Skip to contentSkip to conversation

m68k: Fix task info flags handling for 68000

PATCH In review Daniel Palmer 2 participants 2 messages Apr 4

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 m68k: Fix task info flags handling for 68000

The logic for deciding what to do after a syscall should be checking if any of the lower byte bits are set and then checking if the reschedule bit is set.

Currently we are loading the top word, checking if any bits are set (which never seems to be true) and thus jumping over loading the whole long and checking if the reschedule bit is set.

We get the thread info in two places so split that logic out in a macro and then fix the code so that it loads the byte of the flags we need to check, checks if anything is set and then checks if the reschedule bit in particular is set.

---
v2: Only load the lower byte of the flags as that's all we need.
This change was suggested by Greg and I tested it still works.

 arch/m68k/68000/entry.S | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)
arch/m68k/68000/entry.S +13 -8
index 72e95663b62f..c257cc415c47 100644
@@ -18,6 +18,13 @@
 
 .text
 
+/* get thread_info pointer into a2 */
+ .macro getthreadinfo
+	movel	%sp,%d1
+	andl	#-THREAD_SIZE,%d1
+	movel	%d1,%a2
+ .endm
+
 .globl system_call
 .globl resume
 .globl ret_from_exception
@@ -70,9 +77,8 @@ ENTRY(system_call)
 
 	movel	%sp@(PT_OFF_ORIG_D0),%d0
 
-	movel	%sp,%d1			/* get thread_info pointer */
-	andl	#-THREAD_SIZE,%d1
-	movel	%d1,%a2
+	/* Doing a trace ? */
+	getthreadinfo
 	btst	#(TIF_SYSCALL_TRACE%8),%a2@(TINFO_FLAGS+(31-TIF_SYSCALL_TRACE)/8)
 	jne	do_trace
 	cmpl	#NR_syscalls,%d0
@@ -96,16 +102,15 @@ Luser_return:
 	/* heavy interrupt load*/
 	andw	#ALLOWINT,%sr
 
-	movel	%sp,%d1			/* get thread_info pointer */
-	andl	#-THREAD_SIZE,%d1
-	movel	%d1,%a2
+	getthreadinfo
 1:
-	move	%a2@(TINFO_FLAGS),%d1	/* thread_info->flags */
+	/* check if any of the flags are set */
+	moveb	%a2@(TINFO_FLAGS + 3),%d1	/* thread_info->flags (low 8 bits) */
 	jne	Lwork_to_do
 	RESTORE_ALL
 
 Lwork_to_do:
-	movel	%a2@(TINFO_FLAGS),%d1	/* thread_info->flags */
+	/* check if reschedule needs to be called */
 	btst	#TIF_NEED_RESCHED,%d1
 	jne	reschedule
 
Signature · 1 line
2.51.0
maintainer
#1 lore raw

Hi Daniel,

Quoted 13 lines · Daniel Palmer

The logic for deciding what to do after a syscall should be checking if any of the lower byte bits are set and then checking if the reschedule bit is set.

Currently we are loading the top word, checking if any bits are set (which never seems to be true) and thus jumping over loading the whole long and checking if the reschedule bit is set.

We get the thread info in two places so split that logic out in a macro and then fix the code so that it loads the byte of the flags we need to check, checks if anything is set and then checks if the reschedule bit in particular is set.

Quoted 5 lines

---
v2: Only load the lower byte of the flags as that's all we need.
This change was suggested by Greg and I tested it still works.

Thanks for taking care of this.
I have pushed into the m68knommu git tree for-next branch.

Regards
Greg

Quoted 54 lines
  arch/m68k/68000/entry.S | 21 +++++++++++++--------
  1 file changed, 13 insertions(+), 8 deletions(-)
arch/m68k/68000/entry.S +13 -8
index 72e95663b62f..c257cc415c47 100644
@@ -18,6 +18,13 @@
 
  .text
 
+/* get thread_info pointer into a2 */
+ .macro getthreadinfo
+	movel	%sp,%d1
+	andl	#-THREAD_SIZE,%d1
+	movel	%d1,%a2
+ .endm
+
  .globl system_call
  .globl resume
  .globl ret_from_exception
@@ -70,9 +77,8 @@ ENTRY(system_call)
 
  	movel	%sp@(PT_OFF_ORIG_D0),%d0
 
-	movel	%sp,%d1			/* get thread_info pointer */
-	andl	#-THREAD_SIZE,%d1
-	movel	%d1,%a2
+	/* Doing a trace ? */
+	getthreadinfo
  	btst	#(TIF_SYSCALL_TRACE%8),%a2@(TINFO_FLAGS+(31-TIF_SYSCALL_TRACE)/8)
  	jne	do_trace
  	cmpl	#NR_syscalls,%d0
@@ -96,16 +102,15 @@ Luser_return:
  	/* heavy interrupt load*/
  	andw	#ALLOWINT,%sr
 
-	movel	%sp,%d1			/* get thread_info pointer */
-	andl	#-THREAD_SIZE,%d1
-	movel	%d1,%a2
+	getthreadinfo
  1:
-	move	%a2@(TINFO_FLAGS),%d1	/* thread_info->flags */
+	/* check if any of the flags are set */
+	moveb	%a2@(TINFO_FLAGS + 3),%d1	/* thread_info->flags (low 8 bits) */
  	jne	Lwork_to_do
  	RESTORE_ALL
 
  Lwork_to_do:
-	movel	%a2@(TINFO_FLAGS),%d1	/* thread_info->flags */
+	/* check if reschedule needs to be called */
  	btst	#TIF_NEED_RESCHED,%d1
  	jne	reschedule