USB: serial: option: add Telit Cinterion FN990A MBIM composition
Subsystems (3)
PATCH v2 1/1 USB: serial: option: add Telit Cinterion FN990A MBIM composition
Add the following Telit Cinterion FN990A MBIM composition:
0x1074: MBIM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (diag) +
DPL (Data Packet Logging) + adb
T: Bus=01 Lev=01 Prnt=04 Port=06 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1074 Rev=05.04 S: Manufacturer=Telit Wireless Solutions S: Product=FN990 S: SerialNumber=70628d0c C: #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
---
v2:
- Added "Cc: [email protected]"
- Link to v1: https://lore.kernel.org/linux-usb/[email protected]
drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/usb/serial/option.c +2 -0
@@ -1383,6 +1383,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(2) | RSVD(3) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1073, 0xff), /* Telit FN990A (ECM) */ .driver_info = NCTRL(0) | RSVD(1) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1074, 0xff), /* Telit FN990A (MBIM) */ + .driver_info = NCTRL(5) | RSVD(6) | RSVD(7) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1075, 0xff), /* Telit FN990A (PCIe) */ .driver_info = RSVD(0) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1077, 0xff), /* Telit FN990A (rmnet + audio) */
Signature · 1 line
2.53.0
Johan Hovold
maintainerQuoted 39 lines · Fabio Porcedda
Add the following Telit Cinterion FN990A MBIM composition:
0x1074: MBIM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (diag) +
DPL (Data Packet Logging) + adbT: Bus=01 Lev=01 Prnt=04 Port=06 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1074 Rev=05.04 S: Manufacturer=Telit Wireless Solutions S: Product=FN990 S: SerialNumber=70628d0c C: #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0msSigned-off-by Fabio Porcedda <[email protected]>
drivers/usb/serial/option.c static const struct usb_device_id option_ids[] = { · line 1387
Quoted 5 lines
drivers/usb/serial/option.c +2
-0@@ -1383,6 +1383,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(2) | RSVD(3) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1073, 0xff), /* Telit FN990A (ECM) */ .driver_info = NCTRL(0) | RSVD(1) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1074, 0xff), /* Telit FN990A (MBIM) */ + .driver_info = NCTRL(5) | RSVD(6) | RSVD(7) },
There is no adb interface in the usb-devices output in the commit message. Do you still need to reserve interface 7?
drivers/usb/serial/option.c static const struct usb_device_id option_ids[] = { · line 1390
Quoted 3 lines
drivers/usb/serial/option.c +0
-0{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1075, 0xff), /* Telit FN990A (PCIe) */ .driver_info = RSVD(0) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1077, 0xff), /* Telit FN990A (rmnet + audio) */
Johan
Quoted 40 lines · Johan Hovold
Quoted 37 lines · Fabio Porcedda
Add the following Telit Cinterion FN990A MBIM composition:
0x1074: MBIM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (diag) +
DPL (Data Packet Logging) + adbT: Bus=01 Lev=01 Prnt=04 Port=06 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1074 Rev=05.04 S: Manufacturer=Telit Wireless Solutions S: Product=FN990 S: SerialNumber=70628d0c C: #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0msSigned-off-by Fabio Porcedda <[email protected]>
Quoted 9 lines
drivers/usb/serial/option.c static const struct usb_device_id option_ids[] = { · line 1387
Quoted 6 lines
drivers/usb/serial/option.c +2
-0@@ -1383,6 +1383,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(2) | RSVD(3) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1073, 0xff), /* Telit FN990A (ECM) */ .driver_info = NCTRL(0) | RSVD(1) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1074, 0xff), /* Telit FN990A (MBIM) */ + .driver_info = NCTRL(5) | RSVD(6) | RSVD(7) },There is no adb interface in the usb-devices output in the commit message. Do you still need to reserve interface 7?
The output of usb-devices was not complete, I've sent a new version with the full output:
https://lore.kernel.org/linux-usb/[email protected]
Quoted 5 lines
drivers/usb/serial/option.c static const struct usb_device_id option_ids[] = { · line 1390
Quoted 3 lines
drivers/usb/serial/option.c +0
-0{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1075, 0xff), /* Telit FN990A (PCIe) */ .driver_info = RSVD(0) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1077, 0xff), /* Telit FN990A (rmnet + audio) */Johan
Thanks
Signature · 1 line
Fabio Porcedda