pynfs: a handful of fixes and a new CB_GETATTR test
Subsystems (2)
cover pynfs: a handful of fixes and a new CB_GETATTR test
Patches 1-4 are fixes/cleanups, but patch 3 might need a change (I removed the erroneous check, but we might want to replace it with something else).
Patch 5 simulates an actual application issue where the application is failing because it's getting a unexpected/surprise mtime update for a file that it's tracking.
Scott Mayhew (5):
pynfs: ensure tests clean up after themselves
pynfs: fix the check for delegated attribute support
pynfs: remove erroneous test from DELEG24 and DELEG25
pynfs: _testCbGetattr() should check the delegation that was received
pynfs: add delegation test for CB_GETATTR after sync WRITE
nfs4.1/server41tests/st_courtesy.py | 2 + nfs4.1/server41tests/st_delegation.py | 227 +++++++++++++++++++++++--- nfs4.1/server41tests/st_sparse.py | 10 +- 3 files changed, 215 insertions(+), 24 deletions(-)
Signature · 1 line
2.53.0
PATCH 1/5 pynfs: ensure tests clean up after themselves
I noticed my server was taking longer to exit grace on restart after running pynfs. The server was waiting for several clients (which have already gone away) to finish reclaim. You can observe the client ids using 'nfsdclddb print' while the server is in grace (or prior to reboot):
$ sudo nfsdclddb print Schema version: 4 current epoch: 47 recovery epoch: 46 Clients in current epoch: Clients in recovery epoch: id = COUR2_1774823970_2, princhash = (null) id = ALLOC1_1774823970, princhash = (null) id = ALLOC2_1774823970, princhash = (null) id = ALLOC3_1774823970, princhash = (null) id = DELEG9_1774823970_1, princhash = (null) id = DELEG9_1774823970_2, princhash = (null) id = DELEG2_1774823970_1, princhash = (null) id = DELEG23_1774823970_1, princhash = (null) id = DELEG1_1774823970_1, princhash = (null) id = DELEG4_1774823970_1, princhash = (null) id = DELEG8_1774823970_1, princhash = (null) id = DELEG8_1774823970_2, princhash = (null) id = DELEG25_1774823970_1, princhash = (null) id = DELEG24_1774823970_1, princhash = (null) id = DELEG6_1774823970_1, princhash = (null) id = DELEG7_1774823970_1, princhash = (null) id = DELEG5_1774823970_1, princhash = (null) id = DELEG3_1774823970_1, princhash = (null)
These tests were all failing to close some of their open files, causing DESTROY_CLIENTID at the end of the test to return NFS4ERR_CLIENTID_BUSY.
On older servers these client ids would stick around for 1 lease period. With the newer courteous server they may stick around indefinitely, so it's important for the tests to clean up after themselves.
