crtcs[IGT_MAX_PIPES];
 static uint32_t last_crtc_index;
@@ -96,6 +104,310 @@ static struct {
 	{ .r = 0.0, .g = 1.0, .b = 1.0 },
 };
 
+#define MAX_MST_OUTPUT	3
+
+struct mst_root_info {
+	int root_id;
+	igt_output_t *mst_outputs[IGT_MAX_PIPES];
+	int num_mst;
+};
+
+static void collect_single_crc(igt_crtc_t *crtc, igt_crc_t *crc)
+{
+	igt_pipe_crc_t *pipe_crc;
+
+	pipe_crc = igt_crtc_crc_new(crtc, IGT_PIPE_CRC_SOURCE_AUTO);
+	igt_assert(pipe_crc);
+	igt_pipe_crc_collect_crc(pipe_crc, crc);
+	igt_pipe_crc_free(pipe_crc);
+}
+
+static void collect_crc_for_active_outputs(igt_output_t **outputs,
+					   int num_outputs,
+					   igt_crc_t *crcs,
+					   bool post_suspend)
+{
+	int i;
+
+	for (i = 0; i < num_outputs; i++) {
+		igt_output_t *output = outputs[i];
+		igt_crtc_t *crtc = igt_output_get_driving_crtc(output);
+
+		if (post_suspend)
+			igt_require_f(crtc,
+				      "POST-SUSPEND: no driving CRTC for %s (topology changed?)\n",
+				      output->name);
+		else
+			igt_assert_f(crtc,
+				     "PRE-SUSPEND: no driving CRTC for %s (bad pipe assignment?)\n",
+				     output->name);
+
+		collect_single_crc(crtc, &crcs[i]);
+	}
+}
+
+static void wait_for_vblanks(igt_output_t **outputs, int num_outputs,
+			     bool post_suspend)
+{
+	int i;
+
+	for (i = 0; i < num_outputs; i++) {
+		igt_crtc_t *crtc = igt_output_get_driving_crtc(outputs[i]);
+
+		if (post_suspend)
+			igt_require_f(crtc,
+				      "POST-SUSPEND: no driving CRTC for %s during vblank wait (topology changed?)\n",
+				      outputs[i]->name);
+		else
+			igt_assert_f(crtc,
+				     "PRE-SUSPEND: no driving CRTC for %s during vblank wait (bad pipe assignment?)\n",
+				     outputs[i]->name);
+
+		igt_wait_for_vblank(crtc);
+	}
+}
+
+static void log_crc_for_outputs(igt_output_t **outputs, int num_outputs,
+				igt_crc_t *crcs, const char *stage)
+{
+	int i;
+
+	for (i = 0; i < num_outputs; i++) {
+		igt_output_t *o = outputs[i];
+		drmModeModeInfo *m = igt_output_get_mode(o);
+		char *s = igt_crc_to_string(&crcs[i]);
+		igt_crtc_t *crtc = igt_output_get_driving_crtc(o);
+
+		igt_debug("[%d] %s: output %s -> crtc %s, CRC %s, mode %dx%d@%d\n",
+			  i, stage, o->name,
+			  igt_crtc_name(crtc),
+			  s,
+			  m ? m->hdisplay : -1,
+			  m ? m->vdisplay : -1,
+			  m ? m->vrefresh : 0);
+		free(s);
+	}
+}
+
+static void select_non_joiner_modes(int drm_fd, igt_output_t **outputs,
+				    int num_outputs)
+{
+	int max_dotclock = igt_get_max_dotclock(drm_fd);
+	int i;
+
+	if (max_dotclock <= 0)
+		max_dotclock = INT_MAX;
+
+	for (i = 0; i < num_outputs; i++) {
+		igt_output_t *output = outputs[i];
+		drmModeModeInfo non_joiner_mode;
+
+		igt_require_f(max_non_joiner_mode_found(drm_fd,
+							output->config.connector,
+							max_dotclock,
+							&non_joiner_mode),
+			      "No non-joiner mode found for %s\n",
+			      output->name);
+		igt_output_override_mode(output, &non_joiner_mode);
+	}
+}
+
+static void create_fbs_for_outputs(int drm_fd, igt_output_t **outputs,
+				   int num_outputs, struct igt_fb *fbs)
+{
+	int i;
+
+	for (i = 0; i < num_outputs; i++) {
+		igt_output_t *output = outputs[i];
+		drmModeModeInfo *mode = igt_output_get_mode(output);
+		igt_plane_t *primary;
+
+		igt_require_f(mode, "No mode available for output %s\n", output->name);
+
+		primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
+
+		igt_create_color_fb(drm_fd,
+				    mode->hdisplay, mode->vdisplay,
+				    DRM_FORMAT_XRGB8888,
+				    DRM_FORMAT_MOD_LINEAR,
+				    0.0, 1.0, 0.0,
+				    &fbs[i]);
+		igt_plane_set_fb(primary, &fbs[i]);
+	}
+}
+
+static void run_mst_subset_and_verify(igt_display_t *display,
+				      igt_output_t **active_outputs,
+				      int num_active,
+				      int n_crtcs,
+				      uint32_t master_pipes_mask,
+				      uint32_t valid_pipes_mask)
+{
+	igt_crc_t pre_crcs[MAX_MST_OUTPUT];
+	igt_crc_t post_crcs[MAX_MST_OUTPUT];
+	struct igt_fb fbs[MAX_MST_OUTPUT];
+	uint32_t used_pipes_mask = 0;
+	enum igt_suspend_test stest = SUSPEND_TEST_NONE;
+	int drm_fd = display->drm_fd;
+	int i;
+
+	igt_require_f(num_active <= n_crtcs,
+		      "Not enough crtcs for MST subset\n");
+
+	igt_require(igt_assign_pipes_for_outputs(drm_fd,
+						 active_outputs,
+						 num_active,
+						 n_crtcs,
+						 &used_pipes_mask,
+						 master_pipes_mask,
+						 valid_pipes_mask));
+
+	select_non_joiner_modes(drm_fd, active_outputs, num_active);
+
+	igt_require_f(igt_fit_modes_in_bw(display),
+		      "Unable to fit modes in bw\n");
+
+	create_fbs_for_outputs(drm_fd, active_outputs, num_active, fbs);
+
+	igt_display_commit2(display, COMMIT_ATOMIC);
+
+	/* rtcwake cmd is not supported on MTK devices */
+	if (is_mtk_device(drm_fd))
+		stest = SUSPEND_TEST_DEVICES;
+
+	igt_info("MST subset: %d outputs, n_crtcs=%d\n",
+		 num_active, n_crtcs);
+
+	wait_for_vblanks(active_outputs, num_active, false);
+
+	collect_crc_for_active_outputs(active_outputs,
+				       num_active,
+				       pre_crcs, false);
+
+	log_crc_for_outputs(active_outputs, num_active, pre_crcs, "PRE-SUSPEND");
+
+	igt_system_suspend_autoresume(SUSPEND_STATE_MEM, stest);
+
+	wait_for_vblanks(active_outputs, num_active, true);
+
+	collect_crc_for_active_outputs(active_outputs,
+				       num_active,
+				       post_crcs, true);
+
+	log_crc_for_outputs(active_outputs, num_active, post_crcs, "POST-SUSPEND");
+
+	for (i = 0; i < num_active; i++)
+		igt_assert_crc_equal(&pre_crcs[i], &post_crcs[i]);
+
+	/* Detach FBs from planes and remove them to leave a clean state */
+	for (i = 0; i < num_active; i++) {
+		igt_plane_t *primary =
+			igt_output_get_plane_type(active_outputs[i],
+						  DRM_PLANE_TYPE_PRIMARY);
+		igt_plane_set_fb(primary, NULL);
+		igt_remove_fb(drm_fd, &fbs[i]);
+	}
+}
+
+static int discover_mst_roots(igt_display_t *display,
+			      struct mst_root_info *roots)
+{
+	igt_output_t *output;
+	int drm_fd = display->drm_fd;
+	int num_roots = 0;
+	int ret, i;
+
+	for_each_connected_output(display, output) {
+		bool root_seen = false;
+		int root_id;
+
+		root_id = igt_get_dp_mst_connector_id(output);
+		if (root_id < 0)
+			continue;
+
+		for (i = 0; i < num_roots; i++)
+			if (roots[i].root_id == root_id)
+				root_seen = true;
+
+		if (root_seen)
+			continue;
+
+		if (num_roots >= IGT_MAX_PIPES)
+			break;
+
+		roots[num_roots].root_id = root_id;
+		roots[num_roots].num_mst = 0;
+		ret = igt_find_all_mst_output_in_topology(drm_fd,
+							  display, output,
+							  roots[num_roots].mst_outputs,
+							  &roots[num_roots].num_mst);
+		igt_require(ret == 0);
+
+		if (roots[num_roots].num_mst == 0)
+			continue;
+
+		if (roots[num_roots].num_mst > MAX_MST_OUTPUT)
+			roots[num_roots].num_mst = MAX_MST_OUTPUT;
+
+		num_roots++;
+	}
+
+	return num_roots;
+}
+
+static void mst_suspend_read_crc(igt_display_t *display)
+{
+	struct mst_root_info roots[IGT_MAX_PIPES];
+	igt_output_t *active_outputs[MAX_MST_OUTPUT];
+	uint32_t valid_pipes_mask = 0;
+	uint32_t master_pipes_mask;
+	int n_crtcs = igt_display_n_crtcs(display);
+	int num_roots, num_active, i;
+	igt_crtc_t *crtc;
+
+	for_each_crtc(display, crtc)
+		valid_pipes_mask |= BIT(crtc->pipe);
+
+	igt_set_all_master_pipes_for_platform(display, &master_pipes_mask);
+
+	num_roots = discover_mst_roots(display, roots);
+	igt_require_f(num_roots > 0, "No MST roots found\n");
+
+	for (i = 0; i < num_roots; i++) {
+		igt_dynamic_f("mst-root-%d", roots[i].root_id) {
+			int mask;
+
+			for (mask = 1; mask < (1 << roots[i].num_mst); mask++) {
+				int bit, idx = 0;
+
+				for (bit = 0; bit < roots[i].num_mst; bit++) {
+					if (!(mask & (1 << bit)))
+						continue;
+
+					if (idx >= MAX_MST_OUTPUT)
+						break;
+
+					active_outputs[idx++] =
+						roots[i].mst_outputs[bit];
+				}
+
+				num_active = idx;
+				if (!num_active)
+					continue;
+
+				igt_display_reset(display);
+
+				run_mst_subset_and_verify(display,
+							  active_outputs,
+							  num_active,
+							  n_crtcs,
+							  master_pipes_mask,
+							  valid_pipes_mask);
+			}
+		}
+	}
+}
+
 static bool simulation_constraint(igt_crtc_t *crtc)
 {
 	if (igt_run_in_simulation() && !extended &&
@@ -525,6 +837,12 @@ int igt_main_args("e", NULL, help_str, opt_handler, NULL)
 		}
 	}
 