--- nfs4.1/server41tests/st_courtesy.py | 2 + nfs4.1/server41tests/st_delegation.py | 59 +++++++++++++++++++++------ nfs4.1/server41tests/st_sparse.py | 10 ++++- 3 files changed, 58 insertions(+), 13 deletions(-)
nfs4.1/server41tests/st_courtesy.py +2 -0
@@ -84,6 +84,8 @@ def testLockSleepLock(t, env): res = sess2.compound(cour_lockargs(fh, stateid)) check(res, NFS4_OK) + close_file(sess2, fh, stateid=stateid) + def testShareReservation00(t, env): """Test OPEN file with OPEN4_SHARE_DENY_WRITE 1st client opens file with OPEN4_SHARE_DENY_WRITE
nfs4.1/server41tests/st_delegation.py +47 -12
178 lines not on this page · raw message
nfs4.1/server41tests/st_sparse.py +9 -1
@@ -1,6 +1,6 @@ from .st_create_session import create_session from xdrdef.nfs4_const import * -from .environment import check, fail, create_file +from .environment import check, fail, create_file, close_file import nfs_ops op = nfs_ops.NFS4ops() import nfs4lib
@@ -21,6 +21,8 @@ def testAllocateSupported(t, env): res = sess.compound([op.putfh(fh), op.allocate(stateid, 0, 1)]) check(res) + close_file(sess, fh, stateid=stateid) + def testAllocateStateidZero(t, env): """Do a simple ALLOCATE with all-zero stateid
@@ -31,10 +33,13 @@ def testAllocateStateidZero(t, env): sess = env.c1.new_client_session(env.testname(t)) res = create_file(sess, env.testname(t), access=OPEN4_SHARE_ACCESS_WRITE) fh = res.resarray[-1].object + stateid = res.resarray[-2].stateid res = sess.compound([op.putfh(fh), op.allocate(env.stateid0, 0, 1)]) check(res) + close_file(sess, fh, stateid=stateid) + def testAllocateStateidOne(t, env): """Do a simple ALLOCATE with all-one stateid
@@ -45,6 +50,9 @@ def testAllocateStateidOne(t, env): sess = env.c1.new_client_session(env.testname(t)) res = create_file(sess, env.testname(t), access=OPEN4_SHARE_ACCESS_WRITE) fh = res.resarray[-1].object + stateid = res.resarray[-2].stateid res = sess.compound([op.putfh(fh), op.allocate(env.stateid1, 0, 1)]) check(res) + + close_file(sess, fh, stateid=stateid)
Signature · 1 line
2.53.0
PATCH 2/5 pynfs: fix the check for delegated attribute support
In reply to Scott MayhewThe DELEG24 and DELEG25 tests should work regardless of whether the server supports delegated attributes or not. fattr4_supported_attrs is a bitmap4, so FATTR4_OPEN_ARGUMENTS needs to be shifted when checking to see if that bit is set. Fix it, and remove the now unnecessary check added by 3216fc3 ("pynfs: fix key error if FATTR4_OPEN_ARGUMENTS is not supported").
--- nfs4.1/server41tests/st_delegation.py | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
nfs4.1/server41tests/st_delegation.py +1 -4
@@ -345,10 +345,7 @@ def _testCbGetattr(t, env, change=0, size=0): OPEN4_SHARE_ACCESS_WRITE | OPEN4_SHARE_ACCESS_WANT_WRITE_DELEG) - if FATTR4_OPEN_ARGUMENTS not in caps: - fail("FATTR4_OPEN_ARGUMENTS not supported") - - if caps[FATTR4_SUPPORTED_ATTRS] & FATTR4_OPEN_ARGUMENTS: + if caps[FATTR4_SUPPORTED_ATTRS] & (1 << FATTR4_OPEN_ARGUMENTS): if caps[FATTR4_OPEN_ARGUMENTS].oa_share_access_want & OPEN_ARGS_SHARE_ACCESS_WANT_DELEG_TIMESTAMPS: openmask |= 1<<OPEN_ARGS_SHARE_ACCESS_WANT_DELEG_TIMESTAMPS
Signature · 1 line
2.53.0
PATCH 3/5 pynfs: remove erroneous test from DELEG24 and DELEG25
In reply to Scott Mayhewfattr4_time_deleg_modify is valid in CB_GETATTR and SETATTR. attrs2 contains the attributes from a GETATTR reply, and will never contain the fattr4_time_deleg_modify attribute.
---
Jeff - not sure what you want to do here. We can compare the the FATTR4_TIME_DELEG_MODIFY that we sent to the server with the FATTR4_TIME_MODIFY in attrs1 and/or attrs2, we just need to return it (or the whole cbattrs dictionary) from _testCbGetattr().
nfs4.1/server41tests/st_delegation.py | 6 ------ 1 file changed, 6 deletions(-)
nfs4.1/server41tests/st_delegation.py +0 -6
@@ -400,9 +400,6 @@ def testCbGetattrNoChange(t, env): fail("Bad size: %u != %u" % (attrs1[FATTR4_SIZE], attrs2[FATTR4_SIZE])) if attrs1[FATTR4_CHANGE] != attrs2[FATTR4_CHANGE]: fail("Bad change attribute: %u != %u" % (attrs1[FATTR4_CHANGE], attrs2[FATTR4_CHANGE])) - if FATTR4_TIME_DELEG_MODIFY in attrs2: - if attrs1[FATTR4_TIME_MODIFY] != attrs2[FATTR4_TIME_DELEG_MODIFY]: - fail("Bad modify time: ", attrs1[FATTR4_TIME_MODIFY], " != ", attrs2[FATTR4_TIME_DELEG_MODIFY]) def testCbGetattrWithChange(t, env): """Test CB_GETATTR with simulated changes to file
@@ -419,9 +416,6 @@ def testCbGetattrWithChange(t, env): fail("Bad size: %u != 5" % attrs2[FATTR4_SIZE]) if attrs1[FATTR4_CHANGE] == attrs2[FATTR4_CHANGE]: fail("Bad change attribute: %u == %u" % (attrs1[FATTR4_CHANGE], attrs2[FATTR4_CHANGE])) - if FATTR4_TIME_DELEG_MODIFY in attrs2: - if attrs1[FATTR4_TIME_MODIFY] == attrs2[FATTR4_TIME_DELEG_MODIFY]: - fail("Bad modify time: ", attrs1[FATTR4_TIME_MODIFY], " == ", attrs2[FATTR4_TIME_DELEG_MODIFY]) def testDelegReadAfterClose(t, env): """Test read with delegation stateid after close
Signature · 1 line
2.53.0
Jeff Layton
maintainerRe: [PATCH 3/5] pynfs: remove erroneous test from DELEG24 and DELEG25
Quoted 4 lines · Scott Mayhew
fattr4_time_deleg_modifyis valid inCB_GETATTRand SETATTR. attrs2 contains the attributes from a GETATTR reply, and will never contain thefattr4_time_deleg_modifyattribute.
Quoted 8 lines
Cc Jeff Layton <[email protected]>Signed-off-by Scott Mayhew <[email protected]>---
Jeff - not sure what you want to do here. We can compare the theFATTR4_TIME_DELEG_MODIFYthat we sent to the server with theFATTR4_TIME_MODIFYin attrs1 and/or attrs2, we just need to return it (or the whole cbattrs dictionary) from_testCbGetattr().
Doh! I don't know what I was thinking there.
That should compare FATTR4_TIME_MODIFY on both sides since they're both GETATTR results.
Nice catch!
Quoted 27 lines
nfs4.1/server41tests/st_delegation.py | 6 ------ 1 file changed, 6 deletions(-)nfs4.1/server41tests/st_delegation.py +0
-6@@ -400,9 +400,6 @@ def testCbGetattrNoChange(t, env): fail("Bad size: %u != %u" % (attrs1[FATTR4_SIZE], attrs2[FATTR4_SIZE])) if attrs1[FATTR4_CHANGE] != attrs2[FATTR4_CHANGE]: fail("Bad change attribute: %u != %u" % (attrs1[FATTR4_CHANGE], attrs2[FATTR4_CHANGE])) - if FATTR4_TIME_DELEG_MODIFY in attrs2: - if attrs1[FATTR4_TIME_MODIFY] != attrs2[FATTR4_TIME_DELEG_MODIFY]: - fail("Bad modify time: ", attrs1[FATTR4_TIME_MODIFY], " != ", attrs2[FATTR4_TIME_DELEG_MODIFY]) def testCbGetattrWithChange(t, env): """Test CB_GETATTR with simulated changes to file@@ -419,9 +416,6 @@ def testCbGetattrWithChange(t, env): fail("Bad size: %u != 5" % attrs2[FATTR4_SIZE]) if attrs1[FATTR4_CHANGE] == attrs2[FATTR4_CHANGE]: fail("Bad change attribute: %u == %u" % (attrs1[FATTR4_CHANGE], attrs2[FATTR4_CHANGE])) - if FATTR4_TIME_DELEG_MODIFY in attrs2: - if attrs1[FATTR4_TIME_MODIFY] == attrs2[FATTR4_TIME_DELEG_MODIFY]: - fail("Bad modify time: ", attrs1[FATTR4_TIME_MODIFY], " == ", attrs2[FATTR4_TIME_DELEG_MODIFY]) def testDelegReadAfterClose(t, env): """Test read with delegation stateid after close
Signature · 1 line
Jeff Layton <[email protected]>
PATCH 4/5 pynfs: _testCbGetattr() should check the delegation that was received
In reply to Scott MayhewIt currently assumes that if it requested an attribute delegation, then that's what it received. Better to actually check it instead.