+	igt_describe("MST suspend test for pipe CRC reads.");
+	igt_subtest_with_dynamic("mst-suspend-read-crc") {
+		igt_require(igt_display_has_mst_output(&data.display));
+		mst_suspend_read_crc(&data.display);
+	}
+
 	igt_fixture() {
 		igt_display_fini(&data.display);
 		drm_close_driver(data.drm_fd);
tests/meson.build +3 -0
index cecb4a8ae..a1e42755e 100644
@@ -402,6 +402,9 @@ extra_sources = {
            join_paths ('intel', 'kms_joiner_helper.c') ],
 	'kms_dsc': [ join_paths ('intel', 'kms_dsc_helper.c') ],
 	'kms_joiner': [ join_paths ('intel', 'kms_joiner_helper.c') ],
+	'kms_pipe_crc_basic': [
+           join_paths ('intel', 'kms_mst_helper.c'),
+           join_paths ('intel', 'kms_joiner_helper.c') ],
 	'kms_psr2_sf':  [ join_paths ('intel', 'kms_dsc_helper.c') ],
 }
Signature · 1 line
Jani Nikula, Intel
#12 lore raw

Re: [PATCH i-g-t 6/6] tests/kms_pipe_crc_basic: Add MST suspend-resume test

Hello Jani,

Quoted 16 lines · Jani Nikula
Quoted 11 lines · Kunal Joshi

Add a new subtest mst-suspend-read-crc that verifies MST outputs preserve display content (via CRC comparison) across S3 suspend/resume.

The test enumerates all connected DP MST topologies, and for each root connector exercises all non-empty subsets of the discovered MST outputs. For each subset it:
- Assigns pipes and selects non-joiner modes
- Fits modes within bandwidth constraints
- Creates green FBs, commits, and collects pre-suspend CRCs
- Suspends to memory and resumes
- Collects post-suspend CRCs and asserts they match

tests/kms_pipe_crc_basic.c is supposed to be the basic CRC test. Adding MST to it is fine, I guess, but adding all the Intel specific joiner stuff here seems questionable.

Quoted 7 lines

IMO basically anything that needs to know anything about the concept of "pipes" (as opposed to CRTCs and CRTC indexes) should be inside tests/intel or minimized within checks for Intel devices.

BR,
Jani.

Agreed, Will add checks.

Thanks and Regards
Kunal Joshi

Quoted 393 lines
Quoted 393 lines

v2:
- Add error handling for igt_pipe_crc_new (Thasleem)
- Improve log format with index for clarity (Thasleem)
- Order declarations in decreasing line length (Thasleem)
- Add print message when no MST found (Thasleem)
- Add bounds check for idx in subset loop (Thasleem)
- Use igt_crtc_crc_new() instead of igt_pipe_crc_new() (Ville)

v3:
- framebuffers missing in commit (Bilal)

v4:
- Drop cleanup framework

v5:
- Use igt_debug instead of igt_info for CRC logging (Thasleem)
- Remove comments (Suraj)
- Remove double vblank waits before/after suspend (Suraj)
- Rename variable (Thasleem)
- Two-pass approach (Suraj)

---
  tests/kms_pipe_crc_basic.c | 318 +++++++++++++++++++++++++++++++++++++
  tests/meson.build          |   3 +
  2 files changed, 321 insertions(+)
tests/kms_pipe_crc_basic.c +318 -0
index 42e141545..d8369807e 100644
@@ -32,7 +32,10 @@
 
  #include "igt.h"
  #include "igt_sysfs.h"
+#include "intel/kms_mst_helper.h"
+#include "intel/kms_joiner_helper.h"
  #include <errno.h>
+#include <limits.h>
  #include <stdbool.h>
  #include <stdio.h>
  #include <string.h>
@@ -77,6 +80,11 @@
   *              CRTC does not cause issues.
   */
 
+/**
+ * SUBTEST: mst-suspend-read-crc
+ * Description: MST suspend test for pipe CRC reads.
+ */
+
  static bool extended;
  static int active_crtcs[IGT_MAX_PIPES];
  static uint32_t last_crtc_index;
@@ -96,6 +104,310 @@ static struct {
  	{ .r = 0.0, .g = 1.0, .b = 1.0 },
  };
 
+#define MAX_MST_OUTPUT	3
+
+struct mst_root_info {
+	int root_id;
+	igt_output_t *mst_outputs[IGT_MAX_PIPES];
+	int num_mst;
+};
+
+static void collect_single_crc(igt_crtc_t *crtc, igt_crc_t *crc)
+{
+	igt_pipe_crc_t *pipe_crc;
+
+	pipe_crc = igt_crtc_crc_new(crtc, IGT_PIPE_CRC_SOURCE_AUTO);
+	igt_assert(pipe_crc);
+	igt_pipe_crc_collect_crc(pipe_crc, crc);
+	igt_pipe_crc_free(pipe_crc);
+}
+
+static void collect_crc_for_active_outputs(igt_output_t **outputs,
+					   int num_outputs,
+					   igt_crc_t *crcs,
+					   bool post_suspend)
+{
+	int i;
+
+	for (i = 0; i < num_outputs; i++) {
+		igt_output_t *output = outputs[i];
+		igt_crtc_t *crtc = igt_output_get_driving_crtc(output);
+
+		if (post_suspend)
+			igt_require_f(crtc,
+				      "POST-SUSPEND: no driving CRTC for %s (topology changed?)\n",
+				      output->name);
+		else
+			igt_assert_f(crtc,
+				     "PRE-SUSPEND: no driving CRTC for %s (bad pipe assignment?)\n",
+				     output->name);
+
+		collect_single_crc(crtc, &crcs[i]);
+	}
+}
+
+static void wait_for_vblanks(igt_output_t **outputs, int num_outputs,
+			     bool post_suspend)
+{
+	int i;
+
+	for (i = 0; i < num_outputs; i++) {
+		igt_crtc_t *crtc = igt_output_get_driving_crtc(outputs[i]);
+
+		if (post_suspend)
+			igt_require_f(crtc,
+				      "POST-SUSPEND: no driving CRTC for %s during vblank wait (topology changed?)\n",
+				      outputs[i]->name);
+		else
+			igt_assert_f(crtc,
+				     "PRE-SUSPEND: no driving CRTC for %s during vblank wait (bad pipe assignment?)\n",
+				     outputs[i]->name);
+
+		igt_wait_for_vblank(crtc);
+	}
+}
+
+static void log_crc_for_outputs(igt_output_t **outputs, int num_outputs,
+				igt_crc_t *crcs, const char *stage)
+{
+	int i;
+
+	for (i = 0; i < num_outputs; i++) {
+		igt_output_t *o = outputs[i];
+		drmModeModeInfo *m = igt_output_get_mode(o);
+		char *s = igt_crc_to_string(&crcs[i]);
+		igt_crtc_t *crtc = igt_output_get_driving_crtc(o);
+
+		igt_debug("[%d] %s: output %s -> crtc %s, CRC %s, mode %dx%d@%d\n",
+			  i, stage, o->name,
+			  igt_crtc_name(crtc),
+			  s,
+			  m ? m->hdisplay : -1,
+			  m ? m->vdisplay : -1,
+			  m ? m->vrefresh : 0);
+		free(s);
+	}
+}
+
+static void select_non_joiner_modes(int drm_fd, igt_output_t **outputs,
+				    int num_outputs)
+{
+	int max_dotclock = igt_get_max_dotclock(drm_fd);
+	int i;
+
+	if (max_dotclock <= 0)
+		max_dotclock = INT_MAX;
+
+	for (i = 0; i < num_outputs; i++) {
+		igt_output_t *output = outputs[i];
+		drmModeModeInfo non_joiner_mode;
+
+		igt_require_f(max_non_joiner_mode_found(drm_fd,
+							output->config.connector,
+							max_dotclock,
+							&non_joiner_mode),
+			      "No non-joiner mode found for %s\n",
+			      output->name);
+		igt_output_override_mode(output, &non_joiner_mode);
+	}
+}
+
+static void create_fbs_for_outputs(int drm_fd, igt_output_t **outputs,
+				   int num_outputs, struct igt_fb *fbs)
+{
+	int i;
+
+	for (i = 0; i < num_outputs; i++) {
+		igt_output_t *output = outputs[i];
+		drmModeModeInfo *mode = igt_output_get_mode(output);
+		igt_plane_t *primary;
+
+		igt_require_f(mode, "No mode available for output %s\n", output->name);
+
+		primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
+
+		igt_create_color_fb(drm_fd,
+				    mode->hdisplay, mode->vdisplay,
+				    DRM_FORMAT_XRGB8888,
+				    DRM_FORMAT_MOD_LINEAR,
+				    0.0, 1.0, 0.0,
+				    &fbs[i]);
+		igt_plane_set_fb(primary, &fbs[i]);
+	}
+}
+
+static void run_mst_subset_and_verify(igt_display_t *display,
+				      igt_output_t **active_outputs,
+				      int num_active,
+				      int n_crtcs,
+				      uint32_t master_pipes_mask,
+				      uint32_t valid_pipes_mask)
+{
+	igt_crc_t pre_crcs[MAX_MST_OUTPUT];
+	igt_crc_t post_crcs[MAX_MST_OUTPUT];
+	struct igt_fb fbs[MAX_MST_OUTPUT];
+	uint32_t used_pipes_mask = 0;
+	enum igt_suspend_test stest = SUSPEND_TEST_NONE;
+	int drm_fd = display->drm_fd;
+	int i;
+
+	igt_require_f(num_active <= n_crtcs,
+		      "Not enough crtcs for MST subset\n");
+
+	igt_require(igt_assign_pipes_for_outputs(drm_fd,
+						 active_outputs,
+						 num_active,
+						 n_crtcs,
+						 &used_pipes_mask,
+						 master_pipes_mask,
+						 valid_pipes_mask));
+
+	select_non_joiner_modes(drm_fd, active_outputs, num_active);
+
+	igt_require_f(igt_fit_modes_in_bw(display),
+		      "Unable to fit modes in bw\n");
+
+	create_fbs_for_outputs(drm_fd, active_outputs, num_active, fbs);
+
+	igt_display_commit2(display, COMMIT_ATOMIC);
+
+	/* rtcwake cmd is not supported on MTK devices */
+	if (is_mtk_device(drm_fd))
+		stest = SUSPEND_TEST_DEVICES;
+
+	igt_info("MST subset: %d outputs, n_crtcs=%d\n",
+		 num_active, n_crtcs);
+
+	wait_for_vblanks(active_outputs, num_active, false);
+
+	collect_crc_for_active_outputs(active_outputs,
+				       num_active,
+				       pre_crcs, false);
+
+	log_crc_for_outputs(active_outputs, num_active, pre_crcs, "PRE-SUSPEND");
+
+	igt_system_suspend_autoresume(SUSPEND_STATE_MEM, stest);
+
+	wait_for_vblanks(active_outputs, num_active, true);
+
+	collect_crc_for_active_outputs(active_outputs,
+				       num_active,
+				       post_crcs, true);
+
+	log_crc_for_outputs(active_outputs, num_active, post_crcs, "POST-SUSPEND");
+
+	for (i = 0; i < num_active; i++)
+		igt_assert_crc_equal(&pre_crcs[i], &post_crcs[i]);
+
+	/* Detach FBs from planes and remove them to leave a clean state */
+	for (i = 0; i < num_active; i++) {
+		igt_plane_t *primary =
+			igt_output_get_plane_type(active_outputs[i],
+						  DRM_PLANE_TYPE_PRIMARY);
+		igt_plane_set_fb(primary, NULL);
+		igt_remove_fb(drm_fd, &fbs[i]);
+	}
+}
+
+static int discover_mst_roots(igt_display_t *display,
+			      struct mst_root_info *roots)
+{
+	igt_output_t *output;
+	int drm_fd = display->drm_fd;
+	int num_roots = 0;
+	int ret, i;
+
+	for_each_connected_output(display, output) {
+		bool root_seen = false;
+		int root_id;
+
+		root_id = igt_get_dp_mst_connector_id(output);
+		if (root_id < 0)
+			continue;
+
+		for (i = 0; i < num_roots; i++)
+			if (roots[i].root_id == root_id)
+				root_seen = true;
+
+		if (root_seen)
+			continue;
+
+		if (num_roots >= IGT_MAX_PIPES)
+			break;
+
+		roots[num_roots].root_id = root_id;
+		roots[num_roots].num_mst = 0;
+		ret = igt_find_all_mst_output_in_topology(drm_fd,
+							  display, output,
+							  roots[num_roots].mst_outputs,
+							  &roots[num_roots].num_mst);
+		igt_require(ret == 0);
+
+		if (roots[num_roots].num_mst == 0)
+			continue;
+
+		if (roots[num_roots].num_mst > MAX_MST_OUTPUT)
+			roots[num_roots].num_mst = MAX_MST_OUTPUT;
+
+		num_roots++;
+	}
+
+	return num_roots;
+}
+
+static void mst_suspend_read_crc(igt_display_t *display)
+{
+	struct mst_root_info roots[IGT_MAX_PIPES];
+	igt_output_t *active_outputs[MAX_MST_OUTPUT];
+	uint32_t valid_pipes_mask = 0;
+	uint32_t master_pipes_mask;
+	int n_crtcs = igt_display_n_crtcs(display);
+	int num_roots, num_active, i;
+	igt_crtc_t *crtc;
+
+	for_each_crtc(display, crtc)
+		valid_pipes_mask |= BIT(crtc->pipe);
+
+	igt_set_all_master_pipes_for_platform(display, &master_pipes_mask);
+
+	num_roots = discover_mst_roots(display, roots);
+	igt_require_f(num_roots > 0, "No MST roots found\n");
+
+	for (i = 0; i < num_roots; i++) {
+		igt_dynamic_f("mst-root-%d", roots[i].root_id) {
+			int mask;
+
+			for (mask = 1; mask < (1 << roots[i].num_mst); mask++) {
+				int bit, idx = 0;
+
+				for (bit = 0; bit < roots[i].num_mst; bit++) {
+					if (!(mask & (1 << bit)))
+						continue;
+
+					if (idx >= MAX_MST_OUTPUT)
+						break;
+
+					active_outputs[idx++] =
+						roots[i].mst_outputs[bit];
+				}
+
+				num_active = idx;
+				if (!num_active)
+					continue;
+
+				igt_display_reset(display);
+
+				run_mst_subset_and_verify(display,
+							  active_outputs,
+							  num_active,
+							  n_crtcs,
+							  master_pipes_mask,
+							  valid_pipes_mask);
+			}
+		}
+	}
+}
+
  static bool simulation_constraint(igt_crtc_t *crtc)
  {
  	if (igt_run_in_simulation() && !extended &&
@@ -525,6 +837,12 @@ int igt_main_args("e", NULL, help_str, opt_handler, NULL)
  		}
  	}
 
+	igt_describe("MST suspend test for pipe CRC reads.");
+	igt_subtest_with_dynamic("mst-suspend-read-crc") {
+		igt_require(igt_display_has_mst_output(&data.display));
+		mst_suspend_read_crc(&data.display);
+	}
+
  	igt_fixture() {
  		igt_display_fini(&data.display);
  		drm_close_driver(data.drm_fd);
tests/meson.build +3 -0
index cecb4a8ae..a1e42755e 100644
@@ -402,6 +402,9 @@ extra_sources = {
             join_paths ('intel', 'kms_joiner_helper.c') ],
  	'kms_dsc': [ join_paths ('intel', 'kms_dsc_helper.c') ],
  	'kms_joiner': [ join_paths ('intel', 'kms_joiner_helper.c') ],
+	'kms_pipe_crc_basic': [
+           join_paths ('intel', 'kms_mst_helper.c'),
+           join_paths ('intel', 'kms_joiner_helper.c') ],
  	'kms_psr2_sf':  [ join_paths ('intel', 'kms_dsc_helper.c') ],
  }
#13 lore raw

Re: [PATCH i-g-t 6/6] tests/kms_pipe_crc_basic: Add MST suspend-resume test

In reply to Jani Nikula
Quoted 13 lines · Jani Nikula
Quoted 11 lines · Kunal Joshi

Add a new subtest mst-suspend-read-crc that verifies MST outputs preserve display content (via CRC comparison) across S3 suspend/resume.

The test enumerates all connected DP MST topologies, and for each root connector exercises all non-empty subsets of the discovered MST outputs. For each subset it:
- Assigns pipes and selects non-joiner modes
- Fits modes within bandwidth constraints
- Creates green FBs, commits, and collects pre-suspend CRCs
- Suspends to memory and resumes
- Collects post-suspend CRCs and asserts they match

Quoted 2 lines

tests/kms_pipe_crc_basic.c is supposed to be the basic CRC test. Adding MST to it is fine, I guess,

I don't understand even the MST part. What does the "MST vs. not" have to do verifying that pipe CRCs work?

Maybe the intention here is the opposite? As in verify that MST suspend/resume works, and implement that by *using* pipe CRCs. In that case this whole thing should be a completely different test and not shoehorned into kms_pipe_crc_basic.

Quoted 407 lines

but adding all the Intel specific joiner
stuff here seems questionable.

IMO basically anything that needs to know anything about the concept of "pipes" (as opposed to CRTCs and CRTC indexes) should be inside tests/intel or minimized within checks for Intel devices.

BR,
Jani.

Quoted 393 lines

v2:
- Add error handling for igt_pipe_crc_new (Thasleem)
- Improve log format with index for clarity (Thasleem)
- Order declarations in decreasing line length (Thasleem)
- Add print message when no MST found (Thasleem)
- Add bounds check for idx in subset loop (Thasleem)
- Use igt_crtc_crc_new() instead of igt_pipe_crc_new() (Ville)

v3:
- framebuffers missing in commit (Bilal)

v4:
- Drop cleanup framework

v5:
- Use igt_debug instead of igt_info for CRC logging (Thasleem)
- Remove comments (Suraj)
- Remove double vblank waits before/after suspend (Suraj)
- Rename variable (Thasleem)
- Two-pass approach (Suraj)

---
 tests/kms_pipe_crc_basic.c | 318 +++++++++++++++++++++++++++++++++++++
 tests/meson.build          |   3 +
 2 files changed, 321 insertions(+)
tests/kms_pipe_crc_basic.c +318 -0
index 42e141545..d8369807e 100644
@@ -32,7 +32,10 @@
 
 #include "igt.h"
 #include "igt_sysfs.h"
+#include "intel/kms_mst_helper.h"
+#include "intel/kms_joiner_helper.h"
 #include <errno.h>
+#include <limits.h>
 #include <stdbool.h>
 #include <stdio.h>
 #include <string.h>
@@ -77,6 +80,11 @@
  *              CRTC does not cause issues.
  */
 
+/**
+ * SUBTEST: mst-suspend-read-crc
+ * Description: MST suspend test for pipe CRC reads.
+ */
+
 static bool extended;
 static int active_crtcs[IGT_MAX_PIPES];
 static uint32_t last_crtc_index;
@@ -96,6 +104,310 @@ static struct {
 	{ .r = 0.0, .g = 1.0, .b = 1.0 },
 };
 
+#define MAX_MST_OUTPUT	3
+
+struct mst_root_info {
+	int root_id;
+	igt_output_t *mst_outputs[IGT_MAX_PIPES];
+	int num_mst;
+};
+
+static void collect_single_crc(igt_crtc_t *crtc, igt_crc_t *crc)
+{
+	igt_pipe_crc_t *pipe_crc;
+
+	pipe_crc = igt_crtc_crc_new(crtc, IGT_PIPE_CRC_SOURCE_AUTO);
+	igt_assert(pipe_crc);
+	igt_pipe_crc_collect_crc(pipe_crc, crc);
+	igt_pipe_crc_free(pipe_crc);
+}
+
+static void collect_crc_for_active_outputs(igt_output_t **outputs,
+					   int num_outputs,
+					   igt_crc_t *crcs,
+					   bool post_suspend)
+{
+	int i;
+
+	for (i = 0; i < num_outputs; i++) {
+		igt_output_t *output = outputs[i];
+		igt_crtc_t *crtc = igt_output_get_driving_crtc(output);
+
+		if (post_suspend)
+			igt_require_f(crtc,
+				      "POST-SUSPEND: no driving CRTC for %s (topology changed?)\n",
+				      output->name);
+		else
+			igt_assert_f(crtc,
+				     "PRE-SUSPEND: no driving CRTC for %s (bad pipe assignment?)\n",
+				     output->name);
+
+		collect_single_crc(crtc, &crcs[i]);
+	}
+}
+
+static void wait_for_vblanks(igt_output_t **outputs, int num_outputs,
+			     bool post_suspend)
+{
+	int i;
+
+	for (i = 0; i < num_outputs; i++) {
+		igt_crtc_t *crtc = igt_output_get_driving_crtc(outputs[i]);
+
+		if (post_suspend)
+			igt_require_f(crtc,
+				      "POST-SUSPEND: no driving CRTC for %s during vblank wait (topology changed?)\n",
+				      outputs[i]->name);
+		else
+			igt_assert_f(crtc,
+				     "PRE-SUSPEND: no driving CRTC for %s during vblank wait (bad pipe assignment?)\n",
+				     outputs[i]->name);
+
+		igt_wait_for_vblank(crtc);
+	}
+}
+
+static void log_crc_for_outputs(igt_output_t **outputs, int num_outputs,
+				igt_crc_t *crcs, const char *stage)
+{
+	int i;
+
+	for (i = 0; i < num_outputs; i++) {
+		igt_output_t *o = outputs[i];
+		drmModeModeInfo *m = igt_output_get_mode(o);
+		char *s = igt_crc_to_string(&crcs[i]);
+		igt_crtc_t *crtc = igt_output_get_driving_crtc(o);
+
+		igt_debug("[%d] %s: output %s -> crtc %s, CRC %s, mode %dx%d@%d\n",
+			  i, stage, o->name,
+			  igt_crtc_name(crtc),
+			  s,
+			  m ? m->hdisplay : -1,
+			  m ? m->vdisplay : -1,
+			  m ? m->vrefresh : 0);
+		free(s);
+	}
+}
+
+static void select_non_joiner_modes(int drm_fd, igt_output_t **outputs,
+				    int num_outputs)
+{
+	int max_dotclock = igt_get_max_dotclock(drm_fd);
+	int i;
+
+	if (max_dotclock <= 0)
+		max_dotclock = INT_MAX;
+
+	for (i = 0; i < num_outputs; i++) {
+		igt_output_t *output = outputs[i];
+		drmModeModeInfo non_joiner_mode;
+
+		igt_require_f(max_non_joiner_mode_found(drm_fd,
+							output->config.connector,
+							max_dotclock,
+							&non_joiner_mode),
+			      "No non-joiner mode found for %s\n",
+			      output->name);
+		igt_output_override_mode(output, &non_joiner_mode);
+	}
+}
+
+static void create_fbs_for_outputs(int drm_fd, igt_output_t **outputs,
+				   int num_outputs, struct igt_fb *fbs)
+{
+	int i;
+
+	for (i = 0; i < num_outputs; i++) {
+		igt_output_t *output = outputs[i];
+		drmModeModeInfo *mode = igt_output_get_mode(output);
+		igt_plane_t *primary;
+
+		igt_require_f(mode, "No mode available for output %s\n", output->name);
+
+		primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
+
+		igt_create_color_fb(drm_fd,
+				    mode->hdisplay, mode->vdisplay,
+				    DRM_FORMAT_XRGB8888,
+				    DRM_FORMAT_MOD_LINEAR,
+				    0.0, 1.0, 0.0,
+				    &fbs[i]);
+		igt_plane_set_fb(primary, &fbs[i]);
+	}
+}
+
+static void run_mst_subset_and_verify(igt_display_t *display,
+				      igt_output_t **active_outputs,
+				      int num_active,
+				      int n_crtcs,
+				      uint32_t master_pipes_mask,
+				      uint32_t valid_pipes_mask)
+{
+	igt_crc_t pre_crcs[MAX_MST_OUTPUT];
+	igt_crc_t post_crcs[MAX_MST_OUTPUT];
+	struct igt_fb fbs[MAX_MST_OUTPUT];
+	uint32_t used_pipes_mask = 0;
+	enum igt_suspend_test stest = SUSPEND_TEST_NONE;
+	int drm_fd = display->drm_fd;
+	int i;
+
+	igt_require_f(num_active <= n_crtcs,
+		      "Not enough crtcs for MST subset\n");
+
+	igt_require(igt_assign_pipes_for_outputs(drm_fd,
+						 active_outputs,
+						 num_active,
+						 n_crtcs,
+						 &used_pipes_mask,
+						 master_pipes_mask,
+						 valid_pipes_mask));
+
+	select_non_joiner_modes(drm_fd, active_outputs, num_active);
+
+	igt_require_f(igt_fit_modes_in_bw(display),
+		      "Unable to fit modes in bw\n");
+
+	create_fbs_for_outputs(drm_fd, active_outputs, num_active, fbs);
+
+	igt_display_commit2(display, COMMIT_ATOMIC);
+
+	/* rtcwake cmd is not supported on MTK devices */
+	if (is_mtk_device(drm_fd))
+		stest = SUSPEND_TEST_DEVICES;
+
+	igt_info("MST subset: %d outputs, n_crtcs=%d\n",
+		 num_active, n_crtcs);
+
+	wait_for_vblanks(active_outputs, num_active, false);
+
+	collect_crc_for_active_outputs(active_outputs,
+				       num_active,
+				       pre_crcs, false);
+
+	log_crc_for_outputs(active_outputs, num_active, pre_crcs, "PRE-SUSPEND");
+
+	igt_system_suspend_autoresume(SUSPEND_STATE_MEM, stest);
+
+	wait_for_vblanks(active_outputs, num_active, true);
+
+	collect_crc_for_active_outputs(active_outputs,
+				       num_active,
+				       post_crcs, true);
+
+	log_crc_for_outputs(active_outputs, num_active, post_crcs, "POST-SUSPEND");
+
+	for (i = 0; i < num_active; i++)
+		igt_assert_crc_equal(&pre_crcs[i], &post_crcs[i]);
+
+	/* Detach FBs from planes and remove them to leave a clean state */
+	for (i = 0; i < num_active; i++) {
+		igt_plane_t *primary =
+			igt_output_get_plane_type(active_outputs[i],
+						  DRM_PLANE_TYPE_PRIMARY);
+		igt_plane_set_fb(primary, NULL);
+		igt_remove_fb(drm_fd, &fbs[i]);
+	}
+}
+
+static int discover_mst_roots(igt_display_t *display,
+			      struct mst_root_info *roots)
+{
+	igt_output_t *output;
+	int drm_fd = display->drm_fd;
+	int num_roots = 0;
+	int ret, i;
+
+	for_each_connected_output(display, output) {
+		bool root_seen = false;
+		int root_id;
+
+		root_id = igt_get_dp_mst_connector_id(output);
+		if (root_id < 0)
+			continue;
+
+		for (i = 0; i < num_roots; i++)
+			if (roots[i].root_id == root_id)
+				root_seen = true;
+
+		if (root_seen)
+			continue;
+
+		if (num_roots >= IGT_MAX_PIPES)
+			break;
+
+		roots[num_roots].root_id = root_id;
+		roots[num_roots].num_mst = 0;
+		ret = igt_find_all_mst_output_in_topology(drm_fd,
+							  display, output,
+							  roots[num_roots].mst_outputs,
+							  &roots[num_roots].num_mst);
+		igt_require(ret == 0);
+
+		if (roots[num_roots].num_mst == 0)
+			continue;
+
+		if (roots[num_roots].num_mst > MAX_MST_OUTPUT)
+			roots[num_roots].num_mst = MAX_MST_OUTPUT;
+
+		num_roots++;
+	}
+
+	return num_roots;
+}
+
+static void mst_suspend_read_crc(igt_display_t *display)
+{
+	struct mst_root_info roots[IGT_MAX_PIPES];
+	igt_output_t *active_outputs[MAX_MST_OUTPUT];
+	uint32_t valid_pipes_mask = 0;
+	uint32_t master_pipes_mask;
+	int n_crtcs = igt_display_n_crtcs(display);
+	int num_roots, num_active, i;
+	igt_crtc_t *crtc;
+
+	for_each_crtc(display, crtc)
+		valid_pipes_mask |= BIT(crtc->pipe);
+
+	igt_set_all_master_pipes_for_platform(display, &master_pipes_mask);
+
+	num_roots = discover_mst_roots(display, roots);
+	igt_require_f(num_roots > 0, "No MST roots found\n");
+
+	for (i = 0; i < num_roots; i++) {
+		igt_dynamic_f("mst-root-%d", roots[i].root_id) {
+			int mask;
+
+			for (mask = 1; mask < (1 << roots[i].num_mst); mask++) {
+				int bit, idx = 0;
+
+				for (bit = 0; bit < roots[i].num_mst; bit++) {
+					if (!(mask & (1 << bit)))
+						continue;
+
+					if (idx >= MAX_MST_OUTPUT)
+						break;
+
+					active_outputs[idx++] =
+						roots[i].mst_outputs[bit];
+				}
+
+				num_active = idx;
+				if (!num_active)
+					continue;
+
+				igt_display_reset(display);
+
+				run_mst_subset_and_verify(display,
+							  active_outputs,
+							  num_active,
+							  n_crtcs,
+							  master_pipes_mask,
+							  valid_pipes_mask);
+			}
+		}
+	}
+}
+
 static bool simulation_constraint(igt_crtc_t *crtc)
 {
 	if (igt_run_in_simulation() && !extended &&
@@ -525,6 +837,12 @@ int igt_main_args("e", NULL, help_str, opt_handler, NULL)
 		}
 	}
 
+	igt_describe("MST suspend test for pipe CRC reads.");
+	igt_subtest_with_dynamic("mst-suspend-read-crc") {
+		igt_require(igt_display_has_mst_output(&data.display));
+		mst_suspend_read_crc(&data.display);
+	}
+
 	igt_fixture() {
 		igt_display_fini(&data.display);
 		drm_close_driver(data.drm_fd);
tests/meson.build +3 -0
index cecb4a8ae..a1e42755e 100644
@@ -402,6 +402,9 @@ extra_sources = {
            join_paths ('intel', 'kms_joiner_helper.c') ],
 	'kms_dsc': [ join_paths ('intel', 'kms_dsc_helper.c') ],
 	'kms_joiner': [ join_paths ('intel', 'kms_joiner_helper.c') ],
+	'kms_pipe_crc_basic': [
+           join_paths ('intel', 'kms_mst_helper.c'),
+           join_paths ('intel', 'kms_joiner_helper.c') ],
 	'kms_psr2_sf':  [ join_paths ('intel', 'kms_dsc_helper.c') ],
 }
Signature · 1 line
Jani Nikula, Intel
Signature · 2 lines
Ville Syrjälä
Intel
#14 lore raw

Re: [PATCH i-g-t 6/6] tests/kms_pipe_crc_basic: Add MST suspend-resume test

Hello Ville,

Quoted 15 lines · Ville Syrjälä
Quoted 12 lines · Jani Nikula
Quoted 11 lines · Kunal Joshi

Add a new subtest mst-suspend-read-crc that verifies MST outputs preserve display content (via CRC comparison) across S3 suspend/resume.

The test enumerates all connected DP MST topologies, and for each root connector exercises all non-empty subsets of the discovered MST outputs. For each subset it:
- Assigns pipes and selects non-joiner modes
- Fits modes within bandwidth constraints
- Creates green FBs, commits, and collects pre-suspend CRCs
- Suspends to memory and resumes
- Collects post-suspend CRCs and asserts they match

Quoted 2 lines

tests/kms_pipe_crc_basic.c is supposed to be the basic CRC test. Adding MST to it is fine, I guess,

Quoted 7 lines

I don't understand even the MST part. What does the "MST vs. not" have to do verifying that pipe CRCs work?

Maybe the intention here is the opposite? As in verify that MST suspend/resume works, and implement that by *using* pipe CRCs. In that case this whole thing should be a completely different test and not shoehorned into kms_pipe_crc_basic.

Yes, that is the intent: validate MST suspend/resume and use pipe CRC as the correctness check. I agree this does not fit well within kms_pipe_crc_basic, since CRC is only incidental here and MST suspend/resume is the real feature under test. I’ll split this out into a separate test.

Thanks and Regards
Kunal Joshi

Quoted 405 lines
Quoted 405 lines

but adding all the Intel specific joiner
stuff here seems questionable.

IMO basically anything that needs to know anything about the concept of "pipes" (as opposed to CRTCs and CRTC indexes) should be inside tests/intel or minimized within checks for Intel devices.

BR,
Jani.

Quoted 392 lines

v2:
- Add error handling for igt_pipe_crc_new (Thasleem)
- Improve log format with index for clarity (Thasleem)
- Order declarations in decreasing line length (Thasleem)
- Add print message when no MST found (Thasleem)
- Add bounds check for idx in subset loop (Thasleem)
- Use igt_crtc_crc_new() instead of igt_pipe_crc_new() (Ville)

v3:
- framebuffers missing in commit (Bilal)

v4:
- Drop cleanup framework

v5:
- Use igt_debug instead of igt_info for CRC logging (Thasleem)
- Remove comments (Suraj)
- Remove double vblank waits before/after suspend (Suraj)
- Rename variable (Thasleem)
- Two-pass approach (Suraj)

---
  tests/kms_pipe_crc_basic.c | 318 +++++++++++++++++++++++++++++++++++++
  tests/meson.build          |   3 +
  2 files changed, 321 insertions(+)
tests/kms_pipe_crc_basic.c +318 -0
index 42e141545..d8369807e 100644
@@ -32,7 +32,10 @@
 
  #include "igt.h"
  #include "igt_sysfs.h"
+#include "intel/kms_mst_helper.h"
+#include "intel/kms_joiner_helper.h"
  #include <errno.h>
+#include <limits.h>
  #include <stdbool.h>
  #include <stdio.h>
  #include <string.h>
@@ -77,6 +80,11 @@
   *              CRTC does not cause issues.
   */
 
+/**
+ * SUBTEST: mst-suspend-read-crc
+ * Description: MST suspend test for pipe CRC reads.
+ */
+
  static bool extended;
  static int active_crtcs[IGT_MAX_PIPES];
  static uint32_t last_crtc_index;
@@ -96,6 +104,310 @@ static struct {
  	{ .r = 0.0, .g = 1.0, .b = 1.0 },
  };
 
+#define MAX_MST_OUTPUT	3
+
+struct mst_root_info {
+	int root_id;
+	igt_output_t *mst_outputs[IGT_MAX_PIPES];
+	int num_mst;
+};
+
+static void collect_single_crc(igt_crtc_t *crtc, igt_crc_t *crc)
+{
+	igt_pipe_crc_t *pipe_crc;
+
+	pipe_crc = igt_crtc_crc_new(crtc, IGT_PIPE_CRC_SOURCE_AUTO);
+	igt_assert(pipe_crc);
+	igt_pipe_crc_collect_crc(pipe_crc, crc);
+	igt_pipe_crc_free(pipe_crc);
+}
+
+static void collect_crc_for_active_outputs(igt_output_t **outputs,
+					   int num_outputs,
+					   igt_crc_t *crcs,
+					   bool post_suspend)
+{
+	int i;
+
+	for (i = 0; i < num_outputs; i++) {
+		igt_output_t *output = outputs[i];
+		igt_crtc_t *crtc = igt_output_get_driving_crtc(output);
+
+		if (post_suspend)
+			igt_require_f(crtc,
+				      "POST-SUSPEND: no driving CRTC for %s (topology changed?)\n",
+				      output->name);
+		else
+			igt_assert_f(crtc,
+				     "PRE-SUSPEND: no driving CRTC for %s (bad pipe assignment?)\n",
+				     output->name);
+
+		collect_single_crc(crtc, &crcs[i]);
+	}
+}
+
+static void wait_for_vblanks(igt_output_t **outputs, int num_outputs,
+			     bool post_suspend)
+{
+	int i;
+
+	for (i = 0; i < num_outputs; i++) {
+		igt_crtc_t *crtc = igt_output_get_driving_crtc(outputs[i]);
+
+		if (post_suspend)
+			igt_require_f(crtc,
+				      "POST-SUSPEND: no driving CRTC for %s during vblank wait (topology changed?)\n",
+				      outputs[i]->name);
+		else
+			igt_assert_f(crtc,
+				     "PRE-SUSPEND: no driving CRTC for %s during vblank wait (bad pipe assignment?)\n",
+				     outputs[i]->name);
+
+		igt_wait_for_vblank(crtc);
+	}
+}
+
+static void log_crc_for_outputs(igt_output_t **outputs, int num_outputs,
+				igt_crc_t *crcs, const char *stage)
+{
+	int i;
+
+	for (i = 0; i < num_outputs; i++) {
+		igt_output_t *o = outputs[i];
+		drmModeModeInfo *m = igt_output_get_mode(o);
+		char *s = igt_crc_to_string(&crcs[i]);
+		igt_crtc_t *crtc = igt_output_get_driving_crtc(o);
+
+		igt_debug("[%d] %s: output %s -> crtc %s, CRC %s, mode %dx%d@%d\n",
+			  i, stage, o->name,
+			  igt_crtc_name(crtc),
+			  s,
+			  m ? m->hdisplay : -1,
+			  m ? m->vdisplay : -1,
+			  m ? m->vrefresh : 0);
+		free(s);
+	}
+}
+
+static void select_non_joiner_modes(int drm_fd, igt_output_t **outputs,
+				    int num_outputs)
+{
+	int max_dotclock = igt_get_max_dotclock(drm_fd);
+	int i;
+
+	if (max_dotclock <= 0)
+		max_dotclock = INT_MAX;
+
+	for (i = 0; i < num_outputs; i++) {
+		igt_output_t *output = outputs[i];
+		drmModeModeInfo non_joiner_mode;
+
+		igt_require_f(max_non_joiner_mode_found(drm_fd,
+							output->config.connector,
+							max_dotclock,
+							&non_joiner_mode),
+			      "No non-joiner mode found for %s\n",
+			      output->name);
+		igt_output_override_mode(output, &non_joiner_mode);
+	}
+}
+
+static void create_fbs_for_outputs(int drm_fd, igt_output_t **outputs,
+				   int num_outputs, struct igt_fb *fbs)
+{
+	int i;
+
+	for (i = 0; i < num_outputs; i++) {
+		igt_output_t *output = outputs[i];
+		drmModeModeInfo *mode = igt_output_get_mode(output);
+		igt_plane_t *primary;
+
+		igt_require_f(mode, "No mode available for output %s\n", output->name);
+
+		primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
+
+		igt_create_color_fb(drm_fd,
+				    mode->hdisplay, mode->vdisplay,
+				    DRM_FORMAT_XRGB8888,
+				    DRM_FORMAT_MOD_LINEAR,
+				    0.0, 1.0, 0.0,
+				    &fbs[i]);
+		igt_plane_set_fb(primary, &fbs[i]);
+	}
+}
+
+static void run_mst_subset_and_verify(igt_display_t *display,
+				      igt_output_t **active_outputs,
+				      int num_active,
+				      int n_crtcs,
+				      uint32_t master_pipes_mask,
+				      uint32_t valid_pipes_mask)
+{
+	igt_crc_t pre_crcs[MAX_MST_OUTPUT];
+	igt_crc_t post_crcs[MAX_MST_OUTPUT];
+	struct igt_fb fbs[MAX_MST_OUTPUT];
+	uint32_t used_pipes_mask = 0;
+	enum igt_suspend_test stest = SUSPEND_TEST_NONE;
+	int drm_fd = display->drm_fd;
+	int i;
+
+	igt_require_f(num_active <= n_crtcs,
+		      "Not enough crtcs for MST subset\n");
+
+	igt_require(igt_assign_pipes_for_outputs(drm_fd,
+						 active_outputs,
+						 num_active,
+						 n_crtcs,
+						 &used_pipes_mask,
+						 master_pipes_mask,
+						 valid_pipes_mask));
+
+	select_non_joiner_modes(drm_fd, active_outputs, num_active);
+
+	igt_require_f(igt_fit_modes_in_bw(display),
+		      "Unable to fit modes in bw\n");
+
+	create_fbs_for_outputs(drm_fd, active_outputs, num_active, fbs);
+
+	igt_display_commit2(display, COMMIT_ATOMIC);
+
+	/* rtcwake cmd is not supported on MTK devices */
+	if (is_mtk_device(drm_fd))
+		stest = SUSPEND_TEST_DEVICES;
+
+	igt_info("MST subset: %d outputs, n_crtcs=%d\n",
+		 num_active, n_crtcs);
+
+	wait_for_vblanks(active_outputs, num_active, false);
+
+	collect_crc_for_active_outputs(active_outputs,
+				       num_active,
+				       pre_crcs, false);
+
+	log_crc_for_outputs(active_outputs, num_active, pre_crcs, "PRE-SUSPEND");
+
+	igt_system_suspend_autoresume(SUSPEND_STATE_MEM, stest);
+
+	wait_for_vblanks(active_outputs, num_active, true);
+
+	collect_crc_for_active_outputs(active_outputs,
+				       num_active,
+				       post_crcs, true);
+
+	log_crc_for_outputs(active_outputs, num_active, post_crcs, "POST-SUSPEND");
+
+	for (i = 0; i < num_active; i++)
+		igt_assert_crc_equal(&pre_crcs[i], &post_crcs[i]);
+
+	/* Detach FBs from planes and remove them to leave a clean state */
+	for (i = 0; i < num_active; i++) {
+		igt_plane_t *primary =
+			igt_output_get_plane_type(active_outputs[i],
+						  DRM_PLANE_TYPE_PRIMARY);
+		igt_plane_set_fb(primary, NULL);
+		igt_remove_fb(drm_fd, &fbs[i]);
+	}
+}
+
+static int discover_mst_roots(igt_display_t *display,
+			      struct mst_root_info *roots)
+{
+	igt_output_t *output;
+	int drm_fd = display->drm_fd;
+	int num_roots = 0;
+	int ret, i;
+
+	for_each_connected_output(display, output) {
+		bool root_seen = false;
+		int root_id;
+
+		root_id = igt_get_dp_mst_connector_id(output);
+		if (root_id < 0)
+			continue;
+
+		for (i = 0; i < num_roots; i++)
+			if (roots[i].root_id == root_id)
+				root_seen = true;
+
+		if (root_seen)
+			continue;
+
+		if (num_roots >= IGT_MAX_PIPES)
+			break;
+
+		roots[num_roots].root_id = root_id;
+		roots[num_roots].num_mst = 0;
+		ret = igt_find_all_mst_output_in_topology(drm_fd,
+							  display, output,
+							  roots[num_roots].mst_outputs,
+							  &roots[num_roots].num_mst);
+		igt_require(ret == 0);
+
+		if (roots[num_roots].num_mst == 0)
+			continue;
+
+		if (roots[num_roots].num_mst > MAX_MST_OUTPUT)
+			roots[num_roots].num_mst = MAX_MST_OUTPUT;
+
+		num_roots++;
+	}
+
+	return num_roots;
+}
+
+static void mst_suspend_read_crc(igt_display_t *display)
+{
+	struct mst_root_info roots[IGT_MAX_PIPES];
+	igt_output_t *active_outputs[MAX_MST_OUTPUT];
+	uint32_t valid_pipes_mask = 0;
+	uint32_t master_pipes_mask;
+	int n_crtcs = igt_display_n_crtcs(display);
+	int num_roots, num_active, i;
+	igt_crtc_t *crtc;
+
+	for_each_crtc(display, crtc)
+		valid_pipes_mask |= BIT(crtc->pipe);
+
+	igt_set_all_master_pipes_for_platform(display, &master_pipes_mask);
+
+	num_roots = discover_mst_roots(display, roots);
+	igt_require_f(num_roots > 0, "No MST roots found\n");
+
+	for (i = 0; i < num_roots; i++) {
+		igt_dynamic_f("mst-root-%d", roots[i].root_id) {
+			int mask;
+
+			for (mask = 1; mask < (1 << roots[i].num_mst); mask++) {
+				int bit, idx = 0;
+
+				for (bit = 0; bit < roots[i].num_mst; bit++) {
+					if (!(mask & (1 << bit)))
+						continue;
+
+					if (idx >= MAX_MST_OUTPUT)
+						break;
+
+					active_outputs[idx++] =
+						roots[i].mst_outputs[bit];
+				}
+
+				num_active = idx;
+				if (!num_active)
+					continue;
+
+				igt_display_reset(display);
+
+				run_mst_subset_and_verify(display,
+							  active_outputs,
+							  num_active,
+							  n_crtcs,
+							  master_pipes_mask,
+							  valid_pipes_mask);
+			}
+		}
+	}
+}
+
  static bool simulation_constraint(igt_crtc_t *crtc)
  {
  	if (igt_run_in_simulation() && !extended &&
@@ -525,6 +837,12 @@ int igt_main_args("e", NULL, help_str, opt_handler, NULL)
  		}
  	}
 
+	igt_describe("MST suspend test for pipe CRC reads.");
+	igt_subtest_with_dynamic("mst-suspend-read-crc") {
+		igt_require(igt_display_has_mst_output(&data.display));
+		mst_suspend_read_crc(&data.display);
+	}
+
  	igt_fixture() {
  		igt_display_fini(&data.display);
  		drm_close_driver(data.drm_fd);
tests/meson.build +3 -0
index cecb4a8ae..a1e42755e 100644
@@ -402,6 +402,9 @@ extra_sources = {
             join_paths ('intel', 'kms_joiner_helper.c') ],
  	'kms_dsc': [ join_paths ('intel', 'kms_dsc_helper.c') ],
  	'kms_joiner': [ join_paths ('intel', 'kms_joiner_helper.c') ],
+	'kms_pipe_crc_basic': [
+           join_paths ('intel', 'kms_mst_helper.c'),
+           join_paths ('intel', 'kms_joiner_helper.c') ],
  	'kms_psr2_sf':  [ join_paths ('intel', 'kms_dsc_helper.c') ],
  }
Signature · 1 line
Jani Nikula, Intel