--- nfs4.1/server41tests/st_delegation.py | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
nfs4.1/server41tests/st_delegation.py +4 -1
@@ -351,6 +351,9 @@ def _testCbGetattr(t, env, change=0, size=0): fh, stateid, deleg = __create_file_with_deleg(sess1, env.testname(t), openmask) print("__create_file_with_deleg: ", fh, stateid, deleg) + delegtype = deleg.delegation_type + if delegtype != OPEN_DELEGATE_WRITE_ATTRS_DELEG and delegtype != OPEN_DELEGATE_WRITE: + fail("Didn't get a write delegation.") attrs1 = do_getattrdict(sess1, fh, [FATTR4_CHANGE, FATTR4_SIZE, FATTR4_TIME_ACCESS, FATTR4_TIME_MODIFY])
@@ -362,7 +365,7 @@ def _testCbGetattr(t, env, change=0, size=0): if size > 0: cbattrs[FATTR4_SIZE] = size - if openmask & 1<<OPEN_ARGS_SHARE_ACCESS_WANT_DELEG_TIMESTAMPS: + if delegtype == OPEN_DELEGATE_WRITE_ATTRS_DELEG: cbattrs[FATTR4_TIME_DELEG_ACCESS] = attrs1[FATTR4_TIME_ACCESS] cbattrs[FATTR4_TIME_DELEG_MODIFY] = attrs1[FATTR4_TIME_MODIFY] if change != 0:
Signature · 1 line
2.53.0
PATCH 5/5 pynfs: add delegation test for CB_GETATTR after sync WRITE
In reply to Scott MayhewDELEG27 tests the scenario where a client has written data to the server while holding a write delegation, but is not *currently* holding modified data in its cache.
In this case, the CB_GETATTR should not trigger an mtime update (the time_modify that client1 gets in the GETATTR after the WRITE should match the time_modify it gets in the GETATTR in the DELEGRETURN compound).
---
This test currently passes if nfsd has delegated timestamps enabled and fails if it does not have them enabled (nfsd-next commit "nfsd: add a runtime switch for disabling delegated timestamps" comes in handy for testing).
I posted the following kernel patch which fixes this failure:
https://lore.kernel.org/linux-nfs/[email protected]/T/#u
nfs4.1/server41tests/st_delegation.py | 152 ++++++++++++++++++++++++++ 1 file changed, 152 insertions(+)
nfs4.1/server41tests/st_delegation.py +152 -0
@@ -8,6 +8,8 @@ import nfs_ops op = nfs_ops.NFS4ops() import nfs4lib import threading +import copy +import time def _got_deleg(deleg): return (deleg.delegation_type != OPEN_DELEGATE_NONE and
@@ -470,3 +472,153 @@ def testDelegReadAfterClose(t, env): # cleanup: return delegation res = sess1.compound([op.putfh(fh), op.delegreturn(delegstateid)]) check(res) + +def testCbGetattrAfterSyncWrite(t, env): + """Test CB_GETATTR after a FILE_SYNC4 WRITE + + 1. Client 1 opens a file (getting a write deleg or a write attrs deleg) and + does a GETATTR + 2. Client 1 does a FILE_SYNC4 WRITE. If we got a write delegation, it + follows this up with a GETATTR. Otherwise we got a write attrs deleg + and we construct the attrs ourself. + 3. Client 2 does a GETATTR, triggering a CB_GETATTR to client 1. Client 2 + then does an OPEN, triggering a CB_RECALL to client 1. + 4. Client 1 does a PUTFH|SETATTR|GETATTR|DELEGRETURN if we have a write + attrs deleg, otherwise it does a PUTFH|GETATTR|DELEGRETURN. + + time_modify should only change between steps 1 and 2. It should not change + from steps 2 thru 4. + + FLAGS: deleg all + CODE: DELEG27 + """ + cb = threading.Event() + cbattrs = {} + def getattr_post_hook(arg, env, res): + res.obj_attributes = cbattrs + env.notify = cb.set + return res + + recall = threading.Event() + def recall_pre_hook(arg, env): + recall.stateid = arg.stateid + recall.cred = env.cred.raw_cred + env.notify = recall.set + def recall_post_hook(arg, env, res): + return res + + size = 5 + + sess1 = env.c1.new_client_session(b"%s_1" % env.testname(t)) + sess1.client.cb_post_hook(OP_CB_GETATTR, getattr_post_hook) + sess1.client.cb_pre_hook(OP_CB_RECALL, recall_pre_hook) + sess1.client.cb_post_hook(OP_CB_RECALL, recall_post_hook) + + res = sess1.compound([op.putrootfh(), + op.getattr(nfs4lib.list2bitmap([FATTR4_SUPPORTED_ATTRS, + FATTR4_OPEN_ARGUMENTS]))]) + check(res) + caps = res.resarray[-1].obj_attributes + + openmask = (OPEN4_SHARE_ACCESS_READ | + OPEN4_SHARE_ACCESS_WRITE | + OPEN4_SHARE_ACCESS_WANT_WRITE_DELEG) + + if caps[FATTR4_SUPPORTED_ATTRS] & (1 << FATTR4_OPEN_ARGUMENTS): + if caps[FATTR4_OPEN_ARGUMENTS].oa_share_access_want & OPEN_ARGS_SHARE_ACCESS_WANT_DELEG_TIMESTAMPS: + openmask |= 1<<OPEN_ARGS_SHARE_ACCESS_WANT_DELEG_TIMESTAMPS + + fh, stateid, deleg = __create_file_with_deleg(sess1, env.testname(t), openmask) + delegtype = deleg.delegation_type + if delegtype != OPEN_DELEGATE_WRITE_ATTRS_DELEG and delegtype != OPEN_DELEGATE_WRITE: + fail("Didn't get a write delegation.") + delegstateid = deleg.write.stateid + + attrs1 = do_getattrdict(sess1, fh, [FATTR4_CHANGE, FATTR4_SIZE, + FATTR4_TIME_ACCESS, FATTR4_TIME_MODIFY]) + + cbattrs[FATTR4_CHANGE] = attrs1[FATTR4_CHANGE] + cbattrs[FATTR4_SIZE] = attrs1[FATTR4_SIZE] + + env.sleep(1) + res = write_file(sess1, fh, b'z' * size, 0, delegstateid) + check(res) + + if delegtype == OPEN_DELEGATE_WRITE_ATTRS_DELEG: + attrs2 = copy.deepcopy(attrs1) + now = divmod(time.time_ns(), 1000000000) + attrs2[FATTR4_TIME_ACCESS] = nfstime4(*now) + attrs2[FATTR4_TIME_MODIFY] = nfstime4(*now) + cbattrs[FATTR4_TIME_DELEG_ACCESS] = nfstime4(*now) + cbattrs[FATTR4_TIME_DELEG_MODIFY] = nfstime4(*now) + else: + attrs2 = do_getattrdict(sess1, fh, [FATTR4_CHANGE, FATTR4_SIZE, + FATTR4_TIME_ACCESS, FATTR4_TIME_MODIFY]) + + # No need to bump FATTR4_CHANGE because we've already flushed our data + cbattrs[FATTR4_SIZE] = size + + sess2 = env.c1.new_client_session(b"%s_2" % env.testname(t)) + slot = sess2.compound_async([op.putfh(fh), + op.getattr(1<<FATTR4_CHANGE | + 1<<FATTR4_SIZE | + 1<<FATTR4_TIME_ACCESS | + 1<<FATTR4_TIME_MODIFY)]) + + completed = cb.wait(2) + if not completed: + fail("CB_GETATTR not received") + + res = sess2.listen(slot) + check(res) + attrs3 = res.resarray[-1].obj_attributes + + claim = open_claim4(CLAIM_NULL, env.testname(t)) + owner = open_owner4(0, b"owner") + how = openflag4(OPEN4_NOCREATE) + open_op = op.open(0, OPEN4_SHARE_ACCESS_WRITE, + OPEN4_SHARE_DENY_NONE, owner, how, claim) + slot = sess2.compound_async(env.home + [open_op, op.getfh()]) + completed = recall.wait(2) + if not completed: + fail("CB_RECALL not received") + + env.sleep(.1) + + # Note if we have a write attrs deleg we should do a setattr before the + # delegreturn (see RFC 9754, section 5) + res = sess1.compound([op.putfh(fh), + *([op.setattr(delegstateid, + {FATTR4_TIME_DELEG_ACCESS: cbattrs[FATTR4_TIME_DELEG_ACCESS], + FATTR4_TIME_DELEG_MODIFY: cbattrs[FATTR4_TIME_DELEG_MODIFY]})] + if delegtype == OPEN_DELEGATE_WRITE_ATTRS_DELEG else []), + op.getattr(1<<FATTR4_CHANGE | + 1<<FATTR4_SIZE | + 1<<FATTR4_TIME_ACCESS | + 1<<FATTR4_TIME_MODIFY), + op.delegreturn(delegstateid)]) + check(res) + attrs4 = res.resarray[-2].obj_attributes + + res = sess2.listen(slot) + check(res, [NFS4_OK, NFS4ERR_DELAY]) + if res.status == NFS4_OK: + fh2 = res.resarray[-1].object + stateid2 = res.resarray[-2].stateid + else: + fh2 = None + stateid2 = None + + close_file(sess1, fh, stateid=stateid) + if fh2 is not None and stateid2 is not None: + close_file(sess2, fh2, stateid=stateid2) + + #print(f"attrs1: size {attrs1[FATTR4_SIZE]} change {attrs1[FATTR4_CHANGE]} mtime {attrs1[FATTR4_TIME_MODIFY]}") + #print(f"attrs2: size {attrs2[FATTR4_SIZE]} change {attrs2[FATTR4_CHANGE]} mtime {attrs2[FATTR4_TIME_MODIFY]}") + #print(f"attrs3: size {attrs3[FATTR4_SIZE]} change {attrs3[FATTR4_CHANGE]} mtime {attrs3[FATTR4_TIME_MODIFY]}") + #print(f"attrs4: size {attrs4[FATTR4_SIZE]} change {attrs4[FATTR4_CHANGE]} mtime {attrs4[FATTR4_TIME_MODIFY]}") + + if (attrs2[FATTR4_TIME_MODIFY].seconds != attrs4[FATTR4_TIME_MODIFY].seconds + or attrs2[FATTR4_TIME_MODIFY].nseconds != attrs4[FATTR4_TIME_MODIFY].nseconds): + fail(f"mtime after write ({attrs2[FATTR4_TIME_MODIFY]}) != " + f"mtime from delegreturn ({attrs4[FATTR4_TIME_MODIFY]})")
Signature · 1 line
2.53.